Windows socket initialization failed Error

Hello,
I have a truble with programming on MS visual c 6.0
Followings are error message on MS visual c 6.0
If i don't use DAQmxErrChk, error doesn't come out.
If i use DAQmxErrChk just one line(or more), error come out like the figure.
Please help me.
Yongtae

Restack your tcpip, and make sure you are not missing the winsock dll. Quite often, restarting the windows machine would also help.

Similar Messages

Satellite L300 - T2FTP Windows sockets initialization failed

After Login I get the following message:
T2FTP Windows sockets initialization failed
At the same time the system gives a message that it has found a new unknown hardware device and the driver should be installed.
Before I did NOT add any new hardware device.
Clicking the Start Button results only in a message: Windows Explorer does not react.
It is impossible to call any other routine.
Unfortunately I don't find my Recovery-CDROM.
Is there any chance to save my system?
Toshiba Satellite L300, Model PSLB8E
Windows VISTA-32 bit

Hi
I think its operating system issue something, somewhere was going wrong
I agree with Jeka. The Vista reinstallation would be the easiest and fastest way to get rid of this problem.
If didnt get the recovery disk because the OS was preinstalled and there was an tool which allows you to create an own recovery disk.
You should be able to recover the unit using HDD recovery
Restart the notebook, press F8 and choose repair my computer.
Then choose Toshiba HDD recovery.
This would recover the OS again.

While Installation of 11g database creation time error ORA-28056: Writing audit records to Windows Event Log failed Error

Hi Friends,
OS = Windows XP 3
Database = Oracle 11g R2 32 bit
Processor= intel p4 2.86 Ghz
Ram = 2 gb
Virtual memory = 4gb
I was able to install the oracle 11g successfully, but during installation at the time of database creation I got the following error many times and I ignored it many times... but at 55% finally My installation was hanged nothing was happening after it.....
ORA-28056: Writing audit records to Windows Event Log failed Error and at 55% my Installation got hung,,,, I end the installation and tried to create the database afterward by DBCA but same thing happened....
Please some one help me out, as i need to install on the same machine .....
Thanks and Regards

AAP wrote:
Thanks Now I am able to Create a database , but with one error,
When I created a database using DBCA, at the last stage I got this error,
Database Configuration Assistant : Warning
Enterprise Manager Configuration Failed due to the Following error Listener is not up or database service is not registered with it. Start the listener & Registered database service & run EM Configuration Assistant again....
But when I checked the listener was up.....
Now what was the problem, I am able to connect and work through sqlplus,
But I didnt got the link of EM and when try to create a new connection in sql developer it is giving error ( Status : failure - Test Failed the Network Adapter could not establish the connection )
Thanks & Regards
Creation of the dbcontrol requires a connection via the listener. When configuring the dbcontrol as part of database creation, it appears that the dbcontrol creation step runs before the dynamic registration of the databsase with the listener is complete. Now that the database itself is completed and enough time (really, just a minute or two) has passed to allow the instance to register, use dbca or emca to create the dbcontrol.
Are you able to get a sqlplus connection via the listener (sqlplus scott/tiger@orcl)? That needs to be the first order of business.

"Software Usage Metrics initialize failed" error when open Report Manager, after moving ReportServer from SSRS 2008 to SSRS 2012 (Native Mode)

