Windows Vista and Windows 7 random WSAECONNRESET

Good day, we have this serious problems with every single pc with Vista or 7 (no problems at all with XP): if the user stops working on the SAPGUI for a few seconds, the client crashes with this error...
ALP: connection to partner '217.172.30.1:3299' broken
WSAECONNRESET: Connection reset by peer
Component: NI (network interface)
Release: 720
Version: 40
Module: nixxi.cpp
Line: 4970
Method: NiRead: P=217.172.30.1:3299; L=10.0.0.31:60899
Return Code: -6
System Call: recv
Error No: 10054
Error Text: WSAECONNRESET: Connection reset by peer
Counter: 1
It seems like some sort of timeout or keepalive related problem, and it occurs only on computers with Vista or 7 (actually EVERY computer with Vista or 7).
I already disabled windows firewall, the antivirus, UAC, and modified the registry as per OSS Notes 26086, 155147 and 413330. I tried both with 7.10 and 7.20 versions of the GUI, with latest patch levels. I tried with fixed and dynamic IPs. But nothing seems to work... I'm going mad... any ideas?

Hello,
try to change the energy options of windows 7. I had a similar problem and this was solved after I stopped my system from energy saving.
Now it will not turn off the network card and my connection to sap will still work.

Similar Messages

Error message with Vista and 7.2: Windows-No Disk Exception Processing Mess

I just got a new Dell computer with Windows Vista and I am trying to put iTunes on it. I can install it fine from the original CD, and then I am prompted to update it to 7.2. After updating, this is the message that I get: Windows-No Disk, Exception Processing Message 0xc0000013 Parameters 0x7620023C 0c847CDB4C 0x7620023C (Cancel Try Again Continue). If I click on any button countless times, iTunes does open up but then I get the blue screen dump message. I have installed and uninstalled it many different times and have tried any of the additional updates/patches with no effect. I did not see this message anywhere else in the forum, anyone able to help?

Unexplained Crashes, lock-ups, Failure to boot and boot-looping in Vista and XP and MAC OS-X.
Have a USB2 external hard drive hooked up to your system? A number of these devices are starting to show up as the cause of the problems listed above. The cause has been linked to drives that were manufactured a year or more ago. Note I said manufactured not purchased. The cause is poor USB 2.0 specifications that the drive case manufactures followed which has deteriorated with age causing the above failures. If this happens to you try disconnecting your external drive and see if your problem goes away. A couple of multifunction printers have also been the cause of similar problems but most of these have higher visibility on internet search engines than the external hard drives.
Sorry, no KB article link. The above is from my reseller, who deals in imaging workstations exclusively.
Hunt

ThinkVantage Active Protection for Windows XP, Vista, and 7 missing from driver matrix

Recently, while checking the Software link: http://support.lenovo.com/ca/en/documents/ht037696
I noticed:
Active Protection System
Like an airbag's sensor, it can detect sudden changes in motion and temporarily stop the hard drive to help protect your valuable data from some crashes that could occur due to everyday notebook accidents.
Windows 8 (32-bit), 7 (32-bit), Vista (32-bit), XP, 2000
12 Mar 2014
v1.79.0.3
Windows 8 (64-bit), 7 (64-bit), Vista (64-bit)
09 Mar 2014
v1.79.0.3
If you try to follow the links to the ThinkVantage Active Protection System, you are presented with a document labeled: ThinkVantage Active Protection System for Windows 8 (32-bit) - Laptop or a document labeled: ThinkVantage Active Protection System for Windows 8.1 (64-bit) – Notebook
No reference to Windows XP, VISTA or Windows 7 in the current version of the documents, yet the text file pointed to by the download links states that this driver still supports all the older ThinkPads and is applicable to Windows 7 and VISTA. The text file does say that Windows XP support has been withdrawn with this release, and that XP users should use the previous version. It does not, however, provide a link to any document or mechanism where an XP user can obtain the previous driver.
So, is the document correct, or is the text file correct?
Where is the current driver for VISTA and Windows 7?
When I went to the support sites to see the supporting documents there, I discovered that the ThinkVantage Active Protection entries were gone from the R61, R500 and T500 driver matrices. The only reference I could find to the ThinkVantage Active Protection System was in the above mentioned SOFTWARE link.
ThinkPad R61 8932-CTO T8300 2.40 Ghz 3GB RAM Win XP
ThinkPad R500 2714-CTO P8600 2.40 Ghz 3GB RAM Win XP; Two ThinkPad R500's 2714-CTO T9600 2.80 Ghz 4GB RAM Win 7
ThinkPad T500 2241-DB9 T9600 2.80 Ghz 4GB RAM Win 7
ThinkCenter A63 5237-CTO 3GB Ram Win XP; A21m and a pair of 380XD's

