Windows vista 64 bit won't recognize driv

Hello: I am running windows vista 64 bit with 4 gigs of ram and I have loaded all the software that is on the cd and went to the website and loaded the 64 bit drivers but am having problems with the computer system not recognizing the camera or the drivers at all. Is there something else I need to do for this to work I am running Creative Live Cam Voice. Thanks. Mark

I'm in a similar situation with the Intel 6850, 4 MB of RAM, and the Xi-Fi Extreme Music. I am running VISTA Home Premium 64 bit. I bought my new computer at the end of Sept. and the sound has been on and off mostly off since then. Most of the time I just get static. I have the latest driver installed (I think its Nov. 4) but very, very poor sound.

Similar Messages

TA24326 My HP desktop running Windows Vista 32-bit no longer recognizes my iPhone 4 when I connect it. How do I correct this?

My HP desktop running Windows Vista 32-bit no longer recognizes my iPhone 4 when I connect it. How do I correct this?

Device not recognized in iTunes

Windows Vista Set-Up Won't Recognize Promise Driver - **UPDATE April 15**

In my ongoing efforts to format and set-up a Maxtor 15K Atlas II as a boot drive,
I am still unsuccessful. The latest roadblock is that in attempting to install Vista
Business 64-Bit, Windows Set-up does not recognize any of the Promise drivers
as compatible with my hardware.
MSI K9A2 Platinum - version 1 (currently using v1.4 BIOS)
AMD 5000+ Black Edition CPU
MSI Radeon 3870 GPU
WD6400AAKS (Boot Drive)
G.Skill DDR2 800 (1GB stick)
Corsair VX550W PSU
Logitech cordless Keyboard & Mouse
22" Viewsonic Monitor
Windows Vista Business 64-Bit
Any suggestions?
Tia.
JB

Quote from: richunix on 14-April-08, 20:56:43
Make sure you are BIOS version 1.3. BIOS version 1.4 will not support the Promise RAID. You would believe how many days I went through :wall:until I contacted MSI only to be told you have remove BIOS version 1.4 and re-flash to version 1.3. Sometime I hate tech supoort .
Richard
Yep, went through the same thing here, and re-flashed back to 1.3 a couple weeks ago.
Got my Maxtor 15K Atlas II SAS drive back from Seagate, and the drive they sent me
seems to be healthy -- at least now it can be SEEN in the Promise FastBuild Utility.
Problem now i, Windows Set-up still refuses to SEE the drive, even after installing
the correct Promise drivers -- which means STILL no way to get this drive
working with this board.
I even tried booting off a SATA drive and seeing if Windows could format it that way,
but it still doesn't see the drive in the Drive Management control panel.
My drive is good. My SAS cable is good. I just can't get this SAS drive formatted.
This is going beyond suckish.
discouraged.
JB

Windows vista 32-bit X-Fi Platinum driver. When Does It Arriv

Let me just first say that i love every Sound Blaster i've ever tried (nope i never used an Audigy, went straight to SB-Li've 24-bit. And i know this is a standard flame-post, but we all deserve some clear response instead of the same old fuzzy replies.. I mean, okay i understand its in development, ironing out bugs, etc.. But please just give US, the PAYING customers a friggen TIMELINE!!When is the official full-featured driver/softwarebundle coming for Vista?I have read all the posts, "i dont have a date yet, but we will post it once we do."?Okay, i dont care about a date. Just tell us if it is coming this quarter, or in the summer, or next winter.Okay? Please just give us some kind of friggen idea of WHEN!After all we paid for the card, its because of your customers that you are still in business, without customers there can be no business. You cant honestly expect ALL your customers to sit and refresh this forum every day / week waiting for the driver, YOU have to make a statement.So please tell us an approximate area within 4 months of when it is expected to be released.And dont tell us "no", there is no reason to. Just state a basic expected/estimated/even a guess, i dont care if its off by 2 months, as long as i know if i can expect it BEFORE or AFTER the summer. Thanks.

