Windows Update / WSUS failing with Error Code 80070005

I have a small network (~40 systems) that I use WSUS to keep up to date.  Because of errors I was getting, I elected to rebuild my WSUS server, which is running Windows
2012R2 and WSUS is the only thing running on that server.  However, now none of my clients can receive updates from the WSUS server even though they will connect to the Microsoft Update site and download/install without a problem.  Any time I try
to install updates from the WSUS server, Windows Update says that it needs to “Install new Windows Update software”.  When I click the “Install now” button, it closes and reopens the window and then report error code 80070005, which I know is an access
denied.  The WindowsUpdate.log also reports the same error code and also indicates a reboot is required, even after I reboot the client.  I’ve run Process Monitor and am not able to see where the access denied is even coming from.  WindowsUpdate.log
file information available upon request.  Any help would be appreciated.

Because of errors I was getting, I elected to rebuild my WSUS server
I suggest we start back at this point.
What errors were you getting, and what exactly did you do to "rebuild" your WSUS server?
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Similar Messages

  • Windows Update KB2467173 fails with Error code 1603

    My windows update is failing over and over again with this message and it won't update C++ redistributable that a new program I started using requires.
    The event log says as follows:
    Product: Microsoft Visual C++ 2010  x86 Redistributable - 10.0.30319 - Update 'KB2467173' could not be installed. Error code 1603. Additional information is available in the log file C:\DOCUME~1\me\LOCALS~1\Temp\Microsoft Visual C++
    2010  x86 Redistributable Setup_20150210_173547615-MSI_vc_red.msi.txt.
    Thank you in Advance.

    I would recommend that you start with recommendations shared here: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/failure-to-install-windows-updates-error-code/934854af-0e1b-451e-889c-2fa869bab82f
    If this does not help then you will need to examine the txt log file (The path is in the error message) to get more details.
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • Windows Update KB2926765 fails with error code 8024200D.

    Note: it was recommended that I post this to TechNet. It was originally posted at http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/vista-update-bug/ed9baacd-edd3-449f-b679-8f71614f3a15?msgId=ca75efe9-beea-41e9-afda-7ffe15f9b0f3.
    Windows Update KB2926765 keeps failing to install. The error code is 8024200D.
    I've run sfc /scannow with no errors.
    I used the System File Checker tool http://support.microsoft.com/kb/929833/en-us.
    I ran the System Update Readiness tool.  http://www.microsoft.com/en-us/download/confirmation.aspx?id=1540
    The update still failed to install.
    I've also run the MGADiag tool and the Microsoft FixIt windows update (wu) tool.
    I then downloaded the update from the Microsoft Update Catalog http://catalog.update.microsoft.com/v7/site/Home.aspx
    and copied it to the Windows\CheckSUR\packages folder (after creating the "packages" folder) , and ran the Readiness tool again.
    The update failed to install.
    I ran the readiness tool again. This time the readiness tool found no errors.
    =================================
    Checking System Update Readiness.
    Binary Version 6.0.6002.23186
    Package Version 24.0
    2014-06-14 15:33
    Checking Windows Servicing Packages
    Checking Package Manifests and Catalogs
    Checking Package Watchlist
    Checking Component Watchlist
    Checking Packages
    Checking Component Store
    Summary:
    Seconds executed: 2169
     No errors detected
    Checking CoreOS key for repairing corruptions.
    Winner version: 6.0.6002.18971.
    Processor architecture: x86.
    Check key to be repaired: wcm://Microsoft-Windows-CoreOS?version=6.0.6002.18971&language=neutral&processorArchitecture=x86&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers\metadata\elements\ComputerName
    Recreated value: @_type.
    Recreated value: @dataOnly.
    Recreated value: @default.
    Recreated value: @description.
    Recreated value: @displayName.
    Recreated value: @handler.
    Recreated value: @legacyName.
    Recreated value: @legacyType.
    Recreated value: @migrate.
    Recreated value: @scope.
    Recreated value: @xsd:type.
    =======================================
    The update still fails to install.
    I also recently ran the "automatic troubleshooter" MicrosoftFixit.wu.LB.236326420485116200.3.1.Run.exe and still have the problem.
    We're using Windows Vista Business SP2 32 bit upgraded from XP. Antivirus - Bitdefender up to date. Previous antivirus - Avira Antivir and AVG. Firewall - Online Armor. The last successful update installation was Security Update for Office 2003 (KB2726929).
    It and other updates have installed successfully (after the KB2926765 failure) and KB2926765 keeps failing.
    Thanks.

