Windows Update on Treo Pro is Unsuccessful

Ongoing issues on Treo Pro with Windows Update application. Error Message always received is "Connection to the update server is not available. Check your data connection settings and ensure the device date and time are correct." Under the View Details section the Result code is 80072ee7. Data connection is active and functioning for internet connectivity and Microsoft Exchange active Synch. Date/time is being set by network. As such error and inability to connect is unexplained by error message. Review of Windows Mobile website did not indicate any updates available.
Post relates to: Treo Pro T850U (Unlocked)

Are you trying to update the Windows Mobile OS on your PRO?
If you are, there is no update available other than the Bluetooth download. Here is the link to the Bluetooth update.
http://kb.palm.com/wps/portal/kb/na/treo/t850/unlocked/solutions/article/15525_en.html
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/wps/portal/kb/na/treo/t850/unlocked/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

Similar Messages

Arch doesn't boot up after Windows Update on Surface Pro 3

Hi all,
I am using a Microsoft Surface Pro 3. I have a persistent installation of Arch on a USB drive. It works very well on the Surface. The only problem I am facing is, whenever I run Windows Update, I am not able to boot from the USB Arch installation after that. It just guides me to the BitLocker recovery page. The only way to boot from the USB drive is to install GRUB on the EFI partition again. It'll work until the next Windows Update, but then again the same thing repeats itself. I am stumped as to how to resolve this.
Disabling BitLocker doesn't work too, as the system then boots straight into Windows instead of going to the BitLocker recovery page.

parag14 wrote:Would efibootmgr help in any way?
You can check the boot order by using:
efibootmgr
You can set the boot order using:
# efibootmgr -o xxxx,yyyy,zzzz
Replace the letters with the bootnumbers given by the first command.
You can probably use this method to reset Arch at the top of the list rather than re-installing GRUB.

Windows 10 - Windows Updat for Officejet Pro 6830

Windows 10 Windows Update is continually failing with the following message. • HP - Enterprise WSD Multi-Function Printer, Other hardware - Null Fax - HP Officejet Pro 6830 - Error 0x80070490 This has now happened on 2 completely different PC's that use My Printer.

SOLVED !!! Take a look at the following :- http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/Error-0x8024200b/td-p/5176900 Didn't work varbatim but put Me on the right track. Here what I did. From Settings, search for "Device Manager". Under Printers I had 2 "Unidentified Printers". I Right Clicked & uninstalled both. Run Windows Update again & failed update had gone, however I was unable to print anymore. Back to Settings Initial Window & select Devices, then Printers & Scanners. I removed all entries for HP Printers, Fax etc. I then selected "Add a printer or scanner" from the top of the Printers & Scanners Menu. It searched & found My Officejet Pro 6830. I then double clicked the HP Officejet Pro 6830 Icon on My Desktop & it installed the Printer again. All now working & no more failed Windows Updates :-)

Windows 7 / HP OfficeJet Pro 8600: Unsuccessful Network Installation

OS: Windows 7 Professional 64-bit
Printer: HP OfficeJet Pro 8600
My goal is to enable the "Scan to Computer" feature of my HP OfficeJet Pro 8600 on Windows 7, which doesn't find my computer when I try to use it from the printer's front panel touchscreen. The printer's connected to my local wifi network.
In the setup program on the included CD, I've opted NOT to install any software aside from the "HP OfficeJet Pro 8600 Basic Device Software", which installs fine. I also opt NOT to install the "ePrint" web services or allow it to connect to the network for updates or share usage statistics or any of that.
During the setup program, the "Network Check" correctly finds the printer on my local wifi network, but the following "Network Printer Installation" part always fails, resulting in "Unsuccessful Network Installation", no other details. The result is the same if I retry with Microsoft Security Essentials' "Real-time protection" off, or with Windows Firewall off. No other anti-virus is running.
The "HP Scan" program fails immediately with the error message "The HP OfficeJet Pro 8600 was not found."
Under Control Panel > "Devices and Printers" I see an HP OfficeJet Pro 8600. Windows installs and prints with this printer just fine without the provided CD.
Under Control Panel > "Device Manager" the printer is NOT listed under "Imaging Devices".
My Windows Image Acquisition (WIA) service is running.
Any clues?
This question was solved.
View Solution.

