Windows tech preview build 9860

i have installed the above build and everything works fine except for two items.
1 I cannot use the mouse to open the chimes display.
2 Microsoft mahjong and tap tiles freeze before opening
can you help?
thank you
dinobob1

Hello,
I'd ask in the
Windows 10 Technical Preview forum on Microsoft Community.
As the Microsoft Community is on a different platform, we cannot move the question for you.
Once there, click on Participate near the top of the screen, and select 'Ask a Question' or 'Start a Discussion':
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Similar Messages

  • Preview Build Section gone from Windows Tech Preview

    So, I noticed that after updating to Windows Tech Preview Build 9860, the preview build section is gone from my settings in zPC settings. Is this a glitch or did Microsoft temporally remove it? Thanks.

    It's there, you're just not looking in the right place.
    There are two settings Apps - PC Settings and zPC Settings.
    Look in PC Settings, under
    Update and recovery.  The Preview builds section is there in build 9860.
    -Noel
    Detailed how-to in my eBooks:  
    Configure The Windows 7 "To Work" Options
    Configure The Windows 8 "To Work" Options

  • Windows 10 Technical Preview Build 9860

    After restart is Windows 10 Technical Preview Build 9860 update will resume ? 

    Hi,
    From my observation, if I click download now, it would create a BITS task:
    We can use following command to check:
    Import-module bitstransfer
    Get-bitstransfer –allusers
    From the output, we can see the system account created a BITS job for transferring, under the C:\Windows\Software Distribution\download, we can get the temporary downloaded file, which is approximately about 2.5G.
    After we restart, and go to C:\Windows\Software Distribution\download, the temporary file is gone.
    If I click the download again, the BITS would create a new task, a new temporary file, if we compare the JobIds of the two times downloading, they are totally different.
    Alex Zhao
    TechNet Community Support

  • Problem with System Metrics SM_CXSIZEFRAME + SM_CXPADDEDBORDER in Windows 10 Preview (Build 10041)

    Maybe this forum is the wrong place to ask something about Windows 10 Preview, but I did not find a dedicated place to report
    programming problems as opposed to user problems:
    I program/maintain a 32-bit desktop (WIN32 API) application and try it now on Windows 10 Preview build 10041. I calculate the size of a window border with the help of the GetSystemMetrics function, using the constants SM_CXSIZEFRAME and SM_CXPADDEDBORDER.
    Originally, I only used SM_CXSIZEFRAME. This returned 4 pixels instead of the expected 8 pixels that I got on all previous windows versions up to Windows 8.1. Then I learned that already since Windows Vista one is expected to add the value of SM_CXPADDEDBORDER
    to get the full border size. (SM_CXSIZEFRAME alone only continued to work on Vista and beyond thanks to a little compatibility hack by Microsoft, with SM_CXSIZEFRAME still returning the full border size and SM_CXPADDEDBORDER returning
    yet 0, at least for 32-bit programs like mine.)
    Assuming that Microsoft finally switched off that compatibility measure on Windows 10 I query and add SM_CXPADDEDBORDER now as well. Unfortunately this does not solve my problem, as that system metric returns 0.
    Just to be on the sure side, I declared my program to support Windows 10 by using an embedded manifest and using the corresponding <compatibility> / <supportedOS> line with the Windows 10 GUID - this did not help either.
    As querying and adding those two system metric values is rather trivial (no need to include code in this question, I think), I don't have the slightest idea what
    I could do wrong here, this looks like Preview bug affecting 32-bit programs to me...

    I regret to inform you, that you have to live with this error for ever. Microsoft won't fix it... we reported an error of the Windows Error Reporting system (exists since Windows 8) and provided a reproduction (an application with one printed page of code,
    so very small and easy). It has never been fixed. 3 developers at Microsoft are involved and they confirmed, that it's a bug ... but... no chance. It's a strange company... I don't know what they mean with "we listen to our customers".
    PS: ja, nöd grad hilfriich mini Kommentär, aber die Type triibed eim eifach in Wahnsinn!! ... schinbar nöd nur öschtlich vo Bade, sondern au weschtlich
    Rudolf

  • Is Windows Technical Preview Build 9926 Last Build before Release (PC) ??

