Windows Virtual PC and XP Mode refuses to start after update 25 February 2014

I have been using Virtual PC and XP Mode now successfully for more than 1 year. I am running Windows 7 Profession on a i7-2600 with 8 GB
But after the update on 25 February 2014 to both the XP Mode and Windows 7, my Virtual PC no longer works. It loops continuously and never starts.
Is anyone else having this problem? Are there any hot fixes? We have our accounting and address management system running in XP mode, so this is quite important to find a fast solution.
Thanks very much
David

Hi,
Rename the .vsv (virtual machine saved states) file in "C:\Users\[user id]\AppData\Local\Microsoft\Windows
Virtual PC\Virtual Machines",then start the VM again.
As a test, you can also uninstall the newly installed updates, check whether this issue is related with the updates. Generally, Windows Updates will not cause any issues, but if some software installed in your system conflicts with it or the updates
not installed correctly, it will cause some unexpected issues.
Regards
Yolanda Zhu
TechNet Community Support

Similar Messages

Windows Virtual PC And XP Mode After Support Stops

I paid extra to get a version of Windows 7 that ran a virtual PC. I require this for my work.
What solution is available for me after Microsoft stops support for XP?

Because Microsoft are discontinuing support for XP, they are effectively ending support for Win 7 Professional.
I feel as though Microsoft need to release a replacement for Win 7 Professional users that addresses this, and delivers a secure safe shell to replace XP mode. Either that, or refund Win 7 Professional users their purchase price.
You quoted a Q&A. Can I ask when this Q&A was produced? I cannot recall reading it when I purchased Win 7 Professional, and because it says "Windows
XP extended support phase ends in 2014" I strongly suspect it is only a recent statement to cover the obvious paradox Microsoft have created for themselves by ending XP support while it still remains an inherent component of the Windows 7 Professional
product - a product that is supposed to be supported.
Thanks for the answer Prof. Appreciate it.

Windows Update Stalls When Running in Windows 7/Windows Virtual PC/Win XP_ Mode

Hi
This is Bob in Tallahassee. Can anyone please help. I installed Win7 Pro on a newly built PC and then Windows Virtual PC/Win XP Mode. When I try running Windows Update in the XP mode window, it keeps cycling "searching for updates"
and never reaches the next step, never stops cycling. I checked msconfig and there is a process "svchost.exe" eating 99% of resources. It is likely related to windows update. When I shut it down, my internet connection is cut
off, but the Windows Update still keeps cycling. I have tried all I know, including optimizing bios for virtualization. Is there another setting that I'm missing? Thanks. Bob

Hi,
I find some error information in your log:
Windows Update error 80070643
http://windows.microsoft.com/en-in/windows/windows-update-error-80070643#1TC=windows-7
You can refer to this link to troubleshoot your issue:
.NET Framework update installation error: "0x80070643" or "0x643"
http://support.microsoft.com/kb/kb976982/en-us
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support

Cisco Jabber for Windows in Extend and Connect mode and making outbound calls

Hi guys,
I've set up Cisco Jabber for Windows to use Extend and Connect to control a remote PBX endpoint. I've configured the required CTI-RD device, remote destinations, associated the users to the line and added the devices to end-user controlled device. The extend and connect part is working flawlessly without any issues. I'm able to receive inbound calls on the remote PBX endpoint and control the call (hold, resume, transfer etc.) using the Jabber call window that pops up.
However, I'm unable to make any outbound calls via the Jabber client when in extend and Connect mode. Reading the Extend and Connect guide, I need to configure Dial Via Office (DVO) Reverse. So when the user initiates a Dial-Via-Office reverse call, CUCM calls and connect to the Extend and Connect device (CTI-RD). CUCM then calls and connects to the number the user dialled and finally connects the two call legs.
After attempting to configure DVO-R for Jabber for Windows in Extend and Connect mode following the CUCM feature services guide, i'm unable to get any outbound calls working. From RTMT, i am receiving the following Termination Cause Code: (27) Destination out of order. What i also notice is that there is no calling number for that trace either. I would've thought that the calling party would've been the Enterprise Feature Access (EFA) number.
Has anyone got this working or can provide some guidance?
Thanks.

