Windows Update KB3023607 Wireless Problems
Since the release of the microsoft update 3023607 our clients cannot connect to our wireless. I did some research and see this update is affecting cisco VPN, but I cannot find any information about wireless connectivity.
Our environment consists of alcatel hardware running WPA2 Enterpise Authentication through Raduis TLS. Has anyone else had any problems since the updates?
We can easily hide this update and then it solves the problem but it seems microsoft is not pulling this update and doing that for thousands of clients really is not feesable.
We're seeing the same issues with wireless on Windows 8.1 clients. Cisco Wireless controllers, WPA2-Enterprise, AES, PEAP, EAP-MSCHAP v2, Radius. When KB3023607
was released, we had to rollback the update on Windows 8.1 workstations to get users working on wireless and AnyConnect. They fixed the issues with AnyConnect with the March 10, 2015 updates but the wireless issue still persists and now I don't see KB3023607
installed on my workstation to remove so I'm still trying to figure out which update is breaking it now. The workstation reports "A fatal alert was received from the remote endpoint. The TLS protocol defined fatal alert code is 42."
42 is a bad cert error but our clients are set to ignore certificates. Any help on this would be GREATLY appreciated.
Similar Messages
-
'Laserjet 1022n Windows Update' causing printing problems: print jobs don't stop printing
Hello,
a few days ago, I installed the Laserjet 1022n Windows Update on my Windows 7 64 bits and since then, I can't print a page normally: the page doesn't stop printing. I am using a network port with TCP/IP.
I made several trials to solve this problem:
- uninstall the printer driver and installing it again (I tried the last version on the HP site and an older one that worked perfectly before)
- update the firmware of the printer to the last version on the HP site.
When I pause the printer and start the print job, you see it arriving in the list. Resuming the printer, the print starts on the printer but you see that the job stays in the list, flashing again and again. The printer keeps printing the same page.
I don't know what I can do to solve this problem. There is no mean of uninstalling the HP Laserjet 1022n software update because it doesn't appear in the list of installed programs (well on the list of the done updates by the way op windows updates).
I have the same problem printing on the same printer from another Windows 7 PC (with the same windows update done)
But I have no problem printing with my laptop on another network printers.
Is there someone having the same problem and how to solve it ?
Thanks for answering
This question was solved.
View Solution.I found the solution on this site : http://www.tomshardware.co.uk/forum/59912-29-1022n-printer-stop-printing
You just have to uncheck the chekbox "Enable two-way communication" on the "Ports" tab of the printer properties and it works normally again !!!! -
After downloading the latest Windows updates I found that I could not play videos on YouTube or at other sites. Switching to other browsers I found I could play those same videos now without any problem. So I did a System Restore to determine if the Windows updates had affected video play using Firefox. The restore point was set to the day before the Windows download occurred. After System Restore was completed I could now play videos using the Firefox browser.
To make sure that the Windows update was the problem, I again downloaded the newest Windows Updates and once again could not play videos on any site using Firefox. System restore was used to again reset my computer to the day before and once again the videos would ow play in the Firefox browser.Actually your reply took me in another direction and I found this on the Adobe site:
The RealPlayer extension for Firefox, Downloading & Recording, has compatibility issues with Flash Player 11.3. If RealPlayer is installed Flash Player content does not appear. YouTube provides an error message when you try to watch a video.
As a workaround, do the following:
Start RealPlayer.
Click the RealPlayer icon in the upper-left corner and select Preferences.
Select Download & Recording in the left menu and deselect Enable Web Download & Recording for These Installed Browsers option.
Click OK and restart Mozilla Firefox.
Once I followed this I could now again play videos in Firefox. -
Thankpad -window update problem
I tried to install Win7x64 professional (technet version) to Thinkpad.After executing Thinkpad power managment or Thankpad system update software.
The error message:"Window update cannot currenly check for update, because the services is not running. You may need to restart your computer" received when pressed win 7 software updated.
If the above thankpad programs were not installed , the window update would be fine.
I tried the following action to solve it,but fault was insisted.
Type: cmd
Right click on cmd in start menu and select 'Run as Administrator'
Type: net stop wuauserv
Hit Enter
Type: ren c:\windows\SoftwareDistribution softwaredistribution.old
Hit Enter
Type: net start wuauserv
Hit Enter
Type: exit
Hit Enter
and sfc /scannow
Error message:
2014-05-08 09:28:06, Info CSI 00000009 [SR] Verifying 100 (0x0000000000000064) components
2014-05-08 09:28:06, Info CSI 0000000a [SR] Beginning Verify and Repair transaction
2014-05-08 09:28:10, Info CSI 0000000c [SR] Verify complete
2014-05-08 09:28:10, Info CSI 0000000d [SR] Verifying 100 (0x0000000000000064) components
2014-05-08 09:28:10, Info CSI 0000000e [SR] Beginning Verify and Repair transaction
2014-05-08 09:28:13, Info CSI 00000010 [SR] Verify complete
2014-05-08 09:28:13, Info CSI 00000011 [SR] Verifying 100 (0x0000000000000064) components
2014-05-08 09:28:13, Info CSI 00000012 [SR] Beginning Verify and Repair transactionHi,
How about your problem now? Is Windows update works fine?
Please check Windows update service status in Services firstly.
According to your description, it seems Lenovo software update assistance tool problem. It may has its own service in Windows Services. Please check it.
If Windows update also encounter problem, please use Windows update troubleshooter to fix this problem for test.
Control Panel\All Control Panel Items\Troubleshooting\All Categories\Windows update
If problem persists, please feel free let us know.
Roger Lu
TechNet Community Support -
Crystal report not showing correctly in firefox after windows update
From the past six months, crystal reports has been displayed without the print toolbar and the formatting is completely lost in firefox. Previously we found that when we uninstall the windows updates KB2836942, KB2836943, KB2836946, KB2836947, the problem is resolved. But with more and more windows updates that are automatically updated on the servers, it is getting practically impossible to track which windows update creates the problem. There is absolutely no issue in Chrome, IE and Opera; it is only with firefox that this problem occurs; so we feel it is more of a firefox issue than a windows update problem. It is not just in one machine, but we found the same issue at all our customer's servers (more than 10). The servers are a mix of windows 2008, windows 2012 with iis 7. We also observed the same problem on windows 7 machines. We have been recommending firefox as the best browser for our software to all our customers, and with this problem cropping up, we are badly handicapped. Kindly let us know how to sort this issue. We have provided the link below for your perusal. When you open it in chrome it works fine, but on firefox it does not display correctly:
http://54.209.141.3/Reports/Report.aspx?reportname=RptProductWiseSalesDetails.rpt¶mlist=@FromDat,01/01/2011;@ToDat,01/26/2014;@BranchSlno,1;@FranchiseSlno,1;@FirstCol,B;@DateType,B;@SaleChannel,A;@ProductTypeSlno,0;@ProductSlno,6;@ColorSlno,0;@FinancierSlno,0;@ChannelTypeSlno,0;@ChannelSlno,0;@SalesPersonSlno,0;@SaleStatus,L;@BillingType,A;@LoginUser,admin;@LoginBranch,Keerthi%20Triumph%20Bangalore;@Franchise,Triumph;@AddCustomerDetail,0;@SaleCodeSuffix,&loadfromsql=0Those four updates all relate to the .Net framework, and involve how an ASP.Net application recognizes different browsers.
* http://support.microsoft.com/kb/2836942
* http://support.microsoft.com/kb/2836943
* http://support.microsoft.com/kb/2836946
* http://support.microsoft.com/kb/2836947
Each contains this Note:
<blockquote>There is a configuration switch to be used to revert back to the old behavior: <br>
<pre><appSettings>
<add key="aspnet:UseLegacyBrowserCaps" value="true" />
</appSettings></pre>
</blockquote>
I think the downside of turning off the changes is that IE 11 will not be well supported.
