Windows Vista and Solaris...10...install failed...help.
Hi everyone!!
i installed Solaris OS twice on my system
i have vista previously on this...
i made a partition for sol...
after installation solaris boots fine
but windows is totally corrupted and doestn boot normally
ill have to erase the whole computers HD and then reinstall it again
both the OSs are not working at the same time
with solaris already installed if i try to repair or re install windows vista its erasing solaris partition totally
please help!!! what should i do to get my system running with both OS s.
any replies.....much awaited
thank u so much in advance....
-sriya
Message was edited by:
Sriya
i have dell inspiron...just delivered yday...640m
Message was edited by:
Sriya
Install Windows first, then Solaris {not the other way round}. When Solaris installer detects Windows installation and prompts you whether to preserve Windows partition, make sure to select 'preserve' option. I believe Solaris installer creates appropriate GRUB entries for Windows and Solaris. Even if it doesn't, you can always edit the GRUB menu after the installation is complete.
Check the following web site if you need detailed instructions:
http://multiboot.solaris-x86.org/index.html
Similar Messages
-
Trying to install itunes on windows vista and get the following error message:
Trying to install itunes on windows vista and get the following error message: An error occurred during the installation of assembly "Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKey Token="1fc8b3b9a1e3b",process orArchitecture="x86"". Please refer to Help and Support for more information. HRESULT: 0x80070424.
A broken Windows Modules Installer then. It's a bit of an involved fix getting past it, but we've had success here with it in the past.
First, I'd strongly suggest setting up a system restore point.
Now try the Scenario III treatment from the following document:
Windows Update Error 80070424 in Vista
Head back into Windows Update and attempt to get updates again. If they still fail, this time with an 8000FFFF error code, try the following Microsoft document:
Windows Update error 8000FFFF
If you get Windows Updates flowing again, stock up on any you're behind on (restarting the PC when requested to do so). This may take some time and may have to be done in several batches, depending on how far you've fallen behind. Basically, keep going back to Windows Update until it stops offering you new updates.
After the updates have been installed, restart the PC one more time (in order to ensure that any pending installs requiring a restart have been resolved).
Now try another iTunes install. Does it go through without the 0x80070424 this time? -
I'm trying to install iTunes 10.3 on my PC (windows vista) and I keep getting this message, "There is a problem with this Windows Installer Package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." I accidentally removed the Bonjour service from my system a few weeks ago, but my iTunes continued to work. Now I have no iTunes and I don't know how to fix it. SOMEONE PLEASE HELP!!!!
a colleague of mine suffers from the same problem. did a quick look on the apple support pages. found many topics covering the same problem.
also saw 1 marked as correct answer... (just browse the discussion pages before you ask, this answer appearantly was sitting there from oct. 14...)
(i'm not on windows, so i can't test...)
good luck!
j.
Correct Answer by Peter Lepere on Oct 14, 2011 3:07 AM
Hi Rick,
by "repair" I mean I went to the control panel, option - programs and features, and in the list of all my installed programs I selected "Apple Software Update". On top of the screen you find the options Uinstall, Change and Repair. I clicked the repair button and that did the trick. After the repair I could uninstall the program. I also uninstalled iTunes, Apple Application Support, Apple Mobile Device Support en Bonjour, thus all Apple programs. Then I installed iTunes 10.5 again and everything went fine.
Success,
Peter -
Jre8 is not installing in Windows Vista and Windows 8.
Hai,
When I have tried to install jre8 (latest release) in Windows Vista and Windows8, it was not installed and shown the message "Installation Failed" at the end.
Can anyone suggest me How to install jre8 in Windows Vista and Windows8.
Thanks & Regards,
Gowrisankar C.Try the instructions on this page. They were written at the time of Java 6 but still apply to 7 and 8
Error: The wizard was interrupted before Java(TM) 6 update could be completely installed.
Once you run the MS tool, please install using the offline installer from:
https://www.java.com/en/download/manual.jsp
-Roger -
I have a windows vista and i tried downloading the newest version of itunes and it said it wasnt installed correctly.How can i reinstall it because i went to apple software update and it didnt let me,it told me your software is up to date and then closed on me,please help.
it said it wasnt installed correctly
What's the precise text of that error message, please? (There's a few different ones I can think of that you might be getting.) -
TS1814 I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update serverTry this:
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
I have Windows Vista and my iTunes is v10.5, I have and iPhone 3GS and an iPhone 4. Everytime i try to update my phone to iOS5 it stops on Backing up and freezes. What can i do? Do i need t upgrade my phones on a Mac? Please help it would be greatly appreciated.
