Windows Update for Cisco ACS appliance

Due to the recent security alert from Windows I wish to make sure my systems are updated, but the cisco ACS appiance (cisco 1113) runs a specialized version of win2k with console access disabled. Is there any way get the windows critical security updates, and do I need to?

If the patch is necessary on acs appliance then they will be releasing it soon.
As of now we can't apply any windows patch on appliance.

Similar Messages

  • Print Management Console displays no printers after applying Windows Update for Windows Server 2012 R2 (KB2995388)

    After installing optional Windows Update for Windows Server 2012 R2 (KB2995388) on a print server upgraded from Windows 2012 to Windows 2012 R2, the Print Management Console wouldn't display locally shared or remotely shared printers. Another print server
    could see the printers on this server, but it couldn't see it's own. Removal of the patch resolved the issue.

    Hi,
    à
    Removal of the patch resolved the issue.
    Thanks for sharing in the forum. Your time and efforts are highly appreciated.
    On current situation, would you please let me confirm something more?
    Please check if this update rollup package (KB2995388) install successfully.
    Please run sfc /scannow command to scan all protected system files after installed this update.
    If be possible, please re-install Print Server feature on the server after installed this update. Any find?
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • How to install KB 3008925 windows update for Adobe flash player

    I have tried many times to install KB 3008925 Windows Update for Adobe Player in my HP PC with Windows 8.1 It refuses to get installed. Error message OX800704c7.Please help
    T.N

    Hi there,
    Sorry you are having problems installing the KB from Microsoft.  Since it is a Microsoft update, as opposed to an Adobe update, please ask your question in an appropriate Microsoft forum (answers.microsoft.com).  Hopefully someone from Microsoft will be able to provide better assistance regarding their error codes/messages.
    Maria

  • Windows updates for Lenovo? what is it?

    Hi,
    I have just found some Windows updates in the section "Drivers and Software" for x230.
    http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT073834
    section: Windows Update
    for example
    Windows 7 (32-bit, 64-bit) Update Module KB2482122
    Windows 7 (32-bit, 64-bit) Update Module KB2615763
    I have checked in my windows 7 Installed Updates - I do not have these updates installed.
    My WIndows is reporting that it UP TO DATE.
    So, what do mean these updates? Should they be installed?

    Hello,
    These are hotfixes for the operating system released by Microsoft.  Not every hotfix released by Microsoft is distributed through Microsoft Update.  Sometimes, it is an issue which only affects a small fraction of computers out there, an issue may only occur in rare circumstances, and so forth. Here are the actual articles from Microsoft's support site:
    Microsoft Knowledgebase Article #2482122, "0x0000009F" Stop error when you restart a Windows 7-based or Windows Server 2008 R2-based computer ...
    Microsoft Knowledgebase Article #/2615763, "0x000000D1" Stop error when you connect a USB composite device to a computer that is running Window...
    From reading their descriptions, plus the fact that you saw them listed on Lenovo's web site, makes me think that your model's installation of Microsoft Windows may be susceptible to the described problems.
    You can try downloading the files and installing them.  If a problem occurs, you can uninstall the hotfix, or use System Restore to revert the computer to an earlier state before the hotfixes were installed.
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Problem getting windows updates for windows 7

    hi,
    I am using windows 7 beta version. I have problem getting windows updates for my windows 7. When i click on check updates error code 80072F8f occurs. The same goes to any windows application like Live Mail, Live Messanger and i can't even activate my windows 7. But i can use IE8 and other external applications like Yahoo Messanger and my Avast antivirus can even update itself. Just that windows application can't connect to internet for updates. Help me please.
    Thank You.
    Regards,
    Thilek

    On January 13, Microsoft ends support for the Windows 7 Service Pack (SP) 1. No need to panic. That does not mean your computer with Windows 7 is going to automatically break or stop working. Though the
    Extended Support for Microsoft product with free security update is not ending until Jan 14, 2020 comes.
    If you want to know more of this, then go through http://techyuga.com/microsoft-ends-support-for-windows-7/