I've asked this question in SQL Server Upgrade forume, I'm asking here as well:
Your help is highly appreciated!
After migrating ReportServer db from 2008 to 2012, when access Report Manager throughhttp://myserver:80/Reports, I got the error below:
ui!ReportManager_0-3!11d8!02/04/2013-15:19:12:: e ERROR: Software Usage Metrics initialize failed
The process is below:
•I successfully installed SQL Server 2012 (64-bit) Enterprise as a Native Mode on a server who runs Windows 7 Enterprise SP1 (64-bit).
•I restored "ReportServer2008To2012" and "ReportServer2008To2012TempDB" in SSRS 2012 from the db files backed up in SQL 2008. In SSRS 2008, I have SSRS Model, ad-hoc reports based on model, and I also have canned reports built through BIDS
report server project.
•I reconfigured both databases' Compatibility level to SQL Server 2012(110) from SQL Server 2008(100).
•I configured SSRS through Reporting Services Configuration Manager as below:
> I chosen "Use built-in account:" as Service Account
> In "Database" tab, I selected "Choose an existing report server database" and choose "ReportServer2008To2012" db, I used "Windows Authentication" (my login has the System Administrator priviledge). I got all 4 parts
success: Verifying database sku = Success; Generating rights scripts = Success; Applying connection rights = Success; Setting DSN = Success.
> I went to "Scale-out Deployment" to check if the initializing succeed, I found nothing there.
Here are what I did from different approaches:
A •I went to "Encryption Keys" and restored the key I backed up from SSRS 2008, after retoring, I got two initialized instances: One is on my current server (SSRS 2012), the other one is from the old server (SSRS 2008).
   I deleted the old one(SSRS 2008) through "Remove Server" action and kept the one on my current server(SSRS 2012).
   After I restart SSRS service, and tried to connect Report Manager, I got "An internal error occurred on the report server. See the error log for more details."
   I checked the log file, the error is actually "ERROR: Software Usage Metrics initialize failed"
B •I also tried to "Delete Encrypted Content" and did see the SSRS was initialized through checking it on "Scale-out Deployment", however when I tried to open Report Manager, I got the same error.
Anyone had the same issue? Any solution? Thanks in advance!

Your help is highly appreciated!
After migrating ReportServer db from 2008 to 2012, when access Report Manager through
http://myserver:80/Reports, I got the error below:
ui!ReportManager_0-3!11d8!02/04/2013-15:19:12:: e ERROR: Software Usage Metrics initialize failed
The process is below:
•I successfully installed SQL Server 2012 (64-bit) Enterprise as a Native Mode on a server who runs Windows 7 Enterprise SP1 (64-bit).
•I restored "ReportServer2008To2012" and "ReportServer2008To2012TempDB" in SSRS 2012 from the db files backed up in SQL 2008. In SSRS 2008, I have SSRS Model, ad-hoc reports based on model, and I also have canned reports built through BIDS
report server project.
•I reconfigured both databases' Compatibility level to SQL Server 2012(110) from SQL Server 2008(100).
•I configured SSRS through Reporting Services Configuration Manager as below:
> I chosen "Use built-in account:" as Service Account
> In "Database" tab, I selected "Choose an existing report server database" and choose "ReportServer2008To2012" db, I used "Windows Authentication" (my login has the System Administrator priviledge). I got all
4 parts success: Verifying database sku = Success; Generating rights scripts = Success; Applying connection rights = Success; Setting DSN = Success.
> I went to "Scale-out Deployment" to check if the initializing succeed, I found nothing there.
Here are what I did from different approaches:
A •I went to "Encryption Keys" and restored the key I backed up from SSRS 2008, after retoring, I got two initialized instances: One is on my current server (SSRS 2012), the other one is from the old server (SSRS 2008).
   I deleted the old one(SSRS 2008) through "Remove Server" action and kept the one on my current server(SSRS 2012).
   After I restart SSRS service, and tried to connect Report Manager, I got "An internal error occurred on the report server. See the error log for more details."
   I checked the log file, the error is actually "ERROR: Software Usage Metrics initialize failed"
B •I also tried to "Delete Encrypted Content" and did see the SSRS was initialized through checking it on "Scale-out Deployment", however when I tried to open Report Manager, I got the same error.
Anyone had the same issue? Any solution? Thanks in advance!

NLS initialization failed error

Hi,
I am running on XP and have already installed APEX 3.0.1 on the XE db. I have since installed the Oracle HTTP Server from the 10gR2 companion CD and at the point of the Configuration Assistant secion of the installation as it tries to start the HTTP Server the NLS initialization error appears.
I have listed the output from the cfgtoollogs directory below :
INFO: oracle.apache.standalone:About to execute plug-in Starting HTTP Server
INFO: oracle.apache.standalone:The plug-in Starting HTTP Server is running
INFO: oracle.apache.standalone:CmdExec: D:\oracle\product\10.2.0\ohs/opmn/bin/opmnctlw.exe
arg: startall
INFO: oracle.apache.standalone:ExitCode=2
Stdout=opmnctl: starting opmn and all managed processes...
Stderr=main: NLS initialization failed!!
main: NLS initialization failed!!
pingwait exits with 1228520
I have noticed this error in Metalink and within the forum but the solutions mentioned don't seem to solve this problem.
Any help would be appreciated.
Kind Regards,
Tom

