Windows to Mac os x Leopard

I want to get a Dell xps computer. I like vista, but Mac os x leopard is just insane. One of the adds said that I could transfer my files to mac files. This made me happy, but I'm not quite shure what he said. Could anyone give me any details on how to do this, what I will get ( does it include Ilife, Iwork etc.) and if it is trully free( any programs I have to buy inorder to convert the files to mac os x leopard.). Any additional information will be great. Thnx.

Hi and welcome to Discussions,
see here for ways to migrate your files from Windows to Mac OSX http://support.apple.com/kb/HT2518?viewlocale=en_US
Just for clearance: Mac OSX does not run on non-Apple computers.
So if you plan to use OSX Leopard on your new Dell, that won't work.
(Sorry if I misread your post, but somehow it sounds to me like you plan to use OSx on your Dell).
Regards
Stefan

Similar Messages

  • When I am re-installing the Mac OSX snow leopard onto an older Mac I run into the window that says select the disk where you want to install Mac OSX but nothing is there to select

    I am trying to re-install the Mac OSX snow leopard onto an older I mac with a new hard drive.  I run into the "select the disk "where you want to install Mac OSX but there is nothing in the window to select. Any advice?

    After you install a new hard drive, you need to boot to another drive to initialize it to MAC OS Extended (journaled) format and create the partition(s) on the drive. You do this using Disk Utility. Otherwise, the mac operating install process doesn't see a formatted disk to install to.

  • Mac os x Leopard for windows

    I am downloading windows to my mac. Do I need the Mac os x leopard disk? Or will windows work without it?

    The reason they recommend installing Leopard (or OS X in general) is because OS X has Boot Camp Assistant, which makes it easy to set up your Windows partition. However...
    You don't actually need Boot Camp Assistant to install Windows. All it really does it create the Windows partition for you, but the Mac is just a computer: you can just boot into the Windows DVD, and make/format the partition yourself.
    However, if you want to ensure the best performance, you should have your OS X disc handy when Windows is done installing because the OS X disc contains Windows drivers.

  • Mac OS X Leopard installation disc after I install Windows Vista

    Hi everyone! Do I need to put my Mac OS X Leopard installation disc after I install Windows Vista? I try to run the windows without install Mac-specific driver for windows but it restarted and back to Mac OS. The frustrated thing is I did not bring my Mac OS with me. Anyone has any solution? Or how can i request a installation disk from Apple? Thank you!

    Hi everyone! Do I need to put my Mac OS X Leopard installation disc after I install Windows Vista? I try to run the windows without install Mac-specific driver for windows but it restarted and back to Mac OS. The frustrated thing is I did not bring my Mac OS with me. Anyone has any solution? Or how can i request a installation disk from Apple? Thank you!
    Yes you will need to install the apple drivers for win vista. When you boot from a cold start, have you tried holding down the option key to choose which OS to boot from? If you have then, you could try going into startup options from the mac side and choose win vista if it appears. That could be risky though, as you mentioned you do not have the mac install disk. If problems arise you may need the mac install disk to undo the changes.

  • Can Windows 8 be installed on Mac OS X Leopard?

    I'm tryina boot camp my Mac with Windows 8. I'm currently running on OS X Leopard. I seem to be repeatedly running into problems and most searches are just turning up that apparently Vista was the latest Windows type to run on Leopard. Is this really the case? Do I need to upgrade to Mountain Lion to get Windows 8 running?

    Upgrade to 10.7 or 10.8, and remember that Windows 8 is unreleased so there is no support from Apple or Microsoft yet, Win 7 drivers may or may not work.

  • How can I go back into the Mac os snow leopard if I'm on windows 7 on my MacBook pro?

    I installed Windows 7 Ultimate 64 bit into my MacBook pro using Bootcamp, but I can't go back into the Mac OS Snow Leopard. Every time it starts up, it goes into Windows. Can someone please help me?

    Boot Camp
    MacBook Pro
    X on startup
    install Apple drivers in Windows and use Boot Camp control panel there, or from quick switch taskbar.
    hold option key on startup.
    read the guide for boot camp.
    Apple Support Boot Camp

  • Formatting a USB flash drive for Mac OS X Leopard & Windows XP

    I'm pretty new to Mac, so forgive me if this seems a very basic question.
    How do I format a USB flash drive so that it can be seen by both an Imac running Mac OS X Leopard and a PC running Windows XP?
    If one or other machine can't see the drive it makes transferring files really frustrating.
    Your advice would be appreciated.
    Thanks.

