Windows Virtual PC Issue

I have a Mac Book Pro (OS X 10.6.5) - all firmware/software is updated and current.
I'm running Parallels Desktop and Win 7 Pro on my virtual machine.
I'm trying to setup Win XP with the Windows Virtual PC tool. I'm able to install, but when I attempt to run the app, I'm receiving "this computer does not have hardware-assisted virtualization...".
A workaround is to change the BIOS, but with the MAC and Parallels, I want to know 1) if it is possible to change the BIOS and 2) use Windows Virtual PC in this environment.
MS Support was no help and sent the following links:
http://support.apple.com/kb/TS2744
http://support.apple.com/kb/HT1237
Parallels support stated "I would like to inform you that it is not possible to use Virtualization under a virtualized Windows." (No further information provided...)
Any help/guidance would be greatly appreciated.
Thanks!

I'm running Parallels Desktop and Win 7 Pro on my virtual machine.
Parallels forums are here: http://forums.parallels.com

Similar Messages

Cannot Install Windows Virtual PC 0x80004005

Hi,
I was wondering As soon as my PC The contents of 2010-06-21 22:59:04, Info 2010-06-21 22:59:07, Info Microsoft-Windows-VirtualPC-VMNet, Microsoft-Windows-VirtualPC-VMM, 2010-06-21 22:59:09, Info CSIPERF:TXCOMMIT;2175785
2010-06-21 22:59:09, Info 2010-06-21 22:59:09, Info 2010-06-21 22:59:09, Error 2010-06-21 22:59:09, Info 2010-06-21 22:59:09, Info 2010-06-21 22:59:09, Info 2010-06-21 22:59:09, Info 2010-06-21 22:59:09, Info 2010-06-21 22:59:10, Info CSIPERF:TXCOMMIT;1181384
2010-06-21 22:59:10, Info 2010-06-21 22:59:10, Info 2010-06-21 22:59:10, Info 2010-06-21 22:59:10, Info 2010-06-21 22:59:10, Info 2010-06-21 22:59:10, Info 2010-06-21 22:59:10, Info 2010-06-21 22:59:10, Info 2010-06-21 22:59:10, Info 2010-06-21 22:59:10, Info if anyone could help me because I am unable to install Windows Virtual PC (KB958559) on Windows 7 Ultimate 64 bit with an i5 750 CPU.
reboots I get an 0x80004005 error code when Windows Update is nearing completion. I have tried reinstalling the Windows Update Agent without much luck.
my CBS.log file are:
CSI e35}, Type neutral, TypeName neutral, PublicKey neutral }
CSI 000000f5 Component changelist required a reboot - 2 components are marked BootCritical
Version = 7.1.7600.16393, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
Version = 7.1.7600.16393, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral
CSI 000000f6@2010/6/21:14:59:09.558 CSI perf trace:
CSI 000000f7 No more queue entries, deleted pending.xml
CBS Startup: Primitive operations were successfully rolled back.
CBS Startup: Completed rollback, startupPhase: 0. [HRESULT = 0x80004005 - E_FAIL]
CBS Setting ExecuteState key to: CbsExecuteStateFailed
CBS Doqe: Enabling Device installs
CSI 000000f8 Cancelling transactions: [1:[109]"TI4.30085457_3236419816:3/Microsoft-Windows-VirtualPC-Package-TopLevel~31bf3856ad364e35~amd64~~7.1.7600.16393"[1]"]"
CSI 000000f9 Creating NT transaction (seq 2), objectname [6]"(null)"
CSI 000000fa Created NT transaction (seq 2) result 0x00000000, handle @0x26c
CSI 000000fb@2010/6/21:14:59:10.510 CSI perf trace:
CBS Clearing HangDetect value
CBS Saved last global progress. Current: 1, Limit: 1, ExecuteState: CbsExecuteStateFailed
CBS Doqe: Unlocking driver updates, Count 3
CBS WER: Generating failure report for package: Microsoft-Windows-VirtualPC-Package-TopLevel~31bf3856ad364e35~amd64~~7.1.7600.16393, status: 0x80004005, failure source: GC, start state: Staged, target state: Installed, client id: WindowsUpdateAgent
CBS Failed to query DisableWerReporting flag. Assuming not set... [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
CBS Failed to add %windir%\winsxs\pending.xml to WER report because it is missing. Continuing without it...
CBS Failed to add %windir%\winsxs\pending.xml.bad to WER report because it is missing. Continuing without it...
CBS SQM: Reporting package change completion for package: Microsoft-Windows-VirtualPC-Package-TopLevel~31bf3856ad364e35~amd64~~7.1.7600.16393, current: Staged, original: Staged, target: Installed, status: 0x80004005, failure source: GC, failure details: "80004005 netcfg.exe 41001 38 Install (first install) Microsoft-Windows-VirtualPC-VMNet, Culture=neutral, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=amd64, versionScope=NonSxS ", client id: WindowsUpdateAgent, initiated offline: False, execution sequence: 113, first merged sequence: 113
CBS SQM: Upload requested for report: PackageChangeEnd_Microsoft-Windows-VirtualPC-Package-TopLevel~31bf3856ad364e35~amd64~~7.1.7600.16393, session id: 142862, sample type: Standard
CBS SQM: Ignoring upload request because the sample type is not enabled: Standard

