Windows Update Stalls When Running in Windows 7/Windows Virtual PC/Win XP_ Mode
Hi
This is Bob in Tallahassee. Can anyone please help. I installed Win7 Pro on a newly built PC and then Windows Virtual PC/Win XP Mode. When I try running Windows Update in the XP mode window, it keeps cycling "searching for updates"
and never reaches the next step, never stops cycling. I checked msconfig and there is a process "svchost.exe" eating 99% of resources. It is likely related to windows update. When I shut it down, my internet connection is cut
off, but the Windows Update still keeps cycling. I have tried all I know, including optimizing bios for virtualization. Is there another setting that I'm missing? Thanks. Bob
Hi,
I find some error information in your log:
Windows Update error 80070643
http://windows.microsoft.com/en-in/windows/windows-update-error-80070643#1TC=windows-7
You can refer to this link to troubleshoot your issue:
.NET Framework update installation error: "0x80070643" or "0x643"
http://support.microsoft.com/kb/kb976982/en-us
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support
Similar Messages
-
i am running windows 7 64bit professional on an asus essentio series cm5675 i5 processor with 16gigs of ram
any reason or what is causes the update program/service to not run?Hi, here is the report generated by the Farbar Service Scanner:
Farbar Service Scanner Version: 31-05-2013 01
Ran by Owner (administrator) on 02-06-2013 at 13:50:39
Running from "C:\Users\Owner\Desktop"
Windows 7 Home Premium Service Pack 1 (X64)
Boot Mode: Normal
Internet Services:
============
Connection Status:
==============
Localhost is accessible.
LAN connected.
Google IP is accessible.
Google.com is accessible.
Yahoo IP is accessible.
Yahoo.com is accessible.
Windows Firewall:
=============
Firewall Disabled Policy:
==================
System Restore:
============
System Restore Disabled Policy:
========================
Action Center:
============
Action Center Notification Icon =====> Unable to open HKLM\...\ShellServiceObjects\{F56F6FDD-AA9D-4618-A949-C1B91AF43B1A} key. The key does not exist.
Windows Update:
============
BITS Service is not running. Checking service configuration:
Checking Start type: ATTENTION!=====> Unable to open BITS registry key. The service key does not exist.
Checking ImagePath: ATTENTION!=====> Unable to open BITS registry key. The service key does not exist.
Checking ServiceDll: ATTENTION!=====> Unable to open BITS registry key. The service key does not exist.
Windows Autoupdate Disabled Policy:
============================
Windows Defender:
==============
WinDefend Service is not running. Checking service configuration:
Checking Start type: ATTENTION!=====> Unable to open WinDefend registry key. The service key does not exist.
Checking ImagePath: ATTENTION!=====> Unable to open WinDefend registry key. The service key does not exist.
Checking ServiceDll: ATTENTION!=====> Unable to open WinDefend registry key. The service key does not exist.
Windows Defender Disabled Policy:
==========================
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender]
"DisableAntiSpyware"=DWORD:1
Other Services:
==============
Checking Start type of iphlpsvc: ATTENTION!=====> Unable to open iphlpsvc registry key. The service key does not exist.
Checking ImagePath of iphlpsvc: ATTENTION!=====> Unable to open iphlpsvc registry key. The service key does not exist.
Checking ServiceDll of iphlpsvc: ATTENTION!=====> Unable to open iphlpsvc registry key. The service key does not exist.
File Check:
========
C:\Windows\System32\nsisvc.dll => MD5 is legit
C:\Windows\System32\drivers\nsiproxy.sys => MD5 is legit
C:\Windows\System32\dhcpcore.dll => MD5 is legit
C:\Windows\System32\drivers\afd.sys => MD5 is legit
C:\Windows\System32\drivers\tdx.sys => MD5 is legit
C:\Windows\System32\Drivers\tcpip.sys => MD5 is legit
C:\Windows\System32\dnsrslvr.dll => MD5 is legit
C:\Windows\System32\mpssvc.dll => MD5 is legit
C:\Windows\System32\bfe.dll => MD5 is legit
C:\Windows\System32\drivers\mpsdrv.sys => MD5 is legit
C:\Windows\System32\SDRSVC.dll => MD5 is legit
C:\Windows\System32\vssvc.exe => MD5 is legit
C:\Windows\System32\wscsvc.dll => MD5 is legit
C:\Windows\System32\wbem\WMIsvc.dll => MD5 is legit
C:\Windows\System32\wuaueng.dll => MD5 is legit
C:\Windows\System32\qmgr.dll => MD5 is legit
C:\Windows\System32\es.dll => MD5 is legit
C:\Windows\System32\cryptsvc.dll => MD5 is legit
C:\Program Files\Windows Defender\MpSvc.dll => MD5 is legit
C:\Windows\System32\ipnathlp.dll => MD5 is legit
C:\Windows\System32\iphlpsvc.dll => MD5 is legit
C:\Windows\System32\svchost.exe => MD5 is legit
C:\Windows\System32\rpcss.dll => MD5 is legit
**** End of log **** -
Possiblely a bug - windows update error when using NAT between Hyper-V Virtual Ethernet Adapter
I'm using SCVMM managing my Hyper-V machine.