    You can either use Windows or OSx to format the flash drive to FAT32. This will allow you to read and write from OSx and Windows. If you just bought the flash drive then double check before you format as it may already be formatted to FAT32.
    Use Disk Utility from OSx to format your flash drive OR from windows, click on *My Computer* and then highlight the drive letter and choose File from the top menu and then Format.
    Axel F.

  • I transferred files from a NAS server to the Mac Mini Snow Leopard Server and now some of the files have Custom Access and can't  be opened by some users.  How do I fix this?

    We're setting up our Mac Mini Snow Leopard Server, and in the process transferred files that had been stored and accessed from our Blackarmor NAS server over to the Mac.  These files were all created on PC's and are Office Excel files, WordPerfect files or PDF's.  When you look at the files on the Mac from the Mac and bring up Get Info for the affected file, it says that the file has Custom Access.  The files that work properly don't have that configuration.  I can access and open the files on some computers, but some users can't open the files from their computer even though they can see it.  We're all using PC's and they get the Error:  Access Denied-Contact your administrator--or something similar.  I've seen on the web similar issues and it may have something to do with ACL permissions.  I don't know enough about Mac OS to understand this, but what is baffling is that they can be opened from some PC's but not others, and all of the Users have the same accessibility to the files.  Thanks for a solution!!

    Oh, on the losing Internet, try this...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.
    PS. Your English is quite good & completely understandable.

  • HT1338 Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

    Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

    If you look at the User Tips tab, you will find a write up on just this subject:
    https://discussions.apple.com/docs/DOC-4053
    The subject of buying/selling a Mac is quite complicated.  Here is a guide to the steps involved. It is from the Seller's point of view, but easily read the other way too:
    SELLING A MAC A
    Internet Recovery, and Transferability of OS & iLife Apps
    Selling an Old Mac:
    • When selling an old Mac, the only OS that is legally transferable is the one that came preinstalled when the Mac was new. Selling a Mac with an upgraded OS isn't doing the new owner any favors. Attempting to do so will only result in headaches since the upgraded OS can't be registered by the new owner. If a clean install becomes necessary, they won't be able to do so and will be forced to install the original OS via Internet Recovery. Best to simply erase the drive and revert back to the original OS prior to selling any Mac.
    • Additionally, upgrading the OS on a Mac you intend to sell means that you are leaving personally identifiable information on the Mac since the only way to upgrade the OS involves using your own AppleID to download the upgrade from the App Store. So there will be traces of your info and user account left behind. Again, best to erase the drive and revert to the original OS via Internet Recovery.
    Internet Recovery:
    • In the event that the OS has been upgraded to a newer version (i.e. Lion to Mountain Lion), Internet Recovery will offer the version of the OS that originally came with the Mac. So while booting to the Recovery Disk will show Mountain Lion as available for reinstall since that is the current version running, Internet Recovery, on the other hand, will only show Lion available since that was the OS shipped with that particular Mac.
    • Though the Mac came with a particular version of Mac OS X, it appears that, when Internet Recovery is invoked, the most recent update of that version may be applied. (i.e. if the Mac originally came with 10.7.3, Internet Recovery may install a more recent update like 10.7.5)
    iLife Apps:
    • When the App Store is launched for the first time it will report that the iLife apps are available for the user to Accept under the Purchases section. The user will be required to enter their AppleID during the Acceptance process. From that point on the iLife apps will be tied to the AppleID used to Accept them. The user will be allowed to download the apps to other Macs they own if they wish using the same AppleID used to Accept them.
    • Once Accepted on the new Mac, the iLife apps can not be transferred to any future owner when the Mac is sold. Attempting to use an AppleID after the apps have already been accepted using a different AppleID will result in the App Store reporting "These apps were already assigned to another Apple ID".
    • It appears, however, that the iLife Apps do not automatically go to the first owner of the Mac. It's quite possible that the original owner, either by choice or neglect, never Accepted the iLife apps in the App Store. As a result, a future owner of the Mac may be able to successfully Accept the apps and retain them for themselves using their own AppleID. Bottom Line: Whoever Accepts the iLife apps first gets to keep them.
    SELLING A MAC B
    Follow these instructions step by step to prepare a Mac for sale:
    Step One - Back up your data:
    A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
    B. Clone to an external drive using using Carbon Copy Cloner.
    1. Open Carbon Copy Cloner.
    2. Select the Source volume from the Select a source drop down menu on the left side.
    3. Select the Destination volume from the Select a destination drop down menu on the right
    side.
    4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
    sure to opt for that.
    Destination means a freshly erased external backup drive. Source means the internal
    startup drive. 
    Step Two - Prepare the machine for the new buyer:
    1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
    2, Remove any Open Firmware passwords or Firmware passwords.
    3. Turn the brightness full up and volume nearly so.
    4. Turn off File Vault, if enabled.
    5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
    Step Three - Install a fresh OS:
    A. Snow Leopard and earlier versions of OS X
    1. Insert the original OS X install CD/DVD that came with your computer.
    2. Restart the computer while holding down the C key to boot from the CD/DVD.
    3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
    Optionally, click on the Security button and set the Zero Data option to one-pass.
    4. Install OS X.
    5. Upon completion DO NOT restart the computer.
    6. Shutdown the computer.
    B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because
    it is three times faster than wireless.
    1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
    Utilities window appears.
    2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button. 
    3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
    on the Erase tab in the DU main window.
    4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
    and set the Zero Data option to one-pass.
    5. Click on the Erase button and wait until the process has completed.
    6. Quit DU and return to the Mac OS X Utilities window.
    7. Select Reinstall Lion/Mountain Lion and click on the Install button.
    8. Upon completion shutdown the computer.
    *If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