Hi guys,
I've set up Cisco Jabber for Windows to use Extend and Connect to control a remote PBX endpoint. I've configured the required CTI-RD device, remote destinations, associated the users to the line and added the devices to end-user controlled device. The extend and connect part is working flawlessly without any issues. I'm able to receive inbound calls on the remote PBX endpoint and control the call (hold, resume, transfer etc.) using the Jabber call window that pops up.
However, I'm unable to make any outbound calls via the Jabber client when in extend and Connect mode. Reading the Extend and Connect guide, I need to configure Dial Via Office (DVO) Reverse. So when the user initiates a Dial-Via-Office reverse call, CUCM calls and connect to the Extend and Connect device (CTI-RD). CUCM then calls and connects to the number the user dialled and finally connects the two call legs.
After attempting to configure DVO-R for Jabber for Windows in Extend and Connect mode following the CUCM feature services guide, i'm unable to get any outbound calls working. From RTMT, i am receiving the following Termination Cause Code: (27) Destination out of order. What i also notice is that there is no calling number for that trace either. I would've thought that the calling party would've been the Enterprise Feature Access (EFA) number.
Has anyone got this working or can provide some guidance?
Thanks.

Windows Virtual PC and XP installation fails, with eror code: 80070002

Windows Virtual PC and XP installation of: RefreshPkg.msu, fails, with eror code: 80070002
I have tried to look around for at fix but with no luck so far, PLEASE HELP !
Incl. CBS log with error:
2014-02-21 16:30:10, Info                  CBS    Clearing HangDetect value
2014-02-21 16:30:10, Info                  CBS    Saved last global progress. Current: 1, Limit: 1, ExecuteState: CbsExecuteStateFailed
2014-02-21 16:30:10, Info                  CBS    Doqe: Unlocking driver updates, Count 3
2014-02-21 16:30:10, Info                  CBS    WER: Generating failure report for package: Microsoft-Windows-VirtualPC-Package-TopLevel-MergedCab~31bf3856ad364e35~amd64~~7.1.7600.16393,
status: 0x80070002, failure source: AI, start state: Staged, target state: Installed, client id: WindowsUpdateAgent
2014-02-21 16:30:10, Info                  CBS    Failed to query DisableWerReporting flag. Assuming not set... [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-02-21 16:30:10, Info                  CBS    Failed to add %windir%\winsxs\pending.xml to WER report because it is missing. Continuing without it...
2014-02-21 16:30:10, Info                  CBS    Failed to add %windir%\winsxs\pending.xml.bad to WER report because it is missing. Continuing without
it...
2014-02-21 16:30:11, Info                  CBS    SQM: Reporting package change completion for package: Microsoft-Windows-VirtualPC-Package-TopLevel-MergedCab~31bf3856ad364e35~amd64~~7.1.7600.16393,
current: Staged, original: Staged, target: Installed, status: 0x80070002, failure source:
AI, failure details: "Firewall Rule 80070002 40 Install (first install) Microsoft-Windows-VirtualPC-Application, Culture=neutral, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=amd64, versionScope=NonSxS ",
client id: WindowsUpdateAgent, initiated offline: False, execution sequence: 917, first merged sequence: 917
2014-02-21 16:30:11, Info                  CBS    SQM: Upload requested for report: PackageChangeEnd_Microsoft-Windows-VirtualPC-Package-TopLevel-MergedCab~31bf3856ad364e35~amd64~~7.1.7600.16393,
session id: 142862, sample type: Standard
2014-02-21 16:30:11, Info                  CBS    SQM: Ignoring upload request because the sample type is not enabled: Standard
2014-02-21 16:30:11, Info                  CBS    Startup: Package: Microsoft-Windows-VirtualPC-Package-TopLevel-MergedCab~31bf3856ad364e35~amd64~~7.1.7600.16393
completed startup processing, new state: Staged, original: Staged, targeted: Installed. hr = 0x80070002
2014-02-21 16:30:11, Info                  CBS    Startup: Package: Microsoft-Windows-VirtualPC-Package-MiniLP~31bf3856ad364e35~amd64~ar-SA~7.1.7600.16393 completed
startup processing, new state: Staged, original: Staged, targeted: Installed. hr = 0x800f0826
2014-02-21 16:30:11, Info                  CBS    Startup: Package: Microsoft-Windows-VirtualPC-Package-MiniLP~31bf3856ad364e35~amd64~cs-CZ~7.1.760