    Go  through the following thread:
    Windows Update Error Code 8024200D
    You may create another user account with administrative privileges and recheck the issue.
    S.Sengupta, Windows Entertainment and Connected Home MVP

  • Windows update KB3000850 fails with error: 0x800700a1

    Windows update KB3000850 fails with the following error: 0x800700a1
    In WindowsUpdate.log there is the following:
    FATAL: CBS called Error with 0x800700a1
    In CBS.log there is the following error:
    2014-11-25 11:17:54, Error                 CSI    00000ea8 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #11395486# from Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysCreateFile(flags = 0, handle = {provider=NULL, handle=0, name= ("null")}, da = (SYNCHRONIZE|FILE_WRITE_ATTRIBUTES), oa = @0xa81c89d2f0->OBJECT_ATTRIBUTES {s:48; rd:NULL; on:[9]"MSDTC.LOG"; a:(OBJ_CASE_INSENSITIVE)}, iosb = @0xa81c89d398, as = (null), fa = (FILE_ATTRIBUTE_NORMAL), sa = (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE), cd = FILE_OPEN, co = (FILE_NON_DIRECTORY_FILE|FILE_SYNCHRONOUS_IO_NONALERT|0x00004000), eab = NULL, eal = 0, disp = Invalid)[gle=0xd000003b]2014-11-25 11:17:54, Error                 CSI    00000ea9@2014/11/25:11:17:54.259 (F) base\wcp\sil\merged\ntu\ntsystem.cpp(2155): Error STATUS_OBJECT_PATH_SYNTAX_BAD originated in function Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysCreateFile expression: (null)[gle=0x80004005]

