Windows stuck after return of s2r

hi,
i'm using an external monitor with my macbook pro shut. when sending the macbook to suspend to ram, plugging it off and opening it again some time later, my windows got stuck. i can move them but they'll react about 5 seconds later to the movement and can't be used till then.
any suggestion to this one of the 300 new bugs of leopard?

You must have damaged something if OS X will not appear as a bootable system in the boot manager when you used OPTION boot unless I misunderstood you. That means you no longer have an OS X bootable system. You can try just reinstalling OS X if the partition is OK:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Similar Messages

System time stuck after returning from deep sleep

Hi,
When I return from deep sleep, my system time is set to when I entered deep sleep. Only after opening Date & Time system preferences, the time is corrected.
Any help is highly appreciated.
Markus

Other basic and routine maintenance is often helpful
even if the results of preventative tasks go unseen.
The use of Disk Utility's function to 'repair disk permission'
and also the ability to start the computer into SafeBoot
mode, where it is forced to check and repair system bits,
(hold shift key on startup, wait, login; at desktop, you can
also choose to run Disk Utility per above, by using GO in
the Finder menubar, and open Utilities folder> disk utility;
when done repairing disk permissions, quit; then restart)
is one of the harmless simpler single or dual acts one can do.
There are third party utility like interface tools that allow
the user to run maintenance tasks through the GUI of
that tool and not have to force them from a Single User
mode of access; these are often freeware, such as the
well known OnyX by Titanium Software. In my Macs,
once a month or more (if I feel motivated) I run OnyX's
'automation' tab selection, and check-box all of them.
And have OnyX's preferences set to restart after its done.
Some of the other options can be helpful, when you discover
their purpose and find when they can have practical worth.
In any event, some kinds of issues can be headed off; and
a good idea is to invest in some backup strategy which
gives you a few options; although I am lazy about it now, I
have made backup full bootable clones of my computers.
This is done to an external drive which supports same.
Learning ahead of a drastic need, how to use some of
the better free-running downloadable cloneware, is good.
And the idea is you can actually do most of the minor tech
work and repairs to a system (and have boot clones) at
home; especially handy when you live 100+ miles on a
road to nowhere. As some will argue, the living planet is
on a dead-end road, it is good to get out and witness life.
Being where there are no tech support persons, I have
learned to do more than I need to; and when not messed
with, tend to enjoy learning more than I'd actually need to.
In any event, hopefully things go well with these matters...
Good luck & happy computing!

Cannot reinstate catalog after returning PC (Windows 7) to factory settings (because of worm infection). Catalog was backed up on external drive but not using PSE backup facility. Cannot find and *.tly file. Is this hopeless?

Cannot reinstate catalog after returning PC (Windows 7) to factory settings (because of worm infection). Catalog was backed up on external drive but not using PSE backup facility. Cannot find and *.tly file. Is this hopeless?

If you made backups of all of your photos and your catalog file using some third-party method (i.e. not using the PSE catalog backup command), then you should be able to restore everything.
Step 1. Put the photos in the EXACT SAME LOCATION as before. For example, if they were in subfolders of C:\Users\<username>\Documents, then they must go into the exact same subfolders of C:\Users\<username>\Documents.
Step 2. Move the catalog file to wherever you want it to be, and then double-click on it.

In options, checking a new tab instead of the default a new window. After shutdown & restart FireFox returns to the w/no check mark. Can I save the check mark?

After a computer restart, Firefox always defaults in Options, Tabs, 'Open new windows on a new Tab' unchecked. After checking the box Firefox will then open new windows in a tab instead of a new window, However after a shutdown of the computer the check mark is gone and must be rechecked. Is there a way for Firefox to remember the check mark when the program is restarted?

hello gearjam, first of all it appears, that you're using an outdated version of firefox with various known security vulnerabilities - please [[Update Firefox to the latest version]] as soon as possible to stay safe while you browse the web.
regarding the problem you're observing, please make sure that no extension in firefox > addons > extension with the functionality to change tab settings is interfering here - or if this is not the case, go through the steps described in [[How to fix preferences that won't save]].