See ZDnet article Microsoft releases fix for Windows Update corruption errors found @
http://www.zdnet.com/microsoft-releases-fix-for-windows-update-corruption-errors-7000026582/
The Microsoft KB article is found @
http://support.microsoft.com/kb/947821
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

I had reset my iPhone and my Dictaphone refuse to start. I sea a microphone picture but when I push the 3 horizontal bars or the red buttom, they return to the main menu...

I had reset my iPhone and my Dictaphone refuse to start. I sea a microphone picture but when I push the 3 horizontal bars or the red buttom, they return to the main menu...

rstevenson wrote:
If i factory reset my iPhone will it relock to O2?
I've had my iPhone 3G for a couple of years and when out of contract i asked O2 to unlock it, which they did. I've used a Three sim card and it works okay. I've now decided to sell it but before I send it to the buyer i want to factory reset the phone. Will it remain available to use on any network once i've reset it, because i've advertised it as an unlocked phone?
If it was officially unlocked by O2 it will remain unlocked if reset or updated.
Also, just as a side note if you can help. Its running iOS 3.1.3. Once factory reset and connected to iTunes will it force an iOS 4 update or can you choose not to update the OS?
If you restore it in iTunes it will be updated to the current release, 4.3.1. There are ways around this; Google is your friend.

Hi, when ever I'm using 3G, on my Iphone4 sim stops working and Network is lost, this started after I updated my phone with 6.0.1(10A523)version. Please help how to solve this problem.

Hi, when ever I'm using 3G, on my Iphone4 sim stops working and network is lost, this started after I updated my phone with 6.0.1(10A523)version. Please help how to solve this problem. Thanks.

Photos/videos in the Camera Roll are not synced. Photos/videos in the Camera Roll are not touched with the iTunes sync process. Photos/videos in the Camera Roll can be imported by your computer which is not handled by iTunes. Most importing software includes an option to delete the photos/videos from the Camera Roll after the import process is complete. If is my understanding that some Windows import software supports importing photos from the Camera Roll, but not videos. Regardless, the import software should not delete the photos/videos from the Camera Roll unless you set the app to do so.
Photos/videos in the Camera Roll are included with your iPhone's backup. If you synced your iPhone with iTunes before the videos on the Camera Roll went missing and you haven't synced your iPhone with iTunes since they went missing, you can try restoring the iPhone with iTunes from the iPhone's backup. Don't sync the iPhone with iTunes again and decline the prompt to update the iPhone's backup after selecting Restore.

Only half of the body just below the camera and steel side of camera side is getting heated up just after 10 , 15 mins of usage i my iphone 4 is it normal...as earlier the body was not heating up even after 2 hours....the problem started after updating t

only half of the body just below the camera and steel side of camera side is getting heated up just after 10 , 15 mins of usage i my iphone 4 is it normal...as earlier the body was not heating up even after 2 hours....the problem started after updating to 6.1.2
iPhone 4, iOS 6.1.2

Hi, did you ever solve this problem?
My 1 year old -- ha! one month out of warranty -- iPhone 4 has been having a nearly identical problem over the past few days.
It started by dying completely so I had the battery replaced, thinking it was simply battery issue.
It then worked again for a moment but started doing exactly what you describe, going through a reset cycle (longer than 30 seconds but who's counting). And it felt quite warm.
Did hard reset, plugged into wall charger and MBP USB but the new battery wouldn't even get a full charge (a whopping 92% after nearly two days). It would even lose battery when plugged in if I opened an app. And all the while plugged in, if I left the phone on, it would cycle through these resets. So I turned it off to try to charge it.
Now suddenly, it's dead again. Totally black, and hard reset does nothing. Up until two days ago there was nothing wrong whatsoever with this phone! And I hadn't even installed a new app that could be the root of the issue. No idea whatsoever what caused this.
Any help would be much appreciated!!