    Tried all the suggestions in that thread, including running the DSIM tool.
    Still getting the same error: 800700a1
    I've uploaded the complete logs here: https://mega.co.nz/#F!wpZCHQRB!1GI7_PRJ3_S2nwITYVxDsg
    This is a bigger snip from CBS.log around the errors:
    2014-11-26 16:28:39, Info                  CSI    00000458 'From' Namespace [wcm://Microsoft-Windows-IPMIProvider?version=6.3.9600.16384&language=neutral&processorArchitecture=x86&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers] not found, servicing aborted, reverting to Install of 'To'
    2014-11-26 16:28:39, Info                  CSI    00000459 Processing Namespace [wcm://Microsoft-Windows-IPMIProvider?version=6.3.9600.17415&language=neutral&processorArchitecture=x86&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers]
    2014-11-26 16:28:39, Info                  CSI    0000045a done
    2014-11-26 16:28:39, Info                  CSI    00000e98 Regenerating payload files from delta files on component: [ml:280{140},l:186{93}]"amd64_microsoft-windows-com-dtc-runtime_31bf3856ad364e35_6.3.9600.16384_none_0a1162f033fa01f6"
    2014-11-26 16:28:39, Info                  CSI    00000e99 Creating NT transaction (seq 2), objectname [6]"(null)"
    2014-11-26 16:28:39, Info                  CSI    00000e9a Created NT transaction (seq 2) result 0x00000000, handle @0xf7c
    2014-11-26 16:28:39, Error                 CSI    00000e9b (F) STATUS_OBJECT_PATH_SYNTAX_BAD #8867646# from Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysCreateFile(flags = 0, handle = {provider=NULL, handle=0, name= ("null")}, da = (SYNCHRONIZE|FILE_WRITE_ATTRIBUTES), oa = @0xa2a758d410->OBJECT_ATTRIBUTES {s:48; rd:NULL; on:[9]"MSDTC.LOG"; a:(OBJ_CASE_INSENSITIVE)}, iosb = @0xa2a758d4b8, as = (null), fa = (FILE_ATTRIBUTE_NORMAL), sa = (FILE_SHARE_READ|FILE_SHARE_WRITE|FILE_SHARE_DELETE), cd = FILE_OPEN, co = (FILE_NON_DIRECTORY_FILE|FILE_SYNCHRONOUS_IO_NONALERT|0x00004000), eab = NULL, eal = 0, disp = Invalid)
    [gle=0xd000003b]
    2014-11-26 16:28:39, Error                 CSI    00000e9c@2014/11/26:16:28:39.304 (F) base\wcp\sil\merged\ntu\ntsystem.cpp(2155): Error STATUS_OBJECT_PATH_SYNTAX_BAD originated in function Windows::Rtl::SystemImplementation::DirectFileSystemProvider::SysCreateFile expression: (null)
    [gle=0x80004005]
    2014-11-26 16:28:39, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CBS.log to WER report.
    2014-11-26 16:28:39, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20141126162432.log to WER report.
    2014-11-26 16:28:39, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20141120100026.cab to WER report.
    2014-11-26 16:28:39, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20141028123021.cab to WER report.
    2014-11-26 16:28:39, Info                  CBS    Not able to add pending.xml to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2014-11-26 16:28:39, Info                  CBS    Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2014-11-26 16:28:39, Info                  CBS    Not able to add SCM.EVM to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2014-11-26 16:28:39, Error                 CSI    00000e9d (F) STATUS_OBJECT_PATH_SYNTAX_BAD #8867645# from Windows::Rtl::SystemImplementation::CSystemIsolationLayer_IRtlSystemIsolationLayerTearoff::TransferFile(flags = (ReplaceIfExists|OpenForBackupIntent), op = [8]"HardLink", odir = NULL, oname = [l:18{9}]"MSDTC.LOG", ndir = @0xa29be2af38, nname = [l:18{9}]"MSDTC.LOG", disp = (null))
    [gle=0xd000003b]
    2014-11-26 16:28:39, Error                 CSI    00000e9e (F) STATUS_OBJECT_PATH_SYNTAX_BAD #8867523# from CFileInstaller::DoComponentOperation(...)[gle=0xd000003b]
    2014-11-26 16:28:39, Error                 CSI    00000e9f (F) STATUS_OBJECT_PATH_SYNTAX_BAD #8867522# from CFileInstaller::ProcessComponentChange(...)[gle=0xd000003b]
    2014-11-26 16:28:39, Error                 CSI    00000ea0 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #8867521# from PrimitiveInstaller::CCoordinator::ProcessChange(Change 6.3.9600.16384 -> 6.3.9600.17415 for Microsoft-Windows-COM-DTC-Runtime, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral)[gle=0xd000003b]
    2014-11-26 16:28:39, Info                  CSI    0000045b SMI Primitive Installer [done]
    2014-11-26 16:28:40, Error                 CSI    00000ea1 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #4347192# from CCSDirectTransaction::PerformChangeAnalysis(...)[gle=0xd000003b]
    2014-11-26 16:28:40, Error                 CSI    00000ea2 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #4347191# from CCSDirectTransaction::PrepareForCommit(...)[gle=0xd000003b]
    2014-11-26 16:28:40, Error                 CSI    00000ea3 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #4347190# from CCSDirectTransaction::ExamineTransaction(...)[gle=0xd000003b]
    2014-11-26 16:28:40, Error                 CSI    00000ea4 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #4347189# from CCSDirectTransaction_IRtlTransaction::ExamineTransaction(...)[gle=0xd000003b]
    2014-11-26 16:28:40, Info                  CSI    0000045c SMI Primitive Installer [started]
    2014-11-26 16:28:40, Info                  CSI    0000045d 'From' Namespace [wcm://Microsoft-Windows-Installer-Engine?version=6.3.9600.17399&language=neutral&processorArchitecture=wow64&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers] not found, servicing aborted, reverting to Install of 'To'
    2014-11-26 16:28:40, Info                  CSI    0000045e Processing Namespace [wcm://Microsoft-Windows-Installer-Engine?version=6.3.9600.17415&language=neutral&processorArchitecture=wow64&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers]
    2014-11-26 16:28:40, Info                  CSI    0000045f done
    2014-11-26 16:28:40, Info                  CSI    00000460 'From' Namespace [wcm://Microsoft.Windows.WinHTTP?version=5.1.9600.16384&language=neutral&processorArchitecture=wow64&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers] not found, servicing aborted, reverting to Install of 'To'
    2014-11-26 16:28:40, Info                  CSI    00000461 Processing Namespace [wcm://Microsoft.Windows.WinHTTP?version=5.1.9600.17415&language=neutral&processorArchitecture=wow64&publicKeyToken=31bf3856ad364e35&versionScope=nonSxS&scope=allUsers]
    2014-11-26 16:28:40, Info                  CSI    00000462 done
    Is this the root cause?
    2014-11-26 16:28:39, Info                  CSI    00000e99 Creating NT transaction (seq 2), objectname [6]"(null)"
    Is there supposed to be a "null" going into whatever that is?

