Windows Small Business Server 2011 Essentials - Restore Whole RD Website On IIS

I Have Very Little Knowledge In IIS/IIS 7.5
Recently, I tried to add Spiceworks into my Small Business Server Website as a Sub Directory such as http://websitename.com/spiceworks
this did not work, but while doing this I have messed up the SBS Remote Web Access Site. I tried to remove and add the IIS Server Role in Server Manager, this gave no luck what so ever, I then tried to delete the Mac, Certificate and Default Web Site from
IIS MMC Snap-in and re-add them, they did not work and I'm not sure where they are located. I do not have Exchange OWA or Sharepoint installed, I only have Spiceworks running on it's own web server under port 9877 and all the Microsoft SBS Software from the
install.
I cannot not access any website including the Client Connect, Main Website and the Spiceworks website at all.
I don't really want to Format and Install SBS again as it was difficult to get it installed and I have about 1TB of data what would have to be moved else where. Is there any way on how I can restore the whole website back to a fresh install state?
And sorry, Backup Drive has failed so no backups currently.
Thanks In Advance, If You need any more infomation or an email address, I am happy to help.

You have Exchange and Sharepoint installed on SBS Essentials?
If you have SBS Standard there is an easy repair.
Can you confirm which OS you have?
Robert Pearman SBS MVP | www.titlerequired.com | www.itauthority.co.uk
sorry for the late reply and No i do not have exchange or sharepoint installed and I have SBS Essentials 2011.

Similar Messages

How to upgrade windows small business server 2011 essentials to windows small business server 2011 standard

how to upgrade windows small business server 2011 essentials to windows small business server 2011 standard(OEM system Builder Pack)?

Hi,
Based on my experience, there is no upgrade path for OEM licensing. In addition, only SBS 2008 Standard can upgrade to SBS 2011 Standard, and there is no path to so
that from SBS 2011 Essentials. I am sorry to say that you may need a migration instead of an upgrade.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Windows Small Business Server 2011 Essentials Dashboard Problems

I'm having a problem on a Windows Small Business Server 2011 Essentials Server. The Dashboard has stopped working correctly. The Dashboard loads fine but once it loads there is not data visible. Under the different tabs there are no User accounts listed,
Server Folders, Hard Drives, etc. When trying to add a new user we get the following error message:
"There was a problem adding the user account
Cannot create the user account. Please restart the Add a User Account Wizard, and then try again."
The next message is:
"There was a problem adding the user account.
The Add a User Account Wizard cannot communicate with the server storage system. If you continue to experience this problem, it may help to restart the server. If the problem persists, contact a computer support profssional, or visit the Microsoft Web site
at http://go.microsoft.com/fwlink/?LinkId=154454 and search for related information."
Any possible ideas or suggestions would be appreciated. Thanks.
Tech Services Group, LLC

Can you check which certificates you have under the local computer>personal store
in the MMC > Certificates > Local Computer
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

Small Business Server 2011 Essentials Remote Web Access fails to connect to Windows 8.1 PC

I am using Remote Web Access (RWA) gateway with Small Business Server 2011 Essentials.
There are several workstations all running Windows 7, and have been using RWA without an issue for well over a year.
There is now a Windows 8.1 Pro PC added to this domain, but the Remote Desktop does not connect.
The Windows 8.1 PC appears in the RWA pages, It requests the credentials to connect, and then fails with the following error:
Remote Desktop can't find the remote computer "COMPUTERNAME". This might mean that the "COMPUTERNAME" does not belong to the specified network. Verify the computer name and domain that you are typing to connect to.
I can connect to all other PC fine (running Windows 7). I have tried from different locations and PC's and the results are the same.
I thought I had fixed this problem a few weeks back. After running all updates on the server and Windows 8.1 PC, and rebooting both, the RDP worked, but I think it only worked once and then failed the next time someone tried to use it. I have not had
a successful connection to the Windows 8.1 PC since.
I am at a loss on how to troubleshoot this as there are no errors on the system which can't be accessed.
Any suggestions will be appreciated.