Hi,
This matter has now been resolved as follows :
Hi Alistair,
Very many thanks for your post as the error was beginning to drive me up the wall.
I have since removed the oraociei10.dll file from the older HOME directory (previous Client installation) that existed on my system and the matter has been resolved i.e. I can now start the HTTP server.
Thanks again for taking the time to supply the information.
Kind Regards,
Tom

Asset Selector initialization failed error when trying to create new site

Hi,
I'm trying to create a new site in using the Site Administration functionality in ATG 10, and I get the UI error 'Asset Selector initialization failed, after selecting to Create a new site. In the log, I have the following error:
2012-05-29 16:12:10,400 ERROR [nucleusNamespace.atg.remote.assetmanager.browse.service.BrowseService] (http-0.0.0.0-8180-2)
CAUGHT AT:
CONTAINER:atg.remote.assetmanager.browse.service.BrowseException; SOURCE:atg.repository.RepositoryException: No property named "null" could be found in the item descriptor "siteTemplate".
     at atg.remote.assetmanager.browse.service.RQLRetriever.retrieveItems(RQLRetriever.java:125)
     at atg.remote.assetmanager.browse.service.BrowseManager.getListMembers(BrowseManager.java:608)
     at atg.remote.assetmanager.browse.service.BrowseManager.getChildrenPage(BrowseManager.java:381)
     at atg.remote.assetmanager.browse.service.BrowseService.getChildren(BrowseService.java:583)
     at atg.remote.assetmanager.browse.service.BrowseService.getBrowseNavStateForContext(BrowseService.java:509)
     at atg.remote.assetmanager.browse.service.BrowseService.initialize(BrowseService.java:179)
     at atg.remote.assetmanager.browse.service.BrowseManager.getAssetNavigatorState(BrowseManager.java:1247)
     at atg.remote.assetmanager.browse.service.BrowseManager.getAssetNavigatorState(BrowseManager.java:81)
     at atg.remote.assetmanager.selector.service.AssetSelectorService.getAssetNavigatorState(AssetSelectorService.java:170)
     at atg.remote.assetmanager.selector.service.AssetSelectorService.loadAssetNavigatorStates(AssetSelectorService.java:222)
     at atg.remote.assetmanager.selector.service.AssetSelectorService.initializeAssetSelector(AssetSelectorService.java:355)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at flex.messaging.services.remoting.adapters.JavaAdapter.invoke(JavaAdapter.java:421)
     at atg.flex.messaging.services.TransactionalJavaAdapter.invoke(TransactionalJavaAdapter.java:140)
     at flex.messaging.services.RemotingService.serviceMessage(RemotingService.java:183)
     at flex.messaging.MessageBroker.routeMessageToService(MessageBroker.java:1503)
     at flex.messaging.endpoints.AbstractEndpoint.serviceMessage(AbstractEndpoint.java:884)
     at flex.messaging.endpoints.amf.MessageBrokerFilter.invoke(MessageBrokerFilter.java:121)
     at flex.messaging.endpoints.amf.LegacyFilter.invoke(LegacyFilter.java:158)
     at flex.messaging.endpoints.amf.SessionFilter.invoke(SessionFilter.java:44)
     at flex.messaging.endpoints.amf.BatchProcessFilter.invoke(BatchProcessFilter.java:67)
     at flex.messaging.endpoints.amf.SerializationFilter.invoke(SerializationFilter.java:146)
     at flex.messaging.endpoints.BaseHTTPEndpoint.service(BaseHTTPEndpoint.java:278)
     at flex.messaging.MessageBrokerServlet.service(MessageBrokerServlet.java:322)
Caused by: atg.repository.RepositoryException: No property named "null" could be found in the item descriptor "siteTemplate".
     at atg.adapter.gsa.GSAItemDescriptor.executeSingleQuery(GSAItemDescriptor.java:8975)
     at atg.adapter.gsa.GSAItemDescriptor.executeQuery(GSAItemDescriptor.java:8846)
     at atg.adapter.gsa.GSAItemDescriptor.executeQuery(GSAItemDescriptor.java:7765)
     at atg.adapter.gsa.GSAView.executeUncachedQuery(GSAView.java:338)
     at atg.repository.query.QueryCache.executeUncachedQuery(QueryCache.java:693)
     at atg.repository.query.QueryCache.populateEntry(QueryCache.java:912)
     at atg.repository.query.QueryCache.executeCachedQuery(QueryCache.java:433)
     at atg.repository.RepositoryViewImpl.executeQuery(RepositoryViewImpl.java:344)
     at atg.adapter.gsa.GSAView.executeQuery(GSAView.java:285)
     at atg.remote.assetmanager.browse.service.RQLRetriever.retrieveItems(RQLRetriever.java:118)
     ... 112 more
SOURCE EXCEPTION:
atg.repository.RepositoryException: No property named "null" could be found in the item descriptor "siteTemplate".
     at atg.adapter.gsa.GSAItemDescriptor.executeSingleQuery(GSAItemDescriptor.java:8975)
     at atg.adapter.gsa.GSAItemDescriptor.executeQuery(GSAItemDescriptor.java:8846)
     at atg.adapter.gsa.GSAItemDescriptor.executeQuery(GSAItemDescriptor.java:7765)
     at atg.adapter.gsa.GSAView.executeUncachedQuery(GSAView.java:338)
     at atg.repository.query.QueryCache.executeUncachedQuery(QueryCache.java:693)
     at atg.repository.query.QueryCache.populateEntry(QueryCache.java:912)
     at atg.repository.query.QueryCache.executeCachedQuery(QueryCache.java:433)
     at atg.repository.RepositoryViewImpl.executeQuery(RepositoryViewImpl.java:344)
     at atg.adapter.gsa.GSAView.executeQuery(GSAView.java:285)
     at atg.remote.assetmanager.browse.service.RQLRetriever.retrieveItems(RQLRetriever.java:118)
Has anyone encountered this issue before?