  • I lost my ability to use Microsoft Offic for Mac, when I upgraded my MAC from Snow Leopard to Mountain Lion! HELP!

    HELP !
    After I upgraded my operating system on my mac, (from  Snow Leopard (10.6 ? ) to Mountain Lion (10.8.2), virtually ALL of my documents (recipes, update logs, information of untold things), have been denied to me with my Microsoft Word for Mac (which I have used since I purchased my mac in Aug.2008).
          I now get a window that tells me "You can't open the application "Microsoft Word" because PowerPC applications are no longer supported." (Needless to say, I cannot use Excel or anything else, either!)
          Yet, I can still access them, fully (read and even print fro them), individually, by dragging a file into my PREVIEW program!
          What gives?
          I am not a savvy programmer, nor do I confess to somehow being warned that this might happen when I upgraded my operating system.
         Is there any reasonable (easier?) way to continue the use of these (to me) very important files? I only upgraded because I upgraded my iPhone to a 4S and wanted everything to conform to  siimilar circumstances!
         What can I DO?

    You need to upgrade your copy of MS Office. You're using a version that is 8 years old (at least). You can buy Office 2011, which will work. You could also get a copy of Pages from the App Store, which is cheaper and will open Word files (though not perfectly). Or you could get a free Office clone, like OpenOffice or LibreOffice.

  • Can't print from Intel Mac w/Snow Leopard to HP 2600

    Can't print from Intel Mac w/Snow Leopard to HP 2600.  Upgraded from OS 10.4 and printer showed on printer list along with an Epson scanner. but continually shows printer as offline.  I finally deleted the HP Color Laserjet 2600n from the printer list.  When I attempted to re-install it, it doesn't find the printer at all.  I haven't attempted to use the scanner.  I also went to HP and downloaded the driver, no luck.  I've restarted the computer multiple times, tried it with the printer on, and printer off, as well as pulled the usb cable in and out both ends.  No error message on the printer display and it gpes through normal warmup until it shows the green light.  I run software update and it shows no updates needed.  Help!

    Go down a few more posts to the question about the C7180. Answer:
    "Re: iPhoto 08 + HP Photosmart C7180
    Posted: Aug 19, 2007 1:26 PM in response to: Daniel_D
    When you press print the first window is pretty basic.
    When you select print on that the next window should have an advanced option.
    Click that and see if any of the options in the 3rd dropdown box allow you to specify the 'paper tray'.
    AC "
    In this new windaow, click "advanced", go to "paper type/quality" and choose " best" and a photo paper. Then you will be able to choose a paper source (photo tray).
    Once you have these settings, under presets do "save as", and you can choose the preset instead of going to advanced.
    If you have the latest software and drivers downloaded from HP, this will work.
    Scott

  • MAC OSX SNOW LEOPARD 10.6.3 current version INTEL(R) CORE(TM)2 DUO 2.4 GHZ ,4GB RAM, 250 GB HDD compatible OS Version Clarification

    Hi Friends,
                     I have Macbook Pro 14 Inch INTEL(R) CORE(TM)2 DUO 2.4 GHZ ,4GB RAM, 250 GB HDD, unable to login into MAC OSX Snow Leopard 10.6.3 Version but with Boot Camp i can login into Windows 7 Home Premium, so i would like to clean the HDD and install NEW Version MACINTOSH OS, Which of the Latest OS perfectly workout to install in my MACBOOK PRO, I didnot have LAPTOP Backup disc......