Hi,
I would like to suggest you perform the following steps to troubleshoot this issue:
1.
Disable antivirus program and try to install Windows Virtual PC again in
Clean Boot.
2.
Try to reset Windows Update components and install
System Update Readiness Tool to test the issue.
3.
Update the
Windows Update Agent for Windows 7 x64 to check the result.
Does it work?
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Windows Virtual PC and XP Mode refuses to start after update 25 February 2014

I have been using Virtual PC and XP Mode now successfully for more than 1 year. I am running Windows 7 Profession on a i7-2600 with 8 GB
But after the update on 25 February 2014 to both the XP Mode and Windows 7, my Virtual PC no longer works. It loops continuously and never starts.
Is anyone else having this problem? Are there any hot fixes? We have our accounting and address management system running in XP mode, so this is quite important to find a fast solution.
Thanks very much
David

Hi,
Rename the .vsv (virtual machine saved states) file in "C:\Users\[user id]\AppData\Local\Microsoft\Windows
Virtual PC\Virtual Machines",then start the VM again.
As a test, you can also uninstall the newly installed updates, check whether this issue is related with the updates. Generally, Windows Updates will not cause any issues, but if some software installed in your system conflicts with it or the updates
not installed correctly, it will cause some unexpected issues.
Regards
Yolanda Zhu
TechNet Community Support

Windows Update Stalls When Running in Windows 7/Windows Virtual PC/Win XP_ Mode

Hi
This is Bob in Tallahassee. Can anyone please help. I installed Win7 Pro on a newly built PC and then Windows Virtual PC/Win XP Mode. When I try running Windows Update in the XP mode window, it keeps cycling "searching for updates"
and never reaches the next step, never stops cycling. I checked msconfig and there is a process "svchost.exe" eating 99% of resources. It is likely related to windows update. When I shut it down, my internet connection is cut
off, but the Windows Update still keeps cycling. I have tried all I know, including optimizing bios for virtualization. Is there another setting that I'm missing? Thanks. Bob

Hi,
I find some error information in your log:
Windows Update error 80070643
http://windows.microsoft.com/en-in/windows/windows-update-error-80070643#1TC=windows-7
You can refer to this link to troubleshoot your issue:
.NET Framework update installation error: "0x80070643" or "0x643"
http://support.microsoft.com/kb/kb976982/en-us
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support

Can't install my printer on Windows virtual machine using Leopard OS

Have just installed Leopard and Parrallels software. I cannot install my HP C3180 printer on the virtual windows machine. USB plug and unplug are not recognized and suspect it is because the printer is in use on the Mac OS side. How can I get the same printer to be connected and usable in both MAC and Windows virtual machines?