Hi Mr Cheese,
à
I turned off the Firewall on the Windows 8.1 PC and the RDP is now working.
Thanks for sharing in the forum. Your time and efforts are highly appreciated.
Based on your description, this issue is related to Firewall. Would you please let me know current situation
of this issue?
Just addition. Please open Control Panel, select Windows Firewall and click Allow an app or feature through
Windows Firewall. Then please check if Remote Desktop is allowed. Meanwhile, please click Advanced settings in Windows Firewall panel and click Inbound Rules, then check if rules which be related to Remote Desktop were enabled.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Connecting to Windows Small Business Server 2011 Standard

Company recently upgraded from an old server to Windows Small Business Server 2011 Standard. I would like to connect to a MS Exchange acct remotely through Entourage. I have used the settings provided by the IT dept but they are not working. Any suggestions?
Thanks!

Hi,
Based on my experience, there is no upgrade path for OEM licensing. In addition, only SBS 2008 Standard can upgrade to SBS 2011 Standard, and there is no path to so
that from SBS 2011 Essentials. I am sorry to say that you may need a migration instead of an upgrade.
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Windows Small Business Server 2011 Standard CPU Limitation

How many CPU's can be used with Windows Small Business Server 2011 Standard? Is there a limitation to the number of cores per CPU?

Hi,
for SBS 2011 standard the limit is 4 sockets, no specific limit set for cores.
SYSTEM REQUIREMENTS SBS 2011
1.4 GHz x64 processor or 1.3 GHz dual-core processor
Up to 2 sockets (SBS 2011 Essentials) or 4 sockets (SBS 2011 Standard)
RAM: 2GB min / 4 GB rec / 32 GB max (SBS 2011 Essentials)
RAM: 8GB min / 10 GB rec / 32 GB max (SBS 2011 Standard)
160 GB min disk space (SBS 2011 Essentials)
120 GB min disk space (SBS 2011 Standard)
10/100 Network Interface Card
more information:
http://www.microsoft.com/sbs/en/us/system-requirements.aspx
Regards Ronny
Visit my Blog or follow me on
Twitter

OSX 10.9 compatibility with Windows Small Business Server 2011?

Hi
I'm hoping someone here may be able to help me as our external server guys have been particularly unhelpful!
I'm the only Mac on a Windows server, which has recently been upgraded (??) to Windows Small Business Server 2011. I've recenty upgraded the work iMac to 10.9, but ever since the server change, I'm having intermittent dificulties saving files. Often, I get and error saying the file cannot be saved as I don't have permission to access the folder - which then worryingly REMOVES the file I'm trying to overwrite WITHOUT WARNING.
If I'm using Photoshop save for web, I get errors when clicking 'Save' to say that it can't, but does save the file, plus a second with a gibberish file name.
Most worryingly though, is that now on two occasions caused the iMac to crash and shutdown immediately, which is not good at all. Once was moving a file to overwrite another in the Finder, the second (today) was saving from Illustrator.
I'd noticed weird things with our old 2003 server before the switch and when I was still on 10.6 - mainly that my iMac was slow when connected (Adobe apps etc opened in a flash when unconnected, but took minutes when plugged in), but now I'm on 10.9 and the new server installed, these saving issues have arisen. (I ended up wiping the Mac and completely reinstalling everything to cure that slowness issue - never did find out what it was!).
The server guys are adamant that this has nothing to do with the server, and is all linked to my iMac - personally I'm not so sure, but I'm asking here to see if anyone else has had issues? It seems like some kind of permission problem? Do I need any special network settings for it to play nicely with the Windows server? My internet, email all goes through it, and I use it to store my work, but I'm not linked to any other server software in any way.
If anyone may have any clues to help I'd be really grateful!
Many thanks!
Ben

Thanks for the response - this is why I'm asking though- I can't see anything on the iMac which would be causing this, and saving files to a folder on a server is a pretty basic fuction, and I can't risk the crashes. I don't see how the iMac connection would be causing this, or for the files to 'vanish' but if it is the iMac settings I'll need to find a fix. Every one else is okay, but I'm the only one using this software and filetypes. Surely the Windows software would have some kind of instructions for connecting Macs?
I was hoping someone may have experience and if any additional network settings might be needed. I will check with Apple support also to see if they have any info, but thought I may get a good response here.
What I meant by the "server guys" is that's it's an external company we pay to look after it - so I'd hoped they might have at least looked into it for me, but it's a brick wall "We don't support Macs" response... which is why I think it's unhelpful - even though they supplied the software knowing it needs to have multiplatform support...
It's really frustrating.
And I hope nobody does insist I use Windows... please... I'd have to leave....
EDIT - "We"?? - Do you work for them!?

