Windows Simulator not starting

Hello,
I am running VS 2013 Prof Update 4. When I run my app on the simulator it does not start the app and the simulator keeps loading forever. I have tried some of the steps mentioned in few other posts but nothing helped. I was facing this issue on VS 2013 Update
2 also. Please let me know what is the cause of this problem and how to solve this.

Hello,
>>When I run my app on the simulator it does not start the app and the simulator keeps loading forever
What app are you trying to start? If it is windows phone application, I think the window phone forum is more appropriate:
https://social.msdn.microsoft.com/Forums/windowsapps/en-US/home?forum=wpdevelop
Or you could post it to the Visual Studio forum since as far as I know, the simulator is a tool of Visual Studio:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?category=visualstudio
The current forum is for discussing general issues about developing applications for Windows.uss general issues about developing applications
for Windows.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

Windows could not start the FLEXnet Licensing Service service on Local Computer Error 1068: The dependency service or group failed to start.

Today I installed Adobe Director 11.5. I received a couple of errors in the FLEXnet Licensing Service. It looks It could not start. I tried to download the Licence fix what I found on Google but that doesn't work, so I checked the 'Service' at service (windows).
It's status is empty. When I double click on the FLEXnet Licensing Service, clicked on start at the opened window and an error is coming:
Windows could not start the FLEXnet Licensing Service service on Local Computer
Error 1068: The dependency service or group failed to start.
I don't understand what it says with this message, only that it is impossible to start. However, that is not what I am trying of course, I want to start the FLEXnet Licensing Service, service.
Re-installing of the software, doesn't make any change. How can I start it so Director is also working?

Hi Don1233,
Please consider seek help at the software vendor side.
For the services didn't start, follow the suggestions posted by Elton in the thread below:
https://social.technet.microsoft.com/Forums/en-US/e35da253-f0df-41d1-8df2-b73fa54742a0/windows-could-not-start-the-flexnet-licensing-service-service-on-local-computer-error-1068-the?forum=w7itproinstall
Best regards
Michael Shao
TechNet Community Support

I have a Pavilion dv7-1050ea with windows vista home premium 32bit.Windows will not start

Windows will not start in safe mode just back to blue screen error. HP recovory disks not working even in external drive. no access to command prompt. unable to install or run programs or copy any files to the hard drive. ran start up tests Memorypassed Primery hard disc passed Hard disk passed smart hard disc passed.

I would recommend performing a system recovery.
Here is a link with the information that is needed to perform this: http://goo.gl/bbxlv
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

"Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"

Using Windows 8.1 Pro on Toshiba Satellite i7 Laptop with 8Gb Ram
After upgrade from Windows 8 Pro to 8.1 Pro, the Offline Files/CSC service refuses to start and gives the error message:
"Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"
Before the upgrade, offline files worked fine... how do I re-enable offline files?

I had a similar issue - couldn't make any files available offline.
I found that the offline folder service would not start
This was because the CSC permission were totally screwed. I had to take ownership of each folder and file, one by one, then grant everyone full access.
then delete the full contents of the CSC folder
format the CSC database using the registry fix then reboot
in control panel, disable the offline files, reboot, then re-enable. and now its working :)
2hrs to resolve this, with grateful thanks to this thread and some others.
damn windows8

Error: We apologize for the inconvenience but Windows did not start successfully

when i open my desktop computer,it dosent start up normal
i get this message
( we apologize for the inconvenience ,but windows did not start successfully. a recent hardware or software change might have caused this.
If your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose Last Known Good Configuration
to revert to the most recent settings that worked.
If a previous startup attempt was interrupted due to a power of failure or because the Power or Reset button was pressed, or if you aren’t sure what caused
the problem, choose Start Windows Normally.
Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Last Known Good Configuration (your most recent settings that worked)
Start Windows Normally

Try starting in Safe Mode. Once it is up and running, do a normal restart and then see if it will work. Many times this is all that I have had to do to get it working again. If not, then repost with more details.
Please do not read this sentence. Please ignore the previous sentence.

