Windows Vista and Windows 7 Only Boots to a black screen with a mouse cursor

Windows Vista and Windows 7 Only Boots to a black screen with a mouse cursor after I installed Mcafee Internet Security.
Hi I installed 1of 3 McAfee Internet Security protections on my HP laptop a few weeks ago with no issues. I Have a Dell XPS 420 desk top with Windows Vista operating
system, it’s never had any issues, until 2 nights ago I installed McAfee Internet Security (detected incompatible files and will remove) pc now only boots up to a black screen with a mouse cursor, it will show the windows logo and a hash symbol floating around
the screen. Now 2 weeks ago I installed the same program on my Dell all in one desk top with Windows 7, the same issue happen but that pc has no screen activity, I tried a back to factory reboot on this one, still black screen.

Hi,
Please install the compatible version of McAfee Internet Security:
http://home.mcafee.com/store/internet-security
if you have startup issue, you can boot into Safe Mode to uninstall the problematic software to go back into Windows.
Alex Zhao
TechNet Community Support

Similar Messages

My laptop L2000 lance Armstrong only boots to a black screen with a cursor.

My laptop only boots to a black screen with a cursor. Can this be because the board numbers may be different then whats on the HD? I swaped a HD from a old and ugly L2000 to a new and shiny looking laptop! dbarselow

Boot from the first of the system discs (by holding down the C key until the welcome screen goes away) and, in Disc Utility, repair privileges. Not just permissions, but privileges. Then reboot at normal. That will probably fix it.

HT1364 after updating my iTunes to version 11,my music no longer plays,do we have a solution? I'm running on windows vista and windows 8

after updating my iTunes to version 11,my music no longer plays,do we have a solution? I'm running on windows vista and windows 8

You might want to post this over in the iTunes Match forum.

Booting Windows 7 in Boot Camp shows a black screen with a blinking cursor

I am trying to restore a DMG image of a Windows 7 Boot Camp partition back to Boot Camp. (I know that I should have used Winclone, but I didn't have that option because the drive was already dying and so I couldn't even access OS X anymore.)
So far, I've gotten to the point where I can start up the computer, hold Option, choose Windows, but then when it boots up, it shows a black screen with a blinking cursor.
I've tried a few things so far to try and fix this, none of which has worked. I have used the Windows 7 install DVD to run `bootrec` and all its possible arguments. I've ran `chkdsk C: /b`. I've also used the "Automatically fix startup problems" button, of course, as well.
Anyone know what else I could try to fix this?

Already tried those steps. Did not work. I finally fixed the problem by using iPartition and running "Write MBR Boot Code" and then renaming the Windows 7 partition and hitting "Go". The latter step causes iPartition to fix any problems that might exist in the partition. After renaming it, I just renamed it back to what it was before. (It was "Windows 7", I renamed to "Windows 7-02", then renamed it back to "Windows 7" afterward.)

Blank black screen with just mouse pointer after logging in windows 8.1

First of all On starting the system, it was taking much longer time than usual.. Then after logging in it showed only a blank black screen with white mouse pointer.. had to force shut down (shut down also took longer time).. on starting went to safe mode and ran extensive system check.. HARD DRIVE SMART CHECK PASSED but HARD DRIVE SHORT DST CHECK FAILED...I have the recovery discs and the notebook is under warranty..

Hi
If your hard drive is failing on short DST test then you will need to contact HP in your local region and arrange with HP a repair ( Hard drive replacement ) . You say your machine is still in Warranty then the cost of shipping and repair will be covered by HP .
Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

I restarted my phone and now I am having problems with it. It will turn on but only goes to the black screen with the droid eye before shutting off again and trying to restart, what can I do to fix that?

I restarted my phone and now I am having problems with it. It will turn on but only goes to the black screen with the droid eye before shutting off again and trying to restart, what can I do to fix that?