I had exactly the same issue as you when I wanted to print from my iMac to a printer that was attached to a Windows 7 machine.
I found the solution at an Apple Support page, located at "http://support.apple.com/kb/HT3049".
What really solved my problem was the introduction of the user PASSWORD in the address line, like this:
smb://user:password@workgroup/server/sharename
Read the Apple Support page I mentioned carefully to better understand what you will be doing.
I hope this helps you.

Pixma ip6000d windows 7 driver issue. How do you get one?

Has anyone solved the windows 7 driver issue? The canon website does not have one yet is reported windows 7 capatable.

Hello ricksterofmi,
The PIXMA iP6000D Drivers are included with the Windows 7 Operating System through Windows Update. Please connect the PIXMA iP6000D to your computer and automatically install the drivers. Once this has been done, visit our website by selecting this LINK to download and install the Add On Module for full compatibility.
I hope this helps.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Windows Virtual PC running Windows 7 Pro on Windows 7 Pro with Network Sharing (NAT)

I have been trying to get a new install of Windows 7 in Windows Virtual PC 6.1 to use the Shared Networking with the Windows 7 host.
It works with Windows XP as the guest. I tried changing the DNS to 192.168.131.254 and 252. It works through a dedicated NIC but I need NAT because I have to use the IP of the host (this is in a computer lab where students play with their own Windows 7 vhd).
Any help would be appreciated.
Randy

Try http://social.technet.microsoft.com/Forums/en-US/w7itprovirt/threads
The following is signature, not part of post
Please mark the post answered your question as the answer, and mark other helpful posts as helpful, so they will appear differently to other users who are visiting your thread for the same problem.
Visual C++ MVP

Windows XP mode/ Windows virtual PC

I have to support some LV7.1 programs (along with newer versions). I just bought a new laptop with Windows 7 Home 64-bit. LV7.1 loads and runs, but the drivers disk pukes on the 64-bit OS. (This was not unexpected...)
The new PC does have an Intel processor that will support Windows Virtual PC and Windows XP mode.
I will need to upgrade to W7 Pro, but before I do, I'd like to get some feeling that it will all work. Should older NIDaq, MAX, etc. install OK in XP mode?  Has anybody done this? Is there another solution that is better?
Solved!
Go to Solution.

Seth,
Thanks for the speedy reply.
I try to use NI-DAQmx, but I won't swear that I don't have traditional DAQ routines out there. I would like to run real hardware (USB DAQ) on my new laptop, de-bug and burn executables.
What are my options? I could keep LV7.1 on my old desktop, newer versions on my new laptop. Would I be running afowl of LV's EULA? Does NI care about antique versions of LV?
I see that NI-DAQmx 9.0 supports versions LV8.2.1, 8.5.1 and 8.6.1.  If I put these on my 64-bit, will executables I make run on 32-bit target systems?
I don't want to flush Windows 7 64-bit to install the 32-bit. I want it all!
My company has let my subscription lapse. I don't have LV 2009. Not much chance of an upgrade this year...
Regards,
John Spencer

Running windows virtual. Will thunderbolt ethernet adapter work?

Hi
I need to program SIEMENS PLC. I want to buy a mba but this program (step 7 tia portal) only runs on windows. so I want to run it in virtual mode (parallel or virtualbox vw ware fusion.. w/e). The older plc's can be programmed with a usb connection but this connection (usb) will work in windows virtual mode right?
but here's the deal, the newer plc's can ONLY be programmed with a internet connection. so I need to give my virtual windows 7 a static ip address before I can connect with my plc.
will these both connections work? I need to know before I buy one.. and everyone gives me different answers..
thnx alot.
ps: sorry for bad english

Here is a screen shot from VMware. This is accessible from the Settings -> Network Adapter -> Network Adapter Settings...
If you click on the TB Ethernet, radio button (as highlighted by the box), it will prompt you for the Administrative password and then create a virtual bridge interface using this physical connection.

