Windows Update Error 80244022 on windows Server 2008 R2

Hello i am unable to update my server which is Windows Server 2008 R2 x64
I am getting Error Code : 80246002
please guide me

This one may sort it.
You receive a "0x80246002" error code when you use the Windows Update or Microsoft Update Web sites to install updates
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Similar Messages

Windows Update Error 800B0109 after Windows Update Agent 7.6.7600.320 Installed

Hi, I have this error message when running windows update, it happened after Windows Update Agent 7.6.7600.320 installed.
Any idea how to resolve this?
Thank you.

Hi，
Please make sure that your antivirus application does not scan the files in the
%windir% \SoftwareDistribution directory on any computer on which Windows Update Agent is installed.
You can also temporarily turn off the antivirus application and check the result.
Or run the following commands, and press Enter after each command:
Net stop wuauserv
cd %systemroot%
Ren SoftwareDistribution SoftwareDistribution.old
Net start wuauserv
Try to install updates again.
Yolanda Zhu
TechNet Community Support
I tried the commands as well, still prompting the same error.
Thanks

Internet Explorer 9 not showing as not installed when using Windows Update - Error: Code 9C48 Windows Update encountered an unknown error.

I built a few new Windows Server 2008 R2 with SP1 VMs today and ran into a problem where Windows Update is not detecting the fact that Internet Explorer 9 is already installed. Internet Explorer 9 keeps showing up as an available update when
using Windows Update. When I try to install it as a test I get the error message: Code 9C48 Windows Update encountered an unknown error.
My normal build procedures include applying all the patches for the OS prior to any other work on the servers. The way I like to do the patching is to do every update other then IE9 in the begininng and once all the other updates have been
completed, install IE9 and then patch it if there are updates available. I followed this procedure on every build for the last year and I have not run into any issues until today. The only difference today is the latest patches that were released yesterday
April 10th, 2012. To test the theory that it may be one of the latest patches, I reinstalled Windows from scratch making sure to format the disks and then I installed IE9 right after the OS install without any other updates. Once the
server was rebooted, I checked Windows Update and Internet Explorer 9 still showed up as update (Not the Cumulative Update which normally shows up after an IE9 install) and yes, I did make sure to click the 'Check for Updates' link before I looked just
in case. My next test was to patch a couple of the servers I had built prior to April 10th, 2012. Those servers did not have any issues with the latest updates and they are not experiencing the same behavior as the newly built servers.
I ended up comparing the IE9 Version on the cleanly install OS (No updates were installed except IE9) and the servers I built last week which were patched. The versions are exactly the same.
My findings above lead me to believe that there is a problem with the latest IE9 install package (which includes the latest cumulative update) and the Windows Update detection component.
I guess I am looking for someone to report this up the chain to get this fixed so no one else runs into this problem. I know in some cases we may not be able to see additional IE9 updates until this is resolved.

I just started having the same problem.
I was creating a new VM in Vsphere from our 2008 R2 SP1 image and it hasn't been updated and repacked in a while, so i have to install about 60 updates, including IE9.
I went through my normal setup as i had just created 2 VMs and updated them on Monday with no problem.
I got the same error code as you. The install looks like it installed IE9, but the update is still showing up as available in Windows Update.
I deleted the VM, created a new one, chose all updates except IE, then did that and it still shows up again.
Then i deleted the VM, installed just IE 9 and it still shows up as available on reboot.
I have a script that i can use to reset/clear WSUS cache on the computer, (Software distribution folder, and the windows update log, and recreates a certificate), so i tried that and then rebooted and it still showed up.
I then decide ok, maybe the Image got messed up somehow, so i started creating a new 2008 R2 install from scratch last night and chose to update just IE9 as the first install. I did that, rebooted and it didn't show up in Windows Updates, so i though GREAT.
I proceed to kick off the 100+ downloads needed before i left and left the console up.
When i got in to work this morning, the updater seemed stuck on 31 of 102 updates, this one in particular: KB288516. I rebooted the computer, because it wouldn't stop and just seemed stuck since last night, which these updates should only have taken about
an hour to install at most. I log back in and sure enough, it now shows Internet Explorer 9 at the bottom of the update list as being needed for install.
I believe this is Patch Tuesday week, so maybe they screwed up something with the Windows Update detection engine, because it worked fine on Monday when i had to update IE9 on 2 VMs that i created.

Windows update error 0x80070BC9 with windows 7

Hi,
I have only one Windows 7 machine which has started to show 80070BC9 in Windowsupdate.log file when trying to install Windows updates KB2478662. I believe this refers to a "pending update" which needs to be completed before other updates can follow (normally
after a reboot).
I restarted the computer many times, tried to install this update manually, tried .Net cleanup tool, strated the computer in selective startup mode (without load startup items) and reset Windows update components. unfortunately I still
have the same problem.
I get the following in Windowsupdate.log file:
2012-02-07 15:42:17:069 328 e9c Setup WARNING: CBS EvaluateApplicability returned error, error = 0x80070BC9
2012-02-07 15:42:17:069 328 e9c Setup FATAL: Applicability evaluation for setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.4.7600.226" failed, error = 0x80070BC9
2012-02-07 15:42:17:069 328 e9c Setup FATAL: SelfUpdate check failed, err = 0x80070BC9
2012-02-07 15:42:17:069 328 e9c Agent   * WARNING: Skipping scan, self-update check returned 0x80070BC9
2012-02-07 15:42:17:069 328 e9c Agent   * WARNING: Exit code = 0x80070BC9
2012-02-07 15:42:17:069 328 e9c Agent *********
2012-02-07 15:42:17:069 328 e9c Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2012-02-07 15:42:17:069 328 e9c Agent *************
2012-02-07 15:42:17:069 328 e9c Agent WARNING: WU client failed Searching for update with error 0x80070bc9
2012-02-07 15:42:17:069 328 430 AU AU setting pending client directive to 'Reboot Pending'
2012-02-07 15:42:17:069 328 430 AU Changing existing AU client directive from 'Install Approval' to 'Reboot Pending', session id = 0x1
2012-02-07 15:42:17:069 328 3b4 AU >>## RESUMED ## AU: Search for updates [CallId = {87044891-5208-4538-8A04-FC019AE09325}]
2012-02-07 15:42:17:069 328 3b4 AU   # WARNING: Search callback failed, result = 0x80070BC9
2012-02-07 15:42:17:069 328 3b4 AU   # WARNING: Failed to find updates with error code 80070BC9
It's very important for me to fiind a solution without reinstalling Windows 7.
Your help would be very much appreciated.
Thanks a lot,
William