After I have opened a page in a new window Firefox after a few secs return to the previous page.

I click on a link in one page to open another page in a new window. This happens and I am brought to the new window, but after 1-3 secs I am brought back to the original window.
To go to the new window I have to move the cursor to the list at the bottom of the screen and click on the entry for the new window.
This behavior started a few weeks ago (say early September).
The problem is consistent.

Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Unable to Load Windows 7 after a power failure

My windows 7 workstation was in a sleep mode when a power failure happened. after trying to power up the machine it tries to resume windows session but stucks after displaying an error unable to find saved session. it gives an option to either delete saved
session and boot or locate the session, but none of the periferal devices are responding, so I am unable to select either option.
I have a standard 102 logitech keyboard connected to that workstation. it works wen I select to enter a bios on the start up, but does not respond to any other prompts.
Any advice?

In addition, try to boot into safe mode and check the results.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

[SOLVED] Installing Windows XP after Arch Linux

I'm not sure at all where to post this, so I've decided to do it here since I have the problem on a laptop... Please move if it should be somewhere else.
I installed Arch Linux on my new laptop a month ago or so, and am very pleased to have found the very kind of distro I've been looking for. However, I'm having trouble with my graphics (either wine doesn't support it, or the drivers don't have 2D/3D acceleration), and now I want to install Windows XP next to Arch Linux.
Using a GParted LiveCD, I've repartitioned the harddrive as such: Unpartitioned Space (27GB), Linux (197GB), SWAP (5GB).
I've also removed the bootable flag from the Linux partition, just to be sure. However, when I try to install Windows XP, it gets stuck after unpacking a bunch of drivers, giving me a bluescreen that tells me to make sure the hardware isn't broken, check my harddrive with CHKDSK /F, or look for viruses. Ofcourse I know none of these are true, since I'm running Arch Linux just fine.
A friend suggested that maybe my hardware isn't supported by Windows XP, which sounds like the most reasonable explanation so far, but I can't find a list of supported hardware. The M$ homepage basicly says
"Pentium 233-megahertz (MHz) processor or faster (300 MHz is recommended)"
for CPU, which doesn't help me at all.
My hardware is:
Processor: Intel Celeron 2.2 Ghz
Memory: 2GB DDR2
Graphics: Intel 4500MHD
And the laptop is called an "eMachines E525", though that doesn't say much since there are very, very many called this.
Can anyone give me any hints as to what I might be doing wrong?
Last edited by Noxic (2010-05-29 18:44:32)

Sounds like something I'll want to do. Where did you download the drivers? Do I have to follow some guide? Thanks for the tip
EDIT:
Indeed I will want to install AHCI drivers, otherwise Arch Linux fails to boot quite badly. There is also a problem preventing me from booting when I'm using AHCI though;
At boot, Arch Linux checks /dev/sda1 (NTFS) for errors, and expects to check an ext2 filesystem. Obviously, however, /dev/sda1 is an NTFS filesystem.
Since it tries to read the NTFS partition as an ext2 filesystem, it panics. Arch Linux then prompts me for the root password (or Ctrl+D to reboot), but I've disabled root login and can therefore do nothing at this point.
I have a GParted livecd and the Arch Linux livecd, so editing files on any of the filesystem isn't a problem at all, but I don't know what to do at this point. Help?
Last edited by Noxic (2010-05-29 12:40:33)

Can't boot to windows, stuck at black screen (with cursor)