  • RoboHelp 10.0.1 Update installation fails with error code: U44M2P7

    After installing RoboHelp 10, I ran the 10.0.1 Update's installer.  It failed with the following error log:
    Adobe RoboHelp 10.0.1 Update
    Installation failed. Error Code: U44M2P2
    I tried re-installing RoboHelp 10, followed by a reboot of the machine.  Several attempts to run the 10.0.1 updater gave me exactly the same error.  No applications were running when the installation was attempted.
    Any help is greatly appreciated!
    Layne

    Only Adobe can tell the meaning of the error codes.
    Are you downloading the update or running it from Adobe's site.
    Try downloading from here. http://www.adobe.com/support/robohelp/downloads.html
    Otherwise this is an installation problem that is supported free. Contact Adobe.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Windows 10 Upgrade Failed with error code 80004005

    OK, I have downloaded Windows 10 Upgrade and it all goes well until the computer restarts. Once it boots up again, the upgrade does not continue and I just go back to Windows 8.1. I then see error code # 80004005 for the upgrade in the Windows Update history.  I do not know what is going on. I read on HP's Notebook upgrade page I found the following:For computers with available storage of 128 GB or less, the upgrade might require you to provide a USB hard drive (32 GB or larger). HP does not recommend using an SD card.If your computer has less than 128 GB of free hard drive space you will be prompted to connect a USB hard drive to continue with the installation. Use a blank USB hard drive 32 GB or larger. When the installation is complete, Windows 10 Upgrade will copy the windows.old file to the USB hard drive. Keep this file on the USB hard drive. It will be required to Go Back to the previous operating system if necessary.My computer definately fits in that criteria since it is equiped with a 128GB SSD. When I start the upgrade, I do not get prompted for an external hard drive.  I have also tried the Media Creation Tool and ISO/USB and get the "Windows 10 Installation has Failed" error. 

    The system reserved partition serves a purpose.  If it is deleted, then the OS will not boot back up.  In which case you are toast.ON THIS PAGE, it tells what the partition is used for.-The Boot Manager and Boot Configuration Data : When your computer boots, the Windows Boot Manager starts up and reads the boot data from the Boot Configuration Data (BCD) Store. Your computer boots the boot loader off the System Reserved partition, and it boots Windows from your system drive. I advise that you not do what CanhThanh is instructing

  • Windows 2008 backup failed with error code '2155348040'

    Hello,
    For the backup of our Windows 2008 servers, we use Windows Server backup. On one of the servers the backup will not run. In the application eventlog of the server there is the following message:
    Log Name:      Application
    Source:        Microsoft-Windows-Backup
    Date:          2/16/2010 9:00:03 PM
    Event ID:      546
    Task Category: None
    Level:         Error
    Keywords:     
    User:          <user>
    Computer:      <computer>
    Description:
    Backup attempted at '2/16/2010 8:00:03 PM' failed to start, error code '2155348040'.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-Backup" Guid="{1db28f2e-8f80-4027-8c5a-a11f7f10f62d}" />
        <EventID>546</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime="2010-02-16T20:00:03.559Z" />
        <EventRecordID>33498</EventRecordID>
        <Correlation />
        <Execution ProcessID="4744" ThreadID="3516" />
        <Channel>Application</Channel>
        <Computer>...</Computer>
        <Security UserID="S-1-5-21-3054417077-3708097399-2792259940-500" />
      </System>
      <EventData>
        <Data Name="BackupTime">2010-02-16T20:00:03.559Z</Data>
        <Data Name="ErrorCode">2155348040</Data>
        <Data Name="ErrorMessage">%%2155348040</Data>
      </EventData>
    </Event>
    Does anyone know how to solve this problem?
    Best regards.
    Wilfred van der Heijden

    Hello Wilfred,
      thank you for bringing your concerns to us. 
      The error code  2155348040 indicates BLB_E_BACKUP_TARGET_SPACE_NOT_ENOUGH which happens if the target volume size is not
      sufficient to create a backup. In your case the total used space of source volume(s) could be greater than the space on the target volume.
      So please check the free and used space on the source volumes and retry the backup with the target volume space greater than that total
      space. We recommend the target volume size to be 1.5 times of the total size of all the source volumes for scheduled backups so that you
      can have sufficient number of backup versions stored.
      If you are using Block Level Backup then one other possiblity could be that your source volume is fragmented causing the backup size to be
      more than expected. If that is the case then retry the backup after defragmenting the source volume.
    Thanks,
    Bikash Agrawala [MSFT]
    --------------------------------------------------------------------------------- This posting is provided "AS IS" with no warranties, and confers no rights

  • Update KB3033929 fails with error code 80004005

    Security Update for Windows 7 for x64-based Systems (KB3033929)
    Installation date: ‎3/‎11/‎2015 8:57 AM
    Installation status: Failed
    Error details: Code 80004005
    Update type: Important
    A security update. . .
    I can't find any info on this error.  Tried the update twice and both times it failed.