Are you running both SiteAdmin and SiteAdmin.Versioned on your publishing server?
Also have you done any customization in SiteRepository?
Try getting merged XML for /atg/multisite/SiteRepository through Dyn Admin Component browser and make sure it comes up nicely for both production and publishing servers

Windows 8 Recovery failed; Error code: 0xc000000f

Hi,
I am having some trouble with my HP Envy m6 laptop.
I was using Windows 8 pro for almost a year without having any problem. After installing Win8.1 Pro, I had trouble booting and called in HP support and conducted a System Recovery. Everything was good but system was slower.
So, I backed up all data and then proceeded to do a Factory Reset (with HP Recovery Manager) with my HP Recovery DVDs which I have burned earlier. Everything seems to be working fine however the restoration failed (Incomplete restoration)! Tried couple of times but same problem.
While conducting some self-tests, 'Memory Test' (under Run-In Test) failed with "FAILURE ID: RGCD5F-6G56SV-XV7X0K-406803".
At the end, got following error:
"Recovery
Your PC needs to be repaired
A required device isn't connected or can't be accessed.
Error code: 0xc000000f
You'll need to use the recovery tools on your installation media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacture."
I tried to reach HP Support since still have warrenty but unfortunately I just wasted my time talking to them. I purchased my laptop from Canada but currently living in Australia which made it really difficult to communicate with them.
Can anyone please give me some idea what I needed to do to resolve this issue? I went through several articles in here but failed to get the correct ones. Most of them are for Windows 7 and there are many differences in Windows 8!
I am urgently requesting some assistance from a HP expert who has experience dealing similar issues.
Thank you.
Best Regards,
Suranjit