I have three physical network adapter on my hyper-v host as below:
I'm using SCVMM 2012 SP1 to create two virtual network adapter base on each Realtek controller, Bridge the traffic from the physical adapter, NAT the traffic from the internal virtual adapter to the internet facing virtual adater.
I can access the internet but i got the windows update error as below
If i NAT the internal virtual adapter traffic to the WIFI physical internal facing adapter, windows update is fine.
I'm using my hyper-v server windows NAT feature.
I did google a round, it looks like something wrong when you NAT the two virtual network adatper..
if anyone here can help, that's would be much appreciated.
2013-03-27 18:38:25:627 868 ba4 AU ## START ## AU: Search for updates
2013-03-27 18:38:25:627 868 ba4 AU #########
2013-03-27 18:38:25:627 868 ba4 AU <<## SUBMITTED ## AU: Search for updates [CallId = {F6806137-9A32-4476-AF23-38B11881056E} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
2013-03-27 18:38:25:627 868 934 Agent *************
2013-03-27 18:38:25:627 868 934 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-03-27 18:38:25:627 868 934 Agent *********
2013-03-27 18:38:25:627 868 934 Agent * Online = Yes; Ignore download priority = No
2013-03-27 18:38:25:627 868 934 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation'
or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2013-03-27 18:38:25:627 868 934 Agent * ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service
2013-03-27 18:38:25:627 868 934 Agent * Search Scope = {Machine & All Users}
2013-03-27 18:38:25:627 868 934 Agent * Caller SID for Applicability: S-1-5-21-759915917-1653667288-1560420946-1106
2013-03-27 18:38:25:627 868 934 EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL: "http://ds.download.windowsupdate.com/v10/2/microsoftupdate/redir/muauth.cab"
2013-03-27 18:38:25:627 868 934 EP Got 7971F918-A847-4430-9279-4A52D1EFE18D redir Client/Server URL: "https://fe1.update.microsoft.com/v6/ClientWebService/client.asmx"
2013-03-27 18:38:25:627 868 934 Setup Checking for agent SelfUpdate
2013-03-27 18:38:25:627 868 934 Setup Client version: Core: 7.8.9200.16465 Aux: 7.8.9200.16451
2013-03-27 18:38:25:799 868 934 EP Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SelfUpdate URL: "http://fe1.update.microsoft.com/v10/2/windowsupdate/selfupdate"
2013-03-27 18:38:25:799 868 934 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2013-03-27 18:38:25:815 868 934 Misc Microsoft signed: Yes
2013-03-27 18:38:25:815 868 934 Misc Infrastructure signed: Yes
2013-03-27 18:38:26:002 868 934 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2013-03-27 18:38:26:002 868 934 Misc Microsoft signed: Yes
2013-03-27 18:38:26:002 868 934 Misc Infrastructure signed: Yes
2013-03-27 18:38:26:002 868 934 Setup Skipping SelfUpdate check based on the /SKIP directive in wuident
2013-03-27 18:38:26:002 868 934 Setup SelfUpdate check completed. SelfUpdate is NOT required.
2013-03-27 18:38:26:440 868 934 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2013-03-27 18:38:26:440 868 934 PT + ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}, Server URL = https://fe1.update.microsoft.com/v6/ClientWebService/client.asmx
2013-03-27 18:38:28:846 868 934 WS WARNING: Nws Failure: errorCode=0x803d0014
2013-03-27 18:38:28:846 868 934 WS WARNING: Original error code: 0x80072efe
2013-03-27 18:38:28:846 868 934 WS WARNING: There was an error communicating with the endpoint at 'https://fe1.update.microsoft.com/v6/ClientWebService/client.asmx'.
