Windows Update error 80246003 Server 2012 / 2012 R2

Hi All,
I'm running into a problem trying to apply an update from WSUS 3.2.7600.226. Other updates have succeeded OK but I'm left with this one failing on more than one server. All the other updates seem fine but once this update fails windows update appears broken
and will no longer update anything. 
The update is KB2538243. I've attached the error to this post and also included some logs below. 
So far I've removed the servers from wsus. Stopped the wuauserv service and deleted the "software distribution" folder. used gpupdate to detect them again. Nothing seems to work. The patches have been applied to wsus to allow updating of W8 and
2012. 
reportingevent.log
{C8746CA9-B4D1-444C-A328-9DD4C55D5B7F} 2014-04-10 14:12:52:638+0100
1 156 [AGENT_STATUS_30]
101 {00000000-0000-0000-0000-000000000000}
0 0
AutomaticUpdatesWuApp Success
Pre-Deployment Check Reporting client status.
{D7B6F804-F14F-496A-8441-AB3C208E846F} 2014-04-10 14:12:53:388+0100
1 161 [AGENT_DOWNLOAD_FAILED]
101 {729A0DCB-DF9E-4D02-B603-ED1AEE074428}
103 80246003
AutomaticUpdatesWuApp Failure
Content Download Error: Download failed.
{0879984E-30B9-4D9B-AF57-BC1C7D79D2C5} 2014-04-10 15:15:53:126+0100
1 147 [AGENT_DETECTION_FINISHED]
101 {00000000-0000-0000-0000-000000000000}
0 0
AutomaticUpdatesWuApp Success
Software Synchronization Windows Update Client successfully detected 1 updates.
{7CE18B21-4171-4C2A-9721-10B3A0065E1D} 2014-04-10 15:15:53:126+0100
1 156 [AGENT_STATUS_30]
101 {00000000-0000-0000-0000-000000000000}
0 0
AutomaticUpdatesWuApp Success
Pre-Deployment Check Reporting client status.
{606FD01F-1067-42BE-B79F-70FA7D4E786C} 2014-04-10 15:15:53:954+0100
1 161 [AGENT_DOWNLOAD_FAILED]
101 {729A0DCB-DF9E-4D02-B603-ED1AEE074428}
103 80246003
AutomaticUpdatesWuApp Failure
Content Download Error: Download failed.
{F2B3147F-9BA2-469C-94E7-2AE5ABCED6D9} 2014-04-10 15:15:56:798+0100
1 147 [AGENT_DETECTION_FINISHED]
101 {00000000-0000-0000-0000-000000000000}
0 0
AutomaticUpdatesWuApp Success
Software Synchronization Windows Update Client successfully detected 1 updates.
{4C24E5FF-754E-4FDE-A94A-EA3FC05421E9} 2014-04-10 15:15:56:798+0100
1 156 [AGENT_STATUS_30]
101 {00000000-0000-0000-0000-000000000000}
0 0
AutomaticUpdatesWuApp Success
Pre-Deployment Check Reporting client status.
{8CA4C3D4-6863-4024-8B0C-64B4E3D67E82} 2014-04-10 15:15:57:767+0100
1 161 [AGENT_DOWNLOAD_FAILED]
101 {729A0DCB-DF9E-4D02-B603-ED1AEE074428}
103 80246003
AutomaticUpdates Failure
Content Download Error: Download failed.
{587487B1-5F5C-4020-88D8-D455DBFF3600} 2014-04-10 15:18:32:569+0100
1 147 [AGENT_DETECTION_FINISHED]
101 {00000000-0000-0000-0000-000000000000}
0 0
AutomaticUpdatesWuApp Success
Software Synchronization Windows Update Client successfully detected 1 updates.
{AA9B99F1-B716-43A8-A5B0-F500D139202B} 2014-04-10 15:18:32:569+0100
1 156 [AGENT_STATUS_30]
101 {00000000-0000-0000-0000-000000000000}
0 0
AutomaticUpdatesWuApp Success
Pre-Deployment Check Reporting client status.
{82AF887E-C294-41C6-95EF-69349940BEA8} 2014-04-10 15:18:33:491+0100
1 161 [AGENT_DOWNLOAD_FAILED]
101 {729A0DCB-DF9E-4D02-B603-ED1AEE074428}
103 80246003
AutomaticUpdates Failure
Content Download Error: Download failed.
{38E21A73-07B7-45B0-83BF-E6647E19AFCF} 2014-04-10 15:18:35:913+0100
1 147 [AGENT_DETECTION_FINISHED]
101 {00000000-0000-0000-0000-000000000000}
0 0
AutomaticUpdatesWuApp Success
Software Synchronization Windows Update Client successfully detected 1 updates.
{1D60C4A7-A5E8-404F-9D03-6468C5C35A05} 2014-04-10 15:18:35:913+0100
1 156 [AGENT_STATUS_30]
101 {00000000-0000-0000-0000-000000000000}
0 0
AutomaticUpdatesWuApp Success
Pre-Deployment Check Reporting client status.
{762EE1E6-106F-4AFF-885B-04B91F472AA7} 2014-04-10 15:18:36:866+0100
1 161 [AGENT_DOWNLOAD_FAILED]
101 {729A0DCB-DF9E-4D02-B603-ED1AEE074428}
103 80246003
AutomaticUpdatesWuApp Failure
Content Download Error: Download failed.
windowsupdate.log
2014-04-10 15:18:36:569
704 3c0
AU ## START ##  AU: Download updates
2014-04-10 15:18:36:569
704 3c0
AU #########
2014-04-10 15:18:36:569
704 3c0
AU  # Found no download approved updates.
2014-04-10 15:18:36:569
704 3c0
AU #########
2014-04-10 15:18:36:569
704 3c0
AU ##  END  ##  AU: Download updates
2014-04-10 15:18:36:569
704 3c0
AU #############
2014-04-10 15:18:36:804
704 a18
DnldMgr BITS job {61E23E31-6C46-4638-8145-8CDB273C62E1} completed successfully
2014-04-10 15:18:36:804
704 a18
DnldMgr CUpdateDownloadJob::GetNetworkCostSwitch() Neither unrestricted or restricted network cost used, so using current cost
2014-04-10 15:18:36:804
704 a18
IdleTmr WU operation (DownloadManagerDownloadJob, operation # 3451) stopped; does use network; is not at background priority; will NOT start idle timer (task did not previously stop it
2014-04-10 15:18:36:804
704 a18
IdleTmr Decremented PDC RefCount for Network to 0
2014-04-10 15:18:36:804
704 a18
IdleTmr Decremented idle timer priority operation counter to 2
2014-04-10 15:18:36:819
704 a18
Misc Validating signature for C:\Windows\SoftwareDistribution\Download\49b9fcd994be15e2906948beef673948\470640aa4bb7db8e69196b5edb0010933569e98d:
2014-04-10 15:18:36:851
704 a18
Misc Microsoft signed: Yes
2014-04-10 15:18:36:851
704 a18
DnldMgr  Download job bytes total = 4479832, bytes transferred = 4479832
2014-04-10 15:18:36:851
704 678
DnldMgr ***********  DnldMgr: New download job [UpdateId = {542F36E8-38E5-49AE-9AEE-F35C6FF7107D}.103]  ***********
2014-04-10 15:18:36:866
704 678
DnldMgr WARNING: Update validation failed, error 80246003.
2014-04-10 15:18:36:866
704 678
DnldMgr FATAL: DM:CAgentDownloadManager::DownloadUpdate: pDownloadJob->Init failed with 0x80246003.
2014-04-10 15:18:36:866
704 678
DnldMgr WARNING: Got error (hr = 80246003) starting update 0 in call 20. Notifying call.
2014-04-10 15:18:36:866
704 678
DnldMgr Error 0x80246003 occurred while downloading update; notifying dependent calls.
2014-04-10 15:18:36:866
704 26c
AU >>##  RESUMED  ## AU: Download update [UpdateId = {729A0DCB-DF9E-4D02-B603-ED1AEE074428}]
2014-04-10 15:18:36:866
704 26c
AU  # WARNING: Download failed, error = 0x80246003
2014-04-10 15:18:36:866
704 678
DnldMgr *********
2014-04-10 15:18:36:866
704 678
DnldMgr **  END  **  DnldMgr: Download Call Complete [Call 20 for caller AutomaticUpdates has completed; signaling completion.]
2014-04-10 15:18:36:866
704 678
DnldMgr *************
2014-04-10 15:18:36:866
704 26c
AU Download call completed, hr = 0x80246003
2014-04-10 15:18:36:866
704 26c
AU #########
2014-04-10 15:18:36:866
704 26c
AU ##  END  ##  AU: Download updates
2014-04-10 15:18:36:866
704 26c
AU #############
2014-04-10 15:18:36:866
704 678
DnldMgr FATAL: DM:CAgentDownloadManager::LoadUpdateMetadataFromDatastore: GetUpdates failed with 0x80248007.
2014-04-10 15:18:36:866
704 678
Report REPORT EVENT: {587487B1-5F5C-4020-88D8-D455DBFF3600}
2014-04-10 15:18:32:569+0100 1
147 [AGENT_DETECTION_FINISHED] 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdatesWuApp
Success Software Synchronization
Windows Update Client successfully detected 1 updates.
2014-04-10 15:18:36:866
704 678
Report REPORT EVENT: {AA9B99F1-B716-43A8-A5B0-F500D139202B}
2014-04-10 15:18:32:569+0100 1
156 [AGENT_STATUS_30] 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdatesWuApp
Success Pre-Deployment Check
Reporting client status.
2014-04-10 15:18:36:866
704 678
Report REPORT EVENT: {82AF887E-C294-41C6-95EF-69349940BEA8}
2014-04-10 15:18:33:491+0100 1
161 [AGENT_DOWNLOAD_FAILED] 101
{729A0DCB-DF9E-4D02-B603-ED1AEE074428}
103 80246003
AutomaticUpdates Failure
Content Download Error: Download failed.
2014-04-10 15:18:36:866
704 678
Report REPORT EVENT: {38E21A73-07B7-45B0-83BF-E6647E19AFCF}
2014-04-10 15:18:35:913+0100 1
147 [AGENT_DETECTION_FINISHED] 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdatesWuApp
Success Software Synchronization
Windows Update Client successfully detected 1 updates.
2014-04-10 15:18:36:866
704 678
Report REPORT EVENT: {1D60C4A7-A5E8-404F-9D03-6468C5C35A05}
2014-04-10 15:18:35:913+0100 1
156 [AGENT_STATUS_30] 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdatesWuApp
Success Pre-Deployment Check
Reporting client status.
2014-04-10 15:18:36:866
704 26c
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-04-10 15:18:36:866
704 26c
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-04-10 15:18:36:866
704 678
Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2014-04-10 15:18:36:866
704 678
Report WER Report sent: 7.9.9600.16422 0x80246003(0) 729A0DCB-DF9E-4D02-B603-ED1AEE074428 Download 101 Managed
2014-04-10 15:18:36:866
704 678
Report CWERReporter finishing event handling. (00000000)
2014-04-10 15:18:36:882
704 26c
IdleTmr Decremented idle timer priority operation counter to 1
2014-04-10 15:18:36:882
704 308
AU WARNING: GetUpdateMetadata2 failed, error = 0x80248007
2014-04-10 15:18:36:882
704 308
AU WARNING: GetUpdateMetadata2 failed, error = 0x80248007
2014-04-10 15:18:38:585
704 208
AU BeginInteractiveInstall invoked for Install
2014-04-10 15:18:38:585
704 208
AU Auto-approved 0 update(s) for install (for Ux), installType=0
2014-04-10 15:18:38:585
704 208
AU WARNING: BeginInteractiveInstall failed, error = 0x8024000C
2014-04-10 15:18:38:585
704 870
AU AU received handle event
2014-04-10 15:18:38:585
704 870
AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
2014-04-10 15:18:38:585
704 870
AU Triggering Offline detection (non-interactive)
2014-04-10 15:18:38:585
704 870
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-04-10 15:18:38:585
704 870
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-04-10 15:18:38:585
704 870
AU #############
2014-04-10 15:18:38:585
704 870
AU ## START ##  AU: Search for updates
2014-04-10 15:18:38:585
704 870
AU #########
2014-04-10 15:18:38:585
704 870
IdleTmr WU operation (CSearchCall::Init ID 21) started; operation # 4008; does not use network; is at background priority
2014-04-10 15:18:38:585
704 870
IdleTmr Incremented PDC RefCount for System to 1
2014-04-10 15:18:38:585
704 870
Agent *** START ***  Queueing Finding updates [CallerId = AutomaticUpdates  Id = 21]
2014-04-10 15:18:38:585
704 870
AU <<## SUBMITTED ## AU: Search for updates  [CallId = {46E5E308-CC0D-49A1-A033-DA0A05BA7E9E} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2014-04-10 15:18:38:585
704 654
Agent ***  END  ***  Queueing Finding updates [CallerId = AutomaticUpdates  Id = 21]
2014-04-10 15:18:38:585
704 654
Agent *************
2014-04-10 15:18:38:585
704 654
Agent ** START **  Agent: Finding updates [CallerId = AutomaticUpdates  Id = 21]
2014-04-10 15:18:38:585
704 654
Agent *********
2014-04-10 15:18:38:585
704 654
Agent  * Online = No; Ignore download priority = No
2014-04-10 15:18:38:585
704 654
Agent  * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-04-10 15:18:38:585
704 654
Agent  * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-04-10 15:18:38:585
704 654
Agent  * Search Scope = {Machine & All Users}
2014-04-10 15:18:38:585
704 654
Agent  * Caller SID for Applicability: S-1-5-18
2014-04-10 15:18:38:929
704 654
Agent  * Found 0 updates and 66 categories in search; evaluated appl. rules of 287 out of 594 deployed entities
2014-04-10 15:18:38:929
704 654
Agent *********
2014-04-10 15:18:38:929
704 654
Agent **  END  **  Agent: Finding updates [CallerId = AutomaticUpdates  Id = 21]
2014-04-10 15:18:38:929
704 654
Agent *************
2014-04-10 15:18:38:929
704 654
IdleTmr WU operation (CSearchCall::Init ID 21, operation # 4008) stopped; does not use network; is at background priority
2014-04-10 15:18:38:929
704 654
IdleTmr Decremented PDC RefCount for System to 0
2014-04-10 15:18:38:929
704 26c
AU >>##  RESUMED  ## AU: Search for updates [CallId = {46E5E308-CC0D-49A1-A033-DA0A05BA7E9E} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2014-04-10 15:18:38:929
704 26c
AU  # 0 updates detected
2014-04-10 15:18:38:929
704 26c
AU #########
2014-04-10 15:18:38:929
704 26c
AU ##  END  ##  AU: Search for updates  [CallId = {46E5E308-CC0D-49A1-A033-DA0A05BA7E9E} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2014-04-10 15:18:38:929
704 26c
AU #############
2014-04-10 15:18:38:929
704 26c
AU All AU searches complete.
2014-04-10 15:18:38:929
704 26c
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-04-10 15:18:38:929
704 26c
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037