Hi,
I understand that the issue persists after registering the Windows Update files and removing incorrect Registry values that may exist. And before that
you have tried manually installation, disable antivirus, checksur but the update still cannot be installed.
Based on my experience, the update fail issue may occur when there are problems with winsxs folder, disk or Software Distribution folder. Please try the steps below and check the
result.
===========================================
1.
Rename Pending.xml
1). Open an elevated command prompt
2). At the command prompt type the following command:
takeown /f C:\Windows\winsxs\pending.xml
3). Rename c:\windows\winsxs\pending.xml using the following command:
Ren c:\windows\winsxs\pending.xml pending.old
2. Run Check disk (chkdsk) on the OS partition
1). Open an elevated command prompt
2). At the command prompt type the following command:
Chkdsk volume: /f /r
3. Rename the Software Distribution folder
To rename the Windows Update temporary SoftwareDistribution directory follow these steps:
1). Start an administrative command prompt.
2). Run the following commands hitting enter after each line:
Net stop wuauserv
cd %systemroot%
Ren SoftwareDistribution SoftwareDistribution.old
Net start wuauserv
3). Try to install updates again
Important The following issues occur when you do this:
• Updates that are currently downloaded but that have not yet been installed have to be downloaded again by using Windows Update or Microsoft Update.
• When you delete the Software Distribution folder, your download history is removed.
• If you currently receive updates from Microsoft Update and from Windows Update, you will have to re-select this option from the Windows Update Web site.
Note: If the issue is resolved and you can successfully download and install updates, you can safely delete the SoftwareDistribution.old directory to recover disk space.
Best regards,
Ruby Cheng
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Windows Updates Error Codes 80070308 and 80070643

Recently I have a problem with windows updates patches for this month (June 2014). I updated 10 computers (at office), 9 of them have either the error codes 80070308 and/or 80070643. I tried to disable the Symantec Endpoint, used the Microsoft
.NET Framework Repair Tool to fix the .Net Framework related error but still have failure. I can still finish all the failed patches by rescanning the PC than install them; however; I still have 40 PCs need to be patched. How do I prevent
the installation failure, all the PCs have no problem at last month. Any suggestion, many thanks.

Hi,
If your computer is having problems finding and installing operating system update, I suggest to
try the windows update troubleshooter.
To run a Windows Update troubleshooter:
http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter
An automatic troubleshooter is available that fixes some problems with Windows Update, and it might resolve this error for you
http://windows.microsoft.com/en-us/windows/troubleshoot-problems-installing-updates#1TC=windows-7
this error can appear when installing updates for Microsoft Office 2003,
to fix Windows update with error code:80070643:
http://windows.microsoft.com/en-us/windows/windows-update-error-80070643#1TC=windows-7
If your computers are in a domain environment and get updated by a WSUS server, I suggest to update the group policy with the command “gpupdate /force”.
Meanwhile, if it doesn’t help, please upload the Windowsupdate.log at: C:\Windows, this will give detail error information for further support.
Regards
Wade Liu
TechNet Community Support

Windows update error code 80072EFD and 80244018

An error occured while checking for new updates from my laptop
WindowsUpdate_80072EFD" "WindowsUpdate_dt000
WindowsUpdate_80244018" "WindowsUpdate_dt000
Help me with this error. i try to solve by using Microsoft TechNet but still cannot solve the problem, Also i try all the link that appear still cannot solve. Help me please..

Hi,
Have you tried this link?
Windows Update error 80072efd
http://windows.microsoft.com/en-in/windows/windows-update-error-80072efd#1TC=windows-7
And for error 80244018, in addition to solutions mentioned in the first reply, you can also try this, in start button, type "services.msc", enter, locate "Background intelligent Transfer Services" and "Windows Update", stop these two services, then
clear C:\Windows\SoftwareDistribution folder, restart the two services.
Regards
Yolanda Zhu
TechNet Community Support

Error while installing SQL Server 2008 R2 in Windows 7 SP1 machine

Hi Team,
Error while installing SQL Server 2008 R2 in Windows 7 SP1 machine. I can confirm this machine has .Net
Feature enabled and with Latest version.
TITLE: Microsoft SQL Server 2008 R2 Setup
The following error has occurred:
Error 25541.Failed to open XML file C:\Windows\Microsoft.NET\Framework\v2.0.50727\CONFIG\machine.config, system error: -2147024786
Regards,
Muthukumar.S.P.