HT4839 the iPhone Configuration Utility 3.6/2.2 for Windows will not start up/load anymore.

Hello.
the iPhone Configuration Utility 3.6 for Windows will not start up/load anymore.
It worked fine at first, then I tried to start it up today and I got an error:
failed to create an ipc port access is denied
Now there is no message at all. Just wont launch.
I find NO support at Apple. I have seen about 20 other cries for help on these forums and no seems to have received any help for this. Does anyone know how to get this Utility working?
I am using Windows XP SP3
I have tried upgrdading to .NET 4 SP1 from .NET 3.5 SP1 and that didnt work so went back the other way and still no change.
I tried completely uninstalling and deleting all references in Regedit and reinstalling from the start about 4 times.
I tried completely uninstalling and then going back to an older version (2.2) and it doesn't work either.
Unfortunately there is no help on Apply that I can find and trying to find an -actual email support for Apple software or products is a joke- (man, nothing is more aggravating when you need product help and the provider hides or completely does away with any way to contact them for help ro sends you on an hour long search for it...)
I need to get this working as I am providing an easy iphone configure for my VPN service. Can anyone help?
THanks!!
Tres

Hello.
the iPhone Configuration Utility 3.6 for Windows will not start up/load anymore.
It worked fine at first, then I tried to start it up today and I got an error:
failed to create an ipc port access is denied
Now there is no message at all. Just wont launch.
I find NO support at Apple. I have seen about 20 other cries for help on these forums and no seems to have received any help for this. Does anyone know how to get this Utility working?
I am using Windows XP SP3
I have tried upgrdading to .NET 4 SP1 from .NET 3.5 SP1 and that didnt work so went back the other way and still no change.
I tried completely uninstalling and deleting all references in Regedit and reinstalling from the start about 4 times.
I tried completely uninstalling and then going back to an older version (2.2) and it doesn't work either.
Unfortunately there is no help on Apply that I can find and trying to find an -actual email support for Apple software or products is a joke- (man, nothing is more aggravating when you need product help and the provider hides or completely does away with any way to contact them for help ro sends you on an hour long search for it...)
I need to get this working as I am providing an easy iphone configure for my VPN service. Can anyone help?
THanks!!
Tres

Windows will not start on my NB100

I think my nb100 has become infected with a virus. It was doing some strange virus scan and I could get it to do nothing else. I turned it off and now Windows will not start. I have tried all the option; safe mode, safe mode with command prompt etc. but nothing works. I cannot run the product recovery disk because this netbook does not have a cd drive. Can anyone help?

> . How do I make a bootable USB drive?
You can make a bootable usb drive in 2 ways:
1. Manually with command prompts
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=53324&tstart=60
2 Automatically using programs like WinSetupFromUSB or Novicorp WinToFlash
http://myeeeguides.wordpress.com/2008/11/15/winsetupfromusb-install-windows-xp-from-usb-flash-drive/
Message was edited by: Jeka-??

P6 windows does not start at times. Other times programs stops responding and then whole lot sraches

p6 windows does not start sometimes at times it does progarams stop responding. The whole lot has crashed twice needing me to do a recovery. What is going on. The computer is slow this time after doing a system recovery

@Harty,
In your very first post you stated, this issue started after a system recovery, how long ago did you do the recovery?
Please respond back at your earliest convenience.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

BLACK SCREEN stating "windows could not start because the following is miss

I installed Bootcamp update 2.1 and then XP SP3.
Now when I start up my Mac I am getting a BLACK SCREEN stating "windows could not start because the following is missing or corrupt: <windows root>\system 32-hal.dll Please re-installl a copy of hte above file"
I tried to use the option key and insert the Windows CD but it won't start up.
Also, when I start up I must use the option key and select the Mac OS and it will start up and everything is fine there. Advice appreciated.