The patches have been applied to wsus to allow updating of W8 and 2012.
Looks to me like you've installed KB2734608 on the WSUS server and then failed to perform the required post-installation client-side procedures, resulting in the WUA being unable to validate the installation file (because it doesn't have the SHA-2 hash cached
in the client-side datastore).
2014-04-10 15:18:36:866 704
678 DnldMgr WARNING: Update validation failed, error 80246003.
0x80246003
-2145099773
WU_E_DM_UNKNOWNALGORITHM
The file metadata requested an unknown hash algorithm
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Similar Messages

  • Windows Update fails on Server 2012 R2 Virtual Machine

    I have set up a virtual network with two virtual machines. The first VM is Server 2008 R2 and is set up as a domain controller. The second VM is Server 2012 R2, and has been joined to the domain.  The DC (TestVM1) is also set up as a DNS server. 
    From TestVM2 (Server 2012 R2), I am able to log in using a domain login, and I am able to browse to a public website.
    I was able to run Windows Updates from TestVM1, but when I attempt to run Windows Updates from TestVM2, it fails.
    The Windows Update client shows "Error(s) found:" and "Code 8024402F". 
    Errors in WindowsUpdate.log include
    2014-10-17 18:26:14:235  800 950 Setup FATAL: GetClientUpdateUrl failed, err = 0x8024D009
    2014-10-17 18:26:26:238  800 950 Misc WARNING: Send failed with hr = 80072ee7.
    2014-10-17 18:26:26:238  800 950 Misc WARNING: Proxy List used: <(null)> Bypass List used : <(null)> Auth Schemes used : <None>
    2014-10-17 18:26:26:238  800 950 Misc WARNING: Send request failed, hr:0x80072ee7
    2014-10-17 18:26:26:238  800 950 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <http://v4.download.windowsupdate.com/c/msdownload/update/others/2014/08/13518740_b1b71791444e5dec0018bcd60303445108442c12.cab>.
    error 0x8024402c
    2014-10-17 18:26:26:238  800 950 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x8024402c
    2014-10-17 18:26:26:238  800 950 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x8024402c
    2014-10-17 18:26:26:238  800 950 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x8024402c
    2014-10-17 18:26:26:238  800 950 Misc WARNING: WinHttp: WinHttpQueryHeaders(WINHTTP_QUERY_CONTENT_TYPE) for X-CID failed. error 0x80072ef3
    2014-10-17 18:26:26:238  800 950 PT WARNING: ECP: DownloadCabFile: failed to get CDN Provider for error reporting, hr = 0X80072EF3
    2014-10-17 18:26:26:238  800 950 Misc WARNING: WinHttp: WinHttpQueryHeaders(WINHTTP_QUERY_CONTENT_TYPE) for X-CCC failed. error 0x80072ef3
    2014-10-17 18:26:26:238  800 950 PT WARNING: ECP: DownloadCabFile: failed to get CDN Country for error reporting, hr = 0X80072EF3
    2014-10-17 18:26:26:238  800 950 PT WARNING: ECP: Failed to download cab file from
    http://download.windowsupdate.com/c/msdownload/update/others/2014/08/13518740_b1b71791444e5dec0018bcd60303445108442c12.cab with error 0x8024402c
    2014-10-17 18:26:26:238  800 950 PT WARNING: ECP: This roundtrip contained some optimized updates which failed. New Update count = 34, Old Count = 60
    2014-10-17 18:26:26:317  800 950 PT   + SyncUpdates round trips: 1
    2014-10-17 18:26:26:317  800 950 PT WARNING: Sync of Updates: 0x8024402f
    2014-10-17 18:26:26:317  800 950 PT WARNING: SyncServerUpdatesInternal failed: 0x8024402f
    2014-10-17 18:26:26:317  800 950 Agent   * WARNING: Failed to synchronize, error = 0x8024402F
    2014-10-17 18:26:26:317  800 950 Agent   * WARNING: Exit code = 0x8024402F
    This is blocking further work.  Assistance would be greatly appreciated.