Hi! I'll get straight to my problem: I can't boot to Windows (Windows 10 Technical Preview) anymore after installing VirtualBox (or rather, an Android emulator that installed VirtualBox) on my system. I get stuck, after the loading animation with the blue HP logo, on a black screen (I can move my cursor around) but the login screen never shows up.
The problem.
I'm currently dual-booting linux and windows for several purposes. My laptop came with a Windows 8.1 OS by default. Some time after the Windows 10 Tech Preview came out to public, I upgraded my system to Windows 10 (so my 8.1 is gone now). Everything's going well until I installed this Android emulator (which installed VirtualBox) on Windows 10. Everything seemed fine at first but after rebooting, Windows isn't working anymore. I can still boot to linux, but Windows just won't boot properly.
What I've tried.
I've tried A LOT of things. The problem actually happened twice already (at first I was able to fix it with System Restore but not this time around). I have a Windows 8 USB Recovery Drive at hand, just so I can access a Windows command line. It's not from my system, though. It came with a new windows 8 laptop of a friend so I just borrowed it.
1: System Restore. This worked the first time. But now the restore won't finish and throws an error, telling me that it can't restore my system.
2: Refresh PC. "There was a problem refreshing your PC. No changes were made." or something like that.
3: chkdsk on C:\. It says it changed some files, but it doesn't really fix the problem.
4: sfc /scannow. Again, something happened, but it didn't get fixed.
5: bootrec.exe to fix BCD and MBR. Doesn't work. (as far as I know my sytem is using GPT)
6: Hard reset (remove all power sources then hold power button). Still not working.
7: System Restore again. All the restore points aren't working. It reaches a "Finished" state, but then an error comes up after. It says can't extract a specific file, and the restore point is damaged or might have been deleted during restore.
8: checking and fixing bad sectors (nope, no bad sectors on my hard drive)
9: built-in component tests. It passed all of them, except the battery test (my battery really isn't surviving for any duration longer than 30 minutes, but that shouldn't affect my OS). I didn't try the really long tests since I thought it wouldn't matter as my problem is most probably completely software (since linux is still working).
10: cry. oh please. Windows isn't working. What should I do? (
Things I haven't tried.
1: RAM and CMOS battery reset.
2: Reset PC.
3: Format hard drive.
4: Test hard drive on another laptop's system.
If possible I'd like to avoid getting my hard drive wiped, since I have a lot of stuff to backup (more than 300 GB of files + dozens of linux apps and ppas), and I only have a 32GB USB drive to backup all the files I need).
Thanks for reading.

Sorry for the delay. Wasn't expecting the "road work" signs when attempting to check back with you in the AM here.
As others have already mentioned, the prompt for file systems occurs during text mode setup. Quick or Full? FAT or NTFS? How do you know what to do?
We'll start with file systems, short and sweet. Most any OS can read and write FAT volumes without fail which makes FAT ultra-portable, and the only choice if you want to let Mac OS write documents on your Windows volume. It's also more efficient on drives of 16 GB or less. However, FAT has no folder-level access control, so any file in the system can be manipulated by any user or by any system process. By contrast, NTFS is far more restrictive. It can only be manipulated under Windows, though other systems may be able to read it. Not only do you get the access control that FAT lacks, but you also get superior efficiency on large volumes, plus the power to compress or encrypt folders and files at will (in "business" flavors of Windows only--and yes, Vista Ultimate counts as "business" even though it will be supported much like a "consumer" version).
On format speeds: A quick format is very handy if you have a large partition or a single drive completely dedicated to Windows. Because it completes in 30 seconds or less, it will go a long way toward completing your Windows install. However, in some cases, volumes formatted with a quick format may have reliability issues. They must have fixed this in Vista, because Vista can only format at the "quick" speed.
A full format tests all blocks of a given volume (as opposed to testing an entire disk unless the volume itself is the entire disk) as the file system structure is laid down. Bad blocks are marked as "used" when they are found. This type of format takes much longer as a result of all the testing, but the result is a more stable volume from the start.
Get past the formatting stage, and you'll be right as rain.
Nate