    Check that your computer is compatible with Mountain Lion/Mavericks.
    To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
    MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
    our Mac needs:
    OS X v10.6.8 or OS X Lion already installed
    2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
    8 GB or more of available space
    If your computer isn’t compatible, you might be able to upgrade to Lion.      
    Computer Compatibility - Lion                       Lion
    Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.      
    Application Compatibility
    Applications Compatibility (2)

  • Top 15 or 20 mistakes I made installing Windows XP using Boot Camp/Leopard

    There are pitfalls installing XP in Boot Camp. I'm pretty sure they are mostly covered somewhere on the Apple Bootcamp Support page. Here's what this Windows virgin found in the past few days installing XP on my MacBook Pro running Leopard. By all means, feel free to correct or add to my comedy of errors.
    1) First run Software Update on your Mac to make sure you are working with the newest Mac software and firmware. If you are obsessive, run Disk Utility afterwards and restart. (I did this)
    2) Follow the instruction in Apple's Boot Camp Installation Guide pdf to the letter. Don't skip anything. Don't assume anything. Print it if you can't run it on another machine during the Windows install. (I looked at it, not well enough.) Read #3-7 before you start the install.
    3) Run Boot Camp Setup Assistant to "preformat" a Windows partition. 5 gigs is too small a partition and means more work later since XP eventually used up 5.6 gigs of my 32 gig partition (26.4 gigs free after a fully updated install of Win XP Service Pack 3 + anti-virus software + Adobe Reader + one app). (I avoided the too-small partition by dumb beginner's luck but see #4)
    4) If you mess up your Windows partition and decide to start over, restart in Leopard and use Mac's Boot Camp Assistant to remove any inoperative Windows partition. If you are obsessive, run Disk Utility afterwards and restart. Then use Boot Camp Assistant again, as in #3 (I got to use this feature, too.)
    5) Use the right Windows software. Win XP Service Pack 2 does install and can be updated after you have a solid XP installed with driver. Before you update, read #8-10. (I managed to buy the right XP software)
    6) During installation, with the Windows Installer, you must reformat the Windows partition created by the Boot Camp Assistant. Don't get fancy and repartition: just format. Read pp. 13-14 of the Apple Boot Camp Installation Guide pdf. The Windows NTFS format using long, slow, careful reformat takes a looonnng time, long enough to make me think the installer was hung, except the cursor was blinking. (I did this but only after I tried to install the dumb way, without the Win installer reformat. If you don't reformat, you'll see a black screen, "Disk Error" with a flashing cursor at the top. Time to refer to #4.)
    7) When Windows reboots after a successful install of XP SP 2, immediately eject the Windows install disk using Windows and immediately insert the Leopard Disk to install Windows drivers. (I did this. Some report problems with this step, but it worked for me.)
    8) When you restart in Windows, run Windows Update to install everything except Service Pack 3. Mouse around the update feature a bit. If you don't update to SP 3, there is an optional install of a new IE 7 and an XP update that fixes some installer issues. (I did the optional install before I figured out #9 and tried to install SP 3 a couple of times. See #10 for what happens if you try to install SP 3 before #9.)
    9) Using IE 7 in XP, go to the Apple Boot Camp page to download and install Boot Camp 2.1 Update For Windows XP. This installs on the Windows side, not in OS X. ( I did this, throwing caution to the wind and choosing "Run" when the download options of "Run" or "Save" appeared.) When BCUpdateXP.exe opens, the installer asks you to choose repair/update or uninstall. Choose repair/update. I think the machine needs a restart.
    10) Now install XP Service Pack 3 using Windows Update. If you try to install XP SP 3 before the Boot Camp 2.1 Update for Windows XP, you will receive the following error message:
    "There is not enough disk space on C:\WINDOWS\$NtServicePackUninstall& to install Service Pack 3. Setup requires a minimum of 4 additional mebabytes of free space or if you want to archive the files for uninstallation. Setup requires 4 additional megabytes of free space. Free additional space on your hard disk and then try again. Error Code 0x8007F003." It's a lie, assuming you set up a large enough Boot Camp partition at the outset. Both Windows and Disk Utility will tell you the size and available space of the Boot Camp partition.
    Like I said, everyone is welcome to add the next 5 or 10 ways to mess up. Without Search, this forum is rough.