2013-03-27 18:38:28:846 868 934 WS WARNING: There was an error receiving the HTTP reply.
2013-03-27 18:38:28:846 868 934 WS WARNING: The connection with the remote endpoint was terminated.
2013-03-27 18:38:28:846 868 934 WS WARNING: The connection with the server was terminated abnormally
2013-03-27 18:38:28:846 868 934 WS WARNING: Web service call failed with hr = 80240440.
2013-03-27 18:38:28:846 868 934 WS WARNING: Current service auth scheme='None'.
2013-03-27 18:38:28:846 868 934 WS WARNING: Proxy List used: '(null)', Bypass List used: '(null)', Last Proxy used: '(null)', Last auth Schemes used: 'None'.
2013-03-27 18:38:28:846 868 934 WS FATAL: OnCallFailure(hrCall, m_error) failed with hr=0x80240440
2013-03-27 18:38:28:846 868 934 PT WARNING: PTError: 0x80240440
2013-03-27 18:38:28:846 868 934 PT WARNING: SyncUpdates_WithRecovery failed.: 0x80240440
2013-03-27 18:38:28:846 868 934 PT WARNING: Sync of Updates: 0x80240440
2013-03-27 18:38:28:846 868 934 PT WARNING: SyncServerUpdatesInternal failed: 0x80240440
2013-03-27 18:38:28:846 868 934 Agent * WARNING: Failed to synchronize, error = 0x80240440
2013-03-27 18:38:28:862 868 934 Agent * WARNING: Exit code = 0x80240440
2013-03-27 18:38:28:862 868 934 Agent *********
2013-03-27 18:38:28:862 868 934 Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-03-27 18:38:28:862 868 934 Agent *************
2013-03-27 18:38:28:862 868 934 Agent WARNING: WU client failed Searching for update with error 0x80240440
2013-03-27 18:38:28:862 868 598 AU >>## RESUMED ## AU: Search for updates [CallId = {F6806137-9A32-4476-AF23-38B11881056E} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
2013-03-27 18:38:28:862 868 598 AU # WARNING: Search callback failed, result = 0x80240440
2013-03-27 18:38:28:862 868 598 AU #########
2013-03-27 18:38:28:862 868 598 AU ## END ## AU: Search for updates [CallId = {F6806137-9A32-4476-AF23-38B11881056E} ServiceId = {7971F918-A847-4430-9279-4A52D1EFE18D}]
2013-03-27 18:38:28:862 868 598 AU #############
2013-03-27 18:38:28:862 868 598 AU All AU searches complete.
2013-03-27 18:38:28:862 868 598 AU # WARNING: Failed to find updates with error code 80240440
2013-03-27 18:38:28:862 868 598 AU AU setting next detection timeout to 2013-03-27 12:38:28
Rickysome more interesting article i've found so far
http://practicalkungfu.net/2013/03/11/windows-update-error-code-8024402f-on-hyper-v-guests/
http://faultbucket.ca/2012/08/windows-server-2012-windows-update-error-0x80240440/
http://social.technet.microsoft.com/Forums/en-US/winserver8gen/thread/80548a4e-6c68-4700-a37b-9e22890bd8af
Ricky -
ImaqDisplayImage hangs when running .exe and the window can't be moved when in Debug mode
I am running a multi threaded application with multiple windows, two of which display images but only one is open all the time. The window displaying the image (using imaqDisplayImage(myImage, 1, TRUE)) can not be moved or resized, the image continually updates though, when I run the app in debug mode.
If I run an executable, either debug or release the following happens:
Everything looks good right when the app starts, all windows are displayed and the live image window is continually updated.
If I click on any window in my program or not in my program, the imaqDisplayImage window freezes and will not udate its image, it will allow me to move it though, and it has (Not Responding) in the title bar. The main window of my program does not freeze and behaves normally.
I know that an acquisition is still taking place because I have a button on my main window that copies the last grabbed image that should be displayed in the imaqDisplayImage window and displayes it on a canvas (using imaqImageToArray etc . . .) and this image changes everytime I click the button.