Hi,
Can you follow workaround mentioned in below msdn blog
http://blogs.msdn.com/b/astebner/archive/2007/11/01/5826719.aspx
As per the blog you have to open the msi log files which must be located at
C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log
In MSI log files search for the error mentioned in blog. Below link will help you read setup log files
http://msdn.microsoft.com/en-gb/library/ms143702%28v=sql.105%29.aspx
PS: Please read links carefully and patiently and if it does not solves issue please post summary.txt file and details.txt file on skydrive for analysis
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

Windows Update Error 80080005 Windows 7 Client with WSUS 3.0 SP2 server

Hello everyone, I've looked around at other threads related to my issue, and I can't seem to find a correct answer.
I have a computer lab that I've recently installed a Windows 7 Enterprise image onto 35 Dell Optiplex computers (most are 380's, a few older 360's).
I created the image using MDT2010 and used one of the 380's as a reference.
All has been well for about a month or two but recently 6 computers are giving me Windows Update errors with the error code of 80080005.
I have a WSUS 3.0 SP2 server running, and all of my other computers seem to be getting their updates just fine. WSUS has the problematic computers in it's database, but it shows that they haven't checked in for "x" days.
I have Avast 4.8 Professional installed, I have OpenDNS configured to block bad websites, ____, etc. and I also use an Untangle server to prevent access to bad websites. I've ran a Malwarebytes' Anti-Malware scan on the affected computers, as well
as Windows Defender scan, and Windows Live OneCare scans, and all have found no malicious software.
I have also tried resetting the Windows update service as described here: http://support.microsoft.com/kb/971058 as well as a script that supposedly does the same thing, but also resets all previous
update events, but I can't find the script source right now (I had ran it last week, and it didn't work).
I'm currently running a SFC /Scannow on one of the computers, and now it has finished. It gives the error: Windows Resource Protection could not start the repair service. I'll have to google that next.
The last windows update that ran on the computer that I'm working on now was installed on 11-18-2010 and was a Windows Defender Update (KB915597 Def: 1.93.1985.0)
Previous to that was 11/9/2010 2 updates: KB977165 and KB981852.
I guess I'll have to look at all of the other machines to see if they have the same updates installed.
Anyway, has anyone else had this problem? I've seen vista home editions, and RC's but no real Windows 7 Pro+ RTM versions in business environments where updates were controlled by WSUS.
Thanks for any help that you can provide!
By the way, I only work at this location once a week (tuesdays, well thursdays too, but I'm next door to this building, but I have remote access), so bare with me on trying to fix things.