I had the X-Fi Fatality installed with Windows Vista Home Premium and received BSOD all the time. Today the BSOD's started happening about 2 minutes after a restart and the reboot would take 30 minutes for Windows to make it make into the login screen.
I was afraid that just disabling the Creative card would leave the drivers and other Creative junk software on my system. I pulled the OS hard dri've, pulled the Creative card, and installed Vista on a new hard dri've.
Man am I excited. My onboard sound works great. 5. is amazing.
Only reason I bought a Creative card was for the breakout box. It's not worth all the crashes to just get a breakout box.
Creative, you will never receive a recommendation from me. Thanks for robbing me of $200.
usfryan, pull that baby and walk away smiling.

Windows 7, 64 bit, won't recognize my new ipad 4

When Ipad4 is connected to computer by usb cord, the ipad is not recognized.

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
 Cheers, Tom

Windows Vista 32 bit and also 64 bit driver available for my HP-deskjet 5650 color inkjet ?

I have an HP-deskjet 5650 printer connected to my desktop pc that is running Windows XP and it prints fine. I have 2-other laptops on same network with Vista-32 bit on one and the newest laptop has Vista-64 bit. When I set up the network print connection by putting in the computer name and then the printer name it says a driver is missing on the server pc,which is actually the XP-desktop. Back on the desktop I made sure the printer was shared for the network. Then it also stated that if I was trying to print from a pc with a different O/S then you must add newer drivers which would have to be Vista.After checking,I dont think any are available for the deskjet-5650. Does anyone have an answer?

HI,
The work around that appears to work is to choose the Deskjet 990 driver from the list of printers supplied in the Windows Vista operating system.
Install the driver
Install the compatible print driver on the computer.
Make sure that the USB cable is not connected to the HP product.
From the Windows taskbar, click the Windows icon (), type control printers in the Start Search box, and then press Enter . The Printers window appears.
Click Add a printer and then click Add a local printer .
Click the Use an existing port check box.
In the Use an existing port drop-down list, select LPT1: (Printer Port) and then click Next .
Under Manufacturer on the Install the printer driver dialog box, select HP .
Under Printers , select the Deskjet 990 and then click Next .
In the Printer name text box, type the HP product name and then click Next . The print driver starts to install.
NOTE:The name of the alternate print driver appears as the default name. The name can be changed to the name of the HP product, if desired.
9. After a message appears on the computer that the product was added successfully, connect the USB cable to the product and to the computer.
10. On the Found New Hardware screen, click Cancel .
NOTE:If multiple pop-up windows appear, click Cancel on each window.
Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am employed by HP

Palm Z22 won't sync to new laptop Windows Vista 64 bit

I just got a new laptop and I am unable to sync my Palm Z22 with windows vista 64 bit. My computer keeps saying I need a device driver installed but it can't find it. I did read some of the other threads but am still confused. My laptop is bluetooth compatible but my palm is not. Is there a way to make my Palm bluetooth capable? Or any other way for the device to sync?
Post relates to: Palm Z22

Because the Z22 has neither Bluetooth or Wi-Fi (and has no way to add either, because it lacks an expansion card slot), the only way to Hotsync your Z22 to a Vista 64-bit computer is with Infrared (IR) beaming. That means you will need to buy an IR adapter for your computer. I don't have direct experience in making it work, but this thread discusses how:
http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=36872
Message Edited by smkranz on 05-25-2009 07:51 AM
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

I uninstalled itunes, downloaded new version and the setup file won't launch. I'm running Windows Vista 64-bit. Can anyone help?

I uninstalled itunes, downloaded new version and the setup file won't launch. I'm running Windows Vista 64-bit. Can anyone help?

Is there an error message when you try to launch the iTunesSetup.exe (or iTunes64Setup.exe)? If so, what does it say? (Precise text, please.)

HP Photosmart C4680 driver for Windows Vista 32-bit

I cannot find the HP Photosmart 4680 software driver for Windows Vista 32-bit. The HP website only has the driver for Windows 7 and newer. I tried to install this driver and obviously it didn't work. Can anyone help? Thanks in advance.

HI , I understand that you need the drivers for Windows Vista. I would be happy to help you.
I have provided the link for the Windows Vista drivers. HP Photosmart C4600 All-in-One Printer series Full Feature Software and Driver. If you appreciate my efforts, please click the 'Thumbs up' button below. Thank You.

