Windows Vista 32 bit

Windows Vista 32 bitx Hey guys and gals,
This problem maybe on the wrong thread but I'm stuck between a rock and.......well you know!
I just got a new computer with Vista 32 bit OS and 3 gig af Ram and 2 core quad. I've put in a sound card.....emu 22m and loaded up the appropriate driver.......v2. driver with it's applications. I am using the virtual console patchnmix DSP to try and link together my ins and outs(yamaha AW446 with 8 channel ADAT connection to my computer and Sonar 7 as my music software program)(by the way, the light at the end of my optic cable is working well). The configuration of my AW446 in copasetic(has not changed for years)(worked with my last 2 computers) and the configuration of my Patchmix DSP looks as though it is fine and dandy. The ASIO outs work fine. The problem is that I'm getting absolutely no signal on my PCI card ADAT /2,3/4,5/6,7/8 As I'm looking at the Patchmix virtual console while I sing into a hot mic!!!!
Can anyone give me some trouble-shooting ideas? Or even better.....give me some answers!!!!!
I'm at my wits end here!!!
Desperate and confused,
hoserlover

Hi,
Do you mean Windows boots straight into Safe Mode? If this is the case, try the following.
Let the notebook start in Safe Mode. Then hold down the Windows key and press R. Into the Run Box type msconfig and hit enter. In the System Configuration window, click the Boot tab and look to see if there is a tick in the box next to Safe boot - if there is, click the box to remove the tick and then click Apply to save the change. Restart the notebook and see if it will boot normally.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Installed CS3 with windows vista bit AE won't open.

When my old faithful computer motherboard fried, I had to get a new computer with Windows Vista Home Premium.
I had CS3 loaded and working without a glich on my old XP computer.
I've loaded the whole CS3 suite, but when I open After Effects nothing happens. Using Window's Task Manager, under "Applications" After Effects doesn't show up as a running but under "Processes" the file "AfterFX.exe *32" is listed as running.
I've also tried uninstalling CS3 and reinstalling it in the directory "Program Files" rather than in the directory "Program Files (x86)" and nothing changed.
I've tried to opening all the other programs in CS3 with the similar results. Nothing opens, but their .exe files are listed under Task Managers "Processes".
I'm using this as a vol lic product, so I'm not sure how much tech support I can get.
Thank you for any help you can give me.

I'm sorry it didn't work. I probably don't have an answer for you since I'm not an expert or anything.
One thing I thought was weird was that the software version on my computer for the motherboard was version 6.xx (whatever) and the software I downloaded from the HP web was version 5.xx (whatever). It made it work though..
I think the update would be on the HP site, not the MSI site. Go to hp.com, downloads, and put in the name of your computer. Download/install whatever motherboard software they have. If that doesn't work, go to the adobe website and search for the document kb402213 and work through that. It's what the person you give Adobe $40 to help you is going to do.
Good luck. Hopefully this helps.

After rebooting my Windows Vista 64 bit system, could not access iTunes; after uninstalling I tried reinstalling, but it has been running for more than 24 hrs. Should I cancel installation?

I had been updating my Windows Vista 64 bit system and as a result of a problem, had to reboot my system. Afterwards, I was no longer able to access iTunes. I got a message stating that there was a problem with some of the files associated with the application. A phone rep at Apple's Customer Service provided me with emails linking instructions on completely uninstalling and reinstalling iTunes. I did the uninstall, then checked for lingering iTunes files and couldn't completely remove some, but tried intalling the latest version of iTunes. It has been running for roughly 24 hours. The status bar is green all the way across, and when I try to cancel, I get the following message: "Are you sure you want to cancel iTunes installation?" I keep hitting "no," but am staring to wonder if there is a problem with the install. Should it take this long if I have roughly 134 gigs of music? I can still see the music in my computer's C drive, so I am worried that there is an error, perhpas because I didn't clear out all the lingering C:\Program Files\Common Files\Apple\ and all the lingering C:\Program Files\iTunes\. Any thoughts?

It is not just the HP. I have 3 HP computes and 2 Dell computers. 2 of the HP and 1 Dell suffer the iTunes internet block. Took me a while to figure it out also. But, the one thing that is different on the Dell, is that I can leave iTunes installed and not open it and everything works. As soon as I open it, internet access goes down. BUT secure sites (https:) works fine.

Windows vista 64 bit and ipod nano

Hi, we are having problems getting our 3 new ipod nano generation 5 to work on our windows vista computer. Itunes won't recognize them have tried to uninstall itunes but get a message to verify we have sufficient access to that key, or contact support personnel, and then we click ok and it stops the uninstall does anyone know how to correct this problem or what we need to do to get the ipods to work on itunes with windows vista 64bit computer? I saw an answer for a 32bit computer but read that it is different for a 64bit computer. Thanks!