Did you ever solve this? I had updated to BC 2.1 (After updating Apple Software Update al on the Windows side) I waited & just tonight tried to install SP-3. It appeared to install & When I was prompted to restart--I also got the black screen. Mine said:
Windows could not start because the following file is missing or corrupt:\Windows\inf\biosinfo.inf
You can attempt to repair the file by starting Windows setup using the original setup CD-ROM. Select ‘r’ at the 1st screen to repair.
I just force powered off & booted into Mac.
I think I need to restart my Mac into Windows (using the Option key ) WHILE THE WINDOWS XP CD is in the optical Drive. Then maybe I’ll get a choice to select ‘r’ to repair at the 1st screen?
You may need to do essentially the same thing. I do not know if this problem is a boot camp problem of just a Windows problem.
Sure is annoying,
Good luck!

Windows could not start because the following file is missing or corrupt. Windows root\system32\hal.dll.

Windows could not start because the following file is missing or corrupt. Windows root\system32\hal.dll. anyone can help

Have a read here http://support.microsoft.com/kb/314477/en-us
Maybe it helps
Stefan

Windows could not start HomeGroup Listener

Windows could not start HomeGroup Listener on. Local Computer. For more.... service-specific error code-2147023817. I have also a problem with the home group provider. . I have tried nearly every thing. ....i cannot join the home group. thanks

Dont think that this has something to do with the Toshiba notebook.
It looks more like Microsoft issue.
Found this discussion in the Microsoft forum:
http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/453c3e1d-a980-417c-a6e6-d4c5c1af79a1
_Someone wrote there:_
+For those of you who couldn't startHomeGroup Listener and HomeGroup Provider service make sure these services are started and set to automatic:+
+-Function Discovery Provider Host+
+-Function Discovery Resource Publication+
+(Enable in following order):+
+-Peer Networking Identity Manager+
+-Peer Name Resolution Protocol+
+-Peer Networking Grouping+
+If these services are disabled it may be the reason why you couldn't create a homegroup.+

Windows does not start at boot

Hello,
Windows does not start at boot, how? 'Safe Mode either )

If your system is not properly booting then you must press F8 when start the system then there are two option
Repair Window,start window normally if not properly work then you will install again operating system.

Windows could not start the distributed transaction coordinator service on local computer

Dear All,
I'm having an issue starting the DTC service in windows 7 OS. I always got the error message below when im trying to start it.
"Windows could not start the distributed transaction coordinator service on local computer"
Thanks,
Melvin

Hi Melvin,
Please try the following methods to solve this issue:
Method 1: Re-create the MS DTC log, and then restart the service.
Click
Start, type cmd in the search box, and then press
Enter.
Type the command
msdtc -resetlog at the command prompt, and then press
Enter.
Warning: The msdtc -resetlog command can cause data corruption if it is used incorrectly. Make sure that you do not have any pending transactions when you run this
command.
Type the command net start msdtc, and then press
Enter.
Method 2: Set the logon account permissions for the MS DTC service
If Method 1 does not resolve the problem, set the logon account for the MS DTC service to have read and write permissions for the Msdtc.log file. Please follow the steps below:
Click
Start, type cmd in the search box, and then press
Enter.
Type the command
control admintools at the command prompt, and then press
Enter.
Double-click
Services.
In the Services pane, locate
Distributed Transaction Coordinator.
In the
Log On As column, note the account name. Note: The default logon account for the MS DTC service is the NETWORK SERVICE account.
Start Windows Explorer, and
then open the %windir%\System32\Msdtc folder.
Right-click the
Msdtc.log file, and then click Properties.
Click the
Security tab.
Click the logon account name that you noted
in step 5. For example, click the NETWORK SERVICE account name.
In the
Permissions pane, click to select the Allow check box for the following permissions: ◦Read & Execute
◦Read    ◦Write
Click
OK.
Click
Yes to accept the security warning.
In the
Services pane, right-click Distributed Transaction Coordinator, and then click
Start.
Method 3: Assign permissions to the NETWORK service to traverse the directory tree
Determine whether the NETWORK service has permissions to traverse through the folder. To do this, follow these steps.
Note: By default, the "Everyone" group has these permissions. For more information, go to the following Microsoft TechNet website:
Bypass traverse checking
Click
Start, type secpol.msc in the search box, and then press
Enter.
Browse through the following computer configuration:
        \Windows Settings\Security Settings\Local Policies\User Rights Assignment
Check for "Bypass traverse checking," and then add the "Everyone" group.
Update the Group Policy settings on the computer. To do this, click
Start, type gpupdate in the search box, and then press
Enter.
In the
Services pane, right-click Distributed Transaction Coordinator, and then click
Start.
Regards,
Lany Zhang

