Windows Update is not available in Control Panel

Hi.
I upgraded Windows 10 ETP 9926 to 10041 and Windows Update disappeared from the Control Panel.
How to add it back? I made a lot fo restarts, but nothing has changed.

Hi Lukas,
In 9926, if you changed the regedit value you could display the windows update in the old control panel.
See these steps:
Enable Windows Update in Control Panel - Windows 10 Build 9926
In 10041, this will also show the windows update in the old control panel but I have had problems checking for windows update. When I disabled the windows update from the old control panel, my windows update started running normally. So I guess, they have
finally blocked checking updates the old way.
Hope this helps..

Similar Messages

  • Dv8-1100 touch pad control not available via control panel

    I can not change the sensitivity of the touch pad. The touch pad option do not show in ctnl panel.
    This question was solved.
    View Solution.

    Hi,
    First, download the latest Synaptics driver installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45019.exe
    Next, open windows Control Panel, open Programs and Features and if you see the entry 'Synaptics Pointing Device Driver', right click it and select Uninstall.
    If you did need to uninstall this, restart the notebook.
    When windows has fully reloaded, or if you didn't need to uninstall an existing Synaptics application, open your Downloads folder, right click the Synaptics installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook again.
    You should now find the settings you require if you open windows Control Panel, open Mouse, click the Device Settings tab and then click the settings button.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Windows installer package not running or installing properly error when i try to install and update to the new icloud control panel.

    i get a windows installer package not running or installing properly error when i try to install and update to the new icloud control panel.

    Okay ... so it's not one of the cases of bodged up ACLs on the Apple folder in Common Files. (That's been underlying a few of the recalcitrant E7W5s.
    Just in case, let's try the fixit from the following document:
    Fix problems with programs that can't be installed or uninstalled

  • My ipod 6th generation does not show in control panel on computer Windows 7.....also when I try to download from itunes, I get message network cannot make connection.  can you provide me help?

    My ipod 6th generation does not show in control panel on computer Windows 7....also when I try to download from itunes, I get message saying network cannot make connection.  Can you help me with these issues?

    Hello jrsmallwood,
    I've a couple of articles that should get you back on your way!
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/TS1369
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Cheers,
    Allen

  • On my computer, windows xp home, firefox icon does not appear in control panel, therefore i cannot remove it. i want to remove firefox how do i remove it?

    I just want to remove firefox but cannot do so as the icon does not appear in control panel

    It should be listed as "Mozilla Firefox"
    *See --> https://support.mozilla.com/en-US/kb/uninstalling%20Firefox
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • Change the default country code for new contacts in Outlook 2013 for countries not listed in Control Panel Region Format

    Dear all,
    I would like to change the default country code for new Outlook 2013 contacts. My country is Mozambique (+258) and is not listed under Control Panel> Region> Formats> Format:
    Is there any place (registry maybe, anywhere) where I can manipulate the existing formats or manually add a new format to the List ??? - for example Portuguese (Mozambique).
    I am using Windows 8.1
    I have tried changing the country on the phone and modem options and nothing changes. Also changing the Home Location on Region> Location to Mozambique didn't change a thing. The only place where I change something and produces results is the
    Format List.
    Any ideias???? If not, is there a place where I can ask Microsoft to include Portuguese (Mozambique) on future windows updates???
    Kind regards,
    Osvaldo

    Hi,
    Windows uses the information set under
    'Phone and Modem'  in the Control Panel to determine the default area code.
    You can change the country/region to
    Mozambique
    and set your area code here:
    Regards,
    Steve Fan
    TechNet Community Support

  • I can't update my iPhoto. "Update is not available for this Apple ID".

    Updating my iPhoto has always been a problem.  When I try, I get the error of: "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled."
    This is the only apple ID I have ever owned, and now that I updated my Mac with the new software, I can't even OPEN iPhoto anymore. Now I can't view any of my photos and I am not a happy camper..
    How can I fix this problem?????
    Thanks in Advance!

    Contact App Store support. There's a link on the right hand side of the App Store Window. They're the only ones who can sort out account issues.

  • I upgraded to iOS x mavericks on my iMac now i cannot access my iPhoto i get this messageThis update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.

    I upgraded to iOS x mavericks on my iMac now i cannot access my iPhoto i get this messageThis update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. I have not changed anything thankyou for any info.