Still no change to the driver matrices. ThinkVantage Active Protection is still missing. There has been a change in the web site, as follows:
Active Protection System
Like an airbag's sensor, it can detect sudden changes in motion and temporarily stop the hard drive to help protect your valuable data from some crashes that could occur due to everyday notebook accidents.
Windows 8.1 (32-bit)
27 Jan 2015
v1.80.3.0
Windows 8.1 (64-bit)
27 Jan 2015
v1.80.3.0
Windows 8 (32-bit)
27 Jan 2015
v1.80.3.0
Windows 8 (64-bit)
27 Jan 2015
v1.80.3.0
Windows 7 (32-bit)
27 Jan 2015
v1.80.3.0
Windows 7 (64-bit)
27 Jan 2015
v1.80.3.0
Windows Vista (32-bit)
27 Jan 2015
v1.80.3.0
Windows Vista (64-bit)
27 Jan 2015
v1.80.3.0
So now there are numerous separate entries, but none of them claim to support any 'legacy' machines. Most of the above entries point to the same driver (at present). The puzzling aspect to all this is that if you read the text documents that accompany most of the above driver packages, you will note that the text document claims that the driver supports quite a number of legacy machines. That information just never made it to the web page.
So do I manually update a driver because the text document says it is applicable to my legacy R500, or 'believe' the web page which states that only some current models are supported, but not the R500, T500 or R61.
Very inconsistant and highly unprofessional.
ThinkPad R61 8932-CTO T8300 2.40 Ghz 3GB RAM Win XP
ThinkPad R500 2714-CTO P8600 2.40 Ghz 3GB RAM Win XP; Two ThinkPad R500's 2714-CTO T9600 2.80 Ghz 4GB RAM Win 7
ThinkPad T500 2241-DB9 T9600 2.80 Ghz 4GB RAM Win 7
ThinkCenter A63 5237-CTO 3GB Ram Win XP; A21m and a pair of 380XD's

Problem with Java and Windows (Mainly Vista and UAC)

Hi all,
I am having a problem with a program that I've devoloped. The program itself is packaged as a jar and I plan to deploy it across multiple platforms eventually however right now i am only concerned about windows based systems. I have made an installer for a windows baised systems using NSIS to install the software files. I made the installer as I need several java packages to be installed so the program would work (JAI, J3D, JAI ImageIO) and I also require the program to have fileassociations on windows.
I know that this is not what java is about, however the majority of the users will be on windows baised systems so I've decided that OS specific installers is the best option.
During the process I have noticed that there are several key problem with java for this type of application!
The first issue that I have come across is getting file associations to work on java. As a .jar is not an excutable it is not possible to directly associate a filetype with it in java so to overcome this I currently run the program from a .bat files and also the program requires large memory so this also allows me to run the program with -xmx. The batch file that I use is :
<code>
cd PATH TO PROGRAM
start javaw -Dsun.java2d.noddraw=true -Xmn100M -Xms500M -Xmx1000M -jar "PATH TO PROGRAM\program.jar" %1 -vram 134217728
pause;
</code>
Ok so all this appears to work fine and allows windows to have file associations and start the program and thats all works perfectly but this is a non-ideal solution. Has anyone got any advice on improving this?
The next problem that I have appears to be a problem with Vista and UAC (user access control). When a user installs the program and installs the program into the program files directory I found that the program did not work and kept saying that I did not have access to the files in the current directory. This is a problem as I read and write settings files during program execution.
On a Vista system UAC prevents file write operations into the Program Files directory unless the program has requested elevated status even if the user is a full administrator. The probem is that there appears to be no real way to achieve this under java that I'm aware of...
Has anyone else had this probem and has a suitable solution?
Any advice on these issues would realy be appricated.
Regards
Joey