The failure ID that you have provided for the memory test means that the Checksum has failed. This means that it is not finding a part that should be available, but is not showing. After taking a look into the issue of the memory test failing, the most likely cause of the failure is one memory modules has failed. I have included a link to another HP Forum thread here. Please follow the steps that DavidPK has outlined.
For the recovery error message that you are getting, this means that an integral component used during startup can not be found. This error should resolve itself once the memory Checksum error is resolved.
If your notebook has two memory modules, you should be able to boot from the one memory module until the other one is replaced.
Please let me know the outcome of the troubleshooting, thank you.
I worked on behalf of HP

Upgrade to Windows 8.1 fails - error 0X1900101

Dear Community,
according to these guidelines https://www.toshiba.de/innovation/generic/windows8_1-upgrade-stepbystep/
I tried several times to update windows. However, it always failed.
The system is totally on default setting without any addtional installations.
Are there any other solutions?
Kind regards
Chris

Did you already check the similar thread in this [Windows 8.1 forum|http://forums.computers.toshiba-europe.com/forums/forum.jspa?forumID=139]
There are some threads about Windows 8.1 update problems with an error 0X1900101 0x30018 where the issue could be already solved.
For example:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=74631

Re-install on Windows 8.1 fails (error 1624)

In March 2012 I installed PSE v10 on my laptop (Windows XP Pro SP3); through download. Because XP will soon not be supported with safety updates any longer, I installed Windows 8.1 (clean installation after backup of the data files) on the same laptop.
After restoring the install directory from this backup it turns out that the SETUP.EXE returns -- soon after having provided the serial number - an error starting with:
"Server returned unexpected error 1624 attempting to ..."
Please help.
Regards - Jan

Hi Jeff,
Thanks for the tip, but ... unfortunately no succes with that utility: no problems found.
After that I searched the register for "elements 10" --> no entries found! Please remember that I did a clean install of win8.1 and then I restored the complete directory with the installation files of PSE 10 --> double clicked SETUP>EXE --> the error message(s).
What do you think? Maybe there is a link somewhere to PSE 10 on the Adobe site and start from scatch?
{ In the mean time (yesterday) I installed PSE 12_30day_trial_version, because I needed a PSE feature urgently. }
Regards, Jan

Satellite A500 PSAM3E - Windows 7 upgrade fails - Error code: 0x80070570

I am installing the win7 upgrade on my Satellite A500 PSAM3E and when I reach in the Expanding windows files it stop and a message pop up:
*(Windows cannot install required files. The file may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070570). *
Installation stop and I could not do anything, I restarted the upgrade but still the same.
I have just received my DVD win7 upgrade from Toshiba, is the DVD corrupted or some other issues, before the installation a message appears that I should uninstall ATI Catalyst install and ATI catalyst control panel.
Needs help from expert who have already done the upgrade.

Hi
> before the installation a message appears that I should uninstall ATI Catalyst install and ATI catalyst control panel.
And why you didnt do this?
Maybe you are running an older version of the display drivers and so you have to uninstall them before you can start the upgrade.
Check this!!
After the successful upgrade you can install the newest display driver version from the Toshiba page.
By the way: Here you can find a step by step upgrade:
http://aps2.toshiba-tro.de/kb0/TSB9902P60000R01.htm

Lenovo 3000 N100 Network issue / Wireless Stack initialization failed, error code 117

Hi,
Lenovo 3000 N1000 with 1GB Ram, Win XP SP2, purchased in May 2006. WLAN network with WPA-PSK key worked without any issues so far and is still accessible with PC.
After transferring music via from my notebook to my mobile Bluetooth all network adapters seem to be disconnected. Neither Access Connections (AC) nor Windows can find any wireless network. Also if I try to configure any LAN, WLAN with Windows I get the message that all network adapters have been removed. However I cannot spot any issue in the device manager as all parts are shown to be working OK.
This is what I've done so far:
1) Checked Radio switch ---> on
2) FN +F5 --> connection on
3) Uninstalled AC, downloaded and installed most actual version (5.00 Build 7VCX32WW)
4) Installed new version for wireless driver for Intel(R) PRO/Wireless 3945ABG (version 12.0.0.82)
Still, even if I uninstall AC to check if WLAN is working at all, Windows gives the error message that all network components have been removed.
Diagnose Tool gives the following output:
"Wireless Stack initialization failed, error code 117"
Logfile:
Description : Intel(R) PRO/Wireless 3945ABG Network Connection
Type : Wireless LAN Adapter
DriverVersion : 10. 5. 1. 59 ----> why is the old driver version??????????
PNPID : PCI\VEN_8086&DEV_4227&SUBSYS_10118086
SupplicantVersion : AEGIS Protocol (IEEE 802.1x) v3.5.3.0
ERROR AcSvc( SYSTEM(Prvlg).1108.4580) [9/3]11:04:15:703 CAcGolan::GetRadioStateInDriver: Golan API GetRadioState() missing!
Hope this is enough information for anyone of you in order to suggest any solution. As I could see from previous threads some of you experienced similar problems in the past and could fix them somehow. However I couldn't find anyone with exactly the same problem.
Thanks much in advance for any advice you might have.
Flo