(I never managed to solve this, how did this get marked "Solved?")
I'd be happy with either means of starting a scan. Here are some things I've tried since my last post (sorry, I gave up on this for 2 months and am now trying to get it working again):
I've got the printer connected by USB as well as on the network, and running the software installer with the USB connection option just gets stuck forever at the "Connect the USB Cable" screen. The USB cable is connected.
Under "Scanner Actions" on the HP Printer Assistant application, clicking "Manage Scan to Computer" reports: "Scan to Computer is enabled. You can start a scan from the printer. Your computer is not listed as an available computer on the printer's control panel. Please restart your printer and try again." Tried restarting/unplugging the printer, but that doesn't change anything.
The HP Print and Scan Doctor's first screen reports the State as "Installed" for USB and "Not Installed" for the network. It returns these results for the various steps of "Fix Scanning":
Device Manager: Pass
Driver check: Fail ("The Scan driver is unable to communicate with the product.")
Windows (WIA) scan: Fail (no information given, other than instructions to reboot)
HP Twain scan: Fail ("Scanner communication cannot be established..." dialog)
Registry: Pass
HP Scan: Pass
Since my last post I've also updated the printer's firmware, which seemed to work fine. It's now on firmware version CLP1CN1304AR.
The Windows event log reports several warnings from the software installer saying "Failed to connect to server. Error: 0x800401F0" with Event ID 1015, is this important? Tried it again with Windows Firewall off for both public and private networks, no difference.

QuickGPS on Treo Pro - Updates?

Hi there
I am using QuickGPS provided with my Treo Pro for some time now, and was asking
if there was a newer version, than that one is preinstalled.
I couldnt find any on the web, just this here:
http://www.freewarepocketpc.net/ppc-tag-quickgps.html
But when i am installing this, it won't "update" the "old" version. It is just installing beneath the other installation.
Does someone now if there is a real programm update for QuickGPS? Something newer than my? (ver. 1, build 1815.2521)
Post relates to: Treo Pro T850U (Unlocked)

How do I install AIM on my mobile device?Open the Web browser on your mobile device, and then go to http://wap.aol.com/portal/
Click the Products link at the top. Click AIM for Windows Mobile, and then follow the on screen instructions to install the AIM® software.
Message Edited by MrLourdes on 11-14-2008 06:12 PM

Intermittent Calendar Sync, Outlook 2007, Exchange 2003, Windows Mobile 6, Palm Treo Pro.

Hello,
We are having a problem with a couple of our devices, one being a Palm Treo Pro.
The users have noticed that some of the calendar appointments they receive are not always updating in either their outlook, or on their device, it is apparently random as to whether it updates to the device and not outlook or vice versa.
That is as much detail as I currently have; I am asking them to supply more observations as I know this doesn't give us alot to go on but thought I would ask in case someone else has experienced similar issues.
The other thing I noticed is that the windows update tool fails to work with the following message: "Connection to the update server not available. Check data connection setting and ensure device date and time are correct."
The date and time are correct (live in the UK) and they can access the internet and emails on the device to connection settings must be working.
Any help would be much appreciated.
Thank you,
Marc
Post relates to: Treo Pro T850 (Bell)

Is this only from the phone to the PC? Or from the PC to the phone?