I'm sorry to learn that your phone is having problems starting up, marinema08. I'm sorry if this is incorrect, but are you using the original HTC Droid Incredible or a later Droid Incredible model? Please try placing your phone in Safe Mode to see if you are able to move past the Droid eye. http://vz.to/1kdQWVI If you are able to enable Safe Mode, please try deleting any recent applications you have added.
AndreaS_VZW
Follow us on Twitter @VZWSupport

Macbook Pro boot shows black screen with white text cursor

Hello,
I have a MacBook Pro 7,1 MC374xx/A running Mavericks. My box has two internal hard drives in it. One had the Mac OS installed to it, and the other has absolutely nothing on it. I decided to give Boot Camp Assistant a try and chose the hard drive with nothing on it to install Windows on. I also had an external USB DVD drive attached with the Windows 7 installation disc on it.
So, next thing ya know, my Mac reboots and loads a black screen that says "Memory Overload." I take out the external USB drive and restart. Then it said, "No boot devices found." Now for whatever reason, it's just a black screen with a white text cursor.
What the heck happened?
I selected command R and confirmed that I installed Boot Camp on the right hard drive (the drive that did not contain my Mac OS). Then, I completely erased everything from the drive with Boot Camp on it. But still..black screen with white text cursor.
I have no Time Machine backups available so I'm forced to reinstall the OS. Any idea why this happened? It seems I must have attempted to install Boot Camp improperly. Any ideas or instructions on what to do now or how to install Boot Camp successfully on the Macbook Pro I own?
Earnestly,
Speck

Boot Camp- Windows installation boots to black screen with blinking cursor.

Hello, I can't turn my iphone 4s on, it just broke down and now there's just the black screen with the apple logo on it. So I connected it to itunes and tried to restore it, but than always the errors 1603

Hello, I can't turn my iphone 4s on, it just broke down and now there's just the black screen with the apple logo on it. So I connected it to itunes and tried to restore it, but than always the errors 1603 & 1611 appeared! please help me!!

You may have a faulty USB cable. Try another.
Make sure you are following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
Disconnect the USB cable from the iPhone, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
Use iTunes to restore the iPhone.
If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Select the device in iTunes and choose "restore from backup".
If you still can't get it to work, you have done all you can and only Apple will be able to help.

I was downloading an app and it wasnt downloadnig so i turned my ipod off and now its a just a black screen with the the loading circle. Its been like that for 10 hours. How do i get back to my home screen?

I was downloading an app and it wasnt downloadnig so i turned my ipod off and now its a just a black screen with the the loading circle. Its been like that for 10 hours. How do i get back to my home screen? or how do i get the litle loading circle to go away.. it wont even load into itunes

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I jailbreaked my iPhone 5 and now i don't want the jailbreak any more so i restored the iPhone without iTunes an now i don't wad then it turned itf off and now its stuck on the black screen with the loading sign. So please how can i turn my phone on again

I jailbreaked my iPhone 5 and now i don't want the jailbreak any more so i restored the iphone without iTunes and then it turned it self off and now its stuck on the black screen with the loading sign. So please how can i turn my iPhone on again?

I figured it out by pressing the home button and the off button but when i turn my phone on again it's not restored. And when i try to restore it with iTunes it has to update but i can't update my phone because it's jailbreaked but if i can't update it, it won't restore the phone.

Windows Mobile Device Center fails to open on Windows Vista and Windows 7 machines

Hello,
Our domain based machines cannot open Windows Mobile Device Center (Windows 7 and Windows Vista). You click the application and nothing happens. There are no errors in the Event Viewer that relate. In Task Manager I do NOt see any processes that look related
to Windows Mobile Device Center. Our Group Policy Objects are very lean and limited, and we do not have any policies that specify how Windows Mobile Device Center should behave. The only GPO that I could think would interfere with this is to prevent malware
and viruses, we have disabled Autoplay on removable devices.
Any assistance would be greatly appreciated.
thanks!