SP1 for Exchange 2013 install fails with ECP virtual directory issues and now transport service won't start and mail is unavailable

SP1 for Exchange 2013 install failed on me with ECP virtual directory issues:
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ecp (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The virtual directory 'ecp' already exists under 'server/name'.
Parameter name: VirtualDirectoryName".
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
Error:
The following error was generated when "$error.Clear();
          $BEVdirIdentity = $RoleNetBIOSName + "\ECP (name)";
          $be = get-EcpVirtualDirectory -ShowMailboxVirtualDirectories -Identity $BEVdirIdentity -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
          if ($be -eq $null)
          new-EcpVirtualDirectory -Role Mailbox -WebSiteName "name" -DomainController $RoleDomainController;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
          set-EcpVirtualdirectory -Identity $BEVdirIdentity -InternalUrl $null -ExternalUrl $null;
          . "$RoleInstallPath\Scripts\Update-AppPoolManagedFrameworkVersion.ps1" -AppPoolName:"MSExchangeECPAppPool" -Version:"v4.0";
        " was run: "The operation couldn't be performed because object 'server\ECP (name)' couldn't be found on 'DC0xx.domain.com'.".
!! And now transport service won't start and mail is unavailable !!
Any help would be appreciated.
I have removed the ecp site from default site and attempting to rerun SP1 now. I do not have high hopes. :(

Hi,
Thanks for your response.
From the error description, you need to manually remove the ECP with IIS manager in both the Default Web Site and the Exchange Back End firstly. And then continue the upgrade to check the result.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Windows Virtual PC (KB958559) will not install, "This update is not applicable to your computer."

Windows Virtual PC KB958559 never installs. It says "This update is not applicable to your computer." Here are my details...
Dell Inspiron M6400, Intel Core2 Duo T9550, Hardware Virtualization is present and has been enabled in bios which was updated recently
Windows 7 Ultimate 32-bit, build 7600.16539.x86fre.win7_gdr.100226-1909
Any ideas? I have seen the other posts but nothing seemed to be a solution. Another strange behavior that may (or may not) be related is that when I try to load the "Turn Windows features on or off" the box loads blank.

Firstly, please read the following article on how to resolve the blank dialog box of “Windows Features”:
The "Windows Features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes
the following code when you try to use Windows Update: "0x80073712"
Then,
empty the Temporary Internet files and %Temp% folder.
At last, download
Windows Virtual PC again and install it.
Best Regards
Dale

Got an error when install oracle 9i in linux 9 in windows virtual server

Hi Guys,
I am installing an oracle 9i in my laptop that is linux 9 server which is hosted in windows virtual server. when I ran runInstaller, I got an eror that is can't connect x11 windows server using........ When I ran xterm, I got can't open dispaly. xhost + also dosn't work. Is that ok that I can install oracle in a linux that is installed in windows virtual server? What value can I set to DISPLAY value?
Thank in advance.

Linux 9? You mean the one that was end-of-lifed in 2004? (Just checking ...)
If yes, you gotta decide whether it's the 'Linux 9 Boxed Version' or the 'Linux 9 Download Version'. The two have completely different compiler and glibc packages that are incompatible. Fix that incompatibility - relative to Oracle's needs - and you will be able to make Oracle9i limp along.