That's all I know so far... -
Windows Update no longer works after using Lenovo Enhanced Recovery
Using the system recovery backup disk I created when I first got my T500, I performed a recovery to a new larger HD that I'm upgrading to.
All went well, windows booted up and I got the "Starting Windows for the first time" message and then I went through the setup wizard... Did everything like I did when first got the T500. Windows 7 activation was successful
Now here's the rub, I tried to use Windows Update retrieve all of the updates released since April when my laptop was built. Windows Update flat out refuses to work. I keep getting a pop-up box saying "windows Update cannot currently check for updates, because the service is not running. You may need to start your computer".
I checked the Windows Update service, it's running. I've gone into the windows folder and deleted the software distribution folder as instructed by Microsoft support. They wanted me to also download and install a "CheckSUR" tool from their support website, but the install falls with a a pop-up from Windows Update Standalone Installer with an error: 0xc8000247.
Now this is all on the new HD, when I swap the older on back in there is no problem getting the updates.
I'm stuck, has anyone encountered this type of thing with Windows Update?I executed the "fixit" in both modes at http://support.microsoft.com/kb/971058
Windows update still refuses to work. All pertinent services are running.
Since this is an attempt at installing a larger hd, I swapped back to the original drive and verified that windows update has no problems when running on the original HD.
I've now started again from scratch.
I put the new larger HD in a SATA/USB HD docking station that I just bought. I formatted the new HD clean, then instead of using the factory recovery disks like I did before, I used Acronis True Image, which I downloaded from the Western Digital support webpage, to clone the original HD over to the new one.
I powered off the laptop, pulled the original HD out and put the new HD in , unplugged the now empty SATA/USB HD docking station, booted up, windows starts and comes up with all looking fine, except... again, windows update still refuses to work.
I went back to the Microsoft website above, ran the fixit action in aggressive mode, and windows updates still gets the same result... When I open windows update in control panel, Windows Update is in red. When I check for updates, I get the pop-up saying "Windows Update cannot currently check for updates, because the service is not running. You may need to restart your computer".
A check of services shows that Windows Update, Cryptographic Service and Background Intelligent Transfer Service are all started.
This is really frustrating... this should be a simple HD upgrade. It appears that with whatever means that is used to copy or place an image of the original HD on the new HD, Windows 7 is not going to let me use update on the new drive. -
Windows Update Error 0x80070057
When installing Windows 7 SP 1 I get this error. When not using the Windows Update service, so manually downloading the SP and running it, the setup completes, reboots automaticually, typical "Configuring Windows Updates" screen, reboots again, "Configuring
stage 2" , suddenly the message changes to "Error configuring updates" and reverts to original state. Same story when using the windows updates service.
So far I have tried :
- System Update Readiness Tool
- Rename SoftwareDistribution folder
- Sysprep /oobe /generalize
- Update KB972036 is not installed
- Reset windows updates http://support.microsoft.com/kb/971058/en-us
- Windows Update Troubleshooter
- Installed SP1 in Windows safe mode
- There are no references to 0x80070057 present in HKLM\Software\Policies\Microsoft\Windows\WindowsUpdate
- http://www.tweaking.com/content/page/windows_repair_all_in_one.html
I was convinced the problem was the SID as the PC's were cloned using images. But sysprep with the /generalize switch resets the SID, so appearently this was not the cause of the problem.
I do realize a format or a reset to factory with the manufacturer CD would fix this but we like to avoid this as we'll need to do all the PCs in our network.
Any suggestions on how to proceed would be very much appreciated.
Thanks in advance!Hi,
According to the CBS.log:
2014-09-17 11:47:49, Info CBS SPI: SPReview.exe started
2014-09-17 11:47:49, Error CBS SPI: (SPIRegQueryDWORDValue:400)Failed to open the registry root: n/a, key: SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\ServicePack\SPReview.
er=0x2
2014-09-17 11:47:49, Info CBS SPI: SQM is not opted in
2014-09-17 11:47:49, Error CBS SPI: (SPIRegQueryDWORDValue:413)Failed to query registry value: UploadDisableFlag er=0x2
2014-09-17 11:47:49, Info CBS SPI: Determining Version and Wave Values in SpInstall: Package_for_KB976932~31bf3856ad364e35~x86~~6.1.1.17514
2014-09-17 11:47:49, Info CBS SPI: Build number 6.1.1.17514
Generally speaking, these two error message means Windows update encoutner permission problem. Would you please share the setupapi.dev.log of C:\Windows\Inf?
In addition, another thread had similar problem with yours, you can take it as reference:
http://social.technet.microsoft.com/Forums/windows/en-US/da88d15d-6655-47c8-813f-687d61fa4de2/windows-7-servicepack1-installation-problem-sp-installation-failed-hr-0x800f0826?forum=w7itproinstall
Another KB might be helpful:
http://support.microsoft.com/kb/2575082
Roger Lu
TechNet Community Support -
Windows Update 956391 causes texture anomalies upon U3D creation
This message is to make others aware of a texture problem that occurs when U3D files are created in the toolkit (and subsequently imported into Acrobat 3D) due to an automatic update of Windows Active X Renderer(956391).
I am working on a project that involves the batch conversion of OBJ files (with texture) to U3D files using the Adobe 3D Toolkit. We then use the U3D's to make distributeable PDF files. After a typical automatic Windows Update, the U3D files showed texture anomalies when imported to the Acrobat 3D. Uninstalling the Windows update solved the problem (and upon contacting Microsoft - they agreed with the uninstall). Note that this is only upon creation of the U3D files (PDFS) and is reflected in the quality of the final PDF.
Hope this might help others out there!Great post. Thanks, Angelia
-
Should I accept all windows updates?
This is unclear to me. It seems some people have said to not do this since some windows updates can cause problems. I have been having a problem with teh computer not recognizing a monitor (that I have used for years as a 2nd monitor but suddenly quit seeing). It's not clear if a windows or nvidia update caused this. So do I accept important windows updates or not?
MichaelI always explicitly pick what I want applied from Windows Update. I refuse to use any drivers from Windows Update.
-
I recently upgraded to Windows 10. I have the HP Officejet 4635 e installed. I keep getting the following error message when running Windows Update: There were problems installing some updates, but we'll try again later. If you keep seeing this and want to search the web or contact support for information, this may help: • HP - Enterprise WSD Multi-Function Printer, Other hardware - Null Fax - HP Officejet 4630 series - Error 0x80070490 Any ideas on how to fix it?
Hi,
How about your problem now? Could you access to the system? If OK, you can try to uninstall the latest update or create a new user account for test to fix this problem.
If still not, to restore system to previous edition, you need to make a system reinstall.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
After performing the OS X 10.10.2 update, OpenGL applications, for example Starry Night Pro fail to run, there are numerous windows update/refresh problems (incomplete refresh, remnants of window/frame borders), and some applications, for example Google Chrome are unusable, as cursor motion in the application window causes the display to flash horizontal bars in the window.
I've tried a variety of things, including downloading the most current release of Xcode, turning on/off transparency in Accessibility, graphics switching, and a few other things, but the problem persists.
The App Store display behaves similarly. I am running a MacBook Pro.