Process got stuck after receiving SIGUSR1

Hi,
I have a C++ program which get stuck after receiving SIGUSR1 signal. Its a daemon process which stop after receiving SIGUSR1 signal. but instead of stopping it stuck.
below is the pstack of the process when it was stuck.
----------------- lwp# 1 / thread# 1 --------------------
7fa1f48c lwp_sema_wait (7e340)
7fa996dc _park (7e340, 7fabc000, 0, 7e278, 2316c, 0) + 114
7fa993a4 _swtch (7e278, 7e278, 7fabc000, 5, 1000, 7fabc000) + 424
7fa9ada0 mutexadaptive_lock (7fac785c, 4c00, 1000, fffeffff, 1, 4d58) + 160
7fa9aab4 cmutexlock (7e188, 7fabc000, 0, 33d8c, 0, 0) + 84
00033d8c __1cDstdNbasic_ostream4Ccn0ALchar_traits4Cc___Gsentry2t5B6Mr1_v_ (ffbe9254, 7ce30, 7d278, 7c24c, 8, 7e180) + 50
00031768 __1cDstd2l6Frn0ANbasic_ostream4Ccn0ALchar_traits4Cc____pkc_2_ (7ce30, 66f4d, 7c24c, 0, 0, 0) + 20
00023844 __1cSReplicatorDriver64Jterminate6Fi_v_ (10, 0, 0, 0, 0, 0) + 1c
00023674 __1cSReplicatorDriver64ScatchSignalHandler6Fi_v_ (10, ffbe97f0, ffbe9538, 0, 0, 0) + 1c
7faab118 __sighndlr (10, ffbe97f0, ffbe9538, 23658, 7e320, 7e310) + c
7faa811c sigacthandler (10, 7e278, 0, 0, 0, 7fabc000) + 708
--- called from signal handler with signal 16 (SIGUSR1) ---
7fa1fa6c _write (7e180, 7e940, ffffffff, 280, 2, 7e000) + c
0005a6a0 __1cDstdNbasic_filebuf4Ccn0ALchar_traits4Cc___Esync6M_i_ (7e180, 8, 7d278, 8, 218, 7ce30) + 30
00031d30 __1cDstd2l6Frn0ANbasic_ostream4Ccn0ALchar_traits4Cc____pkc_2_ (7ce30, 300, 7c24c, 2fd10, 0, 1) + 5e8
0002a548 __1cXTimesTenTableReplicatorEread6MrknXTimesTenLogConnection64_ripppnRttXlaUpdateDesc_t__b_ (803f0, 80430, ffbeaa30
, ffbeaa2c, 2fd10, 8) + 68
00029f98 __1cXTimesTenTableReplicatorJreplicate6Mrl_b_ (803f0, ffbeaaf0, 3e8, 5, 7fb4b4e8, 34) + 108
00028408 __1cYReplicatorThreadDriver64Drun6M_b_ (0, 3fc7c, 8, 7d278, 7ce38, 7e180) + c8
000232c4 __1cSReplicatorDriver64Drun6M_b_ (ffbeabd8, 23258, 7c24c, 2fd10, 0, 1) + 14
00023174 main (3, ffbeac44, ffbeac54, 7c800, 0, 0) + 124
00023028 _start (0, 0, 0, 0, 0, 0) + 108
below is the code of signal handler.
void ReplicatorDriver64::catchSignalHandler(int i_signalNumber)
 if (i_signalNumber == SIGUSR1 )
 ReplicatorDriver64::terminate(i_signalNumber);
 cout<<"return from ReplicatorDriver64::terminate"<<endl;
 return;
void ReplicatorDriver64::terminate(int i_signalNumber)
 cout << "Received a User Signal 1( terminate ) "<<endl;
 struct sigaction act, oact;
 sigfillset(&act.sa_mask); // set all the signal flags in the sigmask argument
 act.sa_handler = SIG_DFL; // set defaul action flag to segnal
 act.sa_flags = 0;
 m_processStatus = false;
}

The C and C++ standards say that the only thing you can rely on doing in a signal handler is to read and write global volatile variables, abort the program, or call the signal function.
The Unix standard, which applies to Solaris, is more lenient. By default, a signal handler is run on the process stack, although it is possible to specify that a given signal runs on a different stack. If the stack actually used has enough space, you can call functions.
But the Unix standard limits the system functions that you can call. You can call only those system functions that the man page says they reentrant and safe to call from a signal handler. Any function that calls malloc or free is generally not safe, and I/O routines often involve calls to malloc or free.

How to automatically actualize UWL after return from WebDYNPRO?