    OK, I ran it again.. and I think this is the relevant part of the +200M log.  It does seem to have something to do with the boot manager or knowing which drive is the 'globalroot', perhaps.
    2015-03-13 08:33:13, Info CSI 0000003d Begin executing advanced installer phase 38 (0x00000026) index 16 (0x0000000000000010) (sequence 55)
    Old component: [ml:360{180},l:358{179}]"Microsoft-Windows-BootEnvironment-Core-MemoryDiagnostic, Culture=neutral, Version=6.1.7601.18741, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=amd64, versionScope=NonSxS"
    New component: [ml:360{180},l:358{179}]"Microsoft-Windows-BootEnvironment-Core-MemoryDiagnostic, Culture=neutral, Version=6.1.7601.17514, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=amd64, versionScope=NonSxS"
    Install mode: install
    Installer ID: {81a34a10-4256-436a-89d6-794b97ca407c}
    Installer name: [15]"Generic Command"
    2015-03-13 08:33:13, Info CSI 0000003e Performing 1 operations; 1 are not lock/unlock and follow:
    LockComponentPath (10): flags: 0 comp: {l:16 b:9c8942df895dd0011800000074043c05} pathid: {l:16 b:9c8942df895dd0011900000074043c05} path: [l:238{119}]"\SystemRoot\WinSxS\amd64_microsoft-windows-b..re-memorydiagnostic_31bf3856ad364e35_6.1.7601.18741_none_3637d03b1b5800bc" pid: 474 starttime: 130707235496916126 (0x01d05d89c55df49e)
    2015-03-13 08:33:13, Info CSI 0000003f Performing 1 operations; 1 are not lock/unlock and follow:
    LockComponentPath (10): flags: 0 comp: {l:16 b:9c8942df895dd0011a00000074043c05} pathid: {l:16 b:9c8942df895dd0011b00000074043c05} path: [l:238{119}]"\SystemRoot\WinSxS\amd64_microsoft-windows-b..re-memorydiagnostic_31bf3856ad364e35_6.1.7601.17514_none_365b53d91b3ce4ff" pid: 474 starttime: 130707235496916126 (0x01d05d89c55df49e)
    2015-03-13 08:33:13, Info CSI 00000040 Calling generic command executable (sequence 3): [20]"C:\Windows\bfsvc.exe"
    CmdLine: [47]""C:\Windows\bfsvc.exe" C:\Windows\boot /nofonts"
    2015-03-13 08:33:45, Error [0x018009] CSI 00000041 (F) Done with generic command 3; CreateProcess returned 0, CPAW returned S_OK
    Process exit code 112 (0x00000070) resulted in success? FALSE
    Process output: [l:8995 [4096]"BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 1 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 2 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 3 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 4 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 5 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 6 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 7 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 8 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 9 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 10 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 11 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 12 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\Harddis[gle=0x80004005]
    2015-03-13 08:33:45, Error [0x018009] CSI kVolume1\Boot\bootmgr) failed! (Attempt 13 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 14 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 15 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 16 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 17 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 18 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 19 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 20 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 21 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 22 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 23 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 24 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 25 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 26 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\[gle=0x80004005]
    2015-03-13 08:33:45, Error [0x018009] CSI bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 27 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed!"[4096]" (Attempt 28 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 29 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 30 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 31 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 32 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 33 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 34 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 35 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 36 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 37 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 38 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 39 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 40 of 60) Last Error = 0x[gle=0x80004005]
    2015-03-13 08:33:45, Error [0x018009] CSI 70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 41 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 42 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 43 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 44 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 45 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 46 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 47 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 48 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 49 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 50 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 51 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 52 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 53 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) fail[gle=0x80004005]
    2015-03-13 08:33:45, Error [0x018009] CSI ed! (Attempt 54 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 55 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALR"[803]"OOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 56 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 57 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 58 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 59 of 60) Last Error = 0x70
    BFSVC: BfspCopyFile(C:\Windows\boot\PCAT\bootmgr, \\?\GLOBALROOT\Device\HarddiskVolume1\Boot\bootmgr) failed! (Attempt 60 of 60) Last Error = 0x70
    BFSVC: Error copying boot files from C:\Windows\boot\PCAT to \\?\GLOBALROOT\Device\HarddiskVolume1\Boot! Last Error = 0x70
    "][gle=0x80004005]
    2015-03-13 08:33:45, Info CSI 00000042 Calling generic command executable (sequence 4): [24]"C:\Windows\fveupdate.exe"
    CmdLine: [35]""C:\Windows\fveupdate.exe" /memtest"
    2015-03-13 08:33:45, Info CSI 00000043 Done with generic command 4; CreateProcess returned 0, CPAW returned S_OK
    Process exit code 0 resulted in success? TRUE
    Process output: [l:248 [248]"BitLockerUpdate: Running.
    BitLockerUpdate: Service request is for memtest.exe.
    BitLockerUpdate: BitLocker Drive Encryption is not turned ON on the OS volume.
    BitLockerUpdate: No servicing was performed on the OS volume.
    BitLockerUpdate: Done.
    Edit: One thing I've noticed on that PC, the 'system reserved' partition is only 25M, versus the usual 100M.  I might try to boot using the recovery console and see what happens.