This is the output from EtreCheck:
Problem description:
Screen/windows corruption
EtreCheck version: 2.1.8 (121)
Report generated March 11, 2015 at 10:26:15 PM CDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2012) (Technical Specifications)
MacBook Pro - model: MacBookPro9,1
1 2.6 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 36
Video Information: ℹ️
Intel HD Graphics 4000
NVIDIA GeForce GT 650M - VRAM: 1024 MB
System Software: ℹ️
OS X 10.10.2 (14C1510) - Time since boot: 23:26:45
Disk Information: ℹ️
APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 748.96 GB (146.71 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 749.30 GB Online
HL-DT-ST DVDRW GS31N
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple iPod
Western Digital My Book 1 TB
EFI (disk3s1) <not mounted> : 210 MB
WDP1 (disk3s2) /Volumes/WDP1 : 333.40 GB (9.12 GB free)
WDP2 (disk3s3) /Volumes/WDP2 : 333.40 GB (2.55 GB free)
WDP3 (disk3s4) /Volumes/WDP3 : 332.79 GB (94.00 GB free)
Western Digital My Book 1140 2 TB
EFI (disk4s1) <not mounted> : 210 MB
2TB_1 (disk4s2) /Volumes/2TB_1 : 666.79 GB (31.36 GB free)
2TB_2 (disk4s3) /Volumes/2TB_2 : 666.79 GB (58.76 GB free)
2TB_3 (disk4s4) /Volumes/2TB_3 : 666.18 GB (70.41 GB free)
Logitech USB Receiver
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Logitech USB Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Applications/Parallels Access.app
[loaded] com.parallels.virtualsound (1.0.36 36 - SDK 10.6) [Click for support]
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hypervisor (10.1.1 28614 - SDK 10.7) [Click for support]
[not loaded] com.parallels.kext.netbridge (10.1.1 28614 - SDK 10.7) [Click for support]
[not loaded] com.parallels.kext.usbconnect (10.1.1 28614 - SDK 10.7) [Click for support]
[not loaded] com.parallels.kext.vnic (10.1.1 28614 - SDK 10.7) [Click for support]
/Applications/Utilities/DiskWarrior.app
[not loaded] com.alsoft.Preview (4.1) [Click for support]
/Library/Extensions
[loaded] com.epson.driver.EPSONProjectorUDAudio (1.40 - SDK 10.6) [Click for support]
/System/Library/Extensions
[not loaded] com.FTDI.driver.FTDIUSBSerialDriver (2.2.18 - SDK 10.6) [Click for support]
[loaded] com.Logitech.Control Center.HID Driver (3.6.0 - SDK 10.6) [Click for support]
[loaded] com.Logitech.Unifying.HID Driver (1.2.0 - SDK 10.6) [Click for support]
[not loaded] com.Ralink.driver.RT73 (1.1.6) [Click for support]
[not loaded] com.beceem.BeceemAppleWiMAXAdapter (5.2.56d16) [Click for support]
[not loaded] com.cisco.nke.ipsec (2.0.1) [Click for support]
[not loaded] com.devguru.driver.DIFMCDFree (1.1.0) [Click for support]
[not loaded] com.devguru.driver.DIFMSerial (1.1.0) [Click for support]
[not loaded] com.fklt.driver (1.8.0) [Click for support]
[not loaded] com.novatelwireless.driver.3G (2.2.8) [Click for support]
[not loaded] com.novatelwireless.driver.DisableAutoInstall (1.2) [Click for support]
[not loaded] com.prolific.driver.PL2303 (2.0.0) [Click for support]
[not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.39) [Click for support]
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.39) [Click for support]
[not loaded] com.sbig.driver.SBIGUSBEDriver (4.70) [Click for support]
[not loaded] com.sbig.driver.SBIGUSBLoader (4.70.2) [Click for support]
[not loaded] com.sierrawireless.driver.SierraDevSupport (2.0.6) [Click for support]
[not loaded] com.sierrawireless.driver.SierraFSCSupport (2.0.6) [Click for support]
[not loaded] com.tomtom.driver.UsbEthernetGadget (1.0.0d1) [Click for support]
[not loaded] com.wacom.kext.wacomtablet (6.3.7 - SDK 10.8) [Click for support]
[not loaded] org.emul.driver.EarthMate (1.0.0d1) [Click for support]
/System/Library/Extensions/NovatelWireless3G.kext/Contents/Plugins
[not loaded] com.novatelwireless.driver.3GData (2.2.8) [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[running] com.adobe.AdobeCreativeCloud.plist [Click for support]
[not loaded] com.canon.MFManager.plist [Click for support]
[loaded] com.divx.dms.agent.plist [Click for support]
[loaded] com.divx.update.agent.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[running] com.kodak.BonjourAgent.plist [Click for support]
[running] com.Logitech.Control Center.Daemon.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.parallels.mobile.prl_deskctl_agent.launchagent.plist [Click for support]
[running] com.wacom.wacomtablet.plist [Click for support]
[loaded] org.macosforge.xquartz.startx.plist [Click for support]
Launch Daemons: ℹ️
[running] com.adobe.adobeupdatedaemon.plist [Click for support]
[loaded] com.adobe.fpsaud.plist [Click for support]
[running] com.autodesk.backburner_manager.plist [Click for support]
[running] com.autodesk.backburner_server.plist [Click for support]
[loaded] com.autodesk.backburner_start.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[running] com.makerbot.conveyor.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[running] com.parallels.mobile.dispatcher.launchdaemon.plist [Click for support]
[loaded] com.parallels.mobile.kextloader.launchdaemon.plist [Click for support]
[loaded] org.macosforge.xquartz.privileged_startx.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support]
[loaded] com.kodak.KODAK AiO Firmware Updater.plist [Click for support]
[loaded] com.kodak.KODAK AiO Software Updater.plist [Click for support]
[running] com.parallels.mobile.startgui.launchagent.plist [Click for support]
[loaded] com.valvesoftware.steamclean.plist [Click for support]
User Login Items: ℹ️
Google Drive Application (/Applications/Google Drive.app)
USB Display Agent Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
USB Display Agent Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
Internet Plug-ins: ℹ️
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 [Click for support]
OVSHelper: Version: 1.1 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Google Earth Web Plug-in: Version: 6.0 [Click for support]
SlingPlayer: Version: Unknown [Click for support]
RealPlayer Plugin: Version: Unknown [Click for support]
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
DivX Web Player: Version: 3.2.4.1250 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 6.0
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 [Click for support]
AdobePDFViewer: Version: 9.5.5 [Click for support]
JavaAppletPlugin: Version: Java 8 Update 40 Check version
User internet Plug-ins: ℹ️
fbplugin_1_0_3: Version: Unknown [Click for support]
BrowserPlus_2.6.0: Version: 2.6.0 [Click for support]
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
fbplugin_1_0_1: Version: Unknown [Click for support]
Picasa: Version: 1.0 [Click for support]
Safari Extensions: ℹ️
Open in Internet Explorer
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
GoPro [Click for support]
Growl [Click for support]
Java [Click for support]
Logitech Control Center [Click for support]
MacFUSE [Click for support]
Perian [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 748.96 GB Disk used: 602.25 GB
Destinations:
WDP3 [Local]
Total size: 332.79 GB
Total number of backups: 2
Oldest backup: 2013-04-03 12:26:32 +0000
Last backup: 2013-04-03 12:26:32 +0000
Size of backup disk: Too small
Backup size 332.79 GB < (Disk used 602.25 GB X 3)
STAR_TECH_EXT [Local]
Total size: 499.76 GB
Total number of backups: 2
Oldest backup: 2013-04-03 14:26:44 +0000
Last backup: 2013-04-03 14:26:44 +0000
Size of backup disk: Too small
Backup size 499.76 GB < (Disk used 602.25 GB X 3)
Top Processes by CPU: ℹ️
3% WindowServer
1% Creative Cloud
0% firefox
0% fontd
0% AdobeUpdateDaemon
Top Processes by Memory: ℹ️
670 MB Safari
567 MB firefox
464 MB softwareupdated
395 MB mds_stores
309 MB WindowServer
Virtual Memory Information: ℹ️
1.43 GB Free RAM
7.87 GB Active RAM
6.40 GB Inactive RAM
1.47 GB Wired RAM
7.30 GB Page-ins
205 KB Page-outs
Diagnostics Information: ℹ️
Mar 11, 2015, 04:04:23 PM /Library/Logs/DiagnosticReports/ScreenSaverEngine_2015-03-11-160423_[redacted]. cpu_resource.diag [Click for details]
Mar 11, 2015, 02:54:29 PM /Library/Logs/DiagnosticReports/ScreenSaverEngine_2015-03-11-145429_[redacted]. cpu_resource.diag [Click for details]
Mar 11, 2015, 10:18:18 AM /Library/Logs/DiagnosticReports/ScreenSaverEngine_2015-03-11-101818_[redacted]. cpu_resource.diag [Click for details]
Mar 10, 2015, 10:55:10 PM Self test - passed
Mar 9, 2015, 03:21:58 AM /Library/Logs/DiagnosticReports/SubmitDiagInfo_2015-03-09-032158_[redacted].cpu _resource.diag [Click for details]Here is the diagnostic script output:
Start time: 12:06:12 03/14/15
Revision: 1290
Model Identifier: MacBookPro9,1
System Version: OS X 10.10.2 (14C1510)
Kernel Version: Darwin 14.1.0
Time since boot: 3 days 13:11
UID: 502
Memory
BANK 0/DIMM0
Size: 8 GB
Speed: 1600 MHz
Status: OK
Manufacturer: 0x859B
BANK 1/DIMM0
Size: 8 GB
Speed: 1600 MHz
Status: OK
Manufacturer: 0x859B
USB
Hub (Belkin Corporation)
My Book 1140 (Western Digital Technologies, Inc.)