Ok, for the sake of completeness, I have completed the instructions given by Miya Yao.
After stopping the Windows Update Service (from an Admin Command prompt window), renaming the SoftwareDistribution folder to SDold, then starting the update service again, I still receive the same error when checking for updates.
The windows update log shows this (starting from about 4am) and I just reset the service at about 9:10, which you can see in the log.
2010-12-21 04:19:02:342 940 f20 Agent WARNING: WU client failed Searching for update with error 0x80080005
2010-12-21 04:19:02:342 940 cd4 AU >>## RESUMED ## AU: Search for updates [CallId = {8957B50F-46F1-44C4-A347-20D4C5E91D47}]
2010-12-21 04:19:02:342 940 cd4 AU # WARNING: Search callback failed, result = 0x80080005
2010-12-21 04:19:02:342 940 f20 Report CWERReporter finishing event handling. (00000000)
2010-12-21 04:19:02:342 940 cd4 AU # WARNING: Failed to find updates with error code 80080005
2010-12-21 04:19:02:342 940 cd4 AU #########
2010-12-21 04:19:02:342 940 cd4 AU ## END ## AU: Search for updates [CallId = {8957B50F-46F1-44C4-A347-20D4C5E91D47}]
2010-12-21 04:19:02:342 940 cd4 AU #############
2010-12-21 04:19:02:342 940 cd4 AU Successfully wrote event for AU health state:0
2010-12-21 04:19:02:342 940 cd4 AU AU setting next detection timeout to 2010-12-21 14:19:02
2010-12-21 04:19:02:342 940 cd4 AU Setting AU scheduled install time to 2010-12-22 08:00:00
2010-12-21 04:19:02:342 940 cd4 AU Successfully wrote event for AU health state:0
2010-12-21 04:19:02:342 940 cd4 AU Successfully wrote event for AU health state:0
2010-12-21 04:19:07:350 940 f20 Report REPORT EVENT: {A472759C-BEE7-4161-84E8-41F1C1D03AB4} 2010-12-21 04:19:02:342-0500 1 148 101 {61CA813A-7585-442E-A66B-B0D15CE6BDC0} 1 80080005 SelfUpdate Failure Software Synchronization Windows Update Client failed to detect with error 0x80080005.
2010-12-21 04:19:07:350 940 f20 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2010-12-21 04:19:07:350 940 f20 Report WER Report sent: 7.4.7600.226 0x80080005 61CA813A-7585-442E-A66B-B0D15CE6BDC0 Scan 101 Managed
2010-12-21 04:19:07:350 940 f20 Report CWERReporter finishing event handling. (00000000)
2010-12-21 04:24:22:767 940 f20 PT WARNING: Cached cookie has expired or new PID is available
2010-12-21 04:24:22:767 940 f20 PT Initializing simple targeting cookie, clientId = a6d6dc1c-d844-451c-8609-3879e6cacb33, target group = , DNS name = lab24.sja.local
2010-12-21 04:24:22:767 940 f20 PT Server URL = http://server2:8530/SimpleAuthWebService/SimpleAuth.asmx
2010-12-21 04:24:22:814 940 f20 Report Uploading 2 events using cached cookie, reporting URL = http://server2:8530/ReportingWebService/ReportingWebService.asmx
2010-12-21 04:24:22:814 940 f20 Report Reporter successfully uploaded 2 events.
2010-12-21 06:59:23:020 940 b4c AU AU was unable to detect updates for more than 48 hours
2010-12-21 06:59:28:027 940 c78 Report REPORT EVENT: {511B1C92-939C-4E97-A51B-50E75FCB7AEF} 2010-12-21 06:59:23:020-0500 1 149 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Failure Software Synchronization Unable to Connect: Windows is unable to connect to the automatic updates service and therefore cannot download and install updates according to the set schedule. Windows will continue to try to establish a connection.
2010-12-21 06:59:28:027 940 c78 Report CWERReporter finishing event handling. (00000000)
2010-12-21 09:02:03:476 940 2f4 AU Triggering AU detection through DetectNow API
2010-12-21 09:02:03:476 940 2f4 AU Triggering Online detection (interactive)
2010-12-21 09:02:03:476 940 b4c AU #############
2010-12-21 09:02:03:476 940 b4c AU ## START ## AU: Search for updates
2010-12-21 09:02:03:477 940 b4c AU #########
2010-12-21 09:02:03:488 940 b4c AU <<## SUBMITTED ## AU: Search for updates [CallId = {B65ACC67-ED84-45D4-9774-D0475806E74B}]
2010-12-21 09:02:03:488 940 e38 Agent *************
2010-12-21 09:02:03:488 940 e38 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2010-12-21 09:02:03:488 940 e38 Agent *********
2010-12-21 09:02:03:488 940 e38 Agent * Online = Yes; Ignore download priority = No
2010-12-21 09:02:03:488 940 e38 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2010-12-21 09:02:03:488 940 e38 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2010-12-21 09:02:03:488 940 e38 Agent * Search Scope = {Machine}
2010-12-21 09:02:03:488 940 e38 Setup Checking for agent SelfUpdate
2010-12-21 09:02:03:489 940 e38 Setup Client version: Core: 7.4.7600.226 Aux: 7.4.7600.226
2010-12-21 09:02:03:489 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2010-12-21 09:02:03:496 940 e38 Misc Microsoft signed: Yes
2010-12-21 09:02:06:071 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2010-12-21 09:02:06:078 940 e38 Misc Microsoft signed: Yes
2010-12-21 09:02:06:080 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2010-12-21 09:02:06:087 940 e38 Misc Microsoft signed: Yes
2010-12-21 09:02:06:100 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2010-12-21 09:02:06:107 940 e38 Misc Microsoft signed: Yes
2010-12-21 09:02:06:123 940 e38 Setup Determining whether a new setup handler needs to be downloaded
2010-12-21 09:02:06:123 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\Handler\WuSetupV.exe:
2010-12-21 09:02:06:129 940 e38 Misc Microsoft signed: Yes
2010-12-21 09:02:06:129 940 e38 Setup SelfUpdate handler update NOT required: Current version: 7.4.7600.226, required version: 7.4.7600.226
2010-12-21 09:02:06:129 940 e38 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.4.7600.226"
2010-12-21 09:02:15:386 940 b4c AU AU received policy change subscription event
2010-12-21 09:02:36:165 940 e38 Setup WARNING: Cbs StartSession, error = 0x80080005
2010-12-21 09:02:36:165 940 e38 Setup FATAL: Applicability evaluation for setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.4.7600.226" failed, error = 0x80080005
2010-12-21 09:02:36:165 940 e38 Setup FATAL: SelfUpdate check failed, err = 0x80080005
2010-12-21 09:02:36:165 940 e38 Agent * WARNING: Skipping scan, self-update check returned 0x80080005
2010-12-21 09:02:36:165 940 e38 Agent * WARNING: Exit code = 0x80080005
2010-12-21 09:02:36:165 940 e38 Agent *********
2010-12-21 09:02:36:165 940 e38 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2010-12-21 09:02:36:165 940 e38 Agent *************
2010-12-21 09:02:36:165 940 e38 Agent WARNING: WU client failed Searching for update with error 0x80080005
2010-12-21 09:02:36:165 940 e8c AU >>## RESUMED ## AU: Search for updates [CallId = {B65ACC67-ED84-45D4-9774-D0475806E74B}]
2010-12-21 09:02:36:165 940 e8c AU # WARNING: Search callback failed, result = 0x80080005
2010-12-21 09:02:36:165 940 e8c AU # WARNING: Failed to find updates with error code 80080005
2010-12-21 09:02:36:165 940 e8c AU #########
2010-12-21 09:02:36:165 940 e8c AU ## END ## AU: Search for updates [CallId = {B65ACC67-ED84-45D4-9774-D0475806E74B}]
2010-12-21 09:02:36:165 940 e8c AU #############
2010-12-21 09:02:36:165 940 e8c AU Successfully wrote event for AU health state:0
2010-12-21 09:02:36:165 940 e8c AU AU setting next detection timeout to 2010-12-21 19:02:36
2010-12-21 09:02:36:165 940 e8c AU Setting AU scheduled install time to 2010-12-22 08:00:00
2010-12-21 09:02:36:165 940 e8c AU Successfully wrote event for AU health state:0
2010-12-21 09:02:36:165 940 e8c AU Successfully wrote event for AU health state:0
2010-12-21 09:02:41:172 940 e38 Report REPORT EVENT: {678C2913-B3B3-4F14-9310-C2E2B1F3334A} 2010-12-21 09:02:36:165-0500 1 148 101 {61CA813A-7585-442E-A66B-B0D15CE6BDC0} 1 80080005 SelfUpdate Failure Software Synchronization Windows Update Client failed to detect with error 0x80080005.
2010-12-21 09:02:41:172 940 e38 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2010-12-21 09:02:41:172 940 e38 Report WER Report sent: 7.4.7600.226 0x80080005 61CA813A-7585-442E-A66B-B0D15CE6BDC0 Scan 101 Managed