    I am having the exact same issue. Fresh build of Server 2012 R2 from the Microsoft Volume Licensing ISO. I tried before and after joining to the domain. Same error every time.  Firewall is turned off. No AV. We do have a cloud proxy service, but I bypassed
    that as a test and got the same error message.  I also tried to stop wuauserv and cleaning out the folder and starting it back up.  No joy as well.  This is a VM server running on ESXi 5.1.  Server 2008 servers dont seem to have
    an issue.  Server 2012 server don't seem to have an issue.  Only this new Server 2012 R2 server.  My logs are below:
    2014-10-28 14:28:46:104  696 4a4 AU ###########  AU: Uninitializing Automatic Updates  ###########
    2014-10-28 14:28:46:104  696 4a4 WuTask Uninit WU Task Manager
    2014-10-28 14:28:46:198  696 4a4 Service *********
    2014-10-28 14:28:46:198  696 4a4 Service **  END  **  Service: Service exit [Exit code = 0x240001]
    2014-10-28 14:28:46:198  696 4a4 Service *************
    2014-10-28 14:29:24:198  696 5c8 Misc ===========  Logging initialized (build: 7.9.9600.17092, tz: -0400)  ===========
    2014-10-28 14:29:24:198  696 5c8 Misc   = Process: C:\Windows\system32\svchost.exe
    2014-10-28 14:29:24:198  696 5c8 Misc   = Module: c:\windows\system32\wuaueng.dll
    2014-10-28 14:29:24:198  696 5c8 Service *************
    2014-10-28 14:29:24:198  696 5c8 Service ** START **  Service: Service startup
    2014-10-28 14:29:24:198  696 5c8 Service *********
    2014-10-28 14:29:24:214  696 5c8 Agent   * WU client version 7.9.9600.17092
    2014-10-28 14:29:24:214  696 5c8 Agent   * Base directory: C:\Windows\SoftwareDistribution
    2014-10-28 14:29:24:214  696 5c8 Agent   * Access type: No proxy
    2014-10-28 14:29:24:214  696 5c8 Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
    2014-10-28 14:29:24:214  696 5c8 Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
    2014-10-28 14:29:24:214  696 5c8 Agent   * Network state: Connected
    2014-10-28 14:29:24:214  696 5c8 Service UpdateNetworkState Ipv6, cNetworkInterfaces = 1.
    2014-10-28 14:29:24:214  696 5c8 Service UpdateNetworkState Ipv4, cNetworkInterfaces = 1.
    2014-10-28 14:29:24:510  696 5c8 DtaStor Default service for AU is {00000000-0000-0000-0000-000000000000}
    2014-10-28 14:29:24:510  696 5c8 DtaStor Default service for AU is {9482F4B4-E343-43B6-B170-9A65BC822C77}
    2014-10-28 14:29:24:542  696 5c8 DtaStor Data store successfully created
    2014-10-28 14:29:24:542  696 5c8 Agent ***********  Agent: Initializing global settings cache  ***********
    2014-10-28 14:29:24:542  696 5c8 Agent   * Endpoint Provider: 00000000-0000-0000-0000-000000000000
    2014-10-28 14:29:24:542  696 5c8 Agent   * WSUS server: <NULL>
    2014-10-28 14:29:24:542  696 5c8 Agent   * WSUS status server: <NULL>
    2014-10-28 14:29:24:542  696 5c8 Agent   * Target group: (Unassigned Computers)
    2014-10-28 14:29:24:542  696 5c8 Agent   * Windows Update access disabled: No
    2014-10-28 14:29:24:542  696 5c8 Misc WARNING: Network Cost is assumed to be not supported as something failed with trying to get handles to wcmapi.dll
    2014-10-28 14:29:24:542  696 5c8 WuTask WuTaskManager delay initialize completed successfully..
    2014-10-28 14:29:24:542  696 5c8 Report WARNING: Failed to initialize event uploader for new server {9482F4B4-E343-43B6-B170-9A65BC822C77} with hr = 8024043d.
    2014-10-28 14:29:24:542  696 5c8 Report CWERReporter::Init succeeded
    2014-10-28 14:29:24:542  696 5c8 Agent ***********  Agent: Initializing Windows Update Agent  ***********
    2014-10-28 14:29:24:542  696 5c8 DnldMgr Download manager restoring 0 downloads
    2014-10-28 14:29:24:557  696 5c8 AU ###########  AU: Initializing Automatic Updates  ###########
    2014-10-28 14:29:24:557  696 5c8 AU AIR Mode is disabled
    2014-10-28 14:29:24:557  696 5c8 AU   # AU disabled through User preference
    2014-10-28 14:29:24:557  696 5c8 AU   # Will interact with non-admins (Non-admins are elevated (User preference))
    2014-10-28 14:29:24:557  696 5c8 AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
    2014-10-28 14:29:24:557  696 5c8 AU AU finished delayed initialization
    2014-10-28 14:29:24:557  696 234 DnldMgr Asking handlers to reconcile their sandboxes
    2014-10-28 14:29:35:776  696 578 IdleTmr Incremented idle timer priority operation counter to 1
    2014-10-28 14:29:37:307  696 52c AU Triggering AU detection through DetectNow API
    2014-10-28 14:29:37:307  696 52c AU Triggering Online detection (interactive)
    2014-10-28 14:29:37:323  696 5c8 AU #############
    2014-10-28 14:29:37:323  696 5c8 AU ## START ##  AU: Search for updates
    2014-10-28 14:29:37:323  696 5c8 AU #########
    2014-10-28 14:29:37:323  696 5c8 SLS Retrieving SLS response from server...
    2014-10-28 14:29:37:323  696 5c8 SLS Making request with URL
    HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=871&L=en-US&P=&PT=0x7&WUA=7.9.9600.17092
    2014-10-28 14:29:58:339  696 5c8 Misc WARNING: Proxy List used: <172.25.7.9:80> Bypass List used : <(null)> Auth Schemes used : <None>
    2014-10-28 14:29:58:339  696 5c8 Misc WARNING: Send request failed, hr:0x80072ee2
    2014-10-28 14:29:58:339  696 5c8 Misc WARNING: WinHttp: SendRequestUsingProxy failed for <HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=871&L=en-US&P=&PT=0x7&WUA=7.9.9600.17092>.
    error 0x80072ee2
    2014-10-28 14:29:58:339  696 5c8 Misc WARNING: WinHttp: SendRequestToServerForFileInformation MakeRequest failed. error 0x80072ee2
    2014-10-28 14:29:58:339  696 5c8 Misc WARNING: WinHttp: SendRequestToServerForFileInformation failed with 0x80072ee2
    2014-10-28 14:29:58:339  696 5c8 Misc WARNING: WinHttp: ShouldFileBeDownloaded failed with 0x80072ee2
    2014-10-28 14:29:58:339  696 5c8 SLS FATAL: SLS:CSLSDownloader::GetUrlContent: DoFileDownload failed with 0x80072ee2.
    2014-10-28 14:29:58:339  696 5c8 SLS FATAL: GetResponse failed with hresult 0x80072ee2...
    2014-10-28 14:29:58:339  696 5c8 EP FATAL: EP: CSLSEndpointProvider::GetWUClientDataAndInitParser - failed to get SLS data, error = 0x80072EE2
    2014-10-28 14:29:58:339  696 5c8 EP FATAL: EP: CSLSEndpointProvider::GetEndpointFromSLS - Failed to get client data and init parser, error = 0x80072EE2
    2014-10-28 14:29:58:339  696 5c8 EP FATAL: Failed to obtain 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL, error = 0x80072EE2
    2014-10-28 14:29:58:339  696 5c8 Agent WARNING: Failed to obtain the authorization cab URL for service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, hr=0
    2014-10-28 14:29:58:339  696 5c8 Agent FATAL: Caller Service Recovery failed to opt in to service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, hr=0X80072EE2
    2014-10-28 14:29:58:339  696 5c8 IdleTmr WU operation (CSearchCall::Init ID 1) started; operation # 7; does use network; is not at background priority
    2014-10-28 14:29:58:339  696 5c8 IdleTmr Incremented PDC RefCount for Network to 1
    2014-10-28 14:29:58:339  696 5c8 IdleTmr Incremented idle timer priority operation counter to 2
    2014-10-28 14:29:58:385  696 5c8 Report ***********  Report: Initializing static reporting data  ***********
    2014-10-28 14:29:58:385  696 5c8 Report   * OS Version = 6.3.9600.0.0.196880
    2014-10-28 14:29:58:385  696 5c8 Report   * OS Product Type = 0x00000007
    2014-10-28 14:29:58:401  696 5c8 Report   * Computer Brand = VMware, Inc.
    2014-10-28 14:29:58:401  696 5c8 Report   * Computer Model = VMware Virtual Platform
    2014-10-28 14:29:58:401  696 5c8 Report   * Platform Role = 1
    2014-10-28 14:29:58:401  696 5c8 Report   * AlwaysOn/AlwaysConnected (AOAC) = 0
    2014-10-28 14:29:58:401  696 5c8 Report   * Bios Revision = 6.00
    2014-10-28 14:29:58:401  696 5c8 Report   * Bios Name = PhoenixBIOS 4.0 Release 6.0    
    2014-10-28 14:29:58:401  696 5c8 Report   * Bios Release Date = 2013-08-16T00:00:00
    2014-10-28 14:29:58:401  696 5c8 Report   * Bios Sku Number unavailable.
    2014-10-28 14:29:58:401  696 5c8 Report   * Bios Vendor = Phoenix Technologies LTD
    2014-10-28 14:29:58:401  696 5c8 Report   * Bios Family unavailable.
    2014-10-28 14:29:58:401  696 5c8 Report   * Bios Major Release = 4
    2014-10-28 14:29:58:401  696 5c8 Report   * Bios Minor Release = 6
    2014-10-28 14:29:58:401  696 5c8 Report   * Locale ID = 1033
    2014-10-28 14:29:58:401  696 5c8 Agent *** START ***  Queueing Finding updates [CallerId = AutomaticUpdatesWuApp  Id = 1]
    2014-10-28 14:29:58:401  696 5c8 AU <<## SUBMITTED ## AU: Search for updates  [CallId = {4A8CCE12-100B-4178-998D-608DFBB0B2D0} ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}]
    2014-10-28 14:29:58:432  696 b0c Agent ***  END  ***  Queueing Finding updates [CallerId = AutomaticUpdatesWuApp  Id = 1]
    2014-10-28 14:29:58:432  696 b0c Agent *************
    2014-10-28 14:29:58:432  696 b0c Agent ** START **  Agent: Finding updates [CallerId = AutomaticUpdatesWuApp  Id = 1]
    2014-10-28 14:29:58:432  696 b0c Agent *********
    2014-10-28 14:29:58:432  696 b0c Agent   * Online = Yes; Ignore download priority = No
    2014-10-28 14:29:58:432  696 b0c Agent   * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1
    or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
    2014-10-28 14:29:58:432  696 b0c Agent   * ServiceID = {9482F4B4-E343-43B6-B170-9A65BC822C77} Windows Update
    2014-10-28 14:29:58:432  696 b0c Agent   * Search Scope = {Machine & All Users}
    2014-10-28 14:29:58:432  696 b0c Agent   * Caller SID for Applicability: S-1-5-21-600452275-980750782-2124898778-9669
    2014-10-28 14:29:58:432  696 b0c SLS Retrieving SLS response from server...
    2014-10-28 14:29:58:432  696 b0c SLS Making request with URL
    HTTPS://sls.update.microsoft.com/SLS/{9482F4B4-E343-43B6-B170-9A65BC822C77}/x64/6.3.9600.0/0?CH=871&L=en-US&P=&PT=0x7&WUA=7.9.9600.17092
    2014-10-28 14:29:59:135  696 b0c Misc Validating signature for C:\Windows\SoftwareDistribution\SLS\9482F4B4-E343-43B6-B170-9A65BC822C77\sls.cab with dwProvFlags 0x00000080:
    2014-10-28 14:29:59:135  696 b0c Misc  Microsoft signed: NA
    2014-10-28 14:29:59:135  696 b0c Misc  Infrastructure signed: Yes
    2014-10-28 14:29:59:135  696 b0c Misc Validating signature for C:\Windows\SoftwareDistribution\SLS\9482F4B4-E343-43B6-B170-9A65BC822C77\TMP3958.tmp with dwProvFlags 0x00000080:
    2014-10-28 14:29:59:135  696 b0c Misc  Microsoft signed: NA
    2014-10-28 14:29:59:135  696 b0c Misc  Infrastructure signed: Yes
    2014-10-28 14:29:59:135  696 b0c EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL: "117cab2d-82b1-4b5a-a08c-4d62dbee7782"
    2014-10-28 14:29:59:135  696 b0c SLS FATAL: SLS:CSLSRequest::RetrieveAdditionalAttributesIfRequired: CoCreateInstance failed with 0x80040154.
    2014-10-28 14:29:59:135  696 b0c Agent WARNING: Failed to retrieve SLS response data for service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, error = 0x80040154
    2014-10-28 14:29:59:135  696 b0c Agent FATAL: Caller Service Recovery failed to opt in to service 117cab2d-82b1-4b5a-a08c-4d62dbee7782, hr=0X80040154
    2014-10-28 14:29:59:135  696 b0c EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir Client/Server URL: "https://fe2.update.microsoft.com/v6/ClientWebService/client.asmx"
    2014-10-28 14:29:59:135  696 b0c Setup Checking for agent SelfUpdate
    2014-10-28 14:29:59:135  696 b0c Setup Client version: Core: 7.9.9600.17092  Aux: 7.9.9600.17031
    2014-10-28 14:29:59:135  696 b0c EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SelfUpdate URL: "https://fe2.update.microsoft.com/v10/3/windowsupdate/selfupdate"
    2014-10-28 14:30:00:151  696 b0c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab with dwProvFlags 0x00000080:
    2014-10-28 14:30:00:151  696 b0c Misc  Microsoft signed: NA
    2014-10-28 14:30:00:151  696 b0c Misc  Infrastructure signed: Yes
    2014-10-28 14:30:00:151  696 b0c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\TMP3D51.tmp with dwProvFlags 0x00000080:
    2014-10-28 14:30:00:167  696 b0c Misc  Microsoft signed: NA
    2014-10-28 14:30:00:167  696 b0c Misc  Infrastructure signed: Yes
    2014-10-28 14:30:00:167  696 b0c Setup FATAL: GetClientUpdateUrl failed, err = 0x8024D009
    2014-10-28 14:30:00:167  696 b0c Setup Skipping SelfUpdate check based on the /SKIP directive in wuident
    2014-10-28 14:30:00:167  696 b0c Setup SelfUpdate check completed.  SelfUpdate is NOT required.
    2014-10-28 14:30:00:323  696 b0c PT +++++++++++  PT: Synchronizing server updates  +++++++++++
    2014-10-28 14:30:00:323  696 b0c PT   + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, Server URL =
    https://fe2.update.microsoft.com/v6/ClientWebService/client.asmx
    2014-10-28 14:30:01:104  696 b0c PT WARNING: Cached cookie has expired or new PID is available
    2014-10-28 14:30:01:104  696 b0c PT WARNING: PTWarn: Anonymous plug-in skipped for WU
    2014-10-28 14:30:01:198  696 b0c Agent Reading cached app categories using lifetime 604800 seconds
    2014-10-28 14:30:01:198  696 b0c Agent Read 1 cached app categories
    2014-10-28 14:30:40:917  696 b0c PT WARNING: ECP: Failed to validate cab file digest downloaded from
    http://download.windowsupdate.com/d/msdownload/update/others/2013/09/9242543_a77d372b9c8b13c599a3daf4b321ea1903da9a72.cab with error 0x80091007
    2014-10-28 14:30:40:917  696 b0c PT WARNING: ECP: This roundtrip contained some optimized updates which failed. New Update count = 57, Old Count = 60
    2014-10-28 14:30:41:151  696 b0c PT   + SyncUpdates round trips: 14
    2014-10-28 14:30:41:151  696 b0c PT WARNING: Sync of Updates: 0x8024402f
    2014-10-28 14:30:41:151  696 b0c PT WARNING: SyncServerUpdatesInternal failed: 0x8024402f
    2014-10-28 14:30:41:151  696 b0c Agent   * WARNING: Failed to synchronize, error = 0x8024402F
    2014-10-28 14:30:41:151  696 b0c Agent   * WARNING: Exit code = 0x8024402F
    2014-10-28 14:30:41:151  696 b0c Agent *********
    2014-10-28 14:30:41:151  696 b0c Agent **  END  **  Agent: Finding updates [CallerId = AutomaticUpdatesWuApp  Id = 1]
    2014-10-28 14:30:41:151  696 b0c Agent *************
    2014-10-28 14:30:41:151  696 b0c Agent WARNING: WU client failed Searching for update with error 0x8024402f
    2014-10-28 14:30:41:151  696 b0c IdleTmr WU operation (CSearchCall::Init ID 1, operation # 7) stopped; does use network; is not at background priority
    2014-10-28 14:30:41:151  696 b0c IdleTmr Decremented PDC RefCount for Network to 0
    2014-10-28 14:30:41:151  696 b0c IdleTmr Decremented idle timer priority operation counter to 1
    2014-10-28 14:30:41:151  696 6fc AU >>##  RESUMED  ## AU: Search for updates [CallId = {4A8CCE12-100B-4178-998D-608DFBB0B2D0} ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}]
    2014-10-28 14:30:41:151  696 6fc AU   # WARNING: Search callback failed, result = 0x8024402F
    2014-10-28 14:30:41:151  696 6fc AU #########
    2014-10-28 14:30:41:151  696 6fc AU ##  END  ##  AU: Search for updates  [CallId = {4A8CCE12-100B-4178-998D-608DFBB0B2D0} ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}]
    2014-10-28 14:30:41:151  696 6fc AU #############
    2014-10-28 14:30:41:151  696 6fc AU All AU searches complete.
    2014-10-28 14:30:41:151  696 6fc AU   # WARNING: Failed to find updates with error code 8024402f
    Derek
    Systems Engineer
    Derek Desktop Engineer