Firstly I updated my ipad into ios7 and after watching the video by Apple, iWork, pages and numbers are free for download after updating iOS 7. How can I download iWork pages and number for free?

Firstly I updated my ipad into ios7 and after watching the video by Apple, iWork, pages and numbers are free for download after updating iOS 7. How can I download iWork pages and number for free? Please help me.

stevejobsfan is correct; iwork for ios is free only for new purchases of new ios devices. A good work around (if you have wifi connectivity) is going to the icloud website on your ipad, and working on your document.
A word of caution (the real reason I am responding to your post). If you do a lot of 'formatting' of a document on iwork for mac, and then save it in icloud; you will probably loose most of the formatting you have done (this will be true if you oppen the document in iwork for ios; also) It happened to me, and I did not duplicate the document before saving it to icloud; I lost at least an hours worth of work.

Can't open numbers on my iPhone 5S and iPad mini (1st Gen.) after updating to the new version 2.0.1. Please help!

Can't open numbers on my iPhone 5S and iPad mini (1st Gen.) after updating to the new version 2.0.1. Please help!

Okay , you should only delete EMPTY DUPLICATED folders, not preview folders or any others. I would put them all back. Then just delete any DUPLICATED EMPTY folders, do not disturb any other folders. On iOS switch off DOCUMENTS AND DATA under ICLOUD in SETTINGS. Do this on all iOS devices not just the one. Once deleted DUPLICATE FOLDERS on the mac in MOBILE FOLDERS then exit the LIBRARY. Open PAGES on your MAC and view folders on icloud. Check everything is all there as expected. If okay then DELETE and re-install PAGES app on iOS - THEN switch on DATA and DOCUMENTS in ICLOUD. Now open PAGES. If you have Time Machine on you can recover any 'lost' doc files and restore them from your mac from pages application. Try the process again and do not disturb any folders other than ones I mentioned as this is the system files LIBRARY. It is not a place to be over zealous in moving, altering and deleting folders and files. Take care please.

Some apps on my macbook pro will not open,,,they bouce a few times and disappear. would someone please give me a straightforward answer on why this might be haappening(started after updates)) please?

some apps on my macbook pro will not open,,,they bouce a few times and disappear. would someone please give me a straightforward answer on why this might be haappening(started after updates)) please?

Yay! Solved my own question; just did a hard shutdown, worked like a charm! Funny, didn't before. But who am I to question salvation?

Installing the New Virtual Machine and XP Mode in Win7x64 on the Intel 2x E5-2620 Architecture (12 cores, 24 cpus)

I have been hibernating quietly at school with an Intel Core Duo T7300 on XP, and have been insulated from the madness of multi-core processors. I gather that there were problems with installing the XP Virtual Machine on Vista under Quad architectures,
but that these eventually got resolved in 2009.
The newer problem is concerned with installing the XP Virtual Machine on Win7x64 with greater than four cores in the cpu architecture. Others have mentioned this problem over this past Summer 2012. The problem is that at the very last step of
the complete install, Win7x64 reports a failure to install the XP Virtual Machine, and with no further comment.
Apparently KB/2519949 gave a temporary (MSFT qualifies this as "temporary") hotfix solution to this problem for AMD 8-core chips in the Bulldozer series. However MSFT cautions that this problem requires further research. This was earlier
this Summer 2012.
My problem is that I have an Intel 2xE5-2620 duo-processor cpu architecture (2x6=12 cores, 24 cpus in Windows). The cpu architecture is both Intel, and with far more than the old standard of four cores. The XP Virtual Machine in Win7x64 will
not install, as described above.
I have an armload of new 64-bit software all of which has installed pristinely in Win7x64 under this 2xE5-2620 Intel architecture. However, I have one very important piece of legacy (latest version incompatible beyond XP type of legacy) technical writing
software that is critical to my PhD thesis. In need the XP Virtual Machine for this, and I have no idea how to get it. My PhD thesis supervisor also needs this particular piece of "legacy" technical writing software for his new book on Probability
Theory.
1011::1000