Ok so i've kinda found a solution, its not ideal but its very good. I found this program called Elevate
A link to the site I got it was
http://www.wintellect.com/cs/blogs/jrobbins/archive/2007/03/27/elevate-a-process-at-the-command-line-in-vista.aspx
This program allows you start java with a UAC dialog for high access using
Elevate java -jar myjar.jar
This then allows you to have full access using java... I guess it could be dangerous but it does the job.

A Troubleshooting Guide for Windows Vista and iTunes 8 - user supported

ITunes 8 and Windows Vista can be an explosive combination. Having helped to troubleshoot some problems for people, I decide to consolidate my information all down to one post. The information comes from various sources, and I will try to annotate where it came from. Please let’s keep this a solutions listing post. So people can come to it when they have a problem and easily find a solution.
*ITunes will not install:*
ITunes will sometimes not install or the installation will hang up under Vista. First I will give some generalized steps to take in order of priority, and then get into some specifics.
General
*1. Turn off your Anti-Virus Software.* Some A/V software will prevent the installer from accessing the Windows System Files causing the install to Bork.
*2. Uninstall third-party Audio-Video Codecs.* Installing iTunes also installs Quicktime which installs the necessary codecs to play its supported files. Some codec packs, such as DivX and XviD have the ability to read these files, and their method of decoding these files can cause conflicts with the Quicktime installation. Even third-party CD Burning (Roxio, Nero, and the like) software can cause this problem. Once iTunes is installed, you can reinstall these codecs without any ill effects.
*3. Disable Windows Defender.* Windows Defender is a resident A/V type program native to Windows Vista. It can also sometimes cause conflicts during installation. To disable it, go to the Windows Defender tab in your Control Panel, and chose disable in the dialogue box.
Specific
*1. When I install iTunes, the installation stops and I get error message 2738.* This error message means that the Visual Basic Script is not being installed properly or it could be disabled. To fix this we need to re-initialize the Visual Basic Script server. Do the following:
In the search panel of the start bar, type cmd.exe.
When the search results are listed, right click on cmd.exe and select run as administrator.
Type in the following at the command prompt: regsvr32 vbscript.dll and hit enter.
Run the iTunes install program again.
*2. ITunes installed properly, but now I am stuck in a reboot loop.*
This behaviour is a known problem to Apple and they are working on it. What is happening, when you run the program, it is involking a repair check of your installation. Beaconfield came up with a work around to use until Apple patches the software.
“Navigate to C:\Program Files\iTunes\ and right click on iTunes.exe then select Sent To > Desktop. This will create a new icon that should load iTunes just fine.”
I know there are more issues out there, but these seem to be the most common. If anyone has anymore solutions, please add them to this post. Like I said initially, I would like this post to be an easy reference for troubleshooting.
Thanks again,
linesma
Message was edited by: linesma

Ok, so I saved my Windows Media Player playlist as M3U files and imported them into iTunes. Wow! What a complete mess that made of my library.
All songs that were on the playlists (hundreds of songs) were duplicated in my iTunes library. iTunes would show two entries for each song. When I right clicked and choose 'Show in Windows Explorer' both entries point to the same song, it just shows up twice in iTunes.
I cleared my iTunes library file and am starting over. I'm thinking about just going back to Windows Media Player. I've been listening to music off my Blackberry and it's really been fine. Just seemed a shame that my iPod was sitting in a drawer because of all the issues I'm having with iTunes and Vista.
The original problem I had months ago was that iTunes crashed on Vista and lost all my Playlists. I was so upset I put all my music on my SD card on my Blackberry, because Windows Media Player makes it so easy to back up your playlists. They are saved as files and can be included in any automatic backups (I have scheduled backups to another hard drive)
I thought with this new version of iTunes I could at least export the playlists to files so they can be backed up, I just don't know if I can face re-creating the playlists in iTunes.

