Windows Update for Security Essentials causes FDF-PDF network opening a file error:Access Denied

We open PDF files on mapped network drives, using FDF forms with fields. The latest Windows Update (12/15/14) KB2310138 is now causing the Adobe Reader application to say "Access Denied". I know it is the update for sure. I have one computer WITH the update that gets the error, another without that doesn't. If I change the "/F" reference in the FDF to use a local "C:" copy of the PDF, there is no error message.
Cannot undo the Windows Update. Although it shows on the history list, when I go into "Installed Updates" to undo it, it is not listed there.
Help!

Hi,
Are you still facing this issue?
Regards,
Ajlan Huda.

Similar Messages

Ask your question.Can't render get File error access denied. Whats causing this? FCP 7.0.3

I Can't render get File error access denied. Whats causing this? FCP 7.0.3

Its an was update from an earlier version.
What earlier version?
And you're saying when you using File>Import>File and select a JPEG you get the error message?
You can't or shouldn't import MP3s into FCP.
Have you try creating a new porject and importing into that?

I installed windows 7 recently and also Adobre reader XI, and now I cannot open any of my previously created pdfs. Every time I get the message: Error opening the file. Access denied. What is going on?

Recently I had to install windows 7 in my notebook because XP doesn't have more support. Before installing I backed up all my files to my external HD. Now that I instaleed windows 7 and also installed Acrobat Reader XI, I just cannot open any of my pdf files created prior to installing windows 7.
Looking for help online, I found the solution of security and giving me access as an administrator to all my files, but it still keeps the same...
Can some one please help me out?? I really need to work on many of this files ASAP.
Thank you all in advance for you attention,
Best,
Henrique

Can you start Adobe Reader?

Windows Updates for SharePoint 2013 Environment

Hi
I created a visual machine for SharePoint 2013 development by following steps mentioned below.
--Install Winows Server 2008 R2
--SQL Server 2008 R2
--SP2 for SQL Server 2008 R2
--SP1 for Winows Server 2008 R2
--Sharepoint 2013 Pre-Requisites
--Sharepoint 2013 Setup
--Sharepoint 2013 Designer
--Installed March and August 2013 Cumulative Updates for SharePoint 2013
--Installed SP1 for SharePoint 2013
I want to ask do i need to install Windows Updates after installing different updates as i mentioned above because everty now and then windows updates message keep pops up and i did'nt install windows updates yet.
Why is it necessary or what impact window updates would have on my environment if i need to do it??

Windows Updates cover security updates as well as stability improvements, and so on. You're simply patching SharePoint and SQL in the above case.
It should be noted that any SharePoint patches that come down through Windows Update need to be manually handled as you'll need to run the Config Wizard (e.g. MS14-022 and MS14-050 which are SharePoint updates).
When you're installing SharePoint 2013, you only need to install SP1 if that is your target. There is no requirement to install March 2013 or August 2013.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Problem getting windows updates for windows 7

hi,
I am using windows 7 beta version. I have problem getting windows updates for my windows 7. When i click on check updates error code 80072F8f occurs. The same goes to any windows application like Live Mail, Live Messanger and i can't even activate my windows 7. But i can use IE8 and other external applications like Yahoo Messanger and my Avast antivirus can even update itself. Just that windows application can't connect to internet for updates. Help me please.
Thank You.
Regards,
Thilek

On January 13, Microsoft ends support for the Windows 7 Service Pack (SP) 1. No need to panic. That does not mean your computer with Windows 7 is going to automatically break or stop working. Though the
Extended Support for Microsoft product with free security update is not ending until Jan 14, 2020 comes.
If you want to know more of this, then go through http://techyuga.com/microsoft-ends-support-for-windows-7/

Does Windows Update (for Windows 8 at least) update the MBR and, if so, how?

I ask because I've learned (the hard way) that if you use software that locks the mbr (in my case Rollback RX), then after performing a windows update, sfc /scannow will tell you that nearly all the updated files are "corrupt". Conversely, if I
perform the same exercise without Rollback installed, I get no errors or corruptions.
I speculate that the update must be doing something similar to what is supposed to happen in the TCM scheme, with a hash table or something similar held in the mbr, which gets updated at the time of the windows update, to store the signatures of the revised
system files or whatever, so that the system can verify file integrity as it loads them during the boot.
But I can find no evidence to support my speculation. Clearly something like that must be happening or we wouldn't see the alleged corruptions when using a locked mbr.
Any ideas?