  • Digital Filing broken with windows 8.1 and Server 2012 R2?

    Hello
    Recently upgraded my machines so now I have Windows 8.1 and Server 2012 R2 running. The scanning from my Officejet L7680 to a network share on one of these machines is no longer working. 
    Looking into it with network monitors I can see that the login of the user and password is working but then the save of the file on the share gives and error.
    In windows 8.1 it starts creating the file but cannot add content to it (so the file is 0 Bytes in size) on Server 2012 R2 the creation of the file already gives and error.
    Searching around the web seems to indicate that changes in the SMB protocol on the latest windows versions are the cause of this and other MFP suppliers are providing firmware updates to fix this. There seems no way to fix this at the Windows side.
    Can HP confirm this issue and indicate which all in ones will be able to connect to network shares on these latest windows version ? With or without a firmware update.

    I can confirm that I'm experiencing the same issue on my Windows 8.1 x64 machine and Windows 2012 R2 Essentials. Will there ever be a firmware update for the L7680 printer so we can get this functionality working again?

  • Can't change printer port on Windows 8.1 and Server 2012 R2

    1. Install "Lexmark X646e Class Driver" using a in-box print driver (i.e. one comes with the Windows installation base) .
    2. Go to "Printer properties" -> "Port"
    3. Select a custom monitor port, and the following error occurs in Event Viewer.
    An error occurred while configuring print queue 'Lexmark X646e Class Driver'. Printer driver 'Lexmark X646e Class Driver' may not be used in conjunction with a non-inbox port monitor.
    Same steps applied on Windows 8 and Server 2012, and not issues found. The restriction/limitation is newly added in Window 8.1 and Server 2012 R2. 
    Changing to a custom monitor port after printer driver installation is very important for us.
    How can we solve or workaround the above issue, so it can behave like Windows 8 and Server 2012? 