Hi
I have this problem also with my Lenovo 3000 V200.
Sometimes when I boot up the PC it will connect to the network and everything works just fine.
At other times, after boot, the "wireless stack initialization failed, error code: 118" problem occurs
and the only way to solve it seems to be a PC restart. Nothing else I do will bring the network up.
If I study the Networking tab in Task Manager it indicates that no adapters are available (wired eth.
access also fails). At a few occations connectivity have failed alltogether (i.e. a reboot have not solved
the problem). Last time this occured I had to reinstall the complete system (from a previous backup)
to get networking up.
I have tried different versions of Access Connections (5.02, 5.12, 5.21) and the same problem occurs
at seemingly random instances in time. This is obviosly a problem with the Access Connections software
since the Wireless networking works fine when I let windows manage it...
Anyone with a fix?
/Fredrik

Writer initialization failed in premiere 3

I'm unable to create WMV files as I continue to see "writer initialization failed" error message. I can export and save AVI files but not WMV. What can I do?

If you can output AVIs, you can import them into Window MovieMaker and output WMVs from there.
Otherwise, you may need to uninstall and reinstall the software. Unless it's a recent Windows update. They occasionally knot things up too.

IPOD NANO-Windows delayed write failed...

I just bought an IPOD NANO 4gb yesterday... Downloaded ITunes and have been having problems getting it to SYNC music to my IPOD. It keeps throwing the "windows delayed write failed" error. No other errors present. I havent been able to get any music onto my ipod at all. It freezes up and throws the error at me..then it throws it like every 5 seconds from there on.
Ive searched and searched and idk what to do anymore! I need music!
Ive Formatted the IPOD via windows, Restored it Via Itunes.. what else can i do?
Help me
MY comp info:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Gateway C3070
iTunes 7.6.0.29
QuickTime 7.4.1
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
Apple Mobile Device 1.1.3.26
Bonjour 1.0.4.12 (118.4)
iTunes Serial Number 3614F92E2F1F76AF
Current user is an administrator.
The current local date and time is 2008-02-08 15:46:27.
iTunes is not running in safe mode.
Video Display Information
NVIDIA GeForce4 MX Integrated GPU
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {A601905F-B0F3-4B9A-AC15-F45D108BC0BC}
Description: Linksys NC100 Fast Ethernet Adapter - Packet Scheduler Miniport
IP Address: 67.169.80.83
Subnet Mask: 255.255.254.0
Default Gateway: 67.169.80.1
DHCP Enabled: Yes
DHCP Server: 68.87.76.13
Lease Obtained: Fri Feb 08 15:39:24 2008
Lease Expires: Mon Feb 11 10:13:47 2008
DNS Servers: 68.87.76.178
68.87.76.178
68.87.78.130
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2008-02-08 14:01:53.
** iPod/iPhone Connectivity Tests **
iPodService 7.6.0.29 is currently running.
iTunesHelper 7.6.0.29 is currently running.
Apple Mobile Device service 1.14.0.0 is currently running.
Universal Serial Bus Controllers:
Standard OpenHCD USB Host Controller. Device is working properly.
Standard Enhanced PCI to USB Host Controller. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
JEN'S IPOD (N:\), iPod nano (Second Generation) running firmware version 1.1.3
Serial Number: YM7350ANV8W
Bus Speed: 61440
Message was edited by: Jennifer805
Message was edited by: Jennifer805
Message was edited by: Jennifer805