My Book (Western Digital Technologies, Inc.)
USB Receiver (Logitech Inc.)
USB Receiver (Logitech Inc.)
FileVault 2: On
Activity
CPU: user 13%, system 7%
CPU usage (%)
plugin-container (UID 502): 100.0
com.apple.WebKit (UID 502): 26.2
File opens (per sec)
AdobeUpdateDaem (UID 0) => /tmp/UUID_OUT (status 60): 6
Energy (lifetime)
WindowServer (UID 88): 7.44
com.apple.WebKit.WebContent (UID 502): 7.22
Energy (sampled)
plugin-container (UID 502): 99.13
com.apple.WebKit.WebContent (UID 502): 23.60
WindowServer (UID 88): 21.29
com.apple.WebKit.WebContent (UID 502): 13.16
Console (UID 502): 12.28
Memory (MB)
kernel_task (UID 0): 1327
Font issues: 1
Listeners
launchd: ftp
System caches/logs
3.6 GiB: /System/Library/Caches/com.apple.coresymbolicationd/data
Diagnostic reports
2015-02-19 com.apple.WebKit.WebContent crash
2015-02-20 Topaz Adjust 5 crash
2015-02-20 Topaz ReStyle crash
2015-02-20 com.apple.WebKit.WebContent crash x2
2015-02-21 com.apple.WebKit.WebContent crash x2
2015-02-25 com.apple.WebKit.WebContent crash
2015-03-04 system_profiler crash
2015-03-07 com.apple.WebKit.WebContent crash
2015-03-08 MPEG Streamclip hang x2
2015-03-08 com.apple.WebKit.WebContent crash
I/O errors
disk2s2: close: journal 0xffffff8049bb9c20, is invalid. aborting outstanding transactions 1
disk2s2: do_jnl_io: strategy err 0x6 1
disk2s3: close: journal 0xffffff8049bb9740, is invalid. aborting outstanding transactions 1
disk2s3: do_jnl_io: strategy err 0x6 1
disk2s4: close: journal 0xffffff8049bb9260, is invalid. aborting outstanding transactions 1
disk2s4: do_jnl_io: strategy err 0x6 1
disk3s2: do_jnl_io: strategy err 0x6 1
disk3s3: close: journal 0xffffff8049bb95a0, is invalid. aborting outstanding transactions 1
disk3s3: do_jnl_io: strategy err 0x6 1
disk3s4: close: journal 0xffffff8049bb9400, is invalid. aborting outstanding transactions 1
disk3s4: do_jnl_io: strategy err 0x6 1
disk4s3: close: journal 0xffffff8023522c20, is invalid. aborting outstanding transactions 1
disk4s3: do_jnl_io: strategy err 0x6 1
Volumes
disk1: /
disk5s3: /Volumes/WDP2
disk5s2: /Volumes/WDP1
disk5s4: /Volumes/WDP3
disk6s2: /Volumes/2TB_1
disk6s4: /Volumes/2TB_3
disk6s3: /Volumes/2TB_2
disk7s2: /Volumes/Starry Night Pro 7
HID errors: 3
Kernel log
Mar 8 17:08:19 firefox (map: 0xffffff80501790f0) triggered DYLD shared region unnest for map: 0xffffff80501790f0, region 0x7fff8a200000->0x7fff8a400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Mar 8 17:08:59 firefox (map: 0xffffff8051e54870) triggered DYLD shared region unnest for map: 0xffffff8051e54870, region 0x7fff8a200000->0x7fff8a400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Mar 9 08:11:09 jnl: disk2s4: close: journal 0xffffff8049bb9260, is invalid. aborting outstanding transactions
Mar 9 08:11:09 jnl: disk3s4: close: journal 0xffffff8049bb9400, is invalid. aborting outstanding transactions
Mar 9 08:11:09 jnl: disk2s3: close: journal 0xffffff8049bb9740, is invalid. aborting outstanding transactions
Mar 9 08:11:09 jnl: disk3s3: close: journal 0xffffff8049bb95a0, is invalid. aborting outstanding transactions
Mar 9 08:11:09 jnl: disk3s2: write_journal_header: error writing the journal header!
Mar 9 08:11:09 jnl: disk2s2: close: journal 0xffffff8049bb9c20, is invalid. aborting outstanding transactions
Mar 9 11:42:59 firefox (map: 0xffffff8031b5e780) triggered DYLD shared region unnest for map: 0xffffff8031b5e780, region 0x7fff89e00000->0x7fff8a000000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Mar 10 13:44:08 Limiting closed port RST response from 310 to 250 packets per second
Mar 10 23:03:12 firefox (map: 0xffffff802a954780) triggered DYLD shared region unnest for map: 0xffffff802a954780, region 0x7fff90000000->0x7fff90200000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Mar 10 23:20:37 Limiting icmp unreach response from 302 to 250 packets per second
Mar 11 08:39:04 jnl: disk4s3: write_journal_header: error writing the journal header!
Mar 11 08:39:04 jnl: disk4s3: close: journal 0xffffff8023522c20, is invalid. aborting outstanding transactions
Mar 13 17:42:33 Limiting icmp unreach response from 428 to 250 packets per second
Mar 13 17:42:34 Limiting icmp unreach response from 433 to 250 packets per second
System log
Mar 14 09:09:18 VTDecoderXPCService: GVA warning: failed to get a service for display id: 4128828
Mar 14 09:09:18 VTDecoderXPCService: GVA warning: failed to get a service for display id: 4128829
Mar 14 09:09:18 VTDecoderXPCService: GVA warning: failed to get a service for display id: 4128830
Mar 14 09:09:18 VTDecoderXPCService: GVA warning: failed to get a service for display id: 4128831
Mar 14 09:14:35 Adobe Photoshop Elements Editor: Error loading /Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library: dlopen(/Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library, 262): no suitable image found. Did find:
/Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library: mach-o, but wrong architecture
Mar 14 09:14:35 Adobe Photoshop Elements Editor: Error loading /Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library: dlopen(/Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library, 262): no suitable image found. Did find:
/Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library: mach-o, but wrong architecture
Mar 14 09:14:35 Adobe Photoshop Elements Editor: Error loading /Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library: dlopen(/Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library, 262): no suitable image found. Did find:
/Applications/Adobe Photoshop Elements 10/Support Files/Plug-Ins/onOne Library.8li/Contents/MacOS/onOne Library: mach-o, but wrong architecture
Mar 14 09:32:27 com.apple.sbd: SOSCCThisDeviceIsInCircle SOSCCThisDeviceIsInCircle!! 7
Mar 14 09:35:28 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
Mar 14 09:47:41 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "Installer" for over 1.00 seconds. Server has re-enabled them.