Anyone have any tips with dealing with imaqDisplayImage windows?? Thanks!At this point we want to pinpoint exactly where in your code this behavior is originating from. Try running the included examples which can be found here:
C:\Program Files\National Instruments\MeasurementStudio\CVI\samples\IMAQ\Display
C:\Program Files\National Instruments\MeasurementStudio\CVI\samples\Vision\1.GettingStarted
and see if you experience the same behavior. If we still experience this, then we know that it is a setting within the functions that we need to change. If not, we know that it is somewhere else in the code of the bigger project which is the culprit.
Daniel G.
Applications Engineer
National Instruments -
Error connecting to Oracle from when running SSIS Package on Windows 64-bit
Hi.
I have an SSIS (SQL Server Integration Services) Package that reads a view on Oracle and loads data into table in SQL Server 2005. This is on a Windows 2008 Server (64-bit). SQL Server 2005 with SP3. Oracle Client 11g (32 bit & 64 bit) Runtime Version installed on server. The server has been rebooted since installing OracleClient.
I get the following error when run as a SQLAgent job 64 Bit (Execution type SQL Server Integration Services Package)...
Started: 9:29:24 AM
Error: 2010-01-04 09:29:25.37
Code: 0xC0202009
Source: SADM_CURR_Address_and_Cell_Phone-Oracle Connection manager "Oracle/PeopleSoft"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040154.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
End Error
Error: 2010-01-04 09:29:25.37
Code: 0xC020801C
Source: DFT-Oracle to SS2005 OLE DB Source [1]
Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Oracle/PeopleSoft" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
End Error
Error: 2010-01-04 09:29:25.37
Code: 0xC0047017
Source: DFT-Oracle to SS2005 DTS.Pipeline
Description: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C.
End Error
Error: 2010-01-04 09:29:25.37
Code: 0xC004700C
Source: DFT-Oracle to SS2005 DTS.Pipeline
Description: One or more component failed validation.
End Error
Error: 2010-01-04 09:29:25.37
Code: 0xC0024107
Source: DFT-Oracle to SS2005
Description: There were errors during task validation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 9:29:24 AM
Finished: 9:29:25 AM
Elapsed: 1.108 seconds
When I execute this same exact package as a SQLAgent job 32-bit (type Operating System CmdExec) it runs successfully. When I run the package using the Execute Package Utility, it runs successfully. When I am editting the package in BIDS I can connect to Oracle. For both 64 and 32 bit, I use a dtsconfig file which specifies the Oracle connection string and password.
Someone mentioned on another forum that maybe there is no Oracle ODBC driver for 64-bit Windows. I would assume that the OracleClient 64-bit would include that.
I hope I have included all info needed. Please let me know if you may have a resolution to this problem.
Thanks.
JohnI was trying to transfer data from oracle to sql server 2008 on a daily basis.
I have very hard time connecting to oracle from ssis package on windows server 2008. I am almost dead and cannot find any help. i was able to connect to oracle using import/export 64 bit feature of SQL Server 2008 using Oracle provider for OLEDB. But I am not sure why the same does not work with BIDS?
Here's the environment info:
1. Oracle Client 10g
2. SQL Server 2008
3. Windows Server 2008
Appreciate your help. Please save me.
Thanks, -
Windows update fails when isatap enabled
Hi there,
I'm using windows 8.1 pro x64 and encounter one problem.
My desktop has only one ethernet adapter, and I've disabled its ipv6 protocol. Insteadly, I use isatap tunnel to access ipv6 network.
The problem is that, if the isatap tunnel works, windows update will try to fetch updates via ipv6 and fail; while if I diable the isatap tunnel, windows update will work fine.
I wonder how to force windows update to use ipv4 access while isatap tunnel enabled.
Thanks!Hi,
We cannot force Windows update to use ipv4 or ipv6.
In default Windows prefix policy,IPv6 addresses are preferred over IPv4 addresses.
I suggest we add a prefix policy to prefer IPv4 addresses over IPv6 to test it.
Please follow the steps:
1.Press Win+R, type regedit, and press enter.
2.In Registry Editor,locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters \
3.Double-click DisabledComponents to change the DisabledComponents entry.
Note If the DisabledComponents entry is unavailable, you must create it.
To do this, follow these steps:
a.In the Edit menu, point to New, and then click DWORD (32-bit) Value.
b.Type DisabledComponents, and then press ENTER.
c.Double-click DisabledComponents.