    What Port Monitor just so I can bubble this information to some others?
    Alan Morris Windows Printing Team
    Hi Alan:
    We developed a custom printing system, which involved the following configurations:
    1. Create a custom port monitor on server 2012 r2.
    2. Change an existing print queue to use this custom port monitor, and share this print queue.
    3. All workstations will print to this shared print queue on the server.
    The goal is to manage/monitor the print information in StartDocPort for all printing for instance.  This is what we've been doing for a long time.
    Now we upgraded our system from server 2012 to server 2012 R2, but we can't change the port monitor to our ones anymore.
    I've tried the Type3 printer driver, such as Brother Color Type3 Class Driver, unfortunately it didn't work if the installation is using "Add a printer", and select the driver from the list.   
    The only way to make it work is to install the printer driver using the one downloaded from the vendor's website, this will bypass Windows "Add a printer". 
    Is there any chance we can make this to behave like server 2012 or earlier? Modify registry keys?
    Cheers
    Steven

  • Windows Update Error 80080005 Windows 7 Client with WSUS 3.0 SP2 server

    Hello everyone, I've looked around at other threads related to my issue, and I can't seem to find a correct answer.
    I have a computer lab that I've recently installed a Windows 7 Enterprise image onto 35 Dell Optiplex computers (most are 380's, a few older 360's).
    I created the image using MDT2010 and used one of the 380's as a reference.
    All has been well for about a month or two but recently 6 computers are giving me Windows Update errors with the error code of 80080005.
    I have a WSUS 3.0 SP2 server running, and all of my other computers seem to be getting their updates just fine.  WSUS has the problematic computers in it's database, but it shows that they haven't checked in for "x" days.
    I have Avast 4.8 Professional installed, I have OpenDNS configured to block bad websites, ____, etc. and I also use an Untangle server to prevent access to bad websites.  I've ran a Malwarebytes' Anti-Malware scan on the affected computers, as well
    as Windows Defender scan, and Windows Live OneCare scans, and all have found no malicious software.
    I have also tried resetting the Windows update service as described here: http://support.microsoft.com/kb/971058 as well as a script that supposedly does the same thing, but also resets all previous
    update events, but I can't find the script source right now (I had ran it last week, and it didn't work).
    I'm currently running a SFC /Scannow on one of the computers, and now it has finished.  It gives the error: Windows Resource Protection could not start the repair service.  I'll have to google that next.
    The last windows update that ran on the computer that I'm working on now was installed on 11-18-2010 and was a Windows Defender Update (KB915597 Def: 1.93.1985.0)
    Previous to that was 11/9/2010 2 updates: KB977165 and KB981852.
    I guess I'll have to look at all of the other machines to see if they have the same updates installed.
    Anyway, has anyone else had this problem?  I've seen vista home editions, and RC's but no real Windows 7 Pro+ RTM versions in business environments where updates were controlled by WSUS.
    Thanks for any help that you can provide!
    By the way, I only work at this location once a week (tuesdays, well thursdays too, but I'm next door to this building, but I have remote access), so bare with me on trying to fix things.