  • Disable USB driver installation from searching Windows Updates for software

    Hello,
    When a plug-n-play device is connected to a Windows 7 system, the system by default tries to search Windows update for compatible drivers.  I have a preconfigured driver store on each system that will have the drivers for all of the USB devices we care
    about so I'd like to search the local driver store first before searching for Windows updates.  
    I found the option that controls this under System Properties > Advanced system settings > Hardware tab > Device Installation Settings.  I have set this option before my machines run through sysprep, however, sysprep appears to be resetting
    the option back to the Windows default (Yes, do this automatically) and ignores what I set it to.
    I have a reg key that I'm running post-sysprep, but I'd like to avoid this as it's an extra step and I don't want to have to account for it long-term.  My question is, is there a way to set this option in my sysprep unattend file?  

    If this is a domain joined machine, this can be set by a Group Policy Object;
    Open Group Policy Management Editor.
    In the navigation pane, open Computer Configuration\Administrative Templates\System\Internet Communication Management\Internet
    Communication settings.
    In the details pane, double-click Turn off Windows Update device driver searching.
    Do one of the following:
    To turn off searching Windows Update, click Enabled.
    To allow searching Windows Update, click Disabled.
    Click OK to save your settings.
    Instructions taken from: http://technet.microsoft.com/en-us/library/cc730606(v=ws.10).aspx
    If this PC is not on the domain (but is Pro) you may be able to set the same option on the Local Group Policy (GPEDIT.MSC).
    Kind Regards
    Barry

  • Got Display driver via Windows Update for Windows 8.1 and try to use it for Windows Server 2012 R2

    Hi Everyone,
    the following driver cab is from Windows Update:
    https://onedrive.live.com/?cid=5be01620eea95d8c&id=5BE01620EEA95D8C!138&ithint=file,.cab&authkey=!APDi54-R1Ob5IWQ
    It includes this display driver:
    Intel(R) Q45/Q43 Express Chipset (Microsoft Corporation - WDDM 1.1)
    My problem is: I can't install this driver on Windows Server 2012 R2.
    I tried the following, nothing worked:
    a) pnputil -i -a intel.cab
    b) Extract cab, update the device's driver in device manager, select "search for driver software in this location"
    c) copy the files in system32/, system32/drivers, syswow64/ from a Windows 8.1 system to a Windows Server 2012 R2 system
    Isn't it true that any Windows 8.1 driver should also work for Windows Server 2012 R2 (same os version)?
    Thanks for your replies.
    PS: I first posted my question here:
    http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/got-display-driver-via-windows-update-for-windows/31c287c8-ef84-4c81-8530-8c51412376b7

    Hi,
    Additionally, did you check this article?
    http://www.driveridentifier.com/scan/download.php?item_id=90475670&scanid=9B44546E3BB9410D877D9A90D1439AF8&hardware_id=PCI%5CVEN_8086%26DEV_2E12
    Regards.
    Vivian Wang

  • Integrating windows AD with cisco ACS

    hi all i am looking for the requirements and any documents in setting up the acs with windows AD for user authentication.
    i am basically testing this.
    i am having a cisco switch a switch acs serevr 4.1 and windows xp host and windows 2003 server.
    can someone pls tell me the procedure for this on the acs and the AD.
    any help would be appreciated.
    regards
    sushil

    hi thanks for the link.
    but can u tell me when installing the acs where it asks for slecting the database the acs only or the windows database should we select the windows database.
    so when we are configuring the acs for 802.1x authentication and authorisation.
    we should select the create the users as in the AD right.but the password for them should be redirected to the AD right.
    can u pls guide me on this.
    regards
    sushil

  • Cisco aironet 1130g and windows 2003 with cisco ACS

      hi
    i  have configured windows 2003 server with  DNS ,Active directory users and dhcp server.  and configured my cisco 1130g AP .
    i have installed cisco access control server 4.0 because i use LEAP authentication protocol and for the ACS for network configuration i give aaa client ip addresss as AP interface ip and  same shared secret for the AP and ACS,.
    so  when i log to wifi it ask username and password
    problem is lap top cannot have a ip address my dhcp server not issue any ip address .
    my hiper terminal massage is like this when i connect to wifi 
    help ...thank you...