4.Type 0x20 to prefer IPv4 over IPv6 by changing entries in the prefix policy table.
Regards,
Kelvin hsu
TechNet Community Support -
I've noticed FF 6.0.2 windows update faster and downloads stay active when the mouse pointer is over a FF window and moving. I've "played" with the download window. When I allow the pointer to just sit, the download usually stops. When I move the pointer, the download resumes. This is verified by the lights on the cable modem showing changes in internet activity.
The same appears true in cases like the FF help search. Type a question and hit return and screen stalls. Move the mouse and the screen refreshes.Hello,
I am not very familiar wth Microsoft Security Essentials, but believe that it just makes use of the existing Windows Firewall which is present with the operating system.
To me it is odd that the guest OS reports 192.168.1.254 as the IP address for its gateway and DHCP server yet it cannot access them when pinged. Let's try pinging from host to guest (and vice-versa) and see what happens:
From the host OS at 192.168.1.78, try pinging the guest OS at 192.168.1.75.
Then, from the guest OS at 192.168.1.75, trying ping the host OS at 192.168.1.78.
Is each operating system able to ping each other?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Sysprep /generalize resets windows update cache. (3 machines 3 different windows updates results)
Hello,
I have a process monthly that I run windows updates on all physical and virtual server templates.
once this process is complete I sysprep all of the templates to create images.
- upon bootup I am getting inconsistent results from all of the
operating systems ( missing windows updates ) and the update history is reset every time.
Some months the windows update history is correct and there are no updates missing, but other months there are tons of missing updates.
For example I just did a test from the same template
- first machine 60 missing updates
- second machine 38 missing updates
- third machine 45 missing updates.
what I'm looking to do is save time by not having to re-run windows update every time for deployment.
I know the templates are up to date I've even verified with the baseline security analyzer.Hi mobious,
Could you try to use the SkipRearm option to sysprep the image again? As far as I know the sysprep operation won’t configure the update related options, Microsoft recommends
that you use the SkipRearm setting if you plan on running Sysprep multiple times on a computer.
More about the Sysprep works
How Sysprep Works
https://technet.microsoft.com/en-us/library/cc766514(v=ws.10).aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Windows Update installs older Canon MG4100 drivers in Windows 8/8.1
When I turn on the MG4120 printer and the printer is already setup for wireless and I have WSD enabled, Windows 8 or 8.1 automatically installs older Canon MG4100 drivers from Windows update. The same thing happens if I connect the USB printer before installing the Canon software from the website and the same issue also happen in wireless mode. The version that gets installed by Windows Update is the same version listed in the catalog at http://catalog.update.microsoft.com/v7/site/Search.aspx?q=mg4100.
Windows 8,Windows 8.1 Drivers,Windows Vista Drivers (Printers) 8/16/2011 2.50.2.70
Windows 7 Drivers (Printers) 3/13/2012 18.0.2.31
Canon, can you please submit the newer printer driver to microsoft Windows Update?Hi KeithWeisshar,
WSD drivers are supplied and supported by Microsoft. The version numbers and dates are not comparable to the numbers and dates for our drivers. While WSD will provide you with basic printing capability and some features, to get the most from your printer, I recommend using the drivers found on our website.
If you have any other questions, please feel free to Contact Us!
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
Windows update requirements for Xerox print drivers on Windows 2003 server
Hello, We are currently deploying a fleet of Xerox MFD's across ~100 locations, and we are running into an issue installing the print drivers on some Windows Server 2003 (32bit) boxes. (both the machine specific driver, as well as the Xerox Global print driver) The print driver installs fine, but no jobs will actually print, and if you try and print a test page, an error "Test page failed to print. Would you like to view the print troubleshooter for assistance?" comes up instantly. We have seem to have narrowed the problem down to a missing Windows update, as if we do all available High Priority and Optional updates, it starts to work fine. Does anybody know specifically which Windows updates are a requirement for the driver? Our 2003 servers were last fully updated about a year ago, and due to time constraints, if we could just install the Windows updates that are needed it would be a big help. Thank you in advance
When Xerox dropped support for XP, they stopped adding particular files from the driver packs (probably for size reduction) because they were all included by default in every newer OS. If you install this here on any XP/2003 base machines it will work as normal. It is best to install that before the driver install, but I have been mostly lucky to have it work fine days later. YMMV
-
RRCPT does not add the URL (update sites) when run the AUT.