Need Help - Windows Vista and Latest Flash Player

Have Windows Vista and Adobe for viewing video. Just recently I was unable to
view the videos. Pop-up showed that I needed to update to the Flash Player 11. I down loaded
as instructed and was advised that download was successful but still can't view the videos
since the same sign shows up. Have tried to see what I'm missing but without much luck.

What is your browser? If IE:
http://forums.adobe.com/thread/885448
http://forums.adobe.com/thread/867968

HT202213 I'm trying to set up "Home sharing" but i can not get into my old computer because of a virus. The old has Vista and an older version of iTunes. The new has Windows 7. Also this is my sons computer however I have made a new user account for me. H

I Have 2 issues;
1. I can't transfer my iTunes library from my old computer which I can't get into due to a virus. I'm trying to transfer my iTunes folder to my sons computer in which I now have a user account. Old is Vista and new is Windows 7. Therefore home sharing is impossible, right? Wrong?
2. I found my purchases from iTunes on my iPhone 4S. I can't seem to download them. There is no button to tap "download". Also, I'm unable to sync to iTunes because my phones default is to sync to my old computer which will not open!

Contact Apple customer support, they can reset your authorizations.
http://www.apple.com/contact

I am running Vista and Windows Mail, I can not open PDF files when in Windows Mail, I must save to Desktop first, this has changes recently and I do not know why or how to fix

I am running Vista and Windows Mail, I can not open PDF files when in Windows Mail, I must save to Desktop first, this has changes recently and I do not know why or how to fix.
Why after 6 year's this has changed?
I would like to open PDF's straight from Window Mail.

Good day Jeff.
I am running most current Adobe Reader X.
Tks Mark

I use Windows Vista and Microsoft Outlook. After migrating to iCloud, the calendar of iCloud tranferred only part of my past Calendar items to the folder iCloud Calendar in my Outlook. How can I transfer all the entries?

I use Windows Vista and Microsoft Outlook. After migrating to iCloud, the calendar of iCloud tranferred only part of my past Calendar items to the folder iCloud Calendar in my Outlook. How can I transfer all the entries? In iCloud's site all are there.

If the calendar is on iCoud.com, all you would need to do to get it on your phone is go to Settings>iCloud on your phone, sign into your iCoud account and turn Calendars on. The iCloud calendars will then download to your phone.

Windows Vista and Itunes 7.1

so, 7.1 was supposed to be the cure all for the windows vista problem, well...i was using the earlier version w/the patch for vista and life was grand...i upgraded to 7.1 yesterday and now every time i launch itunes the program freezes and eventually locks up my whole computer and i have to restart my computer causing all sorts of havoc that is not needed. can i download the older version anywhere? does anyone have a solution to the problem? my ipod wont even open itunes when i plug it in now...i'm so frustrated and have no clue what to do. This whole mess is just driving me insane. Please someone help!!!!!!

Do you also have the patch for it? The only way version 6 works is with that patch they posted not long ago. I have MSN messenger, i am [email protected]
thanks!