    Please test after each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes. Keep in mind that no one here represents Apple or can help with customer-service issues.
    Step 1
    A purchased app can only be updated by signing in to the App Store with the same Apple ID that was originally used to buy it. There's no way around that limitation, which also applies to free apps. If you can't sign in with the buyer's ID, delete the app and reinstall it. You'll have to pay for it again, if applicable.
    Step 2
    If you get the alert when trying to update a bundled iLife app, elect the Purchases page in the App Store and locate the app in your purchase history. If there's a button marked ACCEPT on the right, click it.
    If you have a used Mac, the bundled apps were linked to the original owner's Apple ID and can't be transferred to you. Reportedly, customer service has issued redemption codes to some second owners who asked, but it's not guaranteed.
    Step 3
    If you're trying to update iLife or iWork apps that were installed from a purchased DVD, or if you have a refurbished Mac bought directly from Apple, contact App Store customer service for a redemption code. You may be asked for the part number of the DVD.
    Step 4
    From the App Store menu bar, select
    Store ▹ View My Account
    Enter your Apple ID password at the prompt. At the lower right corner of the window that opens, click the Reset button. Close the window.
    See also: remove app
    Keywords: refunded canceled

  • Itunes will not install..windows INSTALLER service not available.windows 7

    I am trying to find a fix for this...just bought a new computer with windows 7, all updates have been performed. Itunes will not install...it just stops and says "windows installer service not available" Can't find a stand alone downloadable version of installer 5.0 which is what comes with 7 from the research I have done. I have the newest version of itunes saved on desktop, tried running it from desktop, tried running as admin, tried several other ideas that I found on here and Microsoft..but nothing is working. Any advice?
    Message was edited by: ehindahl

    Same error message "This version is for a 32 bit computer, yours is a 64 bit!"
    Doublechecking ... by any chance did you migrate a 32-bit version of the iTunes, Apple Mobile Device Support and Bonjour programs to the 64-bit machine from a 32-bit machine using the PC Mover utility?
    (Your symptoms are consistent with that ... the installer service throws the message when trying to uninstall the 32-bit itunes and related 32-bit componentry prior to installing the new 64-bit versions.)

  • After installing yosemite iphoto does not open keep getting message"This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.

    I upgraded to yosemite iphoto does not open keep getting message"This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.

    Contact App Store support. There's a link on the right hand side of the App Store Window. They're the only ones who can sort out account issues.

  • This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled. what i can do for that ?

    This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled i have never use any other id so i am confused.... what i can do for that ? any idea...

    Please test after each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes. Keep in mind that no one here represents Apple or can help with customer-service issues.
    Step 1
    A purchased app can only be updated by signing in to the App Store with the same Apple ID that was originally used to buy it. There's no way around that limitation, which also applies to free apps. If you can't sign in with the buyer's ID, delete the app and reinstall it. You'll have to pay for it again, if applicable.
    Step 2
    If you get the alert when trying to update a bundled iLife app, select the Purchases page in the App Store and locate the app in your purchase history. If there's a button marked ACCEPT on the right, click it.
    If you have a used Mac, the bundled apps were linked to the original owner's Apple ID and can't be transferred to you. Reportedly, customer service has issued redemption codes to some second owners who asked, but it's not guaranteed.
    Step 3
    If you're trying to update iLife or iWork apps that were installed from a purchased DVD, or if you have a refurbished Mac bought directly from Apple, contact App Store customer service for a redemption code. You may be asked for the part number of the DVD.
    Step 4
    From the App Store menu bar, select
              Store ▹ View My Account
    Enter your Apple ID password at the prompt. At the lower right corner of the window that opens, click the Reset button. Close the window.
    Step 5
    According to a report, the error can result from changing the language setting of your Apple ID account. I can't confirm.

  • Certain Windows updates will not download on any PC on our network

    Hi,
    We've had a problem that seemed to develop a couple of months ago in that certain Windows updates will not download to any PC on our network, most notably IE11 and .NET 3.5.1 updates. Most others will download and install with no problem at all.
    I have tried running the Windows Update Fixit, I have tried deleting the /Windows/SoftwareDistribution folder, I have tried the System Update Readiness Tool, I have added the various Windows Update server URLs to our firewall whitelist, I have
    tried a clean boot, but to no avail. Downloading and installing the affected KB patches manually works fine though.
    When I connect any of our PCs directly to an external router the updates download and install fine. It's only when connected to our network (which comprises a Peplink WAN load balancer, Cyberoam CR25iNG security device, Windows 2003 domain controller
    & Arista 10Gig switch) that the problem exists.
    Most updates download successfully but others only get to a certain percentage downloaded, most commonly 45%, although I'm not sure if that's a meaningful figure.
    For example, the most recent batch of updates all download and install fine except for KB2982378, KB2894844, KB2972211 & KB2973112. Is there something those updates have in common that something on our network could be blocking?
    I'm really unsure where to try looking next, so if anyone has any suggestions they would be very welcome please.
    Thanks,
    Matt