Hello,
I would like to ask two question:
1 ) Why RRCPT not add the update sites url of my Eclipse when running it through RRCPT.
I have checked it by running the APP without RRCPT and the urls are ok (by default), but not when running it with RRCPT.
Is it a bug or am I missing something? I have attached a screenshot of both situations in order to clarify.
2) Is there a problem when a make a test which restart the AUT? Basically, when I run this kind of test, the AUT does work similar as the first run.
Regards,
Agustin CelentanoHi Ulyana,
2) When I restart the AUT through a test, I get this exception.
Failed to close report node
java.lang.NullPointerException
at restart-studio (/studio-q7-sanity/recorder.test:1)
Connection is not Available
Stack Trace: Connection is not Available
java.io.EOFException
at java.io.DataInputStream.readByte(DataInputStream.java:267)
at org.eclipse.rcptt.ecl.internal.core.EMFStreamPipe.take(EMFStreamPipe.java:91)
at org.eclipse.rcptt.ecl.client.tcp.EclTcpSession.writeOutput(EclTcpSession.java:199)
at org.eclipse.rcptt.ecl.client.tcp.EclTcpSession.access$6(EclTcpSession.java:196)
at org.eclipse.rcptt.ecl.client.tcp.EclTcpSession$1.run(EclTcpSession.java:96)
at java.lang.Thread.run(Thread.java:745)
It seems to lose the AUT connection
Regards,
Agustin Celentano -
Office 2013 windows 'pop-under' when run as remote apps on Server 2008R2 from Windows 7 clients
We have an environment with Windows 7 clients running Office 2013 via RDS on Windows Server 2008R2.
When users double click emails from Outlook, they 'pop-under', forcing the user to relocate the window which has fallen behind the application's primary window, leaving behind a slight redraw of what is supposed to be the pop-up window. Users also experience
difficulty opening application menu/help items and any other dialogue boxes in any/all of the other Office 2013 apps we've deployed via RDS.
This issue persists only on Win7 PCs (WinXP does not exhibit this behaviour). The RDP clients range from 6.2.92 to 6.1.7601
We have applied the hot-fixes applicable to all of the following KB articles:
- KB983533 (failed / update not applicable)
- KB2384602 (failed / update not applicable)
- KB2614136 (failed / update not applicable)
- KB2580346 (Installed successfully, but issue unresolved)
- KB2522762 (Installed successfully, but issue unresolved)
- KB2538047 (Installed successfully, but issue unresolved)
- KB2604066 (Installed successfully, but issue unresolved)
- KB2705427 (Installed successfully, but issue unresolved)
- KB2682814 (Installed successfully, but issue unresolved)Hi,
Please give the new Remote Desktop Client 8.1 for Windows 7 a try when it is re-released (it was removed temporarily due to an issue with smart cards). It has fixes related to z-order issues, which
may correct the problem you are seeing.
Update for RemoteApp and Desktop Connections features is available for Windows
http://support.microsoft.com/KB/2830477
Thanks.
-TP -
Flash Player Update won't run properly on my Windows Vista / IE 9
I am having problems with updating the Adobe Flash Player. The player is installed and recognizes that an update is available. I select to download and install the update and an internet explorer window opens and I am given the opportunity to click the "Download Now" button. However once i do the screen changes for a while to a progress bar titled "Step 1 of 3" and "Initializing" which then changes to "Step 2 of 3" that shows "If you encounter any issues downloading Adobe Flash Player, Click here." but never does anything else. When I take advantage of the 'click here' option or the "Need Help?" prompt in the upper right corner I get another screen overlay showing the following. The problem is I am not getting any of the prompts shown below. It is as if the download never started. And no the prompts shown below are not really apearing and just hiding behind another open window on my screen. It seems to me that the update and download functions are broken. The same thing happens if i go directly to the ADOBE site and try to initiate the install or updates directly from there. Can someone help with this?
1.
When File Download dialog box appears, click Run. Security scan will run automatically.
2.
When User Account Control dialog box appears, click Yes.
Note : If you are still unable to download Adobe Flash Player, click the Back button on your browser. Then click Install/Download now and select the option to Save and Run.Hi jwklingon,
Thanks for confirming the behaviour, much appreciated. The online installer that you were using (aih in the file name) downloads the Flash Player installer silently in the background and installs it silently. It appears that, for some reason, the download was not occurring. The link Andy provided has the offline installers, which are the full installers and don't download anything in the background. Those should work on your system. If it doesn't, please provide a screenshot of the error the displays, if any.