Mar 14 09:50:38 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
Mar 14 09:52:55 WindowServer: WSGetSurfaceInWindow : Invalid surface 583724228 for window 1898
Mar 14 10:09:38 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.appkit.xpc.openAndSav" for over 1.00 seconds. Server has re-enabled them.
Mar 14 10:09:38 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.WebKit.Plugin.64" for over 1.00 seconds. Server has re-enabled them.
Mar 14 10:09:48 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.appkit.xpc.openAndSav" for over 1.00 seconds. Server has re-enabled them.
Mar 14 10:09:49 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.WebKit.Plugin.64" for over 1.00 seconds. Server has re-enabled them.
Mar 14 10:09:55 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.appkit.xpc.openAndSav" for over 1.00 seconds. Server has re-enabled them.
Mar 14 10:10:08 WindowServer: disable_update_timeout: UI updates were forcibly disabled by application "com.apple.appkit.xpc.openAndSav" for over 1.00 seconds. Server has re-enabled them.
Mar 14 10:39:34 launchservicesd: Application App:"loginwindow" asn:0x0-1001 pid:69 refs=7 @ 0x7fd821519070 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x29a29a pid=25591 "ScreenSaverEngine"")), so denying. : LASSession.cp #1521 SetFrontApplication() q=LSSession 100005/0x186a5 queue
Mar 14 10:39:34 launchservicesd: Application App:"loginwindow" asn:0x0-1001 pid:69 refs=8 @ 0x7fd821519070 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x29a29a pid=25591 "ScreenSaverEngine"")), so denying. : LASSession.cp #1521 SetFrontApplication() q=LSSession 100005/0x186a5 queue
Mar 14 11:57:26 launchservicesd: Application App:"loginwindow" asn:0x0-1001 pid:69 refs=7 @ 0x7fd821519070 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x29f29f pid=26088 "ScreenSaverEngine"")), so denying. : LASSession.cp #1521 SetFrontApplication() q=LSSession 100005/0x186a5 queue
Mar 14 11:57:26 launchservicesd: Application App:"loginwindow" asn:0x0-1001 pid:69 refs=8 @ 0x7fd821519070 tried to be brought forward, but isn't in fPermittedFrontApps ( ( "LSApplication:0x0-0x29f29f pid=26088 "ScreenSaverEngine"")), so denying. : LASSession.cp #1521 SetFrontApplication() q=LSSession 100005/0x186a5 queue
launchd log
Mar 8 17:07:46 com.apple.xpc.launchd.domain.system: Session adoption is only allowed in user domains.
Mar 8 17:08:18 com.apple.xpc.launchd.user.502.100006.Aqua: Could not import service from caller: caller = otherbsd.341, service = com.garmin.renu.service, error = 119: Service is disabled
Mar 8 17:08:18 com.apple.xpc.launchd.user.502.100006.Aqua: Could not import service from caller: caller = otherbsd.341, service = com.apple.photostream-agent, error = 119: Service is disabled
Mar 9 11:41:23 com.apple.xpc.launchd.domain.system: Session adoption is only allowed in user domains.
Mar 9 11:41:51 com.apple.xpc.launchd.user.502.100006.Aqua: Could not import service from caller: caller = otherbsd.274, service = com.garmin.renu.service, error = 119: Service is disabled
Mar 9 11:41:51 com.apple.xpc.launchd.user.502.100006.Aqua: Could not import service from caller: caller = otherbsd.274, service = com.apple.photostream-agent, error = 119: Service is disabled
Mar 10 22:48:48 com.apple.xpc.launchd.domain.user.loginwindow.14802.4294967295: Could not import service from caller: caller = imklaunchagent.14852, service = com.parallels.inputmethod.ParallelsIM.5712, error = 134: Service cannot load in requested session
Mar 10 22:48:58 com.apple.xpc.launchd.domain.user.loginwindow.14802.4294967295: Could not import service from caller: caller = WacomTabletDriv.14813, service = com.wacom.WacomTouchDriver.183780, error = 134: Service cannot load in requested session
Mar 10 22:48:59 com.apple.xpc.launchd.domain.user.loginwindow.14802.4294967295: Could not import service from caller: caller = prl_deskctl_age.14812, service = com.parallels.mobile.prl_deskctl_agent.220416.UUID, error = 134: Service cannot load in requested session
Mar 10 22:48:59 com.apple.xpc.launchd.domain.user.loginwindow.14802.4294967295: Could not import service from caller: caller = WacomTabletDriv.14813, service = com.wacom.TabletDriver.184064, error = 134: Service cannot load in requested session
Mar 10 22:56:21 com.apple.xpc.launchd.domain.system: Session adoption is only allowed in user domains.
Mar 10 22:59:02 com.apple.xpc.launchd.user.502.100005.Aqua: Could not import service from caller: caller = otherbsd.340, service = com.garmin.renu.service, error = 119: Service is disabled
Mar 10 22:59:02 com.apple.xpc.launchd.user.502.100005.Aqua: Could not import service from caller: caller = otherbsd.340, service = com.apple.photostream-agent, error = 119: Service is disabled
Loaded kernel extensions
com.Logitech.Control Center.HID Driver (3.6.0)
com.Logitech.Unifying.HID Driver (1.2.0)
com.epson.driver.EPSONProjectorUDAudio (1.40)
com.parallels.virtualsound (1.0.36 36)
System services loaded
com.adobe.adobeupdatedaemon
com.adobe.fpsaud
com.apple.watchdogd
com.autodesk.backburner_manager
com.autodesk.backburner_server
com.autodesk.backburner_start
com.google.keystone.daemon
com.makerbot.conveyor.daemon
com.oracle.java.Helper-Tool
com.oracle.java.JavaUpdateHelper
com.parallels.mobile.dispatcher.launchdaemon
com.parallels.mobile.kextloader.launchdaemon
org.macosforge.xquartz.privileged_startx
System services disabled
com.apple.security.FDERecoveryAgent
com.apple.mtmd
com.apple.mrt
com.apple.mtmfs
Login services loaded
com.GoPro.GoPro-Importer
com.Logitech.Control Center.Daemon
com.adobe.AAM.Scheduler-1.0
com.adobe.ARM.UUID
com.adobe.ARM.UUID
com.adobe.ARM.UUID
com.adobe.AdobeCreativeCloud
com.apple.Safari
- status: 78
com.apple.mrt.uiagent
com.citrixonline.GoToMeeting.G2MUpdate
com.divx.dms.agent
com.divx.update.agent
com.google.keystone.system.agent
com.kodak.BonjourAgent
com.kodak.KODAK AiO Firmware Updater
com.kodak.KODAK AiO Software Updater
com.oracle.java.Java-Updater
com.parallels.mobile.prl_deskctl_agent.launchagent
com.parallels.mobile.startgui.launchagent
com.valvesoftware.steamclean
com.wacom.wacomtablet
gldrvmond
org.macosforge.xquartz.startx
Global login items
/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app
/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app
User login items
Google Drive
- /Applications/Google Drive.app
USB Display Agent
- /Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app
USB Display Agent
- /Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app
User crontab
#SqzS VERSION = 1.0.0
#SYMANTEC SCHEDULER CRON ENTRIES. THESE ENTRIES ARE AUTOMATICALLY GENERATED
#PLEASE DO NOT EDIT.