    Hi  Matt,
    When you connect  to an external router directly, does your network location change to private or still domain network?
    I suspect this is related to some firewall setting, even related to your network security device.
    Please check or upload the WindowsUpdate.log ( %windir%\Windowsupdate.log), we can find some information about downloading phase.
    Alex Zhao
    TechNet Community Support

  • Windows update does not work after using System recovery disk

    I have a Toshiba Satellite c655 with WIndows 7 64 bit Home premium. The hard drive died on it, so I purchased a new hard drive and purchased the appropriate Recovery media from Toshiba. I followed the directions and installed the 3 disks on to the new hard drive. But Windows update does not work I get the following error: Windows update can not currently check for updates, because the service is not running. You may need to restart your PC    No matter what I try, I can not get it to work. And it will not let me install Windows Defender either. Any ideas or help would be appreciated. Thank you in advance for your time on this matter.
    Solved!
    Go to Solution.

    I get errors saying A problem is preventing the troubleshooter from starting.
    That makes two similarities to the following thread. Both Windows Update and Troubleshooters fail to work correctly.
       Trouble with reinstall of Win7 64 on a L505-ES5018
    The fix was to install a new hard disk driver.
       Intel Rapid Storage Technology
    -Jerry

  • HT201210 My download for iOS 7 was interrupted, it has downloaded but not installed. it goes through routine Terms & Agreements and everything, but when i try to update it tries to verify the update then says that the update is not available.

    I dont understand, when i try to update it will go through routine apple stuff, then it it will say " Software Update Unavailable (under) Software Update is not available at this time. Try again later." The thing is that i was downloading it and my wi-fi had restarted for some unknown reason and it downloaded onto my phone but not installed. and at the moment it is really bothering me because I have waited a long time for iOS 7 and I am not being allowed to update my phone to it and i just wanted to know how to fix it. Thank you.

    I imagine a ton of people are attempting to download it right now. Simple patience, maybe keep trying, and if possible, try a little later. Think of it as all those people lining up at Apple Stores + about a million more.

  • Problem updating to iphoto 9.6 after upgrading to Yoesmite  I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

    problem updating to iphoto 9.6 after upgrading to Yoesmite  I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

    "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." ?
    This error message will appear erraneously, if you skipped the update to Mavericks and iPhoto 9.5.1 and went straight from an earlier MacOS X version to Yosemite, without first updating to iPhoto 9.5.1 and associating iPhoto to your AppleID.
    Try first to buy iPhoto with your AppleID instead of updating. Delete iPhoto from Applications, but don't empty the Trash, then go to the main page of the App Store and search for iPhoto. If you are lucky, it will show as free and you can buy it directly.
    If iPhoto  is not showing as free, there is no help but contacting the App Store Support: Ask for a redemption code. You will need to provide a prove of purchase for your mac with iPhoto preinstalled.
    http://www.apple.com/support/mac/app-store/contact/

Maybe you are looking for

  • Horizontal jumpy lines after update to 10.3.9

    Hi. I've found similar posts to this but not exactly what I'm experiencing. I recently updated my 10.3 os x. I'm not even sure which one I had; got the mac about a year and a half ago and hadn't updated. I did about 3 updates, one after another and e

  • Using an animated gif/other to display series of images within another image?

    I design custom baseball cards for a hobby, and am wondering if I can use an animated GIF inset within a large photo to display a rotation of images. It is easiest if you look at the "card"/image . . . within the circle, where there is a picture of R

  • I keep getting the Error "Adobe Muse has encountered an error and will now exit..."

    I keep getting the Error "Adobe Muse has encountered an error and will now exit. Please report the last few actions you took leading up to this error to the Adobe Muse CC team. UIDs With Multiple Owners: ImageFrame owned by PagePageItem and BaseLink"

  • Html to TIff Generation

    Hi, I have to read data from the Html page and convert to Tiff in multiple pages . I came to know it can be possible through JAI . So, can any one help me out by providing some sample code or Examples . Thanks, Jaish

  • Question about stacked sequence structure

    Hi, I made a numeric control outside a stacked sequence structure, and connect the control both to frame 1 and frame 2. In frame 2 there is a while loop structure. And now I start the labview program with the control A. Then, after frame 1 finished,