2010-12-21 09:02:41:172 940 e38 Report CWERReporter finishing event handling. (00000000)
2010-12-21 09:06:07:779 940 b4c AU ########### AU: Uninitializing Automatic Updates ###########
2010-12-21 09:06:37:809 940 b4c Handler FATAL: UH: 0x80080005: StartSession failed in CCbs::IsCbsPending
2010-12-21 09:06:37:840 940 b4c Report CWERReporter finishing event handling. (00000000)
2010-12-21 09:06:37:872 940 b4c Service *********
2010-12-21 09:06:37:872 940 b4c Service ** END ** Service: Service exit [Exit code = 0x240001]
2010-12-21 09:06:37:872 940 b4c Service *************
2010-12-21 09:08:37:104 940 e84 Misc =========== Logging initialized (build: 7.4.7600.226, tz: -0500) ===========
2010-12-21 09:08:37:104 940 e84 Misc = Process: C:\Windows\system32\svchost.exe
2010-12-21 09:08:37:104 940 e84 Misc = Module: c:\windows\system32\wuaueng.dll
2010-12-21 09:08:37:104 940 e84 Service *************
2010-12-21 09:08:37:104 940 e84 Service ** START ** Service: Service startup
2010-12-21 09:08:37:104 940 e84 Service *********
2010-12-21 09:08:37:108 940 e84 Agent * WU client version 7.4.7600.226
2010-12-21 09:08:37:108 940 e84 Agent * Base directory: C:\Windows\SoftwareDistribution
2010-12-21 09:08:37:108 940 e84 Agent * Access type: No proxy
2010-12-21 09:08:37:108 940 e84 Agent * Network state: Connected
2010-12-21 09:08:37:453 940 e84 DtaStor Default service for AU is {00000000-0000-0000-0000-000000000000}
2010-12-21 09:08:37:462 940 e84 DtaStor Default service for AU is {9482F4B4-E343-43B6-B170-9A65BC822C77}
2010-12-21 09:08:37:464 940 e84 Agent WARNING: failed to access the auth cab, fatal error 0x80070003
2010-12-21 09:08:37:464 940 e84 Agent WARNING: Invalid service in the backup data store; cleaning up
2010-12-21 09:08:37:465 940 e84 Agent WARNING: Failed to add and register service 7971f918-a847-4430-9279-4a52d1efe18d to the data store 0x80240031
2010-12-21 09:08:37:465 940 e84 Agent WARNING: Default Service Recovery: Attempting to add pending registration for service 7971f918-a847-4430-9279-4a52d1efe18d to the data store
2010-12-21 09:09:22:474 940 e84 Report CWERReporter::Init succeeded
2010-12-21 09:09:22:474 940 e84 Agent *********** Agent: Initializing Windows Update Agent ***********
2010-12-21 09:09:22:475 940 e84 Agent *********** Agent: Initializing global settings cache ***********
2010-12-21 09:09:22:475 940 e84 Agent * WSUS server: http://server2:8530
2010-12-21 09:09:22:475 940 e84 Agent * WSUS status server: http://server2:8530
2010-12-21 09:09:22:475 940 e84 Agent * Target group: (Unassigned Computers)
2010-12-21 09:09:22:475 940 e84 Agent * Windows Update access disabled: No
2010-12-21 09:09:22:475 940 e84 DnldMgr Download manager restoring 0 downloads
2010-12-21 09:09:22:476 940 e84 AU ########### AU: Initializing Automatic Updates ###########
2010-12-21 09:09:22:477 940 e84 AU # WSUS server: http://server2:8530
2010-12-21 09:09:22:477 940 e84 AU # Detection frequency: 22
2010-12-21 09:09:22:477 940 e84 AU # Approval type: Scheduled (Policy)
2010-12-21 09:09:22:477 940 e84 AU # Scheduled install day/time: Every day at 3:00
2010-12-21 09:09:22:477 940 e84 AU # Auto-install minor updates: Yes (Policy)
2010-12-21 09:09:22:478 940 e84 AU Setting AU scheduled install time to 2010-12-22 08:00:00
2010-12-21 09:09:22:751 940 e84 Report *********** Report: Initializing static reporting data ***********
2010-12-21 09:09:22:751 940 e84 Report * OS Version = 6.1.7600.0.0.65792
2010-12-21 09:09:22:751 940 e84 Report * OS Product Type = 0x00000004
2010-12-21 09:09:22:772 940 e84 Report * Computer Brand = Dell Inc.
2010-12-21 09:09:22:772 940 e84 Report * Computer Model = OptiPlex 380
2010-12-21 09:09:22:775 940 e84 Report * Bios Revision = A01
2010-12-21 09:09:22:775 940 e84 Report * Bios Name = Phoenix ROM BIOS PLUS Version 1.10 A01
2010-12-21 09:09:22:775 940 e84 Report * Bios Release Date = 2010-03-11T00:00:00
2010-12-21 09:09:22:775 940 e84 Report * Locale ID = 1033
2010-12-21 09:09:22:777 940 e84 AU Successfully wrote event for AU health state:0
2010-12-21 09:09:22:777 940 e84 AU Initializing featured updates
2010-12-21 09:09:22:777 940 e84 AU Found 0 cached featured updates
2010-12-21 09:09:22:777 940 e84 AU Successfully wrote event for AU health state:0
2010-12-21 09:09:22:778 940 e84 AU Successfully wrote event for AU health state:0
2010-12-21 09:09:22:778 940 e84 AU AU finished delayed initialization
2010-12-21 09:09:27:781 940 36c Report CWERReporter finishing event handling. (00000000)
2010-12-21 09:10:20:421 940 bf0 AU Triggering AU detection through DetectNow API
2010-12-21 09:10:20:422 940 bf0 AU Triggering Online detection (interactive)
2010-12-21 09:10:20:422 940 e84 AU #############
2010-12-21 09:10:20:422 940 e84 AU ## START ## AU: Search for updates
2010-12-21 09:10:20:422 940 e84 AU #########
2010-12-21 09:10:20:425 940 e84 AU <<## SUBMITTED ## AU: Search for updates [CallId = {F1E8D669-5A48-4C25-832F-4A5ABD80270F}]
2010-12-21 09:10:20:425 940 36c Agent *************
2010-12-21 09:10:20:425 940 36c Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2010-12-21 09:10:20:425 940 36c Agent *********
2010-12-21 09:10:20:425 940 36c Agent * Online = Yes; Ignore download priority = No
2010-12-21 09:10:20:425 940 36c Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2010-12-21 09:10:20:425 940 36c Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2010-12-21 09:10:20:425 940 36c Agent * Search Scope = {Machine}
2010-12-21 09:10:20:425 940 36c Setup Checking for agent SelfUpdate
2010-12-21 09:10:20:426 940 36c Setup Client version: Core: 7.4.7600.226 Aux: 7.4.7600.226
2010-12-21 09:10:22:715 940 36c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2010-12-21 09:10:22:725 940 36c Misc Microsoft signed: Yes
2010-12-21 09:10:22:745 940 36c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2010-12-21 09:10:22:750 940 36c Misc Microsoft signed: Yes
2010-12-21 09:10:22:765 940 36c Setup Determining whether a new setup handler needs to be downloaded
2010-12-21 09:10:22:765 940 36c Setup SelfUpdate handler is not found. It will be downloaded
2010-12-21 09:10:22:765 940 36c Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.4.7600.226"
2010-12-21 09:10:52:778 940 36c Setup WARNING: Cbs StartSession, error = 0x80080005
2010-12-21 09:10:52:778 940 36c Setup FATAL: Applicability evaluation for setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.4.7600.226" failed, error = 0x80080005
2010-12-21 09:10:52:778 940 36c Setup FATAL: SelfUpdate check failed, err = 0x80080005
2010-12-21 09:10:52:779 940 36c Agent * WARNING: Skipping scan, self-update check returned 0x80080005
2010-12-21 09:10:52:779 940 36c Agent * WARNING: Exit code = 0x80080005
2010-12-21 09:10:52:779 940 36c Agent *********
2010-12-21 09:10:52:779 940 36c Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2010-12-21 09:10:52:779 940 36c Agent *************
2010-12-21 09:10:52:779 940 36c Agent WARNING: WU client failed Searching for update with error 0x80080005
2010-12-21 09:10:52:779 940 ba0 AU >>## RESUMED ## AU: Search for updates [CallId = {F1E8D669-5A48-4C25-832F-4A5ABD80270F}]
2010-12-21 09:10:52:780 940 ba0 AU # WARNING: Search callback failed, result = 0x80080005
2010-12-21 09:10:52:780 940 ba0 AU # WARNING: Failed to find updates with error code 80080005
2010-12-21 09:10:52:780 940 ba0 AU #########
2010-12-21 09:10:52:780 940 ba0 AU ## END ## AU: Search for updates [CallId = {F1E8D669-5A48-4C25-832F-4A5ABD80270F}]
2010-12-21 09:10:52:780 940 ba0 AU #############
2010-12-21 09:10:52:783 940 ba0 AU Successfully wrote event for AU health state:0
2010-12-21 09:10:52:783 940 ba0 AU AU setting next detection timeout to 2010-12-21 19:10:52
2010-12-21 09:10:52:783 940 ba0 AU Setting AU scheduled install time to 2010-12-22 08:00:00
2010-12-21 09:10:52:783 940 ba0 AU Successfully wrote event for AU health state:0
2010-12-21 09:10:52:784 940 ba0 AU Successfully wrote event for AU health state:0