If I do a repair the windows small business server 2011 standard repair console, will I loose the user's and computer's that are currently setup on the server ?

will I loose the user's and computer's that are currently setup on the server?

Hi,
Based on your description, I understand you want to repair SBS 2011 console (please refer to
the TechNet article:
Repair the Windows Small Business Server 2011 Standard Console). However, worry about losing users and groups that be created by Windows SBS Console. As far as I know, those will not lose.
Since, when you create users and groups via SBS console, those are added to Activity Directory.
The SBS console is a GUI component, which makes it easy to configure and manage your Windows SBS 2011 Standard network. When you repair the SBS console, this component will be affected.
In view of your concerns, please back up before operation. It will help us to avoid some unexpected
issue.
Hope this helps.
Best regards,
Justin Gu

Small Business Server 2011 Essentials failed lock bios on LSI MegaRaid 9260 8i on Gateway GT350 F1

I had SBS 2011 Essentials on my Gateway GT350 F1 server setup in LSI MegaRaid 9260 8i Raid 1. I bought 2 x 900gb sas drives to replace the 2 x 300gb i have. When i try to install SBS 2011 Essentials i get a error message saying
failed bios
lock this installation media may be used only on hardware
Windows 7 installs without any problems. I updated the firmware of LSI MegaRaid 9260 8i. I also see that the OS Support for the mb is only till windows sbs 2008 R2. What i don't understand is how they got SBS 2011 Essentials to work and why can't
I re-install it.
Thanks

Maybe try OS installation using the "Smart Setup DVD" that came with the server. If you need to download it, it may be avaliable at:
Support Gateway Products
(Select your server by product name, select your OS [Win2008R2], then look under Applications tab)
http://www.acer.ae/ac/en/AE/content/driver-gw
Merv Porter
==========================

Windows Small Business Server 2011 Standard Media

Hi there people,
We have a dell server with windows sbs 2011 standard licence and cals and we have a problem and we need to install windows but after days of looking i cant find were the dvd is, i look everywere on the internet and i dont found anywere to download the iso,
i need to install it to restore the backup can any one help me please?
thank you

I think you should start with a call to Dell support.
Jason Miller B.Comm (Hons), MCSA, MCITP, Microsoft MVP

Domain Trust Relationships in Windows Small Business Server 2011

I have seen that SBS 2011 (and older SBS versions, apparently) do not 'support' Domain Trust relationships.
Before coming across this information, I have already successfully created a trust relationship between a newly created SBS 2011 domain and an existing 2008 Domain, and everything seems to be working fine - users from one domain are recognized on the other,
etc.
So I was wondering - is the 'not supported' more of a 'you're on your own if it breaks', is this a violation of the license, or is it some sort of freak occurrence and I am extremely lucky to have gotten this to work. This is actually my first time
setting up a trust relationship and the entire process took about 10 minutes, so it seemed extremely easy for something that I now find out is unsupported.
If it is a license violation, I'll remove the trust relationship immediately. This is not a permanent configuration, just testing our software on the SBS2011 platform and domain trusts were the most expedient way of adding the SBS Domain users to the
list of authorized users on our primary domain's SQL Server.
Thanks in advance.