    Ok, for the sake of completeness, I have completed the instructions given by Miya Yao.
    After stopping the Windows Update Service (from an Admin Command prompt window), renaming the SoftwareDistribution folder to SDold, then starting the update service again, I still receive the same error when checking for updates.
    The windows update log shows this (starting from about 4am) and I just reset the service at about 9:10, which you can see in the log.
    2010-12-21 04:19:02:342 940 f20 Agent WARNING: WU client failed Searching for update with error 0x80080005
    2010-12-21 04:19:02:342 940 cd4 AU >>## RESUMED ## AU: Search for updates [CallId = {8957B50F-46F1-44C4-A347-20D4C5E91D47}]
    2010-12-21 04:19:02:342 940 cd4 AU # WARNING: Search callback failed, result = 0x80080005
    2010-12-21 04:19:02:342 940 f20 Report CWERReporter finishing event handling. (00000000)
    2010-12-21 04:19:02:342 940 cd4 AU # WARNING: Failed to find updates with error code 80080005
    2010-12-21 04:19:02:342 940 cd4 AU #########
    2010-12-21 04:19:02:342 940 cd4 AU ## END ## AU: Search for updates [CallId = {8957B50F-46F1-44C4-A347-20D4C5E91D47}]
    2010-12-21 04:19:02:342 940 cd4 AU #############
    2010-12-21 04:19:02:342 940 cd4 AU Successfully wrote event for AU health state:0
    2010-12-21 04:19:02:342 940 cd4 AU AU setting next detection timeout to 2010-12-21 14:19:02
    2010-12-21 04:19:02:342 940 cd4 AU Setting AU scheduled install time to 2010-12-22 08:00:00
    2010-12-21 04:19:02:342 940 cd4 AU Successfully wrote event for AU health state:0
    2010-12-21 04:19:02:342 940 cd4 AU Successfully wrote event for AU health state:0
    2010-12-21 04:19:07:350 940 f20 Report REPORT EVENT: {A472759C-BEE7-4161-84E8-41F1C1D03AB4} 2010-12-21 04:19:02:342-0500 1 148 101 {61CA813A-7585-442E-A66B-B0D15CE6BDC0} 1 80080005 SelfUpdate Failure Software Synchronization Windows Update Client failed to detect with error 0x80080005.
    2010-12-21 04:19:07:350 940 f20 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
    2010-12-21 04:19:07:350 940 f20 Report WER Report sent: 7.4.7600.226 0x80080005 61CA813A-7585-442E-A66B-B0D15CE6BDC0 Scan 101 Managed
    2010-12-21 04:19:07:350 940 f20 Report CWERReporter finishing event handling. (00000000)
    2010-12-21 04:24:22:767 940 f20 PT WARNING: Cached cookie has expired or new PID is available
    2010-12-21 04:24:22:767 940 f20 PT Initializing simple targeting cookie, clientId = a6d6dc1c-d844-451c-8609-3879e6cacb33, target group = , DNS name = lab24.sja.local
    2010-12-21 04:24:22:767 940 f20 PT Server URL = http://server2:8530/SimpleAuthWebService/SimpleAuth.asmx
    2010-12-21 04:24:22:814 940 f20 Report Uploading 2 events using cached cookie, reporting URL = http://server2:8530/ReportingWebService/ReportingWebService.asmx
    2010-12-21 04:24:22:814 940 f20 Report Reporter successfully uploaded 2 events.
    2010-12-21 06:59:23:020 940 b4c AU AU was unable to detect updates for more than 48 hours
    2010-12-21 06:59:28:027 940 c78 Report REPORT EVENT: {511B1C92-939C-4E97-A51B-50E75FCB7AEF} 2010-12-21 06:59:23:020-0500 1 149 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Failure Software Synchronization Unable to Connect: Windows is unable to connect to the automatic updates service and therefore cannot download and install updates according to the set schedule. Windows will continue to try to establish a connection.
    2010-12-21 06:59:28:027 940 c78 Report CWERReporter finishing event handling. (00000000)
    2010-12-21 09:02:03:476 940 2f4 AU Triggering AU detection through DetectNow API
    2010-12-21 09:02:03:476 940 2f4 AU Triggering Online detection (interactive)
    2010-12-21 09:02:03:476 940 b4c AU #############
    2010-12-21 09:02:03:476 940 b4c AU ## START ## AU: Search for updates
    2010-12-21 09:02:03:477 940 b4c AU #########
    2010-12-21 09:02:03:488 940 b4c AU <<## SUBMITTED ## AU: Search for updates [CallId = {B65ACC67-ED84-45D4-9774-D0475806E74B}]
    2010-12-21 09:02:03:488 940 e38 Agent *************
    2010-12-21 09:02:03:488 940 e38 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
    2010-12-21 09:02:03:488 940 e38 Agent *********
    2010-12-21 09:02:03:488 940 e38 Agent * Online = Yes; Ignore download priority = No
    2010-12-21 09:02:03:488 940 e38 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
    2010-12-21 09:02:03:488 940 e38 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
    2010-12-21 09:02:03:488 940 e38 Agent * Search Scope = {Machine}
    2010-12-21 09:02:03:488 940 e38 Setup Checking for agent SelfUpdate
    2010-12-21 09:02:03:489 940 e38 Setup Client version: Core: 7.4.7600.226 Aux: 7.4.7600.226
    2010-12-21 09:02:03:489 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
    2010-12-21 09:02:03:496 940 e38 Misc Microsoft signed: Yes
    2010-12-21 09:02:06:071 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
    2010-12-21 09:02:06:078 940 e38 Misc Microsoft signed: Yes
    2010-12-21 09:02:06:080 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
    2010-12-21 09:02:06:087 940 e38 Misc Microsoft signed: Yes
    2010-12-21 09:02:06:100 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
    2010-12-21 09:02:06:107 940 e38 Misc Microsoft signed: Yes
    2010-12-21 09:02:06:123 940 e38 Setup Determining whether a new setup handler needs to be downloaded
    2010-12-21 09:02:06:123 940 e38 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\Handler\WuSetupV.exe:
    2010-12-21 09:02:06:129 940 e38 Misc Microsoft signed: Yes
    2010-12-21 09:02:06:129 940 e38 Setup SelfUpdate handler update NOT required: Current version: 7.4.7600.226, required version: 7.4.7600.226
    2010-12-21 09:02:06:129 940 e38 Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.4.7600.226"
    2010-12-21 09:02:15:386 940 b4c AU AU received policy change subscription event
    2010-12-21 09:02:36:165 940 e38 Setup WARNING: Cbs StartSession, error = 0x80080005
    2010-12-21 09:02:36:165 940 e38 Setup FATAL: Applicability evaluation for setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.4.7600.226" failed, error = 0x80080005
    2010-12-21 09:02:36:165 940 e38 Setup FATAL: SelfUpdate check failed, err = 0x80080005
    2010-12-21 09:02:36:165 940 e38 Agent * WARNING: Skipping scan, self-update check returned 0x80080005
    2010-12-21 09:02:36:165 940 e38 Agent * WARNING: Exit code = 0x80080005
    2010-12-21 09:02:36:165 940 e38 Agent *********
    2010-12-21 09:02:36:165 940 e38 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
    2010-12-21 09:02:36:165 940 e38 Agent *************
    2010-12-21 09:02:36:165 940 e38 Agent WARNING: WU client failed Searching for update with error 0x80080005
    2010-12-21 09:02:36:165 940 e8c AU >>## RESUMED ## AU: Search for updates [CallId = {B65ACC67-ED84-45D4-9774-D0475806E74B}]
    2010-12-21 09:02:36:165 940 e8c AU # WARNING: Search callback failed, result = 0x80080005
    2010-12-21 09:02:36:165 940 e8c AU # WARNING: Failed to find updates with error code 80080005
    2010-12-21 09:02:36:165 940 e8c AU #########
    2010-12-21 09:02:36:165 940 e8c AU ## END ## AU: Search for updates [CallId = {B65ACC67-ED84-45D4-9774-D0475806E74B}]
    2010-12-21 09:02:36:165 940 e8c AU #############
    2010-12-21 09:02:36:165 940 e8c AU Successfully wrote event for AU health state:0
    2010-12-21 09:02:36:165 940 e8c AU AU setting next detection timeout to 2010-12-21 19:02:36
    2010-12-21 09:02:36:165 940 e8c AU Setting AU scheduled install time to 2010-12-22 08:00:00
    2010-12-21 09:02:36:165 940 e8c AU Successfully wrote event for AU health state:0
    2010-12-21 09:02:36:165 940 e8c AU Successfully wrote event for AU health state:0
    2010-12-21 09:02:41:172 940 e38 Report REPORT EVENT: {678C2913-B3B3-4F14-9310-C2E2B1F3334A} 2010-12-21 09:02:36:165-0500 1 148 101 {61CA813A-7585-442E-A66B-B0D15CE6BDC0} 1 80080005 SelfUpdate Failure Software Synchronization Windows Update Client failed to detect with error 0x80080005.
    2010-12-21 09:02:41:172 940 e38 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
    2010-12-21 09:02:41:172 940 e38 Report WER Report sent: 7.4.7600.226 0x80080005 61CA813A-7585-442E-A66B-B0D15CE6BDC0 Scan 101 Managed
    2010-12-21 09:02:41:172 940 e38 Report CWERReporter finishing event handling. (00000000)
    2010-12-21 09:06:07:779 940 b4c AU ########### AU: Uninitializing Automatic Updates ###########
    2010-12-21 09:06:37:809 940 b4c Handler FATAL: UH: 0x80080005: StartSession failed in CCbs::IsCbsPending
    2010-12-21 09:06:37:840 940 b4c Report CWERReporter finishing event handling. (00000000)
    2010-12-21 09:06:37:872 940 b4c Service *********
    2010-12-21 09:06:37:872 940 b4c Service ** END ** Service: Service exit [Exit code = 0x240001]
    2010-12-21 09:06:37:872 940 b4c Service *************
    2010-12-21 09:08:37:104 940 e84 Misc =========== Logging initialized (build: 7.4.7600.226, tz: -0500) ===========
    2010-12-21 09:08:37:104 940 e84 Misc = Process: C:\Windows\system32\svchost.exe
    2010-12-21 09:08:37:104 940 e84 Misc = Module: c:\windows\system32\wuaueng.dll
    2010-12-21 09:08:37:104 940 e84 Service *************
    2010-12-21 09:08:37:104 940 e84 Service ** START ** Service: Service startup
    2010-12-21 09:08:37:104 940 e84 Service *********
    2010-12-21 09:08:37:108 940 e84 Agent * WU client version 7.4.7600.226
    2010-12-21 09:08:37:108 940 e84 Agent * Base directory: C:\Windows\SoftwareDistribution
    2010-12-21 09:08:37:108 940 e84 Agent * Access type: No proxy
    2010-12-21 09:08:37:108 940 e84 Agent * Network state: Connected
    2010-12-21 09:08:37:453 940 e84 DtaStor Default service for AU is {00000000-0000-0000-0000-000000000000}
    2010-12-21 09:08:37:462 940 e84 DtaStor Default service for AU is {9482F4B4-E343-43B6-B170-9A65BC822C77}
    2010-12-21 09:08:37:464 940 e84 Agent WARNING: failed to access the auth cab, fatal error 0x80070003
    2010-12-21 09:08:37:464 940 e84 Agent WARNING: Invalid service in the backup data store; cleaning up
    2010-12-21 09:08:37:465 940 e84 Agent WARNING: Failed to add and register service 7971f918-a847-4430-9279-4a52d1efe18d to the data store 0x80240031
    2010-12-21 09:08:37:465 940 e84 Agent WARNING: Default Service Recovery: Attempting to add pending registration for service 7971f918-a847-4430-9279-4a52d1efe18d to the data store
    2010-12-21 09:09:22:474 940 e84 Report CWERReporter::Init succeeded
    2010-12-21 09:09:22:474 940 e84 Agent *********** Agent: Initializing Windows Update Agent ***********
    2010-12-21 09:09:22:475 940 e84 Agent *********** Agent: Initializing global settings cache ***********
    2010-12-21 09:09:22:475 940 e84 Agent * WSUS server: http://server2:8530
    2010-12-21 09:09:22:475 940 e84 Agent * WSUS status server: http://server2:8530
    2010-12-21 09:09:22:475 940 e84 Agent * Target group: (Unassigned Computers)
    2010-12-21 09:09:22:475 940 e84 Agent * Windows Update access disabled: No
    2010-12-21 09:09:22:475 940 e84 DnldMgr Download manager restoring 0 downloads
    2010-12-21 09:09:22:476 940 e84 AU ########### AU: Initializing Automatic Updates ###########
    2010-12-21 09:09:22:477 940 e84 AU # WSUS server: http://server2:8530
    2010-12-21 09:09:22:477 940 e84 AU # Detection frequency: 22
    2010-12-21 09:09:22:477 940 e84 AU # Approval type: Scheduled (Policy)
    2010-12-21 09:09:22:477 940 e84 AU # Scheduled install day/time: Every day at 3:00
    2010-12-21 09:09:22:477 940 e84 AU # Auto-install minor updates: Yes (Policy)
    2010-12-21 09:09:22:478 940 e84 AU Setting AU scheduled install time to 2010-12-22 08:00:00
    2010-12-21 09:09:22:751 940 e84 Report *********** Report: Initializing static reporting data ***********
    2010-12-21 09:09:22:751 940 e84 Report * OS Version = 6.1.7600.0.0.65792
    2010-12-21 09:09:22:751 940 e84 Report * OS Product Type = 0x00000004
    2010-12-21 09:09:22:772 940 e84 Report * Computer Brand = Dell Inc.
    2010-12-21 09:09:22:772 940 e84 Report * Computer Model = OptiPlex 380
    2010-12-21 09:09:22:775 940 e84 Report * Bios Revision = A01
    2010-12-21 09:09:22:775 940 e84 Report * Bios Name = Phoenix ROM BIOS PLUS Version 1.10 A01
    2010-12-21 09:09:22:775 940 e84 Report * Bios Release Date = 2010-03-11T00:00:00
    2010-12-21 09:09:22:775 940 e84 Report * Locale ID = 1033
    2010-12-21 09:09:22:777 940 e84 AU Successfully wrote event for AU health state:0
    2010-12-21 09:09:22:777 940 e84 AU Initializing featured updates
    2010-12-21 09:09:22:777 940 e84 AU Found 0 cached featured updates
    2010-12-21 09:09:22:777 940 e84 AU Successfully wrote event for AU health state:0
    2010-12-21 09:09:22:778 940 e84 AU Successfully wrote event for AU health state:0
    2010-12-21 09:09:22:778 940 e84 AU AU finished delayed initialization
    2010-12-21 09:09:27:781 940 36c Report CWERReporter finishing event handling. (00000000)
    2010-12-21 09:10:20:421 940 bf0 AU Triggering AU detection through DetectNow API
    2010-12-21 09:10:20:422 940 bf0 AU Triggering Online detection (interactive)
    2010-12-21 09:10:20:422 940 e84 AU #############
    2010-12-21 09:10:20:422 940 e84 AU ## START ## AU: Search for updates
    2010-12-21 09:10:20:422 940 e84 AU #########
    2010-12-21 09:10:20:425 940 e84 AU <<## SUBMITTED ## AU: Search for updates [CallId = {F1E8D669-5A48-4C25-832F-4A5ABD80270F}]
    2010-12-21 09:10:20:425 940 36c Agent *************
    2010-12-21 09:10:20:425 940 36c Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
    2010-12-21 09:10:20:425 940 36c Agent *********
    2010-12-21 09:10:20:425 940 36c Agent * Online = Yes; Ignore download priority = No
    2010-12-21 09:10:20:425 940 36c Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
    2010-12-21 09:10:20:425 940 36c Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
    2010-12-21 09:10:20:425 940 36c Agent * Search Scope = {Machine}
    2010-12-21 09:10:20:425 940 36c Setup Checking for agent SelfUpdate
    2010-12-21 09:10:20:426 940 36c Setup Client version: Core: 7.4.7600.226 Aux: 7.4.7600.226
    2010-12-21 09:10:22:715 940 36c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
    2010-12-21 09:10:22:725 940 36c Misc Microsoft signed: Yes
    2010-12-21 09:10:22:745 940 36c Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
    2010-12-21 09:10:22:750 940 36c Misc Microsoft signed: Yes
    2010-12-21 09:10:22:765 940 36c Setup Determining whether a new setup handler needs to be downloaded
    2010-12-21 09:10:22:765 940 36c Setup SelfUpdate handler is not found. It will be downloaded
    2010-12-21 09:10:22:765 940 36c Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.4.7600.226"
    2010-12-21 09:10:52:778 940 36c Setup WARNING: Cbs StartSession, error = 0x80080005
    2010-12-21 09:10:52:778 940 36c Setup FATAL: Applicability evaluation for setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.4.7600.226" failed, error = 0x80080005
    2010-12-21 09:10:52:778 940 36c Setup FATAL: SelfUpdate check failed, err = 0x80080005
    2010-12-21 09:10:52:779 940 36c Agent * WARNING: Skipping scan, self-update check returned 0x80080005
    2010-12-21 09:10:52:779 940 36c Agent * WARNING: Exit code = 0x80080005
    2010-12-21 09:10:52:779 940 36c Agent *********
    2010-12-21 09:10:52:779 940 36c Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
    2010-12-21 09:10:52:779 940 36c Agent *************
    2010-12-21 09:10:52:779 940 36c Agent WARNING: WU client failed Searching for update with error 0x80080005
    2010-12-21 09:10:52:779 940 ba0 AU >>## RESUMED ## AU: Search for updates [CallId = {F1E8D669-5A48-4C25-832F-4A5ABD80270F}]
    2010-12-21 09:10:52:780 940 ba0 AU # WARNING: Search callback failed, result = 0x80080005
    2010-12-21 09:10:52:780 940 ba0 AU # WARNING: Failed to find updates with error code 80080005
    2010-12-21 09:10:52:780 940 ba0 AU #########
    2010-12-21 09:10:52:780 940 ba0 AU ## END ## AU: Search for updates [CallId = {F1E8D669-5A48-4C25-832F-4A5ABD80270F}]
    2010-12-21 09:10:52:780 940 ba0 AU #############
    2010-12-21 09:10:52:783 940 ba0 AU Successfully wrote event for AU health state:0
    2010-12-21 09:10:52:783 940 ba0 AU AU setting next detection timeout to 2010-12-21 19:10:52
    2010-12-21 09:10:52:783 940 ba0 AU Setting AU scheduled install time to 2010-12-22 08:00:00
    2010-12-21 09:10:52:783 940 ba0 AU Successfully wrote event for AU health state:0
    2010-12-21 09:10:52:784 940 ba0 AU Successfully wrote event for AU health state:0