SWTBot tests inconsistent for Kepler in Windows Virtualized Environment

Hallo,
I am using SWTBot to test an Eclipse E4 RCP Application based on Eclipse 4.3 (Kepler).
My SWTBot tests are run as part of a Maven / Tycho Build.
When I launch the maven build on my development workstation the tests are working.
On the build server the maven build is trigged by TFS / MSBuild
Before the 6th of June, 2015 , the tests used to run both in my development environment and in the build environment.
Now, after 6th of June, the tests are not working anymore on the Build server (Vindows Virtualized Environment). There was no code change in the period, but now the tests are failing.
Currently the tests executed on the build server are always returning an error similar to this: "Could not find widget : .. "
As described above, the same tests are working on my local development environment; and the same tests used to work on the build server in previous months.
So,
(1) I am wondering if there was any change in the SWTBot code, that resulted in an incompatibility with Windows Virtual Environment.
(2) Is it possible to get the state of the update site before June 2015 ?
- If so please, tell me how
Thank you in advance for spending your time on this

I love Windows on my MacBook, but I'm not a gamer (at all) and I know gaming is the ultimate road-test. Your post indicates you are likely competent enough to draw a thorough conclusion on your own, but I notice you have not considered malware, spyware, virus & anti-virus interference. I suppose this was likely taken care of by a fresh install, but maybe reinfection happened just as fast. One thing I have done is to open Device Manager and identify + update all possible stale drivers. Apple is not that aggressive at providing new ones.
Must be vexing to have this happen, but it is an interesting post, since people everywhere are wondering if Apple hardware really IS as good as PC....
I invite gamers everywhere to add to this..... Cheers

Can Adobe Media Server be installed on a Windows Virtual Server?

Can Adobe Media Server be installed on a Windows Virtual Server?

Yes, Adobe Media Server can be installed on a windows virtual server.

Windows 7 Firewire Issues with CS5 and ADVC-700

I've got a Windows 7, 64 bit system with CS 5. In dubbing out for playback, I route a firewire cable from the PC to an Canopus/Grass Valley ADVC-700. Both units are less than a year old and are having issues with "black outs" during the dub out process. I've read different things about Windows 7 having issues with firewire drivers. After speaking to someone with Adobe, I've changed my firewire driver to Legacy. That hasn't helped.
The ADVC-700 has s-video out running to preview monitor and BNC out/XLR audio running to my playback system for ingest. When the video goes to black (usually for a 1/2 second), the audio drops out with it.
I've reset the settings on the ADVC-700 with no luck.
Any suggestions on a fix or something else to try?

I did test with a JVC GY-HD200U and there weren't any performance issues which led me back to the PC or other on the PC.
The system is running Windows 7, 64 bit with CS5 Production Premium following an upgrade from the CS4 version.
I've got 12 GB of Ram, (2) Intel Xeon Quad Core E5560 -2.8 GHZ processoCrs.
(1) 500GB SATA2 hard drive, 7200 RPM, 32 MC (System Drive)
(3) 1 TB SATA2 Hard drives, 7200 RPM, 32 MC (3 TB, RAID0 Storage Drive)
Nvidia GeForce 9800GT graphics Card
Supermicro X8DAi motherboard, Intel 5520 Chipset, 2-PCIe X16, 1 PCIe x4, 3-PCI, 10-USB2 ports, 2-pro/1000 NIC, 8-channel HD audio, 6 SATA ports, RAID 0/1/5/10
I've got the legacy drivers for the firewire card. I've checked to make sure all of the power save options are off along with all screen saver options. I've cleaned my Adobe Cache out, deleted my Adobe Preferences, went from the 4pin/6pin cable to a 6pin/6pin cable to feed the ADVC-700 from the PC, reset the ADVC 700 back to factory specs...all of this with no luck.
The problem seems to be worse since the move from CS4 to CS5 but it's hard to tell.
I've also hooked up an older ADVC-500 unit with the same output results.
I think I noted in the first post that this is happening on two indentical systems with the same cabling and programs and the same ADVC-700 boxes.
I've been told by Adobe to clean my C; drive and reload the OS and Adobe CS5 as I should have done that when I upgraded instead of just upgrading the system from CS4 to CS5 using the discs. I haven't done this yet as I have to budget time/workflow to accomodate.

Windows Virtual PC Issue

Similar Messages

Maybe you are looking for