From here, it says that the trust relationship is not supported for SBS: http://technet.microsoft.com/en-us/library/cc672124%28v=ws.10%29.aspx
This means that this have not been tested by Microsoft and if you will have issues, you will not get supported from Microsoft.
I don't think that this is a violation of the license but it will be better to check with a Microsoft licensing expert in your country.
More if you ask them here: http://social.technet.microsoft.com/Forums/en-US/category/sbsserver
This
posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Microsoft
Student Partner 2010 / 2011
Microsoft
Certified Professional
Microsoft
Certified Systems Administrator: Security
Microsoft
Certified Systems Engineer: Security
Microsoft
Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
Microsoft
Certified Technology Specialist: Windows 7, Configuring
Microsoft
Certified Technology Specialist: Designing and Providing Volume Licensing Solutions to Large Organizations
Microsoft
Certified IT Professional: Enterprise Administrator
Microsoft Certified IT Professional: Server Administrator
Microsoft Certified Trainer

Migration of Windows Small Business Server 2011 Standard Edition to new hardware

Hi
I have a Windows SBS 2011 Standard Edition installation, of which, the windows component is very buggy. Everything on the server is working i.e. AD, Email. I am unable to shutdown the server gracefully, i am unable to open the system manager.
Backups also are not running, so i don't have a proper backup that i can use.
I want to migrate my Windows SBS installation to some standby equipment which i have, then reinstall the old server with Windows SBS 2011 and migrate back from the standby equipment to the original hardware.
I know this is possible, and i know that Windows SBS 2011 gives a 21 days grace period to complete the migration.
Is the path i have mentioned above seems to be viable for me to try and get back to my original hardware, with a fresh installation of Windows SBS, keeping AD and Microsoft Exchange intact.
Regards

Will not work as you have outlined it. The installation of a new server installs a new SID and you cannot add SBS to SBS domains. The only chance you have at this is to install a new non-SBS DC in the domain, export the mail assuming you are
using Exchange, move the shares to the new DC or some other system, pull out the SBS from the domain, move all the FSMO roles and have a stand alone Server Domain without SBS. Then, add SBS back to the domain in the documented manner.
I suggest you contact www.sbsmigration.com for a documented and supported method to accomplish this migration.
Larry Struckmeyer[MVP] If your question is answered please mark the response as the answer so that others can benefit.

Windows small business Server 2011 standard took long time to log (preparing to configure windows)

Hi,
I have Hp DL380G7 with 2011 SBS
it took very long time to log to the desktop when ever i restart the server.
now
i shutdown the server, then start it again since 2 hours , till now it show me
(preparing to configure windows) Do not turn off your computer.
what should be done and what should i consider so i do not face such problem later
thank you

Hi fatem,
Before going further, would you please let me confirm something more?
Can you remember which operation had been done, then this issue occurred firstly? Installed some updates or any other operation?
When this issue occurred, please check if you can ping and RDP to this SBS 2011 standard.
On current situation, it’s hard to say the root cause of this issue. I suggest that you can restart the SBS
2011 standard in Safe Mode with Networking and check if this issue still persists.
If more details you can find, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Small Business Server 2011 Remote Web Access RDP doesn't work.

I have setup Windows small business server 2011 and a separate Terminal Server on a Windows Server 2008 r2 box.
Remote Web Access webpage works fine, I can check email and view network drives online. The problem I have is that I cannot connect to any computer using the Connect button.
When I click connect button, a file is downloaded. e.g. QITS.Rdp is downloaded.
Once I run the QITS.rdp, it will ask me for credentials. I input it and will get the following error.
I do not know where to start to look for this problem. Anyone can shed some light?
Toby

Hi Toby,
Just an addition. Did you use an administrator account to logon the RWA and then connect to the remote computer?
Did encounter the same issue?
Meanwhile, please refer to following threads and check if can help you.
RD
Gateway - Unable to connect via IP (Netbios, FQDN work fine)
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Cannot install exchange server 2010 without small business server 2011

we purchased Windows Small Business server 2011 for one of our servers and installed the software and setup exchange server for the office. We had some 3rd party software that would not work with small business server so we had to install windows
2008 r2 server. we still need exchange server 2010. Is there anyway to install without small business server? When I entered the key in exchange server for the small business server it is saying that it is an invalid key. We have a
genuine version of windows small business server. is it all or nothing for the software. Thanks

SBS is indeed all or nothing. Breaking apart the individual components is not allowed. That includes exchange. If you want exchange without SBS, you'll need to buy exchange separately and exchange CALs. If you only have SBS CALs and aren't going to run
SBS, you'll need Windows CALs as well.

Windows Small Business Server 2011 Essentials - Restore Whole RD Website On IIS

Similar Messages

Maybe you are looking for