Windows Update in Endless Loop of 'Installing updates" and "Undoing changes" on New Windows 8.1 Pro Install

I am setting new Windows 8.1 Pro computers, and am installing Windows 8.1 Pro to bare drives. Everything goes fine until Windows Update starts installing updates, and then the computer goes for hours installing updates, and then "We
could not complete the updates Undoing changes". It's an endless loop. It seems to be the same 38 updates. This is a recent phenomenon. I have not run into this until the last week or two on several new computer installs.
Again these are brand new installs, so something is clearly wrong with the Windows updates.
If anyone can please tell me how to avoid this, it would be much appreciated.
Michael

Hi Michael,
" This is a recent phenomenon"
Have you made any modifications to the machines ?
To resolve this issue ,running the built-in troubleshoot tool is a very good beginning .It will automatically diagnostic the windows update components and check the configurations for us .
Control Panel\All Control Panel Items\Troubleshooting\Fix problems with Windows Update
If there are antivirus software installed in these machines, please turn off them temporarily to have a check.
The command line included in the link as S.Sengupta posted is very useful and convenient to repair the windows corrupted files .We can have a try .
"sfc /scannow" ,"DISM.EXE /online /cleanup-image /restorehealth "
We also can check the windowsupdate.log for more information to troubleshoot this issue .
Run "windowsupdate.log"
If you have trouble in analyzing the log ,please upload them to the OneDrive and paste the link here .
Best regards

Windows Update Loop - Win 7 Pro - x64 :: Error 80071A91

Hi, I've been referred to this forum by the Microsoft community from this post: answers.microsoft.com /en-us/windows/forum/windows_7-system/windows-update-loop-win-7-pro-x64-error-80071a91/b17c5bc5-7977-4f8b-9b45-ecb265886381 (same as below)
Any assistance is appreciated. dave_ned at hotmail.com.
Hi,
"There is a system repair pending which requires reboot to complete. Restart Windows and run sfc again"
I've got the error (80071A91) that others have experiences while trying windows update and for the life of me I cannot get the updates to install.
Looking for the past 4 hours via Google, trying different recommended things and still no luck
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/unable-to-install-updates-getting-error-code/27a21977-f964-4376-bfab-2f29ea127c6a
# SFC /scannow causes the "repair status message" and asks for reboot.
I've downloaded fix-it, tried booting into a system repair/restore disk using command line to run
#sfc /scannow /offline....
using the dispart to LIST VOLUMES (based on this http://mikemstech.blogspot.com.au/2011/12/how-to-perform-offline-system-integrity.html )
I've tried #fsutils resourse set autorevert=true (or something, can't find the exact post as I've rebooted so many times)
I've tried dismc.exe (or similar without success)
Basically I'm stuck with these updates (~10 of them) always sitting there downloading, installing every time I shut down the PC.
Running a system repair disk created in windows still does not allow #sfc /scannow....
My Last system restore was 04/08/14 and I cannot even restore the system to this point as the restore fails and asks to remove itself once I restart the system.
Details:
OEM version of windows purchased legally and genuine microsoft logo in system dashboard.
Intel Core I5 -3330
16GB RAM
Windows 7 Pro - 64bit OS
Service pack 1
**NOTE** I have the C drive hooked up in RAID 0. Two(2) * 60GB SSD disks in RAID 0 used as C: via BIOS RAID
Secondary storage disk a D:
Been working and updating fine for the past 5-6 months.
I have the Optical drive setup as O: and a Daemon tools virtual drive as drive E:
While running DISKPART and using LIST VOLUME I see this:
currently the system seems to have lost all update history
Any information or help on this is appreciated. I don't want to reformat and reinstall, I don't really want to 'repair' and wipe my current software installation so I'm hoping there is a way.
Anyway I can get the 'pending state' removed.?
Thanks in advance
David

Hi, I've rebooted into Repair mode (Console), (because repair said windows is installed on E:) run dism.exe /image:E:\ /cleanup-image /revertpendingactions
This gave a message about small scratch space but did say something out a fix. Upon reboot into safemode with console I received the same message
"C:\Windows\system32>sfc /scannow
Beginning system scan. This process will take some time.
There is a system repair pending which requires reboot to complete. Restart Windows and run sfc again."
I then rebooted and tried SCF again, no luck... Same message, same updates still sitting there.
Partition info: (as mentioned earlier C is in RAID 0 with 2 SSD disks)
DISKPART> list volume
Volume ### Ltr Label Fs Type Size Status Info
Volume 0 O DVD-ROM 0 B No Media
Volume 1 E DVD-ROM 0 B No Media
Volume 2 System Rese NTFS Partition 100 MB Healthy System
Volume 3 C NTFS Partition 111 GB Healthy Boot
Volume 4 D GB320 NTFS Partition 298 GB Healthy

How to install Windows 8.1 update from Windows 8 on MacBook Pro)?