Your expectations are not based in reality.
Your G4 will not run iCloud. There will be no upgrade from Mobile Me to iCloud for you with that machine unless you do it manually, and only mail will work without further expenditure. -
I installed iTunes update on my pc running windows vista and now it will not open. Error message MSVCR80.dll missing???
First try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
http://www.apple.com/itunes/download/
If you still get the errors after that, try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
On Windows Vista and tried several times to start up my iTunes, but keep getting 'application failed MSVCR80.dll error-7 (windows 126) is this an easy fix ...?
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99442) -
I have windows vista and I'm receiving a runtime error message R6034 after trying to install latest update of itunes. How do I resolve this issue?
The best discussion of resolving the issues is found in the user tip: https://discussions.apple.com/docs/DOC-6562
-
I uninstalled itunes, downloaded new version and the setup file won't launch. I'm running Windows Vista 64-bit. Can anyone help?
Is there an error message when you try to launch the iTunesSetup.exe (or iTunes64Setup.exe)? If so, what does it say? (Precise text, please.)
-
I have windows Vista and can't download itunes 10.PLEASE HELP!
I also have a 32 bit system. Is it not compatible for that?
-
MOVED: [nVidia Series] Installing Windows Vista and drivers
This topic has been moved to Operating Systems.
[nVidia Series] Installing Windows Vista and drivershello welcome to the forums
do you mean that you have a windows xp that came as a part of a lenovo system?and you want to upgrade it to vista using vlite or your own customized vista installation right?i think you must be quite familiar in slipstreaming service packs into windows installation discs and ofcourse you can also include drivers and all stuff like wallpapers if you like!
if you have further quiries regarding slipstreaming service packs go through the link given below
http://www.winsupersite.com/showcase/xpsp3_slipstream.asp
if you are confortable with slipstreaming you will be able to slipstream lenovo's drivers into the iso image
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo -
Need Help - Windows Vista and Latest Flash Player
Have Windows Vista and Adobe for viewing video. Just recently I was unable to
view the videos. Pop-up showed that I needed to update to the Flash Player 11. I down loaded
as instructed and was advised that download was successful but still can't view the videos
since the same sign shows up. Have tried to see what I'm missing but without much luck.What is your browser? If IE:
http://forums.adobe.com/thread/885448
http://forums.adobe.com/thread/867968 -
I have windows vista and can access my itune downloads but when I try to access the store it thinks about it and then stops - the bar is stuck halfway across. I get no message come up. Desperate to access the store but am at a loss what to do. I am a novice on the computer so an idiot's guide for me would be welcome. many thanks, regards Lesley
I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.
Maybe you are looking for
-
Select Count(*) from Sample_table - how to get the count using JDBC?
Hi All, It would be glad if anyone could help me with this. The problem is that I have to get the 'count' of records selected from a arbitrary table say, 'sample_table'. Is that possible to form the SQL in JDBC as Select Count(*) from Sample_table an
-
Adding WWAN to X300 model 6476-CTO: how do I know if antenna is already installed?
It appears that it is relatively easy to add a WWAN card to my X300 (I watched the video tutorial) BUT I don't know whether or not my X300 came from the factory with an antenna pre-installed. My model is 6476-CTO I want to order the Verizon WWAN car
-
I recently tried to reset my Iphone. i went to settings, reset, erase all content and settings. and when i did it cut off and came back on with the apple icon.. i just stays on that screen and then a loading symbol comes up. my computer does not reco
-
I have LR 5. I started it today to import photos. Received a notice about an update so clicked to do so. It brought me to the CC page. Can I only update but transferring to CC??? I'm not sure what I did b/c I received a "welcome to LR" email. Does
-
Hi, I have question in regards to Deploying configurations to ACE with ANM. I presume it should deploy it in few seconds but for me it takes 8 to 10 minutes. Can anyone suggest why is this taking so much time???? Thanks in advance.