    As I mentioned now several times already, it is the client and ACS which do the PEAP. The Access point doesn't have to be configured for an eap type. What you did on the AP was setting the AP as a radius server which is duplicate work with what you did on ACS.
    So you need on your client to configure either PEAP or LEAP.
    Nicolas

  • Signatur updates for Cisco IPS 4510

    Hi there.
    I one question to all cisco IDS/IPS professionals. If the management port only accept inbound traffic how can I then activate my Cisco 4510 IPS appliance to get automatically signature updates from cisco.com ? That one requires outbound traffic too. 
    Thanks.

    You Management0/0-port only supports "to-the-box" traffic which means that you can't use that port for an inline pair or a vlan-pair. But with the IP on that port configured, you can not only connect to your sensor, the sensor can also initiate connection to the rest of the network and so you can reach your update-destionations.
    Don't stop after you've improved your network! Improve the world by lending money to the working poor:
    http://www.kiva.org/invitedby/karsteni

  • AV update & windows update for NAC environment

    Hi all
    If user-company already has their own "Anti-Virus Server" or "Windows-update Server", can CAM refer to their servers(not Cisco's policy-update-server) to get current update files?
    waiting your replies
    regards

    The below URL describes how to configure the Antivirus (AV) Definition Update requirements in the Cisco Network Admission Control (NAC) Appliance, formerly known as Cisco Clean Access.
    http://www.cisco.com/en/US/products/ps6128/products_configuration_example09186a00808a50c5.shtml#conf

  • Install optional driver updates from Windows Update for IdeaPad Yoga 13?

    Windows Update on IdeaPad Yoga 13 - Windows 8.1 (64-bit) suggests two optional updates:
    Conexant - Audio Device - Conexant SmartAudio HD
    10.01.2014
    Intel Corporation - Graphics Adapter WDDM1.1, Graphics Adapter WDDM1.2, Graphics Adapter WDDM1.3 - Intel(R) HD Graphics 4000
    Intel Corporation Graphics Adapter WDDM1.1, Graphics Adapter WDDM1.2, Graphics Adapter WDDM1.3 software update released in May, 2014
    04.06.2014
    Should I install those updates or should I keep the original drivers?
    The original drivers from Lenovo "Drivers and software" section (http://support.lenovo.com/de_DE/downloads/detail.page?DocID=DS032590) seem to be older/outdated:
    Conexant Audio Driver for 64-bit Windows 
    8.65.3.53 10/22/2013
    Integrated Graphics Driver for 64-bit Windows
    Windows 8.1 (64-bit)
    9.17.10.2843 10/23/2012
    Intel Video Driver for 64-bit Windows
    10.18.10.3282 10/22/2013

    Windows Update has now another update for "Intel Corporation Graphics Adapter WDDM1.1" and still no updates on the Lenovo site.
    So I tried the the drivers from Windows Update and it seems that every thing is still working fine.

  • Windows Updates for SharePoint 2013 Environment

    Hi
    I created a visual machine for SharePoint 2013 development by following steps mentioned below.
    --Install Winows Server 2008 R2
    --SQL Server 2008 R2
    --SP2 for SQL Server 2008 R2
    --SP1 for Winows Server 2008 R2 
    --Sharepoint 2013 Pre-Requisites
    --Sharepoint 2013 Setup
    --Sharepoint 2013 Designer
    --Installed March and August 2013 Cumulative Updates for SharePoint 2013
    --Installed SP1 for SharePoint 2013
    I want to ask do i need to install Windows Updates after installing different updates as i mentioned above because everty now and then windows updates message keep pops up and i did'nt install windows updates yet.
    Why is it necessary or what impact window updates would have on my environment if i need to do it??