# Enc=1 Name="Update Virus Protection" EvType1=1 EvType2=0 Sched=2
0 8 * * 5 "/Library/Application Support/Symantec/Scheduler/SymSecondaryLaunch.app/Contents/schedLauncher" 1 "/Applications/Symantec Solutions/LiveUpdate.app/Contents/MacOS/LiveUpdate" " " "oapp" "aevt" "exAG" "-update LUdf"
# Enc=1 Name="My AntiVirus Scan Task" EvType1=2 EvType2=0 Sched=2
#0 9 * * 6 "/Library/Application Support/Symantec/Scheduler/SymSecondaryLaunch.app/Contents/schedLauncher" -n 2 "/Library/Application Support/Symantec/AntiVirus/ScanNotification.app/Contents/scheduledScanner" " " "NVsi" "SCae" "path" '/' "kydo" "niCE" "long" 0
# Enc=1 Name="My Product Update Task" EvType1=1 EvType2=0 Sched=3
0 8 * * * "/Library/Application Support/Symantec/Scheduler/SymSecondaryLaunch.app/Contents/schedLauncher" 3 "/Applications/Symantec Solutions/LiveUpdate.app/Contents/MacOS/LiveUpdate" " " "oapp" "aevt" "exAG" "-update LUlu"
#SqzS END SYMANTEC CRON ENTRIES
Safari extensions
Open in Internet Explorer
- com.parallels.openinie
Widgets
TimeCalc
eCalc_Scientific
iCloud errors
bird 137
cloudd 18
storedownloadd 2
CallHistorySyncHelper 2
Continuity errors
lsuseractivityd 21
sharingd 11
Restricted files: 10847
Lockfiles: 19
High file counts
Desktop: 84
Accessibility
Keyboard Zoom: On
Scroll Zoom: On
Contents of /Library/LaunchAgents/com.canon.MFManager.plist
- mod date: May 22 05:23:32 2012
- checksum: 290641261
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.canon.MFManager</string>
<key>Program</key>
<string>/Applications/Canon Utilities/ImageBrowser EX/ExtApp/MFManager.app/Contents/MacOS/MFManager</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Canon Utilities/ImageBrowser EX/ExtApp/MFManager.app/Contents/MacOS/MFManager</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.divx.dms.agent.plist
- mod date: Nov 17 02:11:48 2014
- checksum: 637650676
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.divx.dms.agent</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/DivX/DivXMediaServer.app/Contents/MacOS/DivXMediaServer</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.divx.update.agent.plist
- mod date: May 19 16:24:29 2014
- checksum: 3867571547
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.divx.update.agent</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/DivX/DivXUpdate.app/Contents/MacOS/DivXUpdate</string>
<string>/silent</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>10800</integer>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.kodak.BonjourAgent.plist
- mod date: Sep 21 01:39:00 2012
- checksum: 2625351456
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Kodak Version</key>
<string>7.1.6.10</string>
<key>Label</key>
<string>com.kodak.BonjourAgent</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Library/Printers/Kodak/AiO_Printers/KodakAiOBonjourAgent.app/Contents/ MacOS/KodakAiOBonjourAgent</string>
</array>
<key>ServiceIPC</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist
- mod date: Feb 15 11:22:20 2014
- checksum: 2857777334
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.oracle.java.Java-Updater</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
<string>-bgcheck</string>
</array>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>71</integer>
<key>Minute</key>
<integer>54</integer>
<key>Weekday</key>
<integer>5</integer>
</dict>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchAgents/com.parallels.mobile.prl_deskctl_agent.launchagent.plist
- mod date: Feb 24 10:45:51 2015
- checksum: 1795713191
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EnableTransactions</key>
<true/>
<key>KeepAlive</key>
<dict>
<key>PathState</key>
<dict>
<key>/etc/com.parallels.mobile.prl_deskctl_agent.launchd</key>
<true/>
</dict>
</dict>
<key>Label</key>
<string>com.parallels.mobile.prl_deskctl_agent.launchagent</string>
<key>LimitLoadToSessionType</key>
<array>
<string>Aqua</string>
<string>LoginWindow</string>
</array>
<key>Program</key>
<string>/Applications/Parallels Access.app/Contents/MacOS/Parallels Access Agent.app/Contents/MacOS/prl_deskctl_agent</string>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.wacom.wacomtablet.plist
- mod date: Oct 11 17:37:46 2013
- checksum: 2972905917
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EnvironmentVariables</key>
<dict>
<key>RUN_WITH_LAUNCHD</key>
<string>1</string>
</dict>
<key>KeepAlive</key>
<dict>
<key>SuccessfulExit</key>
<true/>
</dict>
<key>Label</key>
<string>com.wacom.wacomtablet</string>
<key>LimitLoadToSessionType</key>
<array>
<string>Aqua</string>
<string>LoginWindow</string>
</array>
<key>Program</key>
<string>/Library/Application Support/Tablet/WacomTabletSpringboard</string>
<key>RunAtLoad</key>
<true/>
...and 4 more line(s)
Contents of /Library/LaunchAgents/org.macosforge.xquartz.startx.plist
- mod date: Aug 11 16:52:54 2014
- checksum: 2451978492
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>org.macosforge.xquartz.startx</string>
<key>ProgramArguments</key>
<array>
<string>/opt/X11/lib/X11/xinit/launchd_startx</string>
<string>/opt/X11/bin/startx</string>
<string>--</string>
<string>/opt/X11/bin/Xquartz</string>
</array>
<key>Sockets</key>
<dict>
<key>org.macosforge.xquartz:0</key>
<dict>
<key>SecureSocketWithKey</key>
<string>DISPLAY</string>
</dict>
</dict>
<key>ServiceIPC</key>
<true/>
<key>EnableTransactions</key>
<true/>
...and 2 more line(s)
Contents of /Library/LaunchDaemons/com.autodesk.backburner_manager.plist
- mod date: Feb 4 12:44:56 2013
- checksum: 3394451584
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<dict>
<key>PathState</key>
<dict>
<key>/usr/discreet/backburner/nrapi.conf</key>
<true/>
</dict>
</dict>
<key>Label</key>
<string>com.autodesk.backburner_manager</string>
<key>ProgramArguments</key>
<array>
<string>/usr/discreet/backburner/backburnerManager</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.autodesk.backburner_server.plist
- mod date: Feb 4 12:44:56 2013
- checksum: 2405015914
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<dict>
<key>PathState</key>
<dict>
<key>/usr/discreet/backburner/nrapi.conf</key>
<true/>
</dict>
</dict>
<key>Label</key>
<string>com.autodesk.backburner_server</string>
<key>ProgramArguments</key>
<array>
<string>/usr/discreet/backburner/backburnerServer</string>
</array>
<key>Nice</key>
<integer>18</integer>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.autodesk.backburner_start.plist
- mod date: Feb 4 12:44:56 2013
- checksum: 597826117
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>RunAtLoad</key>
<true/>
<key>Label</key>
<string>com.autodesk.backburner_start</string>
<key>ProgramArguments</key>
<array>
<string>/usr/discreet/backburner/backburner</string>
<string>boot</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.makerbot.conveyor.plist
- mod date: Dec 2 11:47:26 2013
- checksum: 147573995
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>Label</key>
<string>com.makerbot.conveyor.daemon</string>
<key>WorkingDirectory</key>
<string>/Library/MakerBot</string>
<key>ProgramArguments</key>
<array>
<string>/Library/MakerBot/conveyor-svc</string>
<string>--config_file</string>
<string>/Library/MakerBot/conveyor.conf</string>
</array>
<key>KeepAlive</key>
<true/>
<key>EnvironmentVariables</key>
<dict/>
<key>RunAtLoad</key>
<true/>
<key>UserName</key>
<string>_conveyor</string>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchDaemons/com.parallels.mobile.dispatcher.launchdaemon.plist
- mod date: Feb 24 10:45:50 2015
- checksum: 1994226602
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>ExitTimeOut</key>
<integer>150</integer>
<key>Label</key>
<string>com.parallels.mobile.dispatcher.launchdaemon</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Parallels Access.app/Contents/MacOS/Parallels Access Dispatcher Service.app/Contents/MacOS/prl_pm_service</string>
<string>-e</string>
<string>--logfile</string>
<string>/var/log/prl_disp_service_server.log</string>