C driver for Windows Vista 32-bit

I cannot find the HP Photosmart 4680 software driver for Windows Vista 32-bit. The HP website only has the driver for Windows 7 and newer. I tried to install this driver and obviously it didn't work. Can anyone help? Thanks in advance.

HI , I understand that you need the drivers for Windows Vista. I would be happy to help you.
I have provided the link for the Windows Vista drivers. HP Photosmart C4600 All-in-One Printer series Full Feature Software and Driver. If you appreciate my efforts, please click the 'Thumbs up' button below. Thank You.

Satellite A210-16G Mass Storage Controller driver for Windows Vista 32-bit

Hello, I need Toshiba Satellite A210-16G Mass Storage Controller driver for Windows Vista 32-bit. If you have setup file, please redirect me, if you have any other file, please explain me where to install it.

If I were you I would take look to the Drivers Download site of the Toshiba mainpage, because there you can find everything you need.
The mass storage controller can either be the HDD controller or the SD-card controller. I would download both of them.
Heres a direct link to the Drivers page: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
Greets

Windows Vista 64-bit - ITunes died and won't reinstall

Last night my wife let her laptop battery run dry with itunes 10 open. We had just installed it a week or so ago, and had not updated from the online download version.
Anyhow, afterward, when I tried to open iTunes, MS would pop up with a message that the program failed to open properly. The laptop is Windows Vista 64-bit with the 64-bit software.
I uninstalled, restarted, reinstalled, restarted, and tried again. Seemed to install correctly, but still got the crash when attempting to open.
Tried QuickTime, it also will no longer open. Uninstalled both, and no when I try to install iTunes, it goes through the gathering information process of the install, but then pops up with a window saying the installer encountered errors before iTunes could be configured.
I downloaded Windows Install Utility v. 3, but it shows iTunes and QuickTime completely removed (at least no entries were in their to remove).
I also redownloaded the iTunes .exe, with the same results. Even tried the 32-bit, heh, which obviously didn't work, but worth a shot I suppose.
Any help at all would be greatly appreciated.
I did a backup of the registry and went through and hard delete most of the iTunes entries, with no success, so I just restored the registry to the original since I wasnt 100% sure that I should be doing that.

Below are the two most recent problem reports for each of the three programs. No other programs had any recent problem reports. One interesting thing, from the time stamps, there are no crash reports from the last few iTunes install attempts which were giving the message from above and the latest attempt where it just flickers then doesn't do anything else.
IE:
Problem Event Name: APPCRASH
Application Name: iexplore.exe
Application Version: 8.0.6001.18999
Application Timestamp: 4ccf9787
Fault Module Name: mshtml.dll
Fault Module Version: 8.0.6001.18999
Fault Module Timestamp: 4ccfaef1
Exception Code: c0000005
Exception Offset: 00000000003d4d5f
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Information 1: 7fa8
Additional Information 2: ad011ba5f87a70fa4fcf99fe53ccc471
Additional Information 3: 184a
Additional Information 4: 5b6bac566010931808e4f5f3b58e54e6
Files that help describe the problem (some files may no longer be available)
Version.txt
AppCompat.txt
minidump.mdmp
Problem signature
Problem Event Name: APPCRASH
Application Name: iexplore.exe
Application Version: 8.0.6001.18999
Application Timestamp: 4ccf9787
Fault Module Name: mshtml.dll
Fault Module Version: 8.0.6001.18999
Fault Module Timestamp: 4ccfaef1
Exception Code: c0000005
Exception Offset: 00000000003d4d5f
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Information 1: 7fa8
Additional Information 2: ad011ba5f87a70fa4fcf99fe53ccc471
Additional Information 3: 184a
Additional Information 4: 5b6bac566010931808e4f5f3b58e54e6
iTunes:
Problem signature
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.1.0.56
Application Timestamp: 4ce4a7b6
Fault Module Name: QuickTimeCapture.qtx
Fault Module Version: 7.68.75.0
Fault Module Timestamp: 4c87d2a0
Exception Code: c0000005
Exception Offset: 0003c759
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
Problem signature
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.1.0.56
Application Timestamp: 4ce4a7b6
Fault Module Name: QuickTimeCapture.qtx
Fault Module Version: 7.68.75.0
Fault Module Timestamp: 4c87d2a0
Exception Code: c0000005
Exception Offset: 0003c759
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
Problem signature
Problem Event Name: BEX
Application Name: QuickTimePlayer.exe
Application Version: 7.68.75.0
Application Timestamp: 4c87ca48
Fault Module Name: QuickTimePlayer.dll
Fault Module Version: 7.68.75.0
Fault Module Timestamp: 4c87ca3f
Exception Offset: 00005b6d
Exception Code: c0000409
Exception Data: 00000000
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Information 1: ce18
Additional Information 2: 51a1821df37b716a5bcc7d3a608fd9cc
Additional Information 3: a5e1
Additional Information 4: c197509b4c5823cbbe47ce2e6aea41fd
Extra information about the problem
Bucket ID: 1370383568