Hello,
in the universal worklist (uwl) i have configured a workstep to open a Web Dynpro application instead of the SAP GUI. This works fine and i can process the Workflow.
But after processing of workstep I returns to the UWL using
WDPortalNavigation.navigateAbsolute(          "ROLES:portal_content/tm.eop.fd.eop_root/tm.eop.fd.content_root/tmcz.eop.fd.tmcz_root/tmcz.eop.fd.my_workspace/tmcz.eop.ro.my_workspace/my_workspace/tmcz.eop.iv.uwl",          WDPortalNavigationMode.SHOW_INPLACE,
                    (String) null,
                    (String) null,          WDPortalNavigationHistoryMode.NO_DUPLICATIONS,
                    (String) null,
                    (String) null,
                    (String) null);
In the UWL there is non relevant item (item that was processed in WebDynpro) and it angers users.
It is possible to actualize UWL automatically after return from WebDYNPRO application? WebDYNPRO is opened in the same window and frame as UWL.
Thanks for your help.
Ondrej Lednicky

Followed what vinay and Timo sugguested:
One solution is to use a af:dialog in the popup where you define a dialogListener to catch the outcome of the dialog and if it's OK you call your other method.
I wrote method code in back bean like this:
    public void refreshBillFromDialog(DialogEvent dialogEvent) {
        // Add event code here...
        if (dialogEvent.equals(false)){
            return;
        AdfFacesContext adfFacesContext;
        adfFacesContext = AdfFacesContext.getCurrentInstance();
        adfFacesContext.addPartialTarget(Bill4NewReceiptPending);
        //actionEvent.getComponent().processUpdates(FacesContext.getCurrentInstance());
        BindingContainer bindings2 = getBindings();
        System.out.println(" refreshBillFromDialog:bindings2: "+bindings2);
        OperationBinding operationBinding2 = bindings2.getOperationBinding("ExecuteWithParams");
        Object result = operationBinding2.execute();
        if (!operationBinding2.getErrors().isEmpty()) {
             return ;
And it works: the adf table(Bill4NewReceiptPending) in the calling page will be refreshed after the dialog popup was closed!
Thank you all!
What's more, I found even if I use bounded workflow calling instead of using popup dialog calling, the returnListener wasnot executed either.
And there is still a issue in the popup Dialog: The strange behavior of checkbox selection, see the thread:
Why the page cannot refresh correctly after making checkbox selection?
I tried and put aside for some days, and have no idea yet.
Can anyone give helps?
Thanks!

Network issues after returning from sleep mode

I'm noticing this issue on T440, Twists, T420s, whether it's Windows 8, Windows 8.1 or Windows 7. Sometime around the end of last year and the beginning of this year, my users suddenly started reporting problems with the machines after returning from sleep mode. The network adapter (whether plugged in or using wifi), would show limited connectivity and would not connect to the internet until the machine is rebooted.
I've tried updating drivers, using system restores, disabling the network adapters from shutting down to conserve power, OS network diagnosis & network adapter resets, none of which has worked. Hibernation is disabled on all machines.
The only fix I have is to reinstall the OS over the top of the system and reinstall all updates. Looking for help with this issue.
Thanks!
Solved!
Go to Solution.

Hi Mertz74,
Thank you for replying us back!
Please check with uninstalling power manger and reinstall it with latest driver.
Download chipset driver from Lenovo drivers page and install it.
Please check with above option to resolve the issue.
Below is the link to enter the downloads page and download updates accordingly, please click on "Select Product" then in "QUICK PATH" enter the MTM no. select the exact model.
http://support.lenovo.com/en_US/downloads/default.page#
Hope this helps. Do post back if issue persists!
Best regards.
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Close the window (browser after execute business action

I have ceated a JSP which will trigger a popup. How can I close the popup after executing some business action in the pop.jsf ?
in addition, since my popup will return value to window.opener, but I have tried that I have a page forward in the popup, it cannot locate the window.opener and hence cannot return value to the opening windows but only return me error 404 page not found.
actually my popup is just like a searching form, user can input some string to serch the DB and then display the data in datatable. then user can pick up the record he would like to choose and returning a code back to the opening windows...so i want to close the popup, or returning the value to the opening windows if i have a screen refresh in the popup
Can anyone help in this issue? Many thanks

