Windows Update last Tuesday and Windows 8.1 Freezing, applications crashing
We have number of Windows 8.1 Dell OptiPlex 9020 Machines 64bit with Office 2013 with all latest updates and SCEP 2012 on it. We have noticed that number of machines started to freeze and crash applications like Word, Outlook, Excel. We have done system
restore and looks like computers are working again but they will pull updates over night again. Does anybody knows if there are any issues with last week updates from Microsoft, and did anybody experienced similar issues
Thanks
I have noticed that I have a lot Event ID 1001 between Windows Defender and System Centre End Point Protection. However, most of the Windows 8.1 computers are not showing the same symptoms. Here are the events 1001:
Fault bucket , type 0
Event Name: MpTelemetry
Response: Not available
Cab Id: 0
Problem signature:
P1: Windows Defender (77BDAF73-B396-481F-9042-AD358843EC24)
P2: 4.4.304.0
P3: TimeOut
P4: 1.1.10802.0
P5: fixed
P6: 8 / 2049+
P7: 5 / not boot
P8:
P9:
P10:
and
Fault bucket , type 0
Event Name: MpTelemetry
Response: Not available
Cab Id: 0
Problem signature:
P1: System Center Endpoint Protection (DDEFDD14-250E-4DC8-A0B3-9D667EC5D8EB)
P2: 4.5.216.0
P3: TimeOut
P4: 1.1.10802.0
P5: fixed
P6: 8 / 2049+
P7: 5 / not boot
P8:
P9:
P10:
Similar Messages
-
I cant get my iphone to show up in my itunes. I downloaded the new update last night and I havent been able to sync it since
See section 5 of TS1538: iOS: Device not recognized in iTunes for Windows.
If that doesn't help it may pay to tear down and reinstall iTunes in the following manner...
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I need help :-(
Did an IOS update last week and after the Ipad rebooted it said slide to unlock then asked for a passcode to be entered..... I have never set a passcode ever ??
What number do I enter to unlock the Ipad ... have tried the usual 0000 and 9999 etc but just locks me out .... HELP !!!
Or is there a way to go back to factory settings ?? (Without losing my Apple ID etc)
ThanksIf this was your first update to iOS 7 then you were asked to CREATE a passcode. Also there would have been a small Skip button to avoid creating the passcode. If, when you encountered that request you went ahead and entered a passcode number then you must use that number to unlock your device. Once the device is unlocked you can change or delete the passcode using the Settings app.
To completely remove the passcode lock you need to connect your iPad to the computer you normally sync with and restore the iPad. This will erase all data on the iPad so be sure your info, photos, etc. are backed up first. -
Why won't 'Address and Search' from 'Customize Toolbar' box 'stick' when I drag it to my toolbar? I ran updates last night, and my Google searchbox disappeared and I can't get it back.
Safari 6 ?
URL address bar and Google search field are combined together in Safari 6.
Apple calls it Smart Search field.
There is no way to separate them. -
I am not getting my iCloud or other mail thru...I had an update last week and it quit also. I simply turned mail off and on and it solved the problem. Now simply nothing is coming thru....I think I've tried everything....can anyone give me suggestions
I am not getting my iCloud or other mail thru...I had an update last week and it quit also. I simply turned mail off and on and it solved the problem. Now simply nothing is coming thru....I think I've tried everything....can anyone give me suggestions
-
Downloaded the iOS5 last Tuesday and since then have to charge my iphone 4 twice a day, has anybody else had similar problems?
Try restoring as new, i.e. without your backup.
http://support.apple.com/kb/HT1414 -
Installed Office update last week and now Word crashes every time I use it
Installed Office update last week and now Word quits unexpectedly every time
Have you checked Microsoft office for mac support? http://www.microsoft.com/mac/support
-
I updated to ios8 and tried to use Health Application. In Sources I get a message that other applications will show up on the list as they request permission to update your data. How does it happen? No apps are listed on my Sources section
I have an answer to my question. There is a bug in IOS8 that prevents third party applications to talk to the Health Application. Apple is trying to fix it ASAP
-
Update Install Paused - and when resumed Adobe Content Viewer Crashes
Hello,
I am trying to update a file through the Digital Publishing Suite, however it seems suck on an 'Update Install Paused' phase.
The only button that I can press is RESUME, and when I do the application crashes. There is no Archive button for the particular
document I am trying to update.
I tried unsharing/unplublishing and deleting it from the Publishing Suite deck. And loaded a new one. But it doesn't dissapear
from ACV, nor does it get updated with the new file.