I have a MacBook Pro (Late 2011) running OS Mavericks and Windows 8 Pro on Bootcamp.
I want to install Windows 8.1 on my Win 8 partition, but I have no idea how to do it. Most preferably, I wouldn't want to lose all of my files.
Could someone help me with step-by-step instructions?
Thanks!

You'll be fine with 8.1 it is supported by Apple, first install the new boot camp drivers from http://support.apple.com/kb/DL1720
Launch windows update and install any requires updates then restart. Go into the (windows) App Store and you'll see the option to download 8.1. It will keep all your apps, files, etc.

In Windows 8.1 Premiere Pro video imported clips shows up black screen in Source & Work space. Everything is updated on my PC.

In Windows 8.1 Premiere Pro video imported clips shows up black screen in Source & Work space. Everything is updated on my PC. They say it could have been a Windows update? Is anyone else having this problem and found a solution any suggestions.. Thank you.

Hello, thank you for your help. I finally was able to contact someone from Adobe on line.. It took about 1 hour on hold but I finally won the lotto...Lol. Pr.. /Project/Project Settings/General/ I had the (Mercury Playback Engine GPU Accelerated (CUDA) and not the (Mercury Playback Engine Software Only) It only took 1 second for Adobe to figure it out...Lol.
Although I have a high rated Nvidia card that did handle the software for some time after a hack, I believe a Windows update may have altered my Premiere Pro CS6 settings.
Video card is Geforce Nvidia GTX 765M non compatible with (Mercury Playback Engine GPU Accelerated (CUDA). Thank Ronin Edits and cvid01

Yoga 2 Pro Can't install windows Updates

I love everything about my yoga2 pro, except, when I got it I installed a win 8.1 upgrade because windows told me to. everything seemed to be fine.
after that, the system asked me to install another upgrade. when trying to install that one it said it could not install and was undoing the changes. I read some forums awhile back and it talked about a particular update that needed to be uninstalled before you could proceed. I tried to do that, but it wouldn't let me uninstall the initial 8.1 that i installed.
i kinda let it go because it was asking me like every month or so to automatically shut me down and iinstall updates. But now it forces me to install updates every two days and then can't update so, it undoes it changes and it takes like 30-45 minutes or so. Plus, i do need to get it to be able to accept the updates at some point.
I'm thinking I have to wipe everything and start from scratch??
What should I do? And I'm certain that I didn't provide enough info to get assistance. What other info do you need to know to help me out.
Thanks,
Mike
Solved!
Go to Solution.

This sounds more like a generic Windows issue than a specific one for the Y2P. That being said have you tried the Windows Update troubleshooting tool?
http://support2.microsoft.com/gp/windows-update-issues/en-gb
If that doesn't find anything then you can reset windows update per the following (there is a "fixit" for windows 8.1)
http://support2.microsoft.com/kb/971058

Can't Change Account picture and Stuck in WIndows Update on Windows 8.1 Pro

Hi
I am facing problem on changing my account picture and windows update, both of these issue was gave me a head ache of searching best solution, but none of all of the techie "solved forums" for these both problems was solved my problems.
I had first clean install this Windows 8.1 Pro N to my laptop, and tried to change my Account Picture but personal settings is not opening, I followed all instructions from forums but none of those tricks works for me.
Now trying to Update my Windows, another problem it was stuck in Preparing to Install, another extensive searching from the internet forums, another no lucky to solve this problem, although some people works, but in mine, no luck.
Better to move down again to Windows 7.