    As @ Mar 14 2015 - My WIN10 build Installations (9926) no longer have "Preview Builds" option,
    in Update & Recovery Menu (PC Settings)
    Build 10036 announced by rumour mill...
    Dell Precision 490 Desktop Intel XEON X5365 (Quadcore) x 2 Chipset X5000 321x/3221ESB Southbridge AMD Radeon HD7750 HDD ST3000DM001 3TB HDD ST2000DM001 2TB SSD OCZ Vertex 3 120GB SSD OCZ Vector3 128GB x2 RAID 0 Offline WD10EALX 1TB Barracuda 7200.10 250GB
    USB 3.0 WD MyBook 1230 3TB USB 3.0 WD MyBook 1130 2TB

    Microsoft Community got there first...
    http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/is-windows-technical-preview-build-9926-last-build/bb0bed43-4d64-4e1b-acaa-fee158f034ce
    Thanks Andre da Costa
    Dell Precision 490 Desktop Intel XEON X5365 (Quadcore) x 2 Chipset X5000 321x/3221ESB Southbridge AMD Radeon HD7750 HDD ST3000DM001 3TB HDD ST2000DM001 2TB SSD OCZ Vertex 3 120GB SSD OCZ Vector3 128GB x2 RAID 0 Offline WD10EALX 1TB Barracuda 7200.10 250GB
    USB 3.0 WD MyBook 1230 3TB USB 3.0 WD MyBook 1130 2TB
    We only reply to questions posted in TechNet forums.
    We don't go to MS Community and find out if the same question has been answered or not before we post the replies.
    There is no such thing as who gets "there" first.

  • Windows10 tech preview build 10041 doesn't get updated for some reason

    is there a way to force an update? I believe there were a couple of updates , but for some reason my build didn't get updated
    tx,
    D

    Hi,
    At least, we have preview build 10049 now, if you want to experience it, then you can change the install speed to "fast" in Settings\Update&Recovery\Windows Update\Advanced Options. If you don't want to experience it, then leave the setting
    in "Slow". If you've already set to fast and didn't get any updates, then pleaes check the following registry:
    Open regedit.exe
    Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
    Ensure the following values exist:
            {value name}, {value type}, {value data}
    BranchName, REG_SZ, fbl_impressive
    ThresholdOptedin, REG_DWORD, 1
    ThresholdRiskLevel, REG_SZ, low
    Delete all other values
    Open Settings
    > Update & recovery > Windows Update
    Tap or click Check
    for updates
    System also has a built-in troubleshooter, launch control panel\All control panel items\Troubleshooting\System and Security\Windows Update, run this troubleshooter.
    Regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Windows 10 preview build 10049 BIG PROBLEM

    hello,
    i got a very big problem after updating to build 10049. after the installation was complete my laptop restarted and i got a black screen with in the botom right corner the build number 10049. after a couple of hours the laptop restarts itself but it keeps
    getting on this black screen.
    i tried a iso of windows 10 preview latest iso build on a usb stick but with every solution i try: format, repair it keeps getting the same error that there is a problem with unmountable bootdevice.
    even using my official windows 8 dvd gets the same problem
    i'm lost. i dont know how to solve this problem.
    can someone please help me with this?