Attempted to perform an unauthorized operation error on windows 8.1 while installing SQL server 2008

Hi,
I am getting the error "Attempted to perform an unauthorized operation" on windows 8.1 while installing
SQL server 2008.
The specific error is The error is Attempted to perform an unauthorized operation."
at stepSqlBrowserConfigAction_install_ConfigNonRC_Cpu32 .
I have tried everything from copying to the C drive. I am the admin on the machine. I also checked access in registry. It already has acesss to HKLM\System\CurrentControlSet\Control\WMI\security
Can someone comment on how to resolve this issue. I also tried NT
AUTHORITY\SYSTEM but getting the same error.
Any help would be appreciated.

Hello,
Please note that SQL Server 2008 requires Service Pack 3 (SP3) to make it compatible with
Windows 8.1. Please perform an slipstream installation of SQL Server 2008 + SP3:
http://support.microsoft.com/kb/955392
If it fails again, please share with us the Summary.txt log file and the details.txt log file. The following article
may help you locate those files on disk::
http://msdn.microsoft.com/en-us/library/ms143702(v=sql.100).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Windows Update stuck on downloading on Server 2012

Hi,
Using VMWare Workstation 9, I created new virtual machine where I installed Windows Server 2012 Standard edition from MDSN disk en_windows_server_2012_x64_dvd_915478.iso In the Server 2012 virtual machine, when I go to check for updates it says
there are important updates available so I click on Install Updates. It then just gets stuck on downloading updates for hours and nothing ever happens. Stuck at 0 KB total, 0% complete. I am able to access web pages using Internet Explorer
with no problem so the machine does appear to have connectivity to the Internet. If I go to help, click on "What can I do if I'm having problems installing updates?" and click on "Tab or click to open the Windows Update troubleshooter"
it says "Windows Online Troubleshooting Service is not enabled for this version of Windows." Any suggestions or ideas?
Thanks,
Greg

I had a similar problem with a guest Windows 2012 R2 running on a Hyper-V host. I went to the network adapter in device manager in the guest and I disabled the "Large Send Offload Version 2 (IPv4)" option. Why? Well, this was also an issue previously when
guesting Windows 2008 where the symptom was an error 80072ee2 when retrieving updates. See this post
http://blog.ronnypot.nl/?p=310 for details. Anyway, I tried this and it worked for me. Hung before the change, worked after.