  • Log error "Could not load file or assembly 'BarcodeConversion' or one of its dependencies. Access is denied. This code work fine in server 2008 but get this error in server 2012

    This code work fine in server 2008, but get this error in server 2012.  Do yo have any idea?

    Need some more info as to where this is installed and how.
    First thing to try would be to uninstall the solution and reinstall.
    Check the GAC for your assembly as well as web.config.
    If you don't see it in one of those places, something went wrong with the install and you'll need to start over.
    Brandon James SharePoint Developer/Administrator

  • How to uninstall/remove security update for SQL Server 2012

    My requirement is to uninstall/remove security update for SQL
    Server 2012 Service Pack 1 only. so are these below steps are correct or do I need to take any extra precaution for uninstallation?
    Go to Control panelàProgramsà
    Programs and FeaturesàInstalled Updrtes, right click on update and uninstall
    As per my knowledge in SQL Server 2005, we cannot uninstall a service pack. we have to uninstall SQL Server 2005 completely, and reinstall SQL Server 2005 with previous service
    packs and updates. but Starting SQL Server 2008, we can uninstall a service pack using Control Panel.
    Rahul

    http://blogs.msdn.com/b/askjay/archive/2011/02/07/uninstalling-a-sql-server-service-pack.aspx
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • Windows update error Code 80072EF3

    Greetings!
    I have a Dell PowerEdge T320 that is experiencing this issue: Windows update error Code 80072EF3
    I followed instructions in article
    http://support.microsoft.com/kb/947821/en-usand ran the DISM.exe with the offline source (my DVD drive) to avoid using the windows update component that appears to be damaged. Command completed, but no effect on the error.
    Last successful update session was 7/8/2014
    Security Update for Windows Server 2012 (KB2922229) cancelled. Tried to install manually. Not applicable.
    Update for Windows Server 2012 (KB2811660) Failed.  When running the manual download get the message it is already installed. Same for KB2855336
    Any help appreciated.
    Below is the detailed update history.
    This link contains the log for the DISM repair tool:
    https://www.dropbox.com/s/3aufjud0wd0n53n/CBS.zip

    Hi,
    Please re-run Windows update and then provide us the windowsupdate.log file for check. It is under C:\Windows.
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • Possiblely a bug - windows update error when using NAT between Hyper-V Virtual Ethernet Adapter

    I'm using SCVMM managing my Hyper-V machine.
    I have three physical network adapter on my hyper-v host as below:
    I'm using SCVMM 2012 SP1 to create two virtual network adapter base on each Realtek controller, Bridge the traffic from the physical adapter, NAT the traffic from the internal virtual adapter to the internet facing virtual adater.
    I can access the internet but i got the windows update error as below
    If i NAT the internal virtual adapter traffic to the WIFI physical  internal facing adapter, windows update is fine.
    I'm using my hyper-v server windows NAT feature.
    I did google a round, it looks like something wrong when you NAT the two virtual network adatper..
    if anyone here can help, that's would be much appreciated.
    2013-03-27    18:38:25:627     868    ba4    AU    ## START ##  AU: Search for updates
    2013-03-27    18:38:25:627     868    ba4    AU    #########
    2013-03-27    18:38:25:627     868    ba4    AU    <<## SUBMITTED ## AU: Search for updates  [CallId = {F6806137-9A32-4476-AF23-38B11881056E} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
    2013-03-27    18:38:25:627     868    934    Agent    *************
    2013-03-27    18:38:25:627     868    934    Agent    ** START **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2013-03-27    18:38:25:627     868    934    Agent    *********
    2013-03-27    18:38:25:627     868    934    Agent      * Online = Yes; Ignore download priority = No
    2013-03-27    18:38:25:627     868    934    Agent      * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation'
    or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
    2013-03-27    18:38:25:627     868    934    Agent      * ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service
    2013-03-27    18:38:25:627     868    934    Agent      * Search Scope = {Machine & All Users}
    2013-03-27    18:38:25:627     868    934    Agent      * Caller SID for Applicability: S-1-5-21-759915917-1653667288-1560420946-1106
    2013-03-27    18:38:25:627     868    934    EP    Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL: "http://ds.download.windowsupdate.com/v10/2/microsoftupdate/redir/muauth.cab"
    2013-03-27    18:38:25:627     868    934    EP    Got 7971F918-A847-4430-9279-4A52D1EFE18D redir Client/Server URL: "https://fe1.update.microsoft.com/v6/ClientWebService/client.asmx"
    2013-03-27    18:38:25:627     868    934    Setup    Checking for agent SelfUpdate
    2013-03-27    18:38:25:627     868    934    Setup    Client version: Core: 7.8.9200.16465  Aux: 7.8.9200.16451
    2013-03-27    18:38:25:799     868    934    EP    Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SelfUpdate URL: "http://fe1.update.microsoft.com/v10/2/windowsupdate/selfupdate"
    2013-03-27    18:38:25:799     868    934    Misc    Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
    2013-03-27    18:38:25:815     868    934    Misc     Microsoft signed: Yes
    2013-03-27    18:38:25:815     868    934    Misc     Infrastructure signed: Yes
    2013-03-27    18:38:26:002     868    934    Misc    Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
    2013-03-27    18:38:26:002     868    934    Misc     Microsoft signed: Yes
    2013-03-27    18:38:26:002     868    934    Misc     Infrastructure signed: Yes
    2013-03-27    18:38:26:002     868    934    Setup    Skipping SelfUpdate check based on the /SKIP directive in wuident
    2013-03-27    18:38:26:002     868    934    Setup    SelfUpdate check completed.  SelfUpdate is NOT required.
    2013-03-27    18:38:26:440     868    934    PT    +++++++++++  PT: Synchronizing server updates  +++++++++++
    2013-03-27    18:38:26:440     868    934    PT      + ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, Server URL = https://fe1.update.microsoft.com/v6/ClientWebService/client.asmx
    2013-03-27    18:38:28:846     868    934    WS    WARNING: Nws Failure: errorCode=0x803d0014
    2013-03-27    18:38:28:846     868    934    WS    WARNING: Original error code: 0x80072efe
    2013-03-27    18:38:28:846     868    934    WS    WARNING: There was an error communicating with the endpoint at 'https://fe1.update.microsoft.com/v6/ClientWebService/client.asmx'.
    2013-03-27    18:38:28:846     868    934    WS    WARNING: There was an error receiving the HTTP reply.
    2013-03-27    18:38:28:846     868    934    WS    WARNING: The connection with the remote endpoint was terminated.
    2013-03-27    18:38:28:846     868    934    WS    WARNING: The connection with the server was terminated abnormally
    2013-03-27    18:38:28:846     868    934    WS    WARNING: Web service call failed with hr = 80240440.
    2013-03-27    18:38:28:846     868    934    WS    WARNING: Current service auth scheme='None'.
    2013-03-27    18:38:28:846     868    934    WS    WARNING: Proxy List used: '(null)', Bypass List used: '(null)', Last Proxy used: '(null)', Last auth Schemes used: 'None'.
    2013-03-27    18:38:28:846     868    934    WS    FATAL: OnCallFailure(hrCall, m_error) failed with hr=0x80240440
    2013-03-27    18:38:28:846     868    934    PT    WARNING: PTError: 0x80240440
    2013-03-27    18:38:28:846     868    934    PT    WARNING: SyncUpdates_WithRecovery failed.: 0x80240440
    2013-03-27    18:38:28:846     868    934    PT    WARNING: Sync of Updates: 0x80240440
    2013-03-27    18:38:28:846     868    934    PT    WARNING: SyncServerUpdatesInternal failed: 0x80240440
    2013-03-27    18:38:28:846     868    934    Agent      * WARNING: Failed to synchronize, error = 0x80240440
    2013-03-27    18:38:28:862     868    934    Agent      * WARNING: Exit code = 0x80240440
    2013-03-27    18:38:28:862     868    934    Agent    *********
    2013-03-27    18:38:28:862     868    934    Agent    **  END  **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2013-03-27    18:38:28:862     868    934    Agent    *************
    2013-03-27    18:38:28:862     868    934    Agent    WARNING: WU client failed Searching for update with error 0x80240440
    2013-03-27    18:38:28:862     868    598    AU    >>##  RESUMED  ## AU: Search for updates [CallId = {F6806137-9A32-4476-AF23-38B11881056E} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
    2013-03-27    18:38:28:862     868    598    AU      # WARNING: Search callback failed, result = 0x80240440
    2013-03-27    18:38:28:862     868    598    AU    #########
    2013-03-27    18:38:28:862     868    598    AU    ##  END  ##  AU: Search for updates  [CallId = {F6806137-9A32-4476-AF23-38B11881056E} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
    2013-03-27    18:38:28:862     868    598    AU    #############
    2013-03-27    18:38:28:862     868    598    AU    All AU searches complete.
    2013-03-27    18:38:28:862     868    598    AU      # WARNING: Failed to find updates with error code 80240440
    2013-03-27    18:38:28:862     868    598    AU    AU setting next detection timeout to 2013-03-27 12:38:28
    Ricky