Hi,
According to your description, You Windows update installation corruption obviously caused by
Rollback RX. But that does not mean Windows update installation is relate with MBR. It is probably this software had a compatibility problem with Windows 8. I would like to recommend you to contact
the vendor of this software to verify the compatibility of this software.
MBR:
the most important data structure on the disk, is created when the disk is partitioned. The MBR contains a small amount of executable code called the master boot code, the
disk signature, and the partition table for the disk. At the end of the MBR is a 2-byte structure called a signature word or end of sector marker, which is always set to 0x55AA. A signature word also marks the end of an extended boot record (EBR) and the boot
sector.
You can refer to the link below for more information about MBR:
http://technet.microsoft.com/en-us/library/cc976786.aspx
Roger Lu
TechNet Community Support

Firefox recommends I update for security reasons, when I click to download the update, it says "connecting to server" indefinitely.

Firefox recommends that I update for security purposes. I click to begin downloading the update and then a "downloading update" window opens. It says "connecting to server" indefinitely and nothing ever happens. I would love to perform any updates recommended but it would be nice if they actually did something.

* Download a new copy of the Firefox program
* Firefox 3.6: http://www.mozilla.com/en-US/firefox/all-older.html
* Firefox 4.0: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Print Management Console displays no printers after applying Windows Update for Windows Server 2012 R2 (KB2995388)

After installing optional Windows Update for Windows Server 2012 R2 (KB2995388) on a print server upgraded from Windows 2012 to Windows 2012 R2, the Print Management Console wouldn't display locally shared or remotely shared printers. Another print server
could see the printers on this server, but it couldn't see it's own. Removal of the patch resolved the issue.

Hi,
à
Removal of the patch resolved the issue.
Thanks for sharing in the forum. Your time and efforts are highly appreciated.
On current situation, would you please let me confirm something more?
Please check if this update rollup package (KB2995388) install successfully.
Please run sfc /scannow command to scan all protected system files after installed this update.
If be possible, please re-install Print Server feature on the server after installed this update. Any find?
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

How to install KB 3008925 windows update for Adobe flash player

I have tried many times to install KB 3008925 Windows Update for Adobe Player in my HP PC with Windows 8.1 It refuses to get installed. Error message OX800704c7.Please help
T.N

Hi there,
Sorry you are having problems installing the KB from Microsoft. Since it is a Microsoft update, as opposed to an Adobe update, please ask your question in an appropriate Microsoft forum (answers.microsoft.com). Hopefully someone from Microsoft will be able to provide better assistance regarding their error codes/messages.
Maria

Windows updates for Lenovo? what is it?

Hi,
I have just found some Windows updates in the section "Drivers and Software" for x230.
http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT073834
section: Windows Update
for example
Windows 7 (32-bit, 64-bit) Update Module KB2482122
Windows 7 (32-bit, 64-bit) Update Module KB2615763
I have checked in my windows 7 Installed Updates - I do not have these updates installed.
My WIndows is reporting that it UP TO DATE.
So, what do mean these updates? Should they be installed?

Hello,
These are hotfixes for the operating system released by Microsoft. Not every hotfix released by Microsoft is distributed through Microsoft Update. Sometimes, it is an issue which only affects a small fraction of computers out there, an issue may only occur in rare circumstances, and so forth. Here are the actual articles from Microsoft's support site:
Microsoft Knowledgebase Article #2482122, "0x0000009F" Stop error when you restart a Windows 7-based or Windows Server 2008 R2-based computer ...
Microsoft Knowledgebase Article #/2615763, "0x000000D1" Stop error when you connect a USB composite device to a computer that is running Window...
From reading their descriptions, plus the fact that you saw them listed on Lenovo's web site, makes me think that your model's installation of Microsoft Windows may be susceptible to the described problems.
You can try downloading the files and installing them. If a problem occurs, you can uninstall the hotfix, or use System Restore to revert the computer to an earlier state before the hotfixes were installed.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Disable USB driver installation from searching Windows Updates for software

Hello,
When a plug-n-play device is connected to a Windows 7 system, the system by default tries to search Windows update for compatible drivers. I have a preconfigured driver store on each system that will have the drivers for all of the USB devices we care
about so I'd like to search the local driver store first before searching for Windows updates.
I found the option that controls this under System Properties > Advanced system settings > Hardware tab > Device Installation Settings. I have set this option before my machines run through sysprep, however, sysprep appears to be resetting
the option back to the Windows default (Yes, do this automatically) and ignores what I set it to.
I have a reg key that I'm running post-sysprep, but I'd like to avoid this as it's an extra step and I don't want to have to account for it long-term. My question is, is there a way to set this option in my sysprep unattend file?