Thank you.
Maria -
No update folder when installing mac drivers on windows
Okay... I love this forum so much. Any way i get an error when attempting to installing the exe file for the drivers install for windows xp pro sp2 (should be sp2 ill check to make sure).
The problem is when i do the auto run i get no update foldier to update windows xp. This download will now quit.
My question is can i just create this foldier and where does it go if i do. I do not know excatly how to fix this. So that is why im on here. Windows works fine other wise. I know i can manual install drivers but the exe file also contains the program to change the boot process and i just wanted becuase its on there. Besied that i got sound and video drivers working but i think theres drivers on there i dont need to install because i dont have that partical hardware installed and i dont want anything on there that i dont need so this is why im having this dilema. I would ask that if some one knows a work around or a solution thats great. If i have to reinstall windows then so be it but i dont have a lot of time after work (i work 12hr shifts where im at) so it causes me to want to sleep then mess with a computer. any way if you have any question ill try and answer as soon as possable. thanks for help ahead of time.thanks for the responce but to answer your question. I am trying to run the setup.exe file inside of the leopard DVD when in windows. It does do an auto run and doesnt ask what i want to open it with. It just automatically tries to install. it does not open microsoft update/installer program.
The dvd says this will try and update windows to a newer version. Then right after i push ok it comes back with no update foldier.
the program im trying to run is on the leoperd DVD and is not on the internet(i dont have internet in the room im in).
I feel for you on the lack of sleep thing. But what im trying to do is when i put the DVD in to the computer while in windows. And the program tries to run to not come back with the above error. And to install all necceray stuff off of the DVD.
So that is why i asked do i need to make the following ajustments. Becuase i dont know what drivers that i need to install i know i need most of them and i know whats on that setup.exe file at the top of the directories on the DVD is something i need to.
So that is the current dilimea. I just need to get the DVD to be able to auto run with out this error. That is essentail the bottom line.
Did that some what clear up the issue for you?
P.S.(sorry i just saw what i previosly typed. The installer comes back with the installer will now quit. Not download.) This is happening while in the EXE file that is automatically run when the leoperd DVD is inserted into the computer.
Message was edited by: caperneoignis -
Error when running a game in Windows
I installed SW Galactic Battlegrounds on my Windows partition (which I created using Boot Camp), which is running XP SP2. It played fine until a few minutes into the game, when it just randomly quit, giving the error message "Windows has encountered an error and must close." It exited the game, but the music is still playing in the background. However, no trace of it remains in Task Manager (go figure). I downloaded and installed the patch for the game, but it hasn't helped. I checked the system requirements, and it only requires 32MB of RAM (the game's a classic, what can I say). I'm not running any other programs. Basically, I have no idea why the game keeps quitting randomly, but it seems that no matter what I try, it still creates this error. Any ideas?
Well, I contacted Lucasarts about this problem, and all they could say is that "This product is not currently supported using the Apple Boot Camp Application." That doesn't make sense to me. If it's installed on a Windows partition, shouldn't it be able to run? Is there something technical going on, because Windows is running on a Mac machine, that would prevent the game from being able to run properly?
Maybe you are looking for
-
A Month ago I purchased a new Altima and I was able to connect with my iPhone to the car and take and answer calls. Since the update I can no longer use my bluetooth to answer, make or hear calls on my car. My car also uses Nissan connect. I was a
-
Imac 2008 becomes unresponsive after ios7 install
Has anyone experience slow down, unresponsiveness from apple applications specially, and crashes after the last update? throu
-
Subscription parameter available in WF
I'm doing my first custom business event and workflow and my subscription parameters are not acting as I expected. Help please from you experts out there. I have a trigger that raises my event with one parameter in the parameter list. Say PARMA. When
-
How can one edit a video clipl in iPhoto '11
Hi, i can use the edit in iphoto to save a piece of a movie clip, but suppose i want to delete the middle of a clip. I can't seem to find a simple way to doe this. Do i have to cut the beginning and the end of the movie separately, save each and th
-
I have a test1 and test2 db's on two different servers. I want to run expdp from test2 db and get the export of a table from test1. I have created a db link and used network_link in expdp command. Granted read,write on directory to user with which i