Saound blaster audigy value windows vista 32 bit problem in driver compatibility!!!

i have installed the sb audigy value latest drivers july 9 2007?and it installed clean and then after a few restart it will detect again the standard?pci to pci bridge and sound devices... when i am using?xp this does not happenwhat is wrong with your drivers? i am installing the?drivers?again and again and same thing happen and my settings reverting always to 6 bit 48khz my card is 24 bit 96khz in the first install... and after a few restart?the setting for 24 bit and 96khz?will dissapear and the only available is 6 bit 48khz somtimes not working? kindly help me... plz... all my problem in windows vista 32 bit has been resolve this is the only one remaining...

Graphic drivers for the iMac is a regular question, and there are some tips and answers. I'd have skipped Vista, too much like beta and gone for 7, but you have it now....
Check the end of this thread with tips:
http://discussions.apple.com/thread.jspa?threadID=1866970&tstart=0&messageID=112 87449#11287449
And take a look for other similar threads.

I've upgraded to FF4 uing windows 7 64-bit - won't open when click on shortcut, have tried to reinstall etc, prev ok with version 3+

I've upgraded to FF4 uing windows 7 64-bit - won't open when click on shortcut, have tried to reinstall etc, prev ok with version 3+

I found something that could be a workaround ... wel at least it's gotten me one step further (windows 7 now recognizes the scanner as the right device (symbol usb sync cradle), but step 8 keeps failing.
source : http://www.pocketpcjunkies.com/Uwe/Forum.aspx/wince/5660/Windows-CE-5-or-6-with-Vista-and-Windows-Mobile-Device-Center
1. Install WMDC 6.
2. Plus the Windows CE based device.
3. Close the "Found new hardware" wizard.
4. Right-click on "Computer" and select "Manage"
5. Open the Device Manager, then select the Windows CE based device.
6. Right-click and select "Update driver..."
7. In the wizard, select "pick from a list..."
8. In the list, select "Microsoft USB Sync [Microsoft]".
9. ... nothing else! It works!
Anything else I could try now?The first time I tried step 8, the microsoft usb sync driver was in the list but I got an error while updating the driver. The second time, it didn't appear on the list anymore. I'm thinking this is more of a 64-bit driver problem.
Thanks, Joachim

Boot Camp Wifi Not Working; Windows Vista 32 Bit

Hey, alright, I got this huge problem. I installed Windows Vista 32-Bit edition on Boot Camp 2.0. I installed the drivers on my Leopard CD. For some reason I can connect to the net on the Leopard side (which I am using right now) and I just can't get a connection on the Windows side. So remember I did install the drivers on the Leopard disc. Also, when I go to device support on Vista, the drivers have yellow triangles beside them. I tried to hook the ethernet cable up and it still won't have an internet connection. I do have the Macbook Pro Aluminum model (newest one) so can someone please help me and tell me what I am doing wrong? Maybe you can tell me a driver I can download to get this working? Thanks!

Boot Camp will not support Vista on newer iMacs, you will need to upgrade to Windows 7. Also as an FYI there is a Boot Camp forum, you can locate it by clicking Apple Support Communities and then in the search field type Boot Camp.
Best of luck,
Roger

Windows vista 64 bit won't recognize driv

Similar Messages

Maybe you are looking for