<string>--pidfile</string>
<string>/var/run/prl_pm_service.pid</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.parallels.mobile.kextloader.launchdaemon.plist
- mod date: Feb 24 10:45:51 2015
- checksum: 3938648138
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>ExitTimeOut</key>
<integer>150</integer>
<key>Label</key>
<string>com.parallels.mobile.kextloader.launchdaemon</string>
<key>ProgramArguments</key>
<array>
<string>/sbin/kextload</string>
<string>/Applications/Parallels Access.app/Contents/Library/Extensions/10.9/prl_virtual_sound.kext</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /private/etc/ssh_config
- mod date: Nov 19 19:03:16 2012
- checksum: 1281775184
Host *
SendEnv LANG LC_*
Host *
XAuthLocation /opt/X11/bin/xauth
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
- mod date: Jan 20 19:45:18 2011
- checksum: 408149527
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.adobe.ARM.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>12600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
- mod date: Jan 29 16:03:43 2010
- checksum: 2544798274
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.adobe.ARM.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Adobe Reader 8/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>12600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
- mod date: Sep 11 18:20:35 2011
- checksum: 2170691092
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.adobe.ARM.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Adobe Reader 9/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>12600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
- mod date: Oct 19 12:47:52 2009
- checksum: 10744905
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.adobe.ARM.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Adobe Acrobat 8 Professional/Adobe Acrobat Professional.app/Contents/MacOS/Updater/Adobe Acrobat Updater Helper.app/Contents/MacOS/Adobe Acrobat Updater Helper</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>12600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.apple.FolderActions.folders.plist
- mod date: Jan 30 08:36:08 2015
- checksum: 1189540302
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.apple.FolderActions.folders</string>
<key>Program</key>
<string>/usr/bin/osascript</string>
<key>ProgramArguments</key>
<array>
<string>osascript</string>
<string>-e</string>
<string>tell application "Folder Actions Dispatcher" to tick</string>
</array>
<key>WatchPaths</key>
<array/>
</dict>
</plist>
Contents of Library/LaunchAgents/com.apple.SafariBookmarksSyncer.plist
- mod date: Dec 18 09:24:48 2008
- checksum: 3493273791
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.apple.Safari</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Safari.app/Contents/SafariSyncClient.app/Contents/MacOS/S afariSyncClient</string>
<string>--sync</string>
<string>com.apple.Safari</string>
<string>--entitynames</string>
<string>com.apple.bookmarks.Bookmark,com.apple.bookmarks.Folder</string>
</array>
<key>RunAtLoad</key>
<false/>
<key>ThrottleInterval</key>
<integer>60</integer>
<key>WatchPaths</key>
<array>
<string>/Users/USER/Library/Safari/Bookmarks.plist</string>
</array>
</dict>
...and 1 more line(s)
Contents of Library/LaunchAgents/com.citrixonline.GoToMeeting.G2MUpdate.plist
- mod date: Dec 15 10:55:51 2014
- checksum: 3001252484
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.citrixonline.GoToMeeting.G2MUpdate</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Application Support/CitrixOnline/GoToMeeting/G2MUpdate</string>
</array>
<key>StartInterval</key>
<integer>3660</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.parallels.mobile.startgui.launchagent.plist
- mod date: Mar 10 23:00:25 2015
- checksum: 662430762
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>ExitTimeOut</key>
<integer>150</integer>
<key>Label</key>
<string>com.parallels.mobile.startgui.launchagent</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Parallels Access.app/Contents/MacOS/prl_deskctl_wizard</string>
<string>--autorun</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of Library/LaunchAgents/com.valvesoftware.steamclean.plist
- mod date: Mar 7 15:48:06 2014
- checksum: 1327160095
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.valvesoftware.steamclean</string>
<key>Program</key>
<string>/Users/USER/Library/Application Support/Steam/SteamApps/steamclean</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Application Support/Steam/SteamApps/steamclean</string>
<string>Public</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>SteamContentPaths</key>
<array>
<string>/Users/USER/Library/Application Support/Steam/SteamApps</string>
</array>
<key>WatchPaths</key>
<array>
<string>/Applications/Steam.app</string>
</array>
</dict>
</plist>
App extensions
com.google.GoogleDrive.FinderSyncAPIExtension
com.parallels.desktop.console.Resource-Monitor
Installations
Topaz Detail2: 11/15/12, 2:58 PM
Topaz DeNoise 5: 11/15/12, 2:57 PM
Topaz Adjust 5: 1 -
Unable to connect to Office Wireless Network (802.1x) after Windows Update
Hi, my notebooks are on Windows 7 Enterprise 64bit. We have only recently started Windows Updates.
We are on a Wireless network 802.1x.
In the past, we are able to do the following steps :
1. Open the "connections are available" window by clicking on the wireless icon (signal bars with yellow sun)
2. Right click on the desired network and choose properties
3. Change settings (eg. MEAP or use local Windows credentials etc)
4. Click connect to connect
Now, from the "connections are available" window, when we right click on the desired Network, only "connect" is shown.
In this case, I cannot connect to the network as the settings are wrong, if I cannot connect to the network how do I change the settings ?
Please kindly adviseHi,
I agree with britishdhez.
In addition, I would like to confirm which update caused this issue. Is it a driver update? I suggest installing driver update from the manufacturer's website.
You can also reinstall the wireless driver:
a. Click Start, type "devmgmt.msc" (without quotation marks) in the Search bar and press Enter.
b. Expand "Network adaptor".
c. Right click on your network card and then click Uninstall
d. Remove the driver software at the same time.
After that, restart the computer and reinstall the network card driver.
Meanwhile, you may run the Network troubleshooter to see if it can help diagnose and solve your problem:
Using the Network troubleshooter in Windows 7
http://windows.microsoft.com/en-sg/windows7/using-the-network-troubleshooter-in-windows-7
Also, please remove the wireless network profile for a test.
Delete a profile
At the command prompt ( Win+ R-->CMD ), type:
netsh wlan delete profile name="ProfileName"
For you reference: Netsh Commands for Wireless Local Area Network (wlan)
http://technet.microsoft.com/en-us/windows//aa905085.aspx
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support -
T60 WLAN COMPLETELY GONE after installing latest Update Intel Wireless WiFi Link for Windows XP
I just reinstalled a T60 from scratch TWICE to the point of updating - Intel Wireless Wifi Link for Windows XP -
Just after that very latest Update (3.1.1.1 or so?) there is no WLAN possible and I had to find out, that a system restore is impossible either! (Simply does not work and asks me to get another point and try again)
I have a full backup done by acronis 2010 so that does not bother me so very much.
The point is that I like to WARN everybody to install that Update to their T60 e.g. 2008YWJ !!!
(contains 3945AGB WLAN Module!)
After Updating U HAVE NO CHANCE TO REPAIR IT! U get always the problem signature
szAppName: AcSvc.exe szAppVer: 5.6.1.33 szModName: PfMgrApi.dll
szModVer : 13.0.0.2 offset: 000d4912
and the System wants to report that stuff to MicroSoft...again and again...every time u
start AccessConnections.