Windows update error Code 80072EF3

Greetings!
I have a Dell PowerEdge T320 that is experiencing this issue: Windows update error Code 80072EF3
I followed instructions in article
http://support.microsoft.com/kb/947821/en-usand ran the DISM.exe with the offline source (my DVD drive) to avoid using the windows update component that appears to be damaged. Command completed, but no effect on the error.
Last successful update session was 7/8/2014
Security Update for Windows Server 2012 (KB2922229) cancelled. Tried to install manually. Not applicable.
Update for Windows Server 2012 (KB2811660) Failed. When running the manual download get the message it is already installed. Same for KB2855336
Any help appreciated.
Below is the detailed update history.
This link contains the log for the DISM repair tool:
https://www.dropbox.com/s/3aufjud0wd0n53n/CBS.zip

Hi,
Please re-run Windows update and then provide us the windowsupdate.log file for check. It is under C:\Windows.
Thanks.
Jeremy Wu
TechNet Community Support

Windows update error 80072EFD

Hi,
I have a 2 month old P750 laptop, after needing to do a restore from a drive back up, I now get the error above.
I then decided to do a toshiba recovery with a clean install and again get the same result of windows update not being able to connect to the server.
I have tried everything I can find for this error including checking the proxy settings for WU, reseting the proxy settings via CMD prompt.
I did notice something interesting while checking validation using the microsoft MGA diagnostic tool, where windows was listed as genuime but of note were some interesting reports like:
Validation code : 0
LegitCheckControl : N/A, hr=0x80070002
signed : N/A, hr=0x80070002
My understanding is the 0x80070002 means it couldn't connect the same as WU or that files are missing.
I have rebuilt the softwaredistribution folders as recommended, disabled all firewalls, removed antivirus / malware software but still no luck.
It seems funny how the same thing happens even after a clean toshiba disk recovery.
Any suggestions?
BL262000

Hello
If you check Google and error code 80072EFD you will find numerous pages where you can find explanations why should be done about that.
This is typical Microsoft issue and solution must be searched by Microsoft.
Have you checked
http://windows.microsoft.com/en-GB/windows-vista/Windows-Update-error-80072efd or http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/windows-update-error-80072efd/398546d2-6b6d-47a0-b075-82d815fa9a8f ?

Windows 8.1 Update VLSC ISO windows update error

I have a downloaded version of Windows 8.1 Update 1 from the VLSC and Windows Update fails after a clean install. I've installed it on different systems and multiple fail with the same error (80072EFE). The weird thing is that it works fine against our
WSUS server just not checking online. There isn't anything blocking the connection to Windows Update so not sure what is going on.

Hi,
If you receive Windows Update error 80072efe or 80072f76 while checking for updates, it might be caused by a connection interruption between your computer and the Windows Update servers. You can run Windows Update Troubleshooter that will automatically find
and fix some common problems with Windows update.
Windows Update Troubleshooter:
http://go.microsoft.com/?linkid=9830262
In addition, please check your security application setting, such as firewall.
Roger Lu
TechNet Community Support

Possiblely a bug - windows update error when using NAT between Hyper-V Virtual Ethernet Adapter