TrevorQ's idea works great! Thanks! I had already gone and gotten my second nano 4GB and the same thing happened both times after using the updater - called support on first and they had no answer. Thanks a bunch - was starting to lose hope after it happened again on the second one. Must be a problem with the updater 4-23-06 and the newest ITunes upgrade.
If you have trouble with the right click - after the ipod is highlighted then click on the file menu and play the waiting game again - format should appear in the menu after an extended wait. Good luck all!
ASUS P4 2.8 Windows XP Pro
ASUS P4 2.8 Windows XP Pro

IPod won't sync, gives 'Delayed Write Failed' error.

I've had my iPod classic 80gb, for roughly a year now, and I never really had any permanent issues with it, until last week. I plugged it into my laptop and left it on over night. I wake up in the morning and all my songs and videos were gone. iTunes was reading the data as 'Other'. Overnight, without me doing a single thing, everything was gone. I unplugged it and plugged it back in, and all the files were gone. Completely. Space had been returned.
I painstakingly put my songs back in that afternoon. The next day, I plugged the ipod into my office computer, and tried to sync my podcasts. After syncing about 20 files, iTunes froze. Then a yellow bubble popped up saying 'Delayed Write Failed' after which it wipes out everything I was able to sync.
I've done everything, from restoring the ipod, to re-installing iTunes to formatting the disk to straight up performing a chkdsk. As i speak right now, my laptop won't boot up after i performed the last chkdsk, which told me i had a bunch of invalid sectors or some other. For one week, I've searched the net and it seems no-one has a solution to this.
Any help? I don't have an Apple store in my country, and I don't want to believe that i have to get a replacement.

1st - Sorry I can't help you.
I also have iPod Classic 80gb and have had no trouble till two days ago (11/08). I connected my iPod and it showed up as a source in iTunes but none of my music was shown. I reconnected it and same thing, I checked for update for iPod but it said it was up to date. I then used iTunes to restore my iPod to factory settings. It went through the process and restarted but after that would never show up as a source in the iTunes window.
When I connect the iPod to my PC it detects the USB Device as an iPod right way (so it doesn't seem to be a USB Driver issue) but then the "Auto-Play" window shows up and it makes my PC slow way down and then eventually I see the "Windows Delayed Write Failed" error mesage in the task bar. If I check My Computer it shows the iPod as a drive.
I've done everything listed in Apples Support Page for this, from restoring the iPod, to re-installing iTunes, clearing temp folder and old registry files, updating iPod Service in MsConfig. I have also tried to sync the iPod with my other PC and see the same error so it seems the iPod is corrupted. I don't know anyway to restore factory settings again since it won't show up in iTunes anymore. I've searched the net and it seems no-one has a solution to this.

Exchange Management Console, Initialization Failed

Hi,
Today when i open the Exchange 2010sp1 EMC it gave me this error
The following error occurred while attempting to connect to the specified Exchange Server HUBC01.contoso.int
The attempt to connect to
http://HUBC01.contoso.int/powershell using "kerberos" authentication failed: connection to remote server failed with following error message: The WinRM client cannot process the request because the server name cannot be resolved. for more information see
the about_remote-troubleshooting help topic
Your quick response really appriciated,
Dilshan

Hi Dilshan,
Any updates?
Please check whether "WinRM IIS Extension" is installed in the Server Manager->Feature. If not, please install it.
Please also try to use another member of Organization Management to log on to Exchange to open EMC to test.
Frank Wang
I came across this thread when troubleshootinga a similiar problem. I login to Exchange this morning and I'm unable to open EMC and get an Initialization Failed error message. It states
The attempt to connect to http://exchange2010server/PowerShell using "Kerberos" authentication failed: Connecting to remote server failed with the following error message: Access is denied.
I'm curious if the proposed solution to this thread would solve my problem. I'm a little stumped as to what could cause this, other than the fact a colleague of mine installed the Exchange management tools on his Win7 workstation. That really
is the only change that has taken place in the last week.
Any thoughts?

Windows socket initialization failed Error

Similar Messages

Maybe you are looking for