I, too, am having the same problems. Very frustrating to have a nano 4 generation that needs only the latest iTunes software but a computer that requires 64 bit software.
If you get an answer, let me know. I even paid to have music loaded on my nano ipod yesterday and because it was attached to my computer, when I booted up, it somehow went to checkdisk mode and cleaned all the music out! Am ready to throw it out and get a non-Mac ipod instead. But if you have THE answer, I'd really like to hear about it. Thanks.

TA24326 My HP desktop running Windows Vista 32-bit no longer recognizes my iPhone 4 when I connect it. How do I correct this?

My HP desktop running Windows Vista 32-bit no longer recognizes my iPhone 4 when I connect it. How do I correct this?

Device not recognized in iTunes

Can't install itunes on windows vista 64 bit

I'm trying to install itunes on a windows vista 64 bit machine but keep getting the error message "could not access network location %appdata%\." Does anybody know what is the matter?

could not access network location %appdata%\
It looks like it's having trouble getting one of the iTunes preference files in. There's a couple in each user account (usually in C:\Users\<username>\AppData\Local\Apple Computer\iTunes and C:\Users\<username>\AppData\Roaming\Apple Computer\iTunes).
Has a version of iTunes previously been successfully installed on that PC? If so, was it working properly prior to your doing the current installs?
What hard drive is your "Users" folder on? Is it the C drive or somewhere else?
If it's somewhere else, are your Program files also on that other drive or are they on the C drive?

Why can't I install Itunes on windows vista 64 bit?

Why can't I install Itunes on windows vista 64 bit? I have removed all apple software and repeated the reinstall many times but it fails. I get this complicated error mesage and then the installer rolls back and fails.

I get this complicated error mesage and then the installer rolls back and fails.
I'd like to have a closer look at that error message please.
Generate the error message again. While the error message box is open, hold down the Alt key and hit the PrtSc key. Paste the screenshot into an image file (using a program like Paint), and save the file.
Start a reply here and click the wee camera icon at the top of the reply window. Click "Choose file", browse to the image file, select the file and click "Open". Now click "Insert file" to insert the screenshot into the reply.

Live! Cam Voice won't run on Windows Vista 64-bit OS

I recently upgraded my OS to Windows Vista Home Premium 64-bit system. I downloaded the beta softwares (webcam driver & cam center) for my Creative Live! Cam Voice & everything looks fine until I run the Creative Live! Cam Center. Right after running the Cam Center & clicking Start it says initializing then my PC screen turns blue with several error message in it. My webcam also doesn't seems to work.

I am having a problem downloading to a new Windows Vista 64 machine. When I download using either IE or Firefox, the download gets to 14.7 MB and stops. Any ideas on why the download will not work?

Unable to print from my window vista 32 bit laptop to HP deskjet ink advantage 1515

I have window 32 bit vista system. I installed my new HP deskjet ink advantage 1515 , but I am not able to print. I tried install and uninstall many times, run HP Print and scan doctor. No problem reported in installation but failed to print.
Pls help

Hello @HarpreetS , and welcome to the HP Forums, I hope you enjoy your experience!
I see you're running into print issues. I would like to help.
Do you recieve any sort of error messages?
I would suggest Uninstalling the Printer Software.
Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows.
Once the computer is in clean boot mode, I would suggest reinstalling the HP Deskjet 1510 e-All-in-One Printer series Full Feature Software and Drivers.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Windows repair installation Pavilions a6720y Windows Vista 64 bit

Can you provide a Windows Repair Installation Disc?
I recently had a serious PC problem. I knew that I would have to hand my PC over to someone and selected a Local Technical Specialists (Geek Squad) who diagnosed it as a crashed main HD, installed a new Drive and reinstalled the OS from recovery disks provided by HP.
I personally had to reinstall many programs and settings. I needed specialist assistance to reestablish my home network that did work before the crash with the same hardware but not after.
My Main PC is a desktop:
HP Pavillian,
Model a6720y,
Windows Vista Home Premium 64 bit,
6GB Physical Memory,
connected to a DSL Modem via Ethernet connection.
My second PC is a Dell Pavillion B130 Laptop, Windows XP
DSL Modem provided by Verizon, is a WestTell modem.
I have an External 1 TB HD from HP, a HP HD3000, Ser # TH1B32Y047
The System Recovery was performed with discs that I received from HP. System Recovery, Windows Vista Home Premium SP1, HP505283-001, Build ID 91ANv6PrA1.
I am contacting you because I believe that something went wrong with the reinstallation or there was more that should have been done after the initial Reinstall.
Within hours of bringing the PC home, I discovered that Windows Media Player was not working. I contacted the local support organization. They advised that yes there was a problem with Windows Media Player and downloaded an alternate program for playing Videos, VLC.
After installing several 3rd party program that were Video DVD maker Utilities, I started to have problems that did not exist before the reinstall. This is of course with the same hardware except for the new Internal HD.
I contacted the local support because I was having serious problems reestablishing my at home local network. I was informed that there were some serious Vista problems.
Can you comment on the above?
Can you provide a Windows Repair Installation Disc?
My PC is out of warranty but I did purchase and renew that HP Care Pack Support Service. That may also have expired. My last renewal that I can find was Tran # CA03207588-0001.
Your response to the above, especially your advice on a Windows Repair would be appreciated.
Sincerely,
William [Personal Information Removed]

Bill, welcome to the forum.
This is a peer to peer help forum. The only presence that HP has on it are the Admins and the Mods. Otherwise, none of us works for HP.
Windows Media Player is an integral part of Vista. Here is a update for it. I suggest installing it to see if it corrects your problem.
Here is a guide that will help you make a Vista repair disc.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".