If this is a domain joined machine, this can be set by a Group Policy Object;
Open Group Policy Management Editor.
In the navigation pane, open Computer Configuration\Administrative Templates\System\Internet Communication Management\Internet
Communication settings.
In the details pane, double-click Turn off Windows Update device driver searching.
Do one of the following:
To turn off searching Windows Update, click Enabled.
To allow searching Windows Update, click Disabled.
Click OK to save your settings.
Instructions taken from: http://technet.microsoft.com/en-us/library/cc730606(v=ws.10).aspx
If this PC is not on the domain (but is Pro) you may be able to set the same option on the Local Group Policy (GPEDIT.MSC).
Kind Regards
Barry

Got Display driver via Windows Update for Windows 8.1 and try to use it for Windows Server 2012 R2

Hi Everyone,
the following driver cab is from Windows Update:
https://onedrive.live.com/?cid=5be01620eea95d8c&id=5BE01620EEA95D8C!138&ithint=file,.cab&authkey=!APDi54-R1Ob5IWQ
It includes this display driver:
Intel(R) Q45/Q43 Express Chipset (Microsoft Corporation - WDDM 1.1)
My problem is: I can't install this driver on Windows Server 2012 R2.
I tried the following, nothing worked:
a) pnputil -i -a intel.cab
b) Extract cab, update the device's driver in device manager, select "search for driver software in this location"
c) copy the files in system32/, system32/drivers, syswow64/ from a Windows 8.1 system to a Windows Server 2012 R2 system
Isn't it true that any Windows 8.1 driver should also work for Windows Server 2012 R2 (same os version)?
Thanks for your replies.
PS: I first posted my question here:
http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/got-display-driver-via-windows-update-for-windows/31c287c8-ef84-4c81-8530-8c51412376b7

Hi,
Additionally, did you check this article?
http://www.driveridentifier.com/scan/download.php?item_id=90475670&scanid=9B44546E3BB9410D877D9A90D1439AF8&hardware_id=PCI%5CVEN_8086%26DEV_2E12
Regards.
Vivian Wang

Just downloaded Yosemite on my Mac and the Yosemite update for Garage Band. Now when I open an existing Garage Band project and click on a vocal track, a message window says, "Could not find General Audio 10" and have no smart controls. Help?

Just downloaded Yosemite on my Mac and the Yosemite update for Garage Band. Now when I open an existing Garage Band project and click on a vocal track, a message window says, "Could not find General Audio 10" and have no smart controls for that track (reverb, etc.) Help?

Try this fix posted by Robinson Collins:
Re: I downloaded Garage Band 2x and the same note appears: there is no General Audio 10. Please advise. Thank you.
Try this: Go to your menu bar, select "Garageband" and then "Restore Sound Library..."
It can take awhile to download as it's a pretty big library. You might need to also select "Update Sound Library..." after the restore is done.

I just downloaded the new update for itunes and the itunes store wont open up it is taking a long time it still hasnt loaded since 5pm

i just downloaded the new update for itunes and the itunes store wont open up it is taking a long time it still hasnt loaded since 5pm, i also cant sighn in either it just keeps on saying accessing itunes....

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

When downloading updates for Quicktime 7 and Itunes 10 I keep getting an error saying that files shared by these updates has an invalid signature and that the downloaded has been removed.

When downloading updated for Quicktime 7 and Itunes 10 I keep getting an error saying that files shared by these updates has an invalid signature and that the downloaded has been removed. If I don't get that message I get a message saying that the download was unsuccesful and that in order to download I need to go to tools and then select dowload only. Please help I really want to update my iphone!

Thanks for helping out, but I already tried these steps.
I even tried this on a iMac with similar results. The only difference was that the errorcode was called 2001 instead of 21.
Today I took the phone to www.iphoneambulancen.dk. A guy (in Aarhus, Denmark) that specializes in iPhone repairs. I figured, that given his occupation he'd seen most errorcdes. Two hours later, he called me back, and told me that he had replaced the battery.
So, it turns out that a broken battery can cause this behaviour.
But thanks again

Windows Update for Security Essentials causes FDF-PDF network opening a file error:Access Denied

Similar Messages

Maybe you are looking for