I'm using SCVMM managing my Hyper-V machine.
I have three physical network adapter on my hyper-v host as below:
I'm using SCVMM 2012 SP1 to create two virtual network adapter base on each Realtek controller, Bridge the traffic from the physical adapter, NAT the traffic from the internal virtual adapter to the internet facing virtual adater.
I can access the internet but i got the windows update error as below
If i NAT the internal virtual adapter traffic to the WIFI physical internal facing adapter, windows update is fine.
I'm using my hyper-v server windows NAT feature.
I did google a round, it looks like something wrong when you NAT the two virtual network adatper..
if anyone here can help, that's would be much appreciated.
2013-03-27   18:38:25:627   868   ba4   AU   ## START ## AU: Search for updates
2013-03-27   18:38:25:627   868   ba4   AU   #########
2013-03-27   18:38:25:627   868   ba4   AU   <<## SUBMITTED ## AU: Search for updates [CallId = {F6806137-9A32-4476-AF23-38B11881056E} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
2013-03-27   18:38:25:627   868   934   Agent   *************
2013-03-27   18:38:25:627   868   934   Agent   ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-03-27   18:38:25:627   868   934   Agent   *********
2013-03-27   18:38:25:627   868   934   Agent      * Online = Yes; Ignore download priority = No
2013-03-27   18:38:25:627   868   934   Agent      * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation'
or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2013-03-27   18:38:25:627   868   934   Agent      * ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service
2013-03-27   18:38:25:627   868   934   Agent      * Search Scope = {Machine & All Users}
2013-03-27   18:38:25:627   868   934   Agent      * Caller SID for Applicability: S-1-5-21-759915917-1653667288-1560420946-1106
2013-03-27   18:38:25:627   868   934   EP   Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL: "http://ds.download.windowsupdate.com/v10/2/microsoftupdate/redir/muauth.cab"
2013-03-27   18:38:25:627   868   934   EP   Got 7971F918-A847-4430-9279-4A52D1EFE18D redir Client/Server URL: "https://fe1.update.microsoft.com/v6/ClientWebService/client.asmx"
2013-03-27   18:38:25:627   868   934   Setup   Checking for agent SelfUpdate
2013-03-27   18:38:25:627   868   934   Setup   Client version: Core: 7.8.9200.16465 Aux: 7.8.9200.16451
2013-03-27   18:38:25:799   868   934   EP   Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SelfUpdate URL: "http://fe1.update.microsoft.com/v10/2/windowsupdate/selfupdate"
2013-03-27   18:38:25:799   868   934   Misc   Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2013-03-27   18:38:25:815   868   934   Misc   Microsoft signed: Yes
2013-03-27   18:38:25:815   868   934   Misc   Infrastructure signed: Yes
2013-03-27   18:38:26:002   868   934   Misc   Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2013-03-27   18:38:26:002   868   934   Misc   Microsoft signed: Yes
2013-03-27   18:38:26:002   868   934   Misc   Infrastructure signed: Yes
2013-03-27   18:38:26:002   868   934   Setup   Skipping SelfUpdate check based on the /SKIP directive in wuident
2013-03-27   18:38:26:002   868   934   Setup   SelfUpdate check completed. SelfUpdate is NOT required.
2013-03-27   18:38:26:440   868   934   PT   +++++++++++ PT: Synchronizing server updates +++++++++++
2013-03-27   18:38:26:440   868   934   PT      + ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, Server URL = https://fe1.update.microsoft.com/v6/ClientWebService/client.asmx
2013-03-27   18:38:28:846   868   934   WS   WARNING: Nws Failure: errorCode=0x803d0014
2013-03-27   18:38:28:846   868   934   WS   WARNING: Original error code: 0x80072efe
2013-03-27   18:38:28:846   868   934   WS   WARNING: There was an error communicating with the endpoint at 'https://fe1.update.microsoft.com/v6/ClientWebService/client.asmx'.
2013-03-27   18:38:28:846   868   934   WS   WARNING: There was an error receiving the HTTP reply.
2013-03-27   18:38:28:846   868   934   WS   WARNING: The connection with the remote endpoint was terminated.
2013-03-27   18:38:28:846   868   934   WS   WARNING: The connection with the server was terminated abnormally
2013-03-27   18:38:28:846   868   934   WS   WARNING: Web service call failed with hr = 80240440.
2013-03-27   18:38:28:846   868   934   WS   WARNING: Current service auth scheme='None'.
2013-03-27   18:38:28:846   868   934   WS   WARNING: Proxy List used: '(null)', Bypass List used: '(null)', Last Proxy used: '(null)', Last auth Schemes used: 'None'.
2013-03-27   18:38:28:846   868   934   WS   FATAL: OnCallFailure(hrCall, m_error) failed with hr=0x80240440
2013-03-27   18:38:28:846   868   934   PT   WARNING: PTError: 0x80240440
2013-03-27   18:38:28:846   868   934   PT   WARNING: SyncUpdates_WithRecovery failed.: 0x80240440
2013-03-27   18:38:28:846   868   934   PT   WARNING: Sync of Updates: 0x80240440
2013-03-27   18:38:28:846   868   934   PT   WARNING: SyncServerUpdatesInternal failed: 0x80240440
2013-03-27   18:38:28:846   868   934   Agent      * WARNING: Failed to synchronize, error = 0x80240440
2013-03-27   18:38:28:862   868   934   Agent      * WARNING: Exit code = 0x80240440
2013-03-27   18:38:28:862   868   934   Agent   *********
2013-03-27   18:38:28:862   868   934   Agent   ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-03-27   18:38:28:862   868   934   Agent   *************
2013-03-27   18:38:28:862   868   934   Agent   WARNING: WU client failed Searching for update with error 0x80240440
2013-03-27   18:38:28:862   868   598   AU   >>## RESUMED ## AU: Search for updates [CallId = {F6806137-9A32-4476-AF23-38B11881056E} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
2013-03-27   18:38:28:862   868   598   AU      # WARNING: Search callback failed, result = 0x80240440
2013-03-27   18:38:28:862   868   598   AU   #########
2013-03-27   18:38:28:862   868   598   AU   ## END ## AU: Search for updates [CallId = {F6806137-9A32-4476-AF23-38B11881056E} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
2013-03-27   18:38:28:862   868   598   AU   #############
2013-03-27   18:38:28:862   868   598   AU   All AU searches complete.
2013-03-27   18:38:28:862   868   598   AU      # WARNING: Failed to find updates with error code 80240440
2013-03-27   18:38:28:862   868   598   AU   AU setting next detection timeout to 2013-03-27 12:38:28
Ricky

some more interesting article i've found so far
http://practicalkungfu.net/2013/03/11/windows-update-error-code-8024402f-on-hyper-v-guests/
http://faultbucket.ca/2012/08/windows-server-2012-windows-update-error-0x80240440/
http://social.technet.microsoft.com/Forums/en-US/winserver8gen/thread/80548a4e-6c68-4700-a37b-9e22890bd8af
Ricky

Windows Update Error 8024000E

so i have read the other forums about this error.
So i cant update the windows.
i have tried to go to cmd and did systemcheck.
i have no idea what to do.'
my fathers laptop didnt work either to update so i formated hes computer and it worked.
i dont have a laptop just a normal computer.
also i can upload my cbs log and im using windows 7 professional 64 bit

Windows Update Error 8024000E
This error is a SUS_E_XML_INVALID error on the update being processed.
You've posted in the SCE forum.... is this error coming from a WSUS server configured as part of System Center Essentials?
The nature of your post suggests this is not a business environment, but a home system trying to get updates via Windows Update.
Do these Windows 7 systems have Service Pack 1 installed?
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Windows Update Error 80244022 on windows Server 2008 R2

Similar Messages

Maybe you are looking for