Windows could not start the Network Location Awareness service on Local computer

i have a dell inspiron 1501 laptop running windows vista home premium media center edition. i have recently been getting an error when trying to view networked computer saying "connection status: unknown" and "the dependency service or group failed to start". i started by disabling and re-enabling the driver and that did not help. i then brought up the services.msc thing and started looking at the networking services. i noticed that the Network Location Awareness service was not started so i tried to start it. i got a popup message saying "Windows could not start the Netwrok Location Awareness service on Local Computer. Error 0xc000096: 0xc0000096".
i also get an error popup when i try to start the Network List service saying "Windows could not start the Network List Service service on Local Computer. Error 1068: The dependency service or group failed to start".
what might i have done to make this happen and what can i do to try to fix it?
haus

Hi,
Thank you for the post.
I fully understand the inconvenience the issue has been caused and the current situation can be frustrating. Please try the following steps for troubleshooting.
1. Please start the computer in Safe Mode with Network and check the result. If the issue disappears, please perform a clean boot.
For the detailed steps, please refer to the step 1 and 2 in the KB article 936214 (http://support.microsoft.com/kb/936214).
2. If the issue persists, please check the system file by using the command SFC /scannow.
For more information, please refer to the KB article 929833 (http://support.microsoft.com/kb/929833).
If the above suggestions do not resolve the issue that service fails to start up, please understand that debug and dump analysis may be required for further troubleshooting. Also, in most cases, it is necessary to check the source codes. However, debugging is out of our forum’s support boundary. A support call to our product service team is needed for the debugging service. In this case, I’d like to suggest contacting Microsoft Customer Support Service (CSS) for assistance so that this issue can be resolved efficiently.
To obtain the phone numbers for specific technology request, please check the website listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS
Thank you for your understanding.
Sincerely,
Joson Zhou
Microsoft Online Community Support

Windows could not start the DHCP Client service on Local Computer, Error 2

Hi everyone,
I assign IP addresses via my router but today installed OpenVPN and it depends on the DHCP Client service. I checked in services and found it wasn't running. If I try starting it I get this message "Windows could not start the DHCP Client
service on Local Computer." "Error 2: The system cannot find the file specified.".
There's plenty of info out there about this issue but nothing seems to fix it for me. I've tried the following as an administrator,
"sfc /scannow" - It reported and error which it fixed but after a restart the problem persists.
"NET LOCALGROUP administrators "NT Authority\Local Service" /add"
"netsh winsock reset catalog"
I also checked that all dependencies of the DHCP Client service are working. I used "CMD /K
SC QC DHCP" to check the dependencies and compared them to an identical computer and they are. Hope someone can help. Thanks in advance.

Hi,
Did you mean after the restart the sfc /scannow command still could find the corrupted files?
Have you check this these related registry entries permission for your account?
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dhcp
permission needed: Query value, Create value, Enumerate Subkeys, Notify, Read Control
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dhcp\Configurations
permission needed: Full Control, Read
for more information, read this article:
Some services do not start in Windows Vista and Windows 7
https://support.microsoft.com/kb/943996?wa=wsignin1.0
If the issue still cannot be resolved, I would like to suggest you use the recovery media to repair your computer.
Karen Hu
TechNet Community Support

Windows Simulator not starting

Similar Messages

Maybe you are looking for