  • Windows 7 backup fails with Error Code 0x80070002

    I am trying to back up my computer to 32 GB USB flashdrive and I get the error 0x80070002; the system cannot find the file specified.
    I've checked the event logs and I see the error: Event 14, volsnap "The shadow copies of volume C: were aborted because of an IO failure on volume C:."
    I'm running Windows 7 Home Premium, Service Pack 1, 64x.

    As it is a Windows 7 related question, it is recommended to post on Windows 7 forum instead of Windows Server forum:
    http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro
    In the meantime a check disk is worth to have a try. Also try to run the backup in off-time to free the system resource. 
    If you have any feedback on our support, please send to [email protected]

  • CcmSetup failed with error code 0x80004005 - windows 8.1

    using sccm 2012 r2, trying to push to a windows 8.1 client i get:
    <![LOG[==========[ ccmsetup started in process 7416 ]==========]LOG]!><time="16:05:28.041+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:9437">
    <![LOG[Running on platform X64]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="util.cpp:1837">
    <![LOG[Updated security on object C:\WINDOWS\ccmsetup\cache\.]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9272" file="ccmsetup.cpp:9281">
    <![LOG[Launch from folder C:\WINDOWS\ccmsetup\]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:721">
    <![LOG[CcmSetup version: 5.0.7958.1000]LOG]!><time="16:05:28.042+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:727">
    <![LOG[In ServiceMain]LOG]!><time="16:05:28.044+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="ccmsetup.cpp:3365">
    <![LOG[Running on 'Microsoft Windows 8.1 Pro' (6.3.9600). Service Pack (0.0). SuiteMask = 272. Product Type = 18]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context="" type="1"
    thread="9468" file="util.cpp:1919">
    <![LOG[Ccmsetup command line: "C:\WINDOWS\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context="" type="1"
    thread="9468" file="ccmsetup.cpp:3590">
    <![LOG[Command line parameters for ccmsetup have been specified.  No registry lookup for command line parameters is required.]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context=""
    type="1" thread="9468" file="ccmsetup.cpp:3775">
    <![LOG[Command line: "C:\WINDOWS\ccmsetup\ccmsetup.exe" /runservice /config:MobileClient.tcf]LOG]!><time="16:05:28.084+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468"
    file="ccmsetup.cpp:3776">
    <![LOG[SslState value: 224]LOG]!><time="16:05:28.085+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="ccmsetup.cpp:4425">
    <![LOG[CCMHTTPPORT:    80]LOG]!><time="16:05:28.086+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8617">
    <![LOG[CCMHTTPSPORT:    443]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8632">
    <![LOG[CCMHTTPSSTATE:    224]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8650">
    <![LOG[CCMHTTPSCERTNAME:    ]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8668">
    <![LOG[FSP:    ]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8720">
    <![LOG[CCMFIRSTCERT:    1]LOG]!><time="16:05:28.087+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:8778">
    <![LOG[Config file:      C:\WINDOWS\ccmsetup\MobileClientUnicode.tcf]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468"
    file="ccmsetup.cpp:4539">
    <![LOG[Retry time:       10 minute(s)]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4540">
    <![LOG[MSI log file:     C:\WINDOWS\ccmsetup\Logs\client.msi.log]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468"
    file="ccmsetup.cpp:4541">
    <![LOG[MSI properties:    INSTALL="ALL" SMSSITECODE="consto" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="224" CCMFIRSTCERT="1"]LOG]!><time="16:05:28.088+00"
    date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4542">
    <![LOG[Source List:]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4550">
    <![LOG[                  \\TA-SRV-SC.constoplc.local\SMSClient]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup"
    context="" type="1" thread="9468" file="ccmsetup.cpp:4557">
    <![LOG[                  \\TA-SRV-SC.constoPLC.LOCAL\SMSClient]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup"
    context="" type="1" thread="9468" file="ccmsetup.cpp:4566">
    <![LOG[MPs:]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:4569">
    <![LOG[                  TA-SRV-SC.constoplc.local]LOG]!><time="16:05:28.088+00" date="01-15-2014" component="ccmsetup" context=""
    type="1" thread="9468" file="ccmsetup.cpp:4584">
    <![LOG[MapNLMCostDataToCCMCost() returning Cost 0x1]LOG]!><time="16:05:28.091+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmutillib.cpp:5479">
    <![LOG[No version of the client is currently detected.]LOG]!><time="16:05:28.093+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:2748">
    <![LOG[Folder 'Microsoft\Configuration Manager' not found. Task does not exist.]LOG]!><time="16:05:28.094+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="wintask.cpp:622">
    <![LOG[Updated security on object C:\WINDOWS\ccmsetup\.]LOG]!><time="16:05:28.095+00" date="01-15-2014" component="ccmsetup" context="" type="0" thread="9468" file="ccmsetup.cpp:9281">
    <![LOG[A Fallback Status Point has not been specified.  Message with STATEID='100' will not be sent.]LOG]!><time="16:05:28.095+00" date="01-15-2014" component="ccmsetup" context="" type="1"
    thread="9468" file="ccmsetup.cpp:9763">
    <![LOG[Running as user "SYSTEM"]LOG]!><time="16:05:28.118+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9468" file="ccmsetup.cpp:1995">
    <![LOG[A Fallback Status Point has not been specified.  Message with STATEID='328' will not be sent.]LOG]!><time="16:05:28.118+00" date="01-15-2014" component="ccmsetup" context="" type="1"
    thread="9468" file="ccmsetup.cpp:9763">
    <![LOG[CcmSetup failed with error code 0x80004005]LOG]!><time="16:05:28.119+00" date="01-15-2014" component="ccmsetup" context="" type="1" thread="9272" file="ccmsetup.cpp:10879">
    any ideas why its failing?