    some more interesting article i've found so far
    http://practicalkungfu.net/2013/03/11/windows-update-error-code-8024402f-on-hyper-v-guests/
    http://faultbucket.ca/2012/08/windows-server-2012-windows-update-error-0x80240440/
    http://social.technet.microsoft.com/Forums/en-US/winserver8gen/thread/80548a4e-6c68-4700-a37b-9e22890bd8af
    Ricky

  • Windows update error 80072EFD

    Hi,
    I have a 2 month old P750 laptop, after needing to do a restore from a drive back up, I now get the error above.
    I then decided to do a toshiba recovery with a clean install and again get the same result of windows update not being able to connect to the server.
    I have tried everything I can find for this error including checking the proxy settings for WU, reseting the proxy settings via CMD prompt.
    I did notice something interesting while checking validation using the microsoft MGA diagnostic tool, where windows was listed as genuime but of note were some interesting reports like:
    Validation code : 0
    LegitCheckControl : N/A, hr=0x80070002
    signed : N/A, hr=0x80070002
    My understanding is the 0x80070002 means it couldn't connect the same as WU or that files are missing.
    I have rebuilt the softwaredistribution folders as recommended, disabled all firewalls, removed antivirus / malware software but still no luck.
    It seems funny how the same thing happens even after a clean toshiba disk recovery.
    Any suggestions?
    BL262000

    Hello
    If you check Google and error code 80072EFD you will find numerous pages where you can find explanations why should be done about that.
    This is typical Microsoft issue and solution must be searched by Microsoft.
    Have you checked
    http://windows.microsoft.com/en-GB/windows-vista/Windows-Update-error-80072efd or http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/windows-update-error-80072efd/398546d2-6b6d-47a0-b075-82d815fa9a8f ?

  • Windows 8.1 Update VLSC ISO windows update error

    I have a downloaded version of Windows 8.1 Update 1 from the VLSC and Windows Update fails after a clean install. I've installed it on different systems and multiple fail with the same error (80072EFE). The weird thing is that it works fine against our
    WSUS server just not checking online. There isn't anything blocking the connection to Windows Update so not sure what is going on.

    Hi,
    If you receive Windows Update error 80072efe or 80072f76 while checking for updates, it might be caused by a connection interruption between your computer and the Windows Update servers. You can run Windows Update Troubleshooter that will automatically find
    and fix some common problems with Windows update.
    Windows Update Troubleshooter:
    http://go.microsoft.com/?linkid=9830262
    In addition, please check your security application setting, such as firewall.
    Roger Lu
    TechNet Community Support

  • Windows Updates Error Codes 80070308 and 80070643

    Recently I have a problem with windows updates patches for this month (June 2014).  I updated 10 computers (at office), 9 of them have either the error codes 80070308 and/or 80070643.  I tried to disable the Symantec Endpoint, used the Microsoft
    .NET Framework Repair Tool to fix the .Net Framework related error but still have failure.  I can still finish all the failed patches by rescanning the PC than install them; however; I still have 40 PCs need to be patched.  How do I prevent
    the installation failure, all the PCs have no problem at last month.  Any suggestion, many thanks.

    Hi,
    If your computer is having problems finding and installing operating system update, I suggest to
    try the windows update troubleshooter.
    To run a Windows Update troubleshooter:
    http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter
    An automatic troubleshooter is available that fixes some problems with Windows Update, and it might resolve this error for you
    http://windows.microsoft.com/en-us/windows/troubleshoot-problems-installing-updates#1TC=windows-7
    this error can appear when installing updates for Microsoft Office 2003,
    to fix Windows update with error code:80070643:
    http://windows.microsoft.com/en-us/windows/windows-update-error-80070643#1TC=windows-7
    If your computers are in a domain environment and get updated by a WSUS server, I suggest to update the group policy with the command “gpupdate /force”.
    Meanwhile, if it doesn’t help, please upload the Windowsupdate.log at: C:\Windows, this will give detail error information for further support.
    Regards
    Wade Liu
    TechNet Community Support

  • WINDOWS UPDATE ERROR, SERVICE ERROR, ETC. PLEASE HELP!!

    Problems Found:
    Some security settings are missing or have been changed. 
    Service registration is missing or corrupt
    Windows Update Error 0x80070057(2014-07-16-T-03_16_19P)
    Problems installing recent updates 
    I have literally tried everything I can and its just getting even more upsetting :(
    Im running an ASUS w/ Windows 8.1 and cannot find the solution for the following....
    It seems to me, like I have never gotten any updates that I need... only download it gives me is the windows defender update. I've tried resetting the windows update did a health scan no bad sectors. 
    PLEASE HELP!

    Problems Found:
    Some security settings are missing or have been changed. 
    Service registration is missing or corrupt
    Windows Update Error 0x80070057(2014-07-16-T-03_16_19P)
    Problems installing recent updates 
    I have literally tried everything I can and its just getting even more upsetting :(
    Im running an ASUS w/ Windows 8.1 and cannot find the solution for the following....
    It seems to me, like I have never gotten any updates that I need... only download it gives me is the windows defender update. I've tried resetting the windows update did a health scan no bad sectors. 
    PLEASE HELP!

  • Windows update error code 8e5e0147 help!

    I get the error code 8e5e0147 from windows update while trying to do 8 different updates. ive tried doing different things to fix this that I find online but nothing has help, can someone please help fix this?

    Please review this previous post:
    Cannot install some Windows updates, error code 8e5e0147
    Carey Frisch

  • Windows Update error code 8024402C

    I've been having this problem for months and I can't make any updates so please solve my problem, I went to your website about that problem and it still doesn't solve my problem, I would really appreciate if you could solve it thank you in advance.
    PS: I'm using window 7 64bit if that can help.

    Hi,
    About Windows Update error
    8024402C, please refer this article from Microsoft:
    http://windows.microsoft.com/en-US/windows7/Windows-Update-error-8024402C
    If it doesn’t help, please temporally disable firewall and antivirus program and update again.
    If the issue persists, you can try to reset Windows Update components for test:
    http://support.microsoft.com/kb/971058
    Hope that helps.
    Regards,
    Leo  
    Huang
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Maybe you are looking for

  • Issue with rendering ProRes back to Premiere

    I'm rebuilding my workflow since upgrading to CS 6, and am running into a problem with the files generated by Speedgrade. Running on MBP with most up-to-date software (Adobe + Apple), ProRes codecs installed via Apple Compressor. The workflow I'm try

  • IPod stop to work by itself

    Hello, I have an iPod Touch second generation, 8 GB (but I have only used 3GB) since 16 months. I have enjoyed my iPod and the facilities it offer.  I have noticed that my iPod has not working as it usually does.  It is too slow, and when I use it to

  • Apple Menu Logo Changes Colors

    I've been trying to figure out why the Apple Logo on he menu bar changes color, seemingly at random, starting from the dark gray of graphite theme, then cycling through reds, oranges, yellows, etc--sometimes multicolored. I've never played around wit

  • How to pass parameters from Forms to Reports

    dear all, i'm running a report from a form using run_product(), now i want to pass a parameter from a form to report, say i want to display all the employees of deptno=10, so what parameter should i give in run_product() and what modifications should

  • Re: Abrazadera dinámica para montaje de dos monitores en escritorio de KONTOUR

    Buenos dias a todos: Alguien me puede indicar si la abrazadera dinámica para dos monitores en escritorio de KONTOUR que se vende en el Appel Store, puede con dos iMac de 27". O si alguien sabe otro producto similar, le agradeceria me indicara marca y