    This is not a one off, it is repeatable on brand new disks.
    I previously had the original win10 preview build installed on this hard drive = no problems.
    I then did a fresh install of build 9879 from CD. Install completed untill it got to the reboot phase = it would not reboot - the hard drive was not recognized in the bios anymore.
    tested broken hard drive in another computer = works
    tested broken hard drive in 2nd connector on my laptop = fail (still not seen by bios).
    tested a few other sata disks I have laying around on both connectors of my laptop = pass.
    upgrade my bios as there is one version higher than I had. = fail (still not seen by bios).
    boot from broken hard drive on another computer and finish the OOB portion of the win 10 preview install = pass
    So it seems clear that the hard drive is still working, but just not recognized on the original computer. It is only 2 months old so I get it replaced under warranty. Replacement disk is recognized by bios, yeah! I then restore image of broken hard drive
    to this replacement. Disk is still recognized by bios. I boot up from this disk on my laptop. It works OK until first reboot, then is not recognized by bios anymore.
    Computer = Toshiba Satelite P305 PSPC8U-01400Q
    Hard disk = WD blue 1TB  model: WD10JPVX-22JC3T0
    Note: also with windows 8 running on this computer and the broken hard drive installed in second connector, windows also does not see it, neither through disk manager nor through diskpart command line. But if I boot up in Linux from a bootable USB flash
    drive, then I can see the (broken disk) on this same computer. Yes I can see it and I can read and write to the filesystem, even though it is still not seen by the bios. 
    HI
    Disable PUIS (Power-Up In Standby) with HDAT2.EXE  With PenDrive BOOT MS-DOS

  • Why I can't get a ESD or ISO of Windows 10 Tech Preview Build 9903?

    I Want Download it to See More what new change on Windows 10 :( MS not support download it.Oh My God The Build 9903 is VERY GOOD!!!!Kernel 10.0.9903!!!Demo "Cortana" on PC,Laptop,Surface
    I want see link i will be not leak this build :)

    It's nice to see people excited to have new features, but why are you running software that Microsoft has not published?  What are you doing that's so important that you can't wait a few more weeks?
    Do you not know that hackers often add malware to unofficial versions?
    Microsoft has already said it will be 2015 before you see the next official Windows 10 build.
    Be patient, and think twice before trusting your data to whatever software you find on the Internet. 
    -Noel
    Detailed how-to in my eBooks:  
    Configure The Windows 7 "To Work" Options
    Configure The Windows 8 "To Work" Options

  • Problem installing Windows Technical Preview build 9926

    I am not able to install the Technical Preview on my computer. Everything looks fine and in the end it says "applying computer settings" and counts the percents before it reboots again.
    During the boot it says evaluation build 9926. Then it says Restoring the old windows as it was before... I can't get this to work.
    This is the windowsupdate.log file and the last attempt of installing at the end of the file. 21st of march.
    https://onedrive.live.com/redir?resid=EFA0853808EA8416!80492&authkey=!APrJtEAGwfnZydU&ithint=file%2clog

    PH
    Do you know that you can make an ISO to install 10041 and not have to install 9926?
    http://microsoft-news.com/download-windows-10-build-10041-iso-image/
    Wanikiya and Dyami--Team Zigzag

  • Stuck on preview build 9860

    Setup appears to complete but then on configuring fails and rolls back my install to 9860 every time. This locks me in a loop where I am updated again to 9879 and rolled back repeatedly. I have tried everything I can think of to resolve this. I can really
    not afford to do a clean install as I have an old version of Adobe Creative Suite CS3 on this machine that I cannot reinstall (no media) that I need for work.
    http://1drv.ms/1HadZeB contains my setupact and setuperr files.

    Hi,
    I found repeated info in the log "Unable to get message handle
    80092009 c:\windows\system32\drivers\fwlnk.sys", it is about Toshiba Firmware Linkage system driver, please check the Toshiba offical website, update the firmware of the Toshiba related device, meanwhile, I would you have a full check
    of your system, make sure to have all latest drivers installed, If you have any external device (expect mouse\keyboard)connected to the PC, please unplug them as a test.
    Yolanda Zhu
    TechNet Community Support

  • WM_INPUT message no longer sent in Windows Technical Preview build 9879?