    Because I created FAT32 partition using Boot Camp tool few days ago I installed my custom copy of Windows XP with SP3, IE7 and WMP10 integrated using nLite (for WMP10 integration use RVM Integrator). I did not use Boot Camp tool this time - I just booted CD using Option key. Then I installed Boot Camp 2.0 drivers you can find on Mac Disk 1. After this I installed Boot Camp drivers 2.1 update. In Add or remove Programs I checked drivers - I uninstalled old drivers which call identical, but you can skip this. Everything works fine BTW it is better to format your partition to NTFS - you have much less disk errors, you do not waste time for disk errors scans during Windows startup, your data are much more safe. If you need NTFS write permissions use great tool Paragon NTFS for Mac OSX or open source NTFS driver.
    Message was edited by: limo79

  • Using Mac OS X Leopard

    We got a new iMac, naturally with OS 10.5 for Intel. My qustion is how do you use Mac OS X Leopard ?
    1) Photoshop does not work.
    Note: I mostly use ImageMagic as my photos (hobby/family) mostly need little correction, but once in a while you want to play with layers and selections!
    2)GIMPshop does not work
    Note: see 1.
    3)Printing to OS X 10.3 shared printer does not work
    Note: it works from 10.4 laptop and the command >cupsctl BrowseProtocols='"cups dnssd"'< does nothing to me.
    4)SogudiBeta does not work
    Note: I know it works for some other people with my setup - but not for everyone and not for me.
    5) NeoOffice does not work
    Note: I wanted to look at a file and grabbed PPC version from my laptop - it opens and stays at the Dock, but no windows/menues is shown. Is it so Rosetta supposed to work?
    6)MatLab cannot find java, so the interface and debugging are broken. Graphics works, but X11 has to be freshly started along with MatLab.
    Now, i am a power user, and I might solve at least some of this (and other) issues. But am I supposed to @#$% with or to use new computer? Now 10.5.4 looks more like a PublicBeta.
    My problem is that before, I had only PPCs, so I have no suitable 10.4 disks to downgrade. Any thoughts?

    Thank you for the interest.
    1) I use (in 10.4) exaclty the one which does NOT work (in 10.5) - 7. At least I did not find a solution in google. I once solved the same problem with v6 (classic) which did not work in Classical environment of OS X. I found and removed accelerating plugins incompatible with Classics.
    2)You see my needs - I am not a graphical designer! I just want to have convenient set of menus I am used to. So I want shop.app, and not just .app.
    3)http://support.apple.com/kb/HT2275 - they know about it, but there solution does not work.
    4) it is a luck of an obvious functionality AND the drop of support to the Input Managers in 10.5 which drives me crazy.
    5)When the same kind of problems appeared in OS9 -> OSX transition it was the extensions that were broken in Classics. Here I am confused as I do not understand what is broken under Rozetta and how to find it to disable.
    6)There is only one thing you should know about MatLab - every next version cost to the user 1000$. Matlab R14 works, I know, but I have to use a remote license and update every 24 hours. But why should I break with my local R13 install I do not understand. I mean once again, like with Photoshop - I need a limited set of features, i could go for Octave (free) but it is again just to spend (=waste) time.
    My point is, that the only added functionality is the video playback. It plainly works, and works better. The preserved functionality is Office (via Rosetta). The rest is either yet undeveloped or broken. Looks like we should first install Windows/Linux on a separate partition, then get used to it and then forget about OS X. One need no OS X to have Matlab/Firefox/GIMP.
    The 10.5 box I got looked more like a web-enabled TVset and electronic typewriter. The other functionalities are to be built from scratch. Or downgrade to 10.4.

  • I just purchased Mac OSX Snow Leopard Software Version 10.6.3 before I install I would like to know if it will still keep my documents, etc? and not lose them?

    I just purchased MAC OSX Snow Leopard Software update to Version 10.6.3.  At present my MACBOOKPRO is Mac OS X Version 10.5.8.  Since this is the first time I have purchased new software upgrade for my MACBOOKPRO I would like to know before installation if it will keep my documents, etc. intact or would it lose them?  Appreciate any help?
    Darci13

    How to Install OS X Updates Successfully
    A. Repair the Hard Drive and Permissions:
    Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally. 
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    B. Make a Bootable Backup Using Restore Option of Disk Utility:
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    C. Important: Please read before installing:
    If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
    You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
    The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update.  While the installation is in progress do not use the computer.
    D. To upgrade:
    Purchase the Snow Leopard Retail DVD.
    Boot From The OS X Installer Disc:
    Insert OS X Installer Disc into the optical drive.
    Restart the computer.
    Immediately after the chime press and hold down the "C" key.
    Release the key when the spinning gear below the dark gray Apple logo appears.
    Wait for installer to finish loading.
    E. If updating:
    Download and install update(s) 
    Use Software Update, or
    Download standalone updater(s).

Maybe you are looking for