Hi,
I'm not sure I've fully understood what you require... but here's something you can try.
Lets say that you search for some user entered criteria and display results to the user in the pop up JSP. I am assuming that there would be some user action on which you want to return something to the parent window and then close the child window.
You can access the parent window using:
window.opener.document.<form name>.<field name>
and then close the pop up window using a simple window.close();
On the other hand, if you want to close the window w/o any user inputs (directly after the server side processing), then make the server side processing send a status parameter back to the pop up window. For example, set a parameter in the request which will trigger a JavaScript in the pop up window to close itself.
Hope this helps.
Cheers !
Vinay

CSCsx29696 - percentSUPQ-4-CPUHB_RECV_STARVE - receive queue stuck after throttling on 2960

Hello, I have a problem with Cisco Catalyst 2960 with IOS ver 12.2 (35)SE5.
4 years ago we purchased 10 Cisco Catalyst 2960 with IOS ver 12.2 (35)SE5 and now operating them.
After 4 years of normal working one of Cisco Catalyst 2960 became bad. After switching 2 computers to any FastEthernet interfaces in the console I see:
%SUPQ-4-CPUHB_RECV_STARVE: Still seeing receive queue stuck after throttling
%SUPQ-4-CPUHB_SLOW_TRANSMIT: CPU Heartbeat Tx buffer not returned
I tried to upgrade the IOS on the following: IOS Release 12.2(53)SE1, IOS Release 12.2(55)SE, IOS Release 12.2(55)SE9 but where was NO EFFECT.
Please, tell me what shell I do to fix this problem.
Thank you.
Technical engineer, Tischenko Kirill.

Hello Tischenko,
Trust you are doing great.
Have you tried configuring the workaround mentioned in the Bug CSCed03214
Workaround:
1) Configure the interface for full-duplex instead of half-duplex.
2) Find the interface that is receiving 1-byte frames and correct the wiring and/or
problem on the connected device.
Additional Information:
To find the interface that is receiving 1-byte frames, use the command show platform
port-asic receive port-lockup.
If an interface is configured for 10Mbps half-duplex, but shows non-zero and incrementing
ifix counters, reconfigure the interface and connected device for 10 Mbps
full-duplex, or 100Mbps or 1000Mbps (any duplex).
If an interface is configured for 10Mbps full-duplex, 100Mbps or 1000Mbps (any duplex),
but shows non-zero and incrementing ifix counters, the connected interface
or wiring is likely the cause of the 1-byte frames.
Regards,
Mohit
** Please rate if the post is helpfull

Unable to refresh parent swing form components after returning from child

Hi,
Not able to refresh the parent swing form components after returning from the child form.
I am having problem in setting/resettig values to the parant swing form components after returning from child form. In parent form, I am entering values in some of the fields and clicking on Search button in parent form which will open a child window with the search results in JTable. Now selecting a row and writing the selected data to an ArrayList and returning back to the parent. I am able to see the values in the ArrayList, but not able to set any value to any of the parent form components by using the formtextfield.setText("value").
Thanks
Yakshak

create another project
a frame with a formattedTextfiled and a button
the button to open a child window
in the child window use say a JTextField to simulate a search result (type in some dummy data)
now add the arraylist code that produces the problem
if this stripped-down version of your program has the same problem, post all of the stripped-down code,
so we can see what you're doing.

Power manager crashes after returning from standby mode.

I have a T400 2767 WU6 running Windows 7 Pro-64bit.. After returning from standby mode, power manager crashes (version 3). All the software installed is supposed to be compatible with win7 pro 64bit.
Any help would be greatly appreciated.

Does this issue appear from the beginning?
Possibly the OS was installed several time ago and now the registry entries are corrupt.
Therefore the system busy egg timer could appear.
Im not 100% sure it will help but possibly you should reinstall the whole OS
On the fresh installed OS all should works much faster

Windows stuck after return of s2r

Similar Messages

Maybe you are looking for