    I had software that relied on the WM_INPUT message and it used to work with previous builds (and Win 8.1). I needed it for remapping a wireless keyboard's fn key to CTRL key (I was using an Autohotkey script which captures WM_INPUT).
    But now looking at the messages sent when typing in the keyboard in a win32 app, only the button down and up are being sent. What changed? how to work around it?
    Now I am using a hacky combination of user32.dll's SendInput and some methods from setupapi.dll to read/send the special key values.

    Hello ibalhashim,
    From your description, do you mean that after remapping the fb to ctrl, then only the button down and up are being sent?
    If it is, please share us how you have remapped the keys and please test if removing the remapping operations, the WM_INPUT message would restore. This would help narrow down this issue to see if it is caused by the remapping operations or the win32 app.
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Windows Technical Preview Build 9926 update

    Hi,
    I am trying to update my Windows 10 TP installation and it seems that it fails to download.  I am behind a proxy server in the office with no way around it.  Windows Update fails with error 0x80072ee2.  What I have picked up is that I can
    get the update list if I set a proxy server in BITS using "bitsadmin /util /setieproxy localsystem proxy1:port "bypass list".  However bits fails to download the updates returning either Error or Transient_Error.  Can you please assist
    with this issue?
    Regards,
    Riaan
    EDIT: I set proxy settings of each bits download job to PRECONFIG and the updates downloaded and installed.

    Hi,
    Did you set the proxy server via IE? Do you mean that the Windows Update Client ignore the proxy settings? To make Windows Update use the proxy setting, please execute the following command from cmd
    Netsh winhttp import proxy source=ie
    You can refer to this following KB for "how Windows Update finds proxy settings"
    How the Windows Update client determines which proxy server to use to connect to the Windows Update Web site
    http://support.microsoft.com/kb/900935
    Yolanda Zhu
    TechNet Community Support

  • Windows 8.1 bad updates, it updates to look like Win Tech Preview!

    Windows 8.1 without last updates has a some features that are different to Windows 8.1 with last updates, here are some:
    1) Windows 8.1 WU ( Without updates ) has a bottom actionbar track when you right click it, and Windows 8.1 WTU ( With last updates ) have white panel like Windows Tech Preview! It have shut down button, that didnt exist, new ALL APPS screen
    and other changed functions!
    Why Microsoft do that? Some peoples love our Windows 8.1 with its features, and they dont want features that are in Win Tech Preview!

    Hi,
    First, I would like to confirm what the "bottom actionbar track" stands for. Would you please post back the screenshot of your issue?
    Considering that the issue can be caused by corrupted update installation or configuration. Please list out the updates you have installed before this issue.
    I suggest you perform a system restore before these updates and then try to install them one by one manually to see if there is one of them cause your issue, then post back for our research.
    Kate Li
    TechNet Community Support

  • Snap assist doesnt work on build 9860

    hi.. i just installed preview build 9860 and the snap assist is no more working. pls fix it and bring it back. or can u tell me how to activate it ? thanks..

    Hi,
    Apologize for that.
    It seems it would work at my side. holding the left mouse key and then drag the window to the left or right edge, then the border would show up and displayed as below when drop the mouse:
    Also Win + arrow keys would work here:
    No more actions have been done at my side, just leave this machine running.
    Edit: Also worked with a reboot.
    Best regards
    Michael Shao
    TechNet Community Support

  • WIndows !0 build 9841 Task Bar problem.

    My windows start button dissapears after a few seconds leaving me without no search bar.this only happens when i set my start menu to show on my desktop screen otherwise when I use the windows 8 start menu it doesn't disappear.

    Hi AryanPillay
    If you have interests, I'd like to share the blogs about later Windows Technical Preview builds with you, they're more stable and have improved experience.
    http://blogs.windows.com/bloggingwindows/2015/01/23/january-build-now-available-to-the-windows-insider-program/
    http://blogs.windows.com/bloggingwindows/2015/03/18/windows-10-technical-preview-build-10041-now-available/
    You can submit your feedback via Windows Feedback App if you have some suggestions.
    Regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

Maybe you are looking for