Hello,
Our domain based machines cannot open Windows Mobile Device Center (Windows 7 and Windows Vista). You click the application and nothing happens. There are no errors in the Event Viewer that relate. In Task Manager I do NOt see any processes that look related
to Windows Mobile Device Center. Our Group Policy Objects are very lean and limited, and we do not have any policies that specify how Windows Mobile Device Center should behave. The only GPO that I could think would interfere with this is to prevent malware
and viruses, we have disabled Autoplay on removable devices.
Any assistance would be greatly appreciated.
thanks!
I too am experiencing this issue, as well as an unrelated machine that is not on our domain that is having exactly the same problem.
Any thoughts?

Jre8 is not installing in Windows Vista and Windows 8.

Hai,
When I have tried to install jre8 (latest release) in Windows Vista and Windows8, it was not installed and shown the message "Installation Failed" at the end.
Can anyone suggest me How to install jre8 in Windows Vista and Windows8.
Thanks & Regards,
Gowrisankar C.

Try the instructions on this page. They were written at the time of Java 6 but still apply to 7 and 8
Error: The wizard was interrupted before Java(TM) 6 update could be completely installed.
Once you run the MS tool, please install using the offline installer from:
https://www.java.com/en/download/manual.jsp
-Roger

Windows 7 partition won't boot, hangs on black screen / blinking cursor

Hi all,
I just installed windows 7 home premium x64 on a new 100gb partition I made first with bootcamp assistant and then simply with disk utility the second time. I can't get windows to load however, it just sits forever at the black screen with blinking cursor at top left.
I have tried the Bootrec.exe /Fixmbr
bootrec.exe /Fix boot
Bootrec.exe /rebuildbcd
fix that is floating around to no avail. The rebuildbcd command yields 0 copies of windows installed but still ends successfully.
i have spent the majority of my day trying to get this to work and have no leads left anymore. Please help!

I HAVE SOLVED MY PROBLEM! Windows is running excellently on my Bootcamp partition.
Taking a few steps back: I used Bootcamp to remove the disk utility partition, then remade it also using boot camp assistant. Ran the windows install, and this time instead of hanging endlessly on black or going back to step 1 after restarting, the install went all the way. I had to restart once when the computer hung on "starting windows" but it got back on track right after this.
I think I must've fudged something with Disk utility before.
Thank you so much for your help!

My MacBook Pro just turned itself off while installing Windows 7. It has now got a black screen with a white flashing bar in the top left corner...what can I do?

I was just installing windows 7 onto my MacBook Pro. I selected to have 200GB for Windows and the rest leave for Mac.
I clicked install and the bar filled up as it should do. However, once the install had completed, my MacBook turned itself off. I assumed this was normal. Now, my MacBook has a black screen with a white flashing underscore in the top left corner.
What is wrong and what should I do?

Hold down the Option key when starting up then on the sceen that comes up select Mac OS X to boot from.
The Win 7 install didn't go well and is hung in some way. You should use boot camp assistant to remove the win partition and start over.
Make sure you are using a Retail version of Win 7. A Branded OEM version, like ones from Dell and HP, will NOT work to install Windows 7 on your Mac.

My macbook pro keeps getting stuck on a black screen with a visible cursor, why is this happening and how do i fix this?

I have a mid-2009 13" Macbook Pro running OS X 10.9.4 and I've been noticing a problem lately (I think it used to happen before too but not as often as now). My screen will sometimes go black, and my cursor remains visible. It will stay like this, regardless of button mashing or trackpad tapping and clicking. It usually doesn't stay for too long but the other day it was staying like that for a good 5 minutes before switching back to the password-enter screen. It happens sometimes when the computer goes to sleep but sometimes it suddenly happens in the middle of use, stopping whatever I'm doing and locking me out for a few minutes. I want to know why this happens and how to prevent it from happening (or perhaps there just needs to be a patch?). What is particularly strange is that my girlfriend just bought a brand new Macbook Air and she already has the same exact problem as me.

Blank (lighted, but black) screen with cursor at bootup
[SOLVED] - Macbook Air Sleep/Wake problem
Dark screen on start-up can only see curser

Windows Vista and Windows 7 Only Boots to a black screen with a mouse cursor

Similar Messages

Maybe you are looking for