Hello,
I'd ask in the
Windows 8.1 forum on Microsoft Community.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Please help!!! Cannot run Windows Update in Win 7 Pro after changing new hard-drive. (X201s)

Hi everyone,
I have been using my thinkpad x201s for more than one year by now. And recently I change a new and larger hard drive for my laptop. When I tried the thinkpad rescue and recovery disc on the new hard drive, everything works fine except that I cannot run Windows Updates after the installation was finished. The recovery DVDs were burned directly from the original image stored in the computer when the first I received my laptop last year.
Every time when I try to run the Windows Update, it shows the following: "Windows Update cannot currently check for updates, because the service is not running, you may need to restart your computer."
I restarted my computer later but nothing changed. Can't run Windows Updates and can't even install IE9.
I then moved back to my old hard drive and everything is normal, no problem with Windows Updates. I also tried to create a back-up image by running win 7 Backups and Restore. Later when I changed back to the new drive and followed the instructions to restore my system from the image I created earlier in a USB drive, it worked except that still the system can't run Windows Updates program.
I'm now getting very confused and upset, is it something to do with the software copyright? It's been a week now and I tried to Google the similar problem but no solutions work here. All I want to do is moving my current system to the new hard drive so that I can continue to use my laptop but it just failed updating every time.
Could anyone kindly tell me what to do when changing hard drive in order to avoid the problem I'm dealing with? Sorry I'm not a pro type user and just want my laptop to work appropriately.
My warranty has already expired so I guess the Lenovo Technical Hotline wouldn't answer my questions anymore. Please help!! Much appreciated.
Thanks so much in advance!!

I'm not sure this is the issue, but from your description, it seems as though all you have to do is activate the windows update service. If I were you, I'd search for "Services" in the start menu, open it and look for "Windows Update". Check in its properties that it is set to "Automatic (Delayed)", if it isn't, set it, and start the service, you should then be able to check for updates, be careful though that none of your other programs aren't stopping the service, usually these programs are there to "optimize your performance" or "boost your system",...
Hope this helps.

HT3986 i made a dual boot of windows 7 and mac os x lion in my macbook pro .i installed microsoft support software also. now, can i install windows updates? do i turn on the automatic updating of updates?

i made a dual boot of windows 7 and mac os x lion in my macbook pro .i installed m icrosoft support software also. now, can i install windows updates? do i turn on the automatic updating of updates?

yes you need the updates and patches.
Only some of the drivers that Windows will automatically install at times
and always make sure to insure it is using restore points
do all the maintenance andsuch as normal
use MS Security Essentials for AV is really top notch
Clean disk space
Use WinClone new program to inisure you have a restore image

I made a dual boot of windows 7 and mac os x lion in my macbook pro .i installed m icrosoft support software also. now, can i install windows updates? do i turn on the automatic updating of updates? does hot fix of microsoft helps in stop freezing?

i made a dual boot of windows 7 and mac os x lion in my macbook pro .i installed m icrosoft support software also. now, can i install windows updates? do i turn on the automatic updating of updates? does hot fix of microsoft i.e, " support.microsoft.com/kb/979491" helps in stop freezing in dual boot mechanism?

Windows has a software updater built into Windows and when you install the Boot Camp drivers then it will install an Apple software updater also. I believe Windows is set to automatically download and install your updates as does the Apple software Updater. They both will update the individual files it needs to periodically.
"Microsoft updates" and "Windows updates" are basically the same thing in Windows. Are you talking about the "Windows support software" when downloading from Boot Camp Assistant? Apple installs a software updater for it's Boot Camp drivers in Windows 7 so you can do it manually or automatically.
The "Hot Fix" your referring to is only for certain motherboards built from other Windows only computer manufacturers and does NOT pertain to any Apple computers.
If you have a problem with your computer then it's best to ask a specific question so we can help better.

Windows Update on Treo Pro is Unsuccessful

Similar Messages

Maybe you are looking for