U can DEinstall AccessConnections and Intel Wireless Wifi Link for XP completely, reboot
and REinstall it....just 2 get the same messages and NO WLAN anymore.
I could not get out of this Driver Installation Hell until I did a complete Recovery Install and
I got back to Hell when System Update REinstalled Intel Wireless WiFi Link for XP
automagically...;-(((
And again NO CHANCE to roll back, No chance to get rid of that annoying bug. This time I have an ACRONIS-Image so I can spare some time....
Somebody shoud really CHECK this, because it should not be possible to break down an completely NICE RUNNING Thinkpad THIS WAY just by updating it! As it took me abaout 12 Hours of Administration by now I
really would apreciate to help whomever to find out what the hell is responsible 4 this !!!
Why is XP System Restore not working on an T60 to roll back to Point b4 installation of this Update???
(I could not use that Thinkvantage-System Recovery because it did not even get all its updates by the
time the system went in limbo during install! What i defintely can say is that it breaks at exactely
same point when Intel Wifi Updates is installed...
I do my Acronis Restore now and try 2 avoid this Update....;-(
if anybody KNOWS how to get that system 2 an earlier point of an install orgy i whould be thankful to get that information...
I am keeping alive 12 Thinkpads here R40 R50 T42 T43 T60 T61p T400 T500 and NEVER
experienced problems like this in many years!
cheers
GAL9000gal9000, welcome to the forum,
have you tried running windows system restore from safe mode? It usually works then because some anti-virus softwares will prevent it from running successfully from "normal" windows.
Hope this helps.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog -
Wireless Problem in windows 7 intel wifi link 5100agn
i bought a dv7 1270us laptop in january. everything was fine until the last 3 months i started having small problems in vista. it would take 10+ minutes to connect and the speed would go up and down. then i installed windows 7 and am either having problems with the card or driver but ive tried every driver i can find and nithing has worked.. the wireless drops randonly. when it drops it doesnt lose connection the signal drops all the way down to one bar and i get maybe 10Kbps of bandwith well it takes 2 minutes to load a page of this forum atleast. When it drops it also only drops for maybe 5-10 minutes or else it stays like that until i restart but resarting always fixes it tempoparily for 10 minutes or so. toaday i tried to disconnect and reconnect to my network. as soon as i cicked connect i got a blue screen it pointed torwards netw5v64.sys i have tried re installing the drivers multiple times and the problem isnt resolved. i have sent the laptop in twice in the last 2 months one for the blue ray drive and wireless problems i am having now. they sent it back with a new blue ray drive and a new antenna for my wireless saying the card was fina it was a driver and maybe a new antenna would help with connectivity. well they were wrong. i got it back and it started overheating to 90+ degrees celcius and wireless problems were still there even though they re-imaged the hard drive so all drivers should be perfect.so i sent it back again. now i just got it back and they cleaned the heatsink and completely ignored my wireless problems. the sheet that states the repairs that were done has a circle aroubd cleaned heatsink/fan and thats it n comments or anything. then to make the icing on the cake there is a 3 inch long fairly deep scrath on my laptop i take verygood care of all of my laptops so that i can sell them used for more than a scratched up one. i am very disappointed in hp and almost dont want to send it back and loose it for another week just to get it back without anything being done again i am almost certain they would re0image the hard drive again and send it back since they didnt even do that the second time. okay back on topic is there anything anyone has heard t fix this so i dont have to send it in again. any help is appreciated
Intel! They make processors and a variety of motherboard hardware, but they seem to have a devil of a time making decent drivers. Particularly with their wireless NICs. Lately I’ve noticed a number of errors springing from the Intel WiFi Link 5100/5300 AGN family of wireless adapters. They seem to cause random bluescreen errors on Windows Vista systems. Fortnuately, there is a viable workaround:
-Right click on Computer and select Manage.
-After Computer Management opens up, go to Device Manager.
-In Device Manager, expand the Network Adapters category.
-Right-click on “Intel (R) WiFi Link 5100 AGN” and select Properties.
-In Properties, go to the Power Management tab.
-Under the Power Management tab, make sure that “Allow the computer to turn off this device to save power” is unchecked.
Apparently, the driver for the WiFi Link 5100 can’t properly handle the device going to sleep, and pulls down the whole system. Hopefully Intel will fix this in future driver updates. Until then, this workaround will have to do. -
Windows 7 and Wireless Mighty Mouse, Wireless Keyboard and sound problem
Hi,
I just installed Windows 7 x64 Ultimate on my iMac 24" white ( OS X Leopard 10.5 ). Surprisingly, it installed without any problems. The only problems I have now are the Wireless Mighty Mouse and the Wireless Keyboard ( alu ).
After I installed Windows I inserted the Leopard Instal DVD and installed Boot Camp. I got a message right away saying that: "This program has known compatibility issues...". I clicked Run program and continued. Soon I got the same warning, but this time not for Boot Camp, but Intel Chipset Device Software. I clicked Run program yet again and it continued installing. Then I got a different warning: "Service KeyAgent' failed to start. Verify that you have sufficient privileges to start system services." I clicked Ignore and installation continued. I got another "Service Mac HAL' failed to start. Verify that you have sufficient privileges to start system services." warning, clicked Ignore again and after that it finished soon and I restarted the computer.
When I came back into Windows there was no Apple folder anywhere or any sign that I have just installed Boot Camp ( should there be? )
I installed Boot Camp Update 2.1 for Windows XP ( because Vista x64 version wouldn't start ) and basically I got the same warnings I did when I installed Boot Camp from the Leopard DVD ( described above ). I also tried to instal Boot Camp Update 2.2 for Windows, but it didn't start. I also downloaded Bluetooth Update 1.0, but all I got was a message saying: "This update is not intended for this computer and will not be installed.".
There is also no sound.
This is basically it, I really hope some of you who run Windows 7 with wireless keyboards and mice can help me, because I desperately need this to work ( I use a Windows only program for school ).
PS. I have a 2007 iMac 24" white and while it is not on the we're-not-supporting-that list for the infamous Windows 7 Boot Camp update, all other iMacs from its generation are. Any ideas?Found a solution for the "Boot Camp x64 is unsupported on this computer model" message. Here is the link: http://www.techulous.com/hardware/how-to-apple-boot-camp-64-bit-for-windows-7-on -unsupported-macs.html
Everything works ( for ) now. Yay!
Maybe you are looking for
-
Transaction Launcher for Multi Client system
Hi Gurus, I need a very big help. This is my problem: The CRM system on which I'm currently working has two client 1 and 2 and the second one is closed to customizing, so that all the settings we can make are on 1. When we create a transaction lauche
-
GET_PRINT_DOCUMENT returns empty PDF
I'm attempting to use the GET_PRINT_DOCUMENT API to create a pdf report and store it in a table. However, the api always returns an empty BLOB. The test report for the Report Query, 'testSQL', runs fine. The 'After Submit' process is as follows: DECL
-
Attach GOS attachments with a standard send mail functionality
Hi Folks, I am here after long time and need your help. I have a requirement where I need to attach document with a standard send mail functionality. Below is the details: From Quality notification 'Action Box', if the user select a perticular action
-
beim Itunes starten kommt eine Meldung: ITunes was not installed correctly, pleas reinstall Itunes. Error 7 (Windows error 126) MSVCR80.dll fehlt. Was soll ich tun? Danke für Hilfe
-
Hi All, I try to export my work in Premiere CS3 as animated Gif... I DONT find the Animated gif format in the Available Formats when i choose : Export>Movie>settings>file Type... I am using CS3 an an iMac running OS10.5.3 Please Help Me Thanks