How can I get autoplay to work again? ipod touch 5th gen, ios7.1.1, windows vista and 7

I've had this ipod for almost a year now and a few months ago my autoplay suddenly stopped working on both my laptop and my desktop. Laptop runs Vista (and is where my ipod is synced) and the desktop is Windoes 7. Since it still syncs fine I've been ignoring the problem but now i've got too many photos and need to make room. I've tied uploading through the dropbox app but there's a LOT of photos so it takes too long and the app crashes often. Even when autoplay would sometimes not work, the ipod would still show up in My Computer. Now there's noting. My computer isn't even recognizing it as a device. Only iTunes still notices it. I've gone through the support FAQ already but none of it works/applies. My ipod recieves a charge and the "Do you wan't to trust this computer?" dalouge shows up when it's unlocked. It sees the competer at the least.
Deleting photos is NOT an option since they have no backup. This also means I'm trying to avoid reseting to factory settings UNLESS the backup of my ipod includes all my photos. I'm not sure if it does or not and there's thousands of photos at risk so I' not making that move unless I know for sure that they're safe.
I would really appreciate any advice anyone has.

Try on another computer. Just do not sync with that computer.
You can also try:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

My computer has had a new operating system put on Windows 7 but I did not de-authorise my old computer which was Windows Vista and now I cannot sync my Ipod Classic as it keeps saying I have exceeded my maximum of 5 computers being authorised.

My computer has had a new operating system put on (Windows 7) but I did not de-authorise my old computer which was Windows Vista and now I cannot sync my Ipod Classic as it keeps saying I have exceeded my maximum of 5 computers being authororized. I tried doing this via my account in the Itunes Store but it still won't allow me to do this. Can anyone help?

Contact Apple customer support, they can reset your authorizations.
http://www.apple.com/contact

TS1814 I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!

I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Try this:
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Windows Vista and BPS0 - Strange issue

I just got a new HP Pavilion laptop with Vista and I have a strange issue:
All transactions work (SE80, RSA1, ...) except BPS0. The moment I enter TCode BPS0, I get completely logged out (all sessions). No error messages, no dumps. It just logs me out silently.
Is this happening only to me?
I use Windows Vista Home Premium edition and AMD Turion processor 64x2.
Any suggestions appreciated.
Thanks

i too recently bought hp pavillion and my problem is i cant able to logon it gives me error of 10054, connection broken, can you tell me which things restrict me to log on. any settings are there to be performed. do mail me, i have been trying from 2 week my id is [email protected]

Windows Vista and Photoshop CS2 Compatibility?

I am considering the purchase of a new computer. I have Photoshop CS2, and I am debating whether to get Windows Vista or Windows XP Pro. I have read in the database about Vista and CS2, "Installs and runs with minimal known issues." But it also states under Support for Windows Vista, "not officially." So I am wondering whether anyone has PSCS2 running under Vista, and what kinds of problems you've encountered? Thank you.

I have come across a severe Photoshop CS2 incompatibility with Vista.
One of my printers is an Epson Stylus R310, which prints on both paper and disc. While this model has been on the market for a number of years, many people are still using it, especially those who, like me, have added a continuous-flow ink system to it.
Epson appears to have sat back meekly and allowed Microsoft, whose programming limitations know no bounds, to produce a Vista 'driver' for the R310. Epson even proudly announces on its various international sites that the driver is 'In-box'.
This so-called driver is so poor that Epson has had to release a PDF that shows how to fool the printer into printing to disc when using Epson's own CD Print software under Vista. The Epson XP driver automatically switches the printer dialogue to CD mode, but with the Vista CD workaround the paper mode is retained on screen and it is not until the printer reacts in CD configuration that a user knows that the workaround has worked.
When it comes to Photoshop no workaround seems possible. Print Preview just doesn't work as it does under XP. It is not possible to switch printers, so the target printer has to be made the default so that a preview appears. Otherwise, the user is stuck with the default. In my case, I have used the Photoshop preview box under XP to switch from my default A4/A3 mono laser if I want to use the R310 or my HP 1220. Epson Support's reaction to this situation is that it is up to Photoshop to change.
Problems such as these with the R310 under Vista no doubt apply to many other printers whose Vista drivers carry the dreaded '(M)' in their name.
This leads to a question of my own. I am wondering whether CS3 has tackled this problem of using truncated Microsoft Vista printer drivers with Photoshop. Can anyone enlighten me?

Windows Vista and Windows 7 random WSAECONNRESET

Similar Messages

Maybe you are looking for