    Hi,
    I've seen the same error on a customer where we had Windows Intune Client (SCCM) installed previously. Did you try it on a newly deployed computer? If you had Intune or another CCM client on it previously make sure you clean it up. Here is a well formulated
    instruction:
    http://douwevanderuit.wordpress.com/2014/01/30/removing-windows-intune-client/
    Usually when deploying to many clients we use a startup script, there is a great one that Jason Sandys made in the link below.
    http://blog.configmgrftw.com/configmgr-client-startup-script/
    There should be no problems deploying SCCM 2012 R2 clients on Windows 8.1 unless there is something wrong with either the setup or the client computer.
    All the best, Jesper Hassing - MCTS SCCM 2012 - MCSA 2012 Server - MCP

  • Windows Server 2008 R2 Service Pack 1 installation failed with error code 0x800f0a12

    Hello,
    I'm facing problem to install windows server 2008 R2 SP1. I cannot install SP1. In this server have running Exchange 2010 server. to update Win2008 R2 SP1 facing the following error:
    1. Service Pack installation failed with error code 0x800f0a12.
    2. Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Server 2008 R2 Service Pack 1 for x64-based Systems (KB976932).
    Please suggest

    Please run the system update readiness tool.
    http://windows.microsoft.com/en-us/windows7/What-is-the-System-Update-Readiness-Tool?SignedIn=1
    Then post the complete contents of;
    %SYSTEMROOT%\Logs\CBS\CheckSUR.log
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • CC app manager update  failed with error code 50 after reaching about 35%

    Trying to update the CC app manager. The update is always very slow  (I have ATT DSL, lowest level) and I usually terminate it after an hour or so. Today I let it run and it failed with error code 50 after reaching about 35%. Any ideas?

    Update to my original post. I read through some of the suggestions that I found in other threads for fixing this problem, and it appears that this has been an ongoing issue. Numerous fixes have been suggested, some very convoluted, difficult, and involved, including those that came from the customer support folks.  I passed on those as this should be something simple. How Adobe manages to let updating of their own software turn into an ongoing problem is beyond me and sort of defeats the purpose of subscribing. I then noticed that a simple fix had been suggested a few times, so I tried that.
    The user suggested fix that worked for me was:
    1) Restarted computer (Asus Windows 7 i3 machine for me) in Safe Mode with Networking. Logged into my separate Admin account just in case.
    2) Started the creative cloud desktop app.
    3) The app said it needed to be updated. I hit the update button.
    4) Update started and proceeded slowly as it had in many previous failed attempts (I have ATT DSL at the slowest level, but it is not dial-up). Within about 30 min, the update succeeded.
    5) Restarted computer in normal mode.
    6) The creative cloud desktop app now did not say it needs to be updated, and I can update my other apps normally. Have not updated LR or PS yet, but plan to try. If that fails, I may try doing it in the Safe Mode with Networking.
    So, that was relatively painless and much much simpler than many of the other suggestions I saw. Do not know if it will work for everyone, but I wanted to post the fix that worked for me. Thank you very much to the 2 or 3 users who had suggested this fix earlier (sorry, I did not write down your IDs, but the threads can be found by searching for creative cloud desktop update fail error code 50). Hope this saves some people a lot of time.