HELP PLEASE!!! Thanks,
AdrianaI'm having the same problem. I read on a thread from Adobe Staff, Bob Bringhurst that it's a known bug. He recommends "archiving" the download items and trying again. My problem is I can't get the archive button, only resume downloading. Like you, it crashes when you try to "resume". It's so frustrating.
-
My iphone 4s crashes too much when i download and app from store and open it its freeze or crash and restart the phone i think i am having big problem with this device i restored it to factory settings and no waay!
I think many of us need a Defense Against the Podcasts App professor.
Have you looked at this Apple support page?
http://support.apple.com/kb/HT6190?viewlocale=en_US&locale=en_US -
How do I get out of recovery mode, that my ipod touch suddenly went into, after updating last night? It does not recognize my ipod anymore and I don't want to restore it back to factory conditions. I have tons of things on the ipod and don't want to lose them! Is there any other way to get out of this 'recovery mode'??
No. You have to restore. To allow the restore try the following:
- A reset.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Manually placing the iPod in Recovery Mode
- Placing the iPod in DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If you can't turn the iPod off, let the battery fully drain. After charging for at least an hour try the above again.
- Try on another computer.
- Make an appointment at the Genius Bar of an Apple store. -
Updated ipod last night and now when turned on tells me to coonect to itunes (picture of usb cable with arrow to itunes). I can't connect to itunes on computer because apple application support can't be found. Tells me to uninstall then reinstall itunes. Will I lose all my music or is it still on my ipod?
Under normal circumstances, an uninstall/reinstall doesn't touch your content. (That being said, it's still always a good idea to maintain a current backup at all times in case of disasters.)
-
My phone is saying SIM Failure after I did update last night.
Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.) -
My wifi stopped working after a update last year and I have updated since, can this be fixe
MMy wi fi stopped working after a update early last year and I have just made do since then by using i pad at home. I was going to upgrade my phone but need to clarify if it was the upgrade that broke my wifi and can it be fixed? I have heaed of Apple replacing phones affected by this problem. Please help
Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If those solutions don't work your iPhone 4s has developed a hardware problem. The permanent solution is to get it replaced. I have not heard of Apple replacing long out of warranty iPhones.
You can search the internet for heating and freezing solutions that might work (at least for a while).
For example, see here: https://www.youtube.com/watch?v=nj10bz5bI6A -
Help!! I downloaded the update last night, and now my phone wont even turn on!
I downloaded the update last night for my Pearl Flip, and it did the usual (turn on/turn off) during the update.
When it was finished it turned off-figured it had to reboot to take effect-now it has a new hour glass on the main screen when you open it up, and wont get past the 'app world error' reset page.
It thinks/thinks/thinks and takes me about 20-30min to get the error. I've done the reset it asks me to (mainly b/c thats the only option).
So I think it's reseting, then I get the same darn thing. HELPYikes...a 200 error...while the official KB for that is not presently available, the usual fix is to reload your OS...something during the update did not go right.
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Hopefully, you already have a good backup of your data...because it is already gone.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Maybe you are looking for
-
Why would the Firewire Port and/or External DVD-RW suddenly not work?
Hi, it's me again. I swear, I must be destined to just use Windows machines... Anyways, I have a used/refurbished iBook G3 500MHz 320MB RAM Dual USB (1 Firewire)laptop running OS 10.2.8 that I bought a few months ago. I went and purchased an external
-
The waveform of output from file is different from original one
I've a new question about displaying a waveform from a text file. The waveform which its data is from file is different from the original one. I attached image files which included my two vi files and 3 waveform. In the compressed file, "ReadData_Wav
-
Mapping one node in a view context to many nodes in the component controlle
Hi guys, I need to map an element (attribute) of a node in the View Context to an attribute of multi nodes of the same type: Context View: customer_no | | -> KUNNR Component Controller Context having two nodes: - Node1 RFC1
-
Use EVALUATE_PREDICATE function as filter in an anlysis
Hi guys, I'm struggling to get the proper syntax to use the EVALUATE_PREDICATE as a filter on a column in an OBIEE analysis. I'm using an EVALUATE function to determine the rank of 'Test Naam' in the result set (CAST(EVALUATE('DENSE_RANK() OVER (PART
-
I've created some projects with Adobe Premiere Pro 1 and 2 and would like to migrate them over to my new CS3 machine. The problem is: when I copy over all the files and try and open the Premiere file I get a dialogue box that tells me "The editing mo