    Windows Updates cover security updates as well as stability improvements, and so on. You're simply patching SharePoint and SQL in the above case.
    It should be noted that any SharePoint patches that come down through Windows Update need to be manually handled as you'll need to run the Config Wizard (e.g. MS14-022 and MS14-050 which are SharePoint updates).
    When you're installing SharePoint 2013, you only need to install SP1 if that is your target. There is no requirement to install March 2013 or August 2013.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Enable Microsoft Update (not just Windows Update) for Windows 2008 R2

    I am running Windows 2008 R2 in my Citrix XenApp 6.5 farm.
    Office 2013 is installed.
    I can't update Office via Windows Update. Why? Take a look at this ridiculous roundabout tautology it takes me through.
    Here I am in the Windows Update panel:
    If I click "Find out more" to get updates for other Microsoft Updates it takes me here:
    Yeah, duh, I was just in there when I clicked the link to get to this site. What's the deal?
    How does one enable all Microsoft Updates for a Windows 2008 server. I can do this in 2003 easily by going to the Microsoft Update website. 2008 however, this appears to be impossible and apparently no one else in the world has noticed this.

    these discussions should help:
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/80fa1086-3fd2-4bdd-a3bd-9af11c3d555b/can-i-force-windows-update-to-receive-updates-for-windows-and-other-products-using-group-a-policy?forum=winserverGP
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/c4f629fe-c447-4724-a3d9-e891ada9f334/windows-7-windows-update-get-updates-for-other-microsoft-products?forum=winserverGP
    http://social.technet.microsoft.com/Forums/windows/en-US/153b7ba7-e5b5-4c3a-af07-23c7980f79ea/cant-get-windows-update-to-download-updates-for-other-ms-products?forum=w7itproinstall
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • How to run Windows update for Win XP SP3 using Firefox

    My desktop PC is running windows XP with SP3. My spouse uses IE 8 for her browser. I use Firefox Version 24. for my browser. Previously, whenever we ran MS or Windows update it starts IE and runs fine. IE 8 has blown up and no longer works (Runtime Errors). I tried to go to the Windows update website using Firefox and it came back and told me that I had to use IE to run Win update on an XP system. Is this true? I don't want to use IE at all. Is there a way to use Firefox to run Windows or MS update on my Win XP system? Thank you.

    Thanks for your help. That is not what I wanted to hear so I will have to try to get IE 8 working again. How do other folks do updates? Does this mean that IE is absolutely necessary to maintain your windows system? Is this true for the newer versions of Windows, 7 or 8?

Maybe you are looking for

  • Disable attachment option in Mail

    For security reasons, I would like to disable the attachment option in the Mail app in iPhone to prevent any data leakages. Is there such in-built capability or option where I can enforce such policy?

  • Which role, profile for monitoring adapter & messages in Runtime Workbench?

    Hi guys, let mi pls know, which one is needed. Thanx! Olian

  • What's changed in Photoshop 12.1?

    I recently upgraded my CS5 design premium to version 5.5-- by uninstalling to previous version and clean installing the new-- and have noticed that the updated version of Photoshop (12.1) performs very slowly overall compared to that which installed

  • Adobe Lightroom app won't open

    I signed up for adobe cloud after my free trial of lightroom expired.  I downloaded Lightroom and Photoshop and can not get either one to open.  I can find the app on my computer, but when I try to open lightroom it goes back to the free trial start

  • Error occuring when installing Tiger

    Hello, I've been trying to install Tiger onto a friends Gigabit Ethernet G4 (Dual 450) and I keep experiencing an error during the install. Would a bad HD make this happen? His machine has both the original HD and a new Maxtor HD in it. I've run Disk