  • Installation of Photoshop update 13.1.2 for creative cloud fails with error code U44M1P7 I need help

    I need help installing update 13.1.2 for Photoshop creative cloud, installation fails with error code: U44M1P7. Could someone please help?

    Sorry to bother you.
    I could find the answer after searching previous posts about this language problem.
    Had to change my language in AAM profile and then download PS CS6 again ( english version ).
    Then open the actual Photoshop and in preferences > interface you can besides the Dutch also option for English.
    restart application and Voila.
    Greetz, Jeroen

  • EvtFormatMessage function fails with error code 15033 (ERROR_EVT_MESSAGE_LOCALE_NOT_FOUND) on non-English Windows OS

    I have an App which subscribes to Windows events and if it is matching the filter criteria, it reports it.
    I have observed a strange problem on non-English windows 2008 OS. 
    If the Windows event is of source = EventLog (e.g. Event ID 1102: Security log was cleared), then EvtFormatMessage fails with error code 15033. But if the event is of any other source (e.g. Microsoft Security Auditing), then it works absolutely fine.
    While calling EvtOpenPublisherMetadata, I have created locale ID as MAKELCID(MAKELANGID(0x09,0x01) i.e. Primary language = LANG_ENGLISH and Sub Language = SUBLANG_DEFAULT.
    I want events details in English only and hence primary language is put as English. If I change this macro to have primary language as LANG_CHINESE and sub language as SUBLANG_CHINESE_SIMPLIFIED, then it works fine but gives back event details in native
    OS language (Chinese in this case). That's not a desirable output for me.
    Following is the way I'm calling EvtFormatMessage 
    EvtFormatMessage(hMetaData, hEvent[0], -1, 0, NULL,
                                   1 /* EvtFormatMessageEvent */, 
                                   m_pTextBufferSize/sizeof(WCHAR),
                                   m_pTextBuffer, &dwBuffUsed);
    A work-around for this is to install a MUI pack for English language. If the MUI pack is installed then it works fine. But I cannot enforce users to have this pack installed on all their systems.
    My question is  why this API is working for some set of Events whereas failing for some specific Events? Am I doing something wrong?
    Any help would be appreciated.
    TIA,
    Regards,
    Yogesh
     

    Was on vacation and hence the delay in replying.
    As mentioned earlier, while calling EvtOpenPublisherMetadata, I have created locale ID as MAKELCID(MAKELANGID(0x09,0x01)
    i.e. Primary language = LANG_ENGLISH and Sub Language = SUBLANG_DEFAULT.  If I change this macro
    to have primary language as LANG_CHINESE and sub language as SUBLANG_CHINESE_SIMPLIFIED, then it works fine but gives back event details in native OS language (Chinese in this case).
    This is not an option for me as I want event details in English language only.
    Regards,
    Yogesh
    Regards, Yogesh

  • Photoshop Elemnts 12 for mac updates fail to install with Adobe Photoshop Elements 12.1 Update Installation failed. Error Code: U44M1P7

    I get the following error message with Adobe Photoshop Elements 12.1 Update Installation failed. Error Code: U44M1P7
    Anyone any ideas please ?

    Topgazza please see Installation failed. Error U44M1P7 | Updates - http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html for information on how to resolve the U44M1P7 error.

Maybe you are looking for

  • SAP DMS server installation Query

    Guys, I would like to share my plans on DMS server installation under DEV,Quality,prod stage and requesting you all to validate and send me any comments if I am wrong anywhere. -        We have 1 external DMS server of (250Gb capacity) -     We are n

  • Looking for app to either print or save text messages in windows

    I saw a couple of posts for this feature but it was for mac. does anyone know if printing or saving text messages is possible? thanks

  • Mail boxes not being emptied

    I get daily emails that I need to delete some emails due to full mail boxes.  I have emptied all my mail boxes but still get the notices.  What is the clue to get this corrected?

  • Keyboard without English - do they make em? Deutsch + Russian wanted

    Hi, Does Apple produce USB keyboards, multilingual, but without English? My uncle needs a German+Russian one. Is laser engraving of a pure-Deutsch one the only solution? Do they make Deutsche keyboard without dupe letters on the keys?

  • Error won't let me install iTunes - please help !

    When I have tried to download the latest version of iTunes so that I can update my iPhone the software won't install correctly. I even un-installed iTunes and tried from scratch. I get so far then get the error message "Could not write value to key \