I have news about this issue with XP Mode on Workstation machines. I have actually known about this for a couple of months, but it has not been until these Christmas 2012 holidays that I have had a chance to follow up with an implementation.
In review, I purchased a Workstation computer for scientific computation purposes this past August 2012. My chipset is an Intel 2x E5-2620 for a total of 12 cores, and it turns out that this was not the problem for XP Mode. My OEM shipped this
machine with Windows 7, but without XP Mode, and there is a reason why.
As an aside, it should be mentioned that the main line MSFT OS, Windows 7 or 8, is what I want for this machine, and not Server 2012. The reason is that most of the scientific computation and technical writing software that I use is written only for
Windows, and not for Server. Then also hopefully Hyper-V can do in Windows 8 most of what XP Mode is doing for me in Windows 7.
My dealer was able to tell me, when he got back from holidays in late September, that the reason that XP Mode failed to install on this Workstation, and the reason it was not included by the OEM, was that the original HDD configuration was for RAID (3 available
bays) and formatted for drives of at least 1TB in size. Although the original HDD installation was only a single HDD with only 500GB, the machine was equipped to have something much larger installed. But this format excluded the possibility of
XP Mode.
So we changed the hard drive installation to something that I preferred. We installed Windows 7 on a 480GB SSD, and I installed all my software on this drive, as well as all my important data. Most importantly, since this drive is less than 1TB,
we could use the MBR format which allows XP mode. Then we also formatted the original HDD of 500GB in MBR, and decided to run it with Intel RST. This second drive is for unimportant data, and large files. For backup we chose a 2TB USB 3.0
external. In this setting, installing Windows XP Mode was easy, as the only thing we needed to do was modify BIOS to enable virtualization which was part of the Intel 2x E5-2620 chipset already.
I am very pleased with XP Mode. The scientific writing software for my thesis that I was worried about does actually run in Windows 7 under compatibility mode, but there have been some huge advantages to installing in in XP Mode as well. I still have licensed
copies of Office 2003, Acrobat Pro 9, and MathType 5.2, and other old software as well. I now have all new software, for example Office 2010 (64-bit), Acrobat Pro 10 (32-bit for 64-bit), and MathType 6.8 (64-bit), and lots of other things. However, now that
I have my scientific wrtiting software (for which the maker has not caught up with Windows Vista/7) installed in XP Mode, I have also installed WORD 2003 with MathType 5.2 in XP Mode. My scientific writing software can translate WORD 2003/MathType 5.2 in RTF
format to LaTeX. So lets hope these guys eventually catch up with Windows 7 and 8.
I am also using XP Mode to archive a large block of my old data from the XP days. I still have licensed copies of the out of date software. And I would rather not update every single old file I have to a current format. So altogether, XP Mode is working
out quite well. It is very fast with my Intel 2x E5-2620 and maximum RAM.
1011::1000
1011::1000

Firefox hangs on startup in normal mode and safe mode, won't start in reset mode

using FF 26.0
using windows 7 home premium v 6.1 (latest)
My problems started after loading FF 26.0. If I start FF in regular mode it hangs. Same thing happens when I start in safe mode. I can shut FF down (while it is hung) by clicking the X in the top right corner.
When I start FF in safe mode and choose reset FF, it hangs without FF ever appearing; I have to shut it down using task manager. After shutting down in reset mode, I can start FF in regular mode and everything works fine. However, stopping FF does not shut it down. I have to use task manager to shut it down. Then I am back to square one when trying to start FF, i.e. reset firefox, hangs, task manager shut down, then start FF.
When FF is running, I can open a new FF window.All my addons are up to date. I have reinstalled FF 26.0, three or four times.
I have cleared cache and cookies.
I have scanned for viruses and rootkits etc. with microsoft security essentials and spybot.
I have been a happy user of FF for more than a decade and have never had a problem like this. Any help will be appreciated.
Thanks!