I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".processorArchitecture="x86""

Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR

ITunes won't install on Windows Vista 64-bit : Error Message

I got my dad an iPod Mini for Christmas. I've been trying to install iTunes onto his computer so that he can download music and all that stuff on his own. It is not downloading for me. Quicktime downloads, but I get an error for iTunes.
"An error occurred during the installation of assembly "Microsoft.VC80.CRT, version="80.50727.4053", type="win32", publicKeyToken="1fc8b3b9a1e8e3b", process or Architecture="x86"."
His system specs are as follows.
Windows Vista Home Premium
AMD Phenom 9150e Quad-Core Processor 1.80GHz
4.00 GB RAM
NVIDIA GeForce 6150SE nForce 430
64-bit Operating System
Can anyone tell me what I'm doing wrong or how to fix it. iTunes has never been installed on his computer before. I'd really like to get this up and running soon. Any help would be greatly appreciated. Thanks.

80070424
Accck. Have you checked to see if you've got a broken Windows Modules Installer, ral? See the following thread for troubleshooting advice for that possibility:
http://discussions.apple.com/thread.jspa?messageID=10847979&#10847979
Message was edited by: b noir

Can I install iTunes in separate user accounts on Windows Vista 64-bit?

Hi,
My wife and I use different user accounts on Windows Vista 64-bit. Before I go and mess things up on my computer, I wanted ask some questions:
1) Has anyone has successfully installed iTunes to multiple user account?
2) If so, has anyone successfully shared the same music root directory for 2 different iTune instances.
I'm thinking with iTunes very tight integration with the music files (for indexing/searching, etc), that it would be bad to have add/change/delete on the same music root from 2 independent installations.
Experience OR opinions welcome!

) Has anyone has successfully installed iTunes to multiple user account?
You don't install the iTunes application more than once. Each user account in Windows will have its own iTunes library.
If so, has anyone successfully shared the same music root directory for 2 different iTune instances.
Many people have done so. This should help:
iTunes: How to share music between different accounts on a single computer
Note that iTunes has no folder-watching capability, so if you add a track in one user account, the other user will have to add that new item manually, either by using the Add To Library command or dragging the item into the iTunes window. There are a couple of potential solutions from other developers, though:
http://albumbrowser.klarita.net/iTunesFolderWatch.html
http://www.lifehacker.com/software/itunes/hack-attack-automatically-sync-itunes- to-any-folders-175161.php
Thanks to Meg and Hudgie for the tips.

I have an Ipod Touch 5th Geneation and Windows Vista. Unfortunately, everytime I plug in my Ipod, it changes my monitors display (resolution and bit from a 32 down to an 8) How can I prevent this from happening everytime? I am unable to read my screen

I have an Ipod Touch 5th gen and I'm running Windows Vista 32-bit Home Premium. Unfortunately, everytime I plug in my ipod, my screen resolution changes and i go down to an 8 bit from 32...on its own. I can I prevent this from happening every time I plug it in to my pc?

All I can suggest is:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
http://support.apple.com/kb/HT1923Seems it is a windows problem.
You can also try rolling back the driver for your video card.

Getting error code 0x400110020000100b while doing system recovery for windows vista 32 bit.

I attempted to do a system recovery on my Laptop using the included recovery discs and got this error 0x400110020000100B. THe disc looked pretty beat so last week I ordered a new set. Now when I got to put disc 2 in (at 80% complete) I get the same error. I called customer support and he took me through the F9 process to no avail and I've also tried the F11 approach which got me no where. I'm frustrated because I really don;t have the money for a new laptop.
Laptop is a HP Pavilion DV6700.
Any help would be appreciated more than you know.
System is Windows Vista 32 bit
The guy on the phone said "well ya know thats a pretty old computer"...gee thanks..
This question was solved.
View Solution.

You're very welcome.

Cannot install itunes 11.1.3 to my windows vista home premium 32-bit. After it finishes the download that it verifies the file I get a message saying "this file cannot be downloaded". What could the problem be??? I uninstalled my itunes and tried again

Cannot install itunes 11.1.3 to my windows vista home premium 32-bit. After it finishes the download that it verifies the file I get a message saying "this file cannot be downloaded". What could the problem be??? I uninstalled my itunes and tried again and keep getting the same message. Please help !

See Troubleshooting issues with iTunes for Windows updates.
For downloading issues see the further information area and use a different browser and/or the direct links.
tt2

Windows Vista 32 bit

Similar Messages

Maybe you are looking for