There has been an issue reported with a snippet on the about:home page.
See [[/questions/984193#answer-525530]]

Installed the latest update and now Finder refuses to start/crashes

Hey guys,
I just installed the latest 10.4.11 update or whatever, along with Quicktime, iTunes, etc., and now when I log in to any account, Finder refuses to start. If it does start, it crashes.
I've googled around and all I could find was that I should switch from one Admin account to another to stop it, but that looked outdated and didn't work anyway.
I'm on a PowerBook G4, 10.4.11. Hopefully someone can tell me how to fix this soon.

Hi, and a warm welcome to the forums!
Actually, I take double posting to mean you started the same Topic in two different placesat once!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates again, or even do an A&I if you have enough free disk space.
An Archive & Install, which gives you a new OS, but can preserve all your files, pics, music, settings, etc...
http://docs.info.apple.com/article.html?artnum=107120

VMs won't start after updates and reboot.

I need some help.
I installed the November 2014 MS updates last night. I installed them on my lab Hyper-V box. The Hyper-V box is joined to a domain but is not a domain controller. It is Server 2012R2 with Hyper-V with all previous patches applied. I had two VMs configured
on the box. The VMs were a 2012R2 server and a Windows 8.1 box. Both were running fine. In fact I shut them down before I did the Microsoft Updates on the server.
The issue I describe below was not present until I did the updates and rebooted. The server and the associated VMs had been running fine for months. These updates are the ones that my SUS server provided to this server.
After I rebooted the server I could not restart either VM. I kept getting the same error that is listed below. I tried DELETING the VM from Hyper-V manager and then building a new VM and using the old vhdx. Again NO LUCK. I even tried CREATING a new VM and
I got the same problem.
(Additional Note: I appeared as though I was able to delete the VM from Hyper-V Manager. Hyper-V Manager displayed 'Destroying....' for some period of time and then the VM was removed from Hyper-V Manager. However, recreating the VM did not solve the problem.)
Each time I get the following error displayed on screen.
'Unnamed VM' could not intiialize.
An attempt to read or update virtual machine configuration failed
'Unnamed VM' could not initialize (Virtual Machine ID)
'Unnamed VM' could not read or update virtual machine configuration: Ran out of memory (0x8007000E) Virtual machine ID B9xxxxxxxxxxxx
=======================
I adjusted permissions on the C:\ProgramData\Microsoft\Windows\Hyper-V folder. Opened it up to "Authenticated Users" based on a couple of TechNet articles that I found. NO luck
In the Hyper-V Config log I get the following entry,
The configuration store at'' is not accessible Unspecified error(0x80004005)
==========================
I also had these errors in the Windows Application log.
ID=1000 Source=Application Error Type=1 Message=Faulting application name: vmwp.exe, version: 6.3.9600.17334, time stamp: 0x5407c751
Faulting module name: vsconfig.dll, version: 6.3.9600.16384, time stamp: 0x5215db66Exception code: 0xc0000194
Fault offset: 0x000000000001966c
Faulting process id: 0xb84
Faulting application start time: 0x01cffe274d55ea6b
Faulting application path: C:\Windows\System32\vmwp.exe
Faulting module path: C:\Windows\System32\vsconfig.dll
Report Id: d4210450-6a1a-11e4-80d6-0019b9eed814
Faulting package full name:
Faulting package-relative application ID:

OK,,so I solved this issue by removing the Hyper-V role and then readding the role. The permissions of C:\Programdata\Microsoft\Windows\Hyper-V
and C:\Users\Public\Documents\Hyper-V definetly changed
as a result of re-adding the role.
All required updates (as supplied by WSUS) are applied also.

Windows Virtual PC and XP Mode refuses to start after update 25 February 2014

Similar Messages

Maybe you are looking for