Windows Vista Audio Driver Problem

My Windows Vista Drivers that I got for my MacBook Pro from the installation disk have bad audio drivers. The sound on the speakers is too low, and the microphone won't even work. When I talk into the microphone while under Sound Properties in the Recording tab, it shows that the microphone is picking up sound. However, in Ventrilo, and Windows Sound Recorder, there is no sound from my microphone.
I'm using Bootcamp 2.1. When will this problem be fixed? Will Apple release a new bootcamp version to fix this problem?? This is very important to me.
If anyone has fixed this problem, please tell me how you did it.
BTW, the audio device is called "Cirrus Logic CS4206A (AB75)"

Welcome. Make yourself at home.
http://discussions.apple.com/thread.jspa?threadID=2037093&tstart=30

Similar Messages

Installing windows vista load driver problem

I am trying to load Windows Vista Ultimate SP1 32. I follow the bootcamp assistant instructions. I select "Disk 0 Partition 3 BOOTCAMP" as instructed but the "Next" button will not function. I can tab or select between drives, Refresh and Load Driver but cannot get to Next. The Bootcamp instructions say to load drivers after Windows is installed but I can't get Windows installed?? What am I doing wrong?
Thanks,
Bill

Found my own problem. Had to click on drive options advanced and format. That still didn't work because the disk was too small. Increased disk size and successfully completed install.

Windows Vista Bootcamp Driver Problems

Hello,
I have installed Windows Vista 32bit through Bootcamp, and the installation went through fine. I inserted my iMac "Mac OS X Install DVD" that came with my imac i bought in august. I tryed to run the program, but it said it was only availible for Windows 7. I could not acsess the internet through Wifi on Windows.
Could anyone give me instructions on how i can get the Windows Vista Drivers without the disk? the drivers, that bootcamp prompts me to install onto a usb, are also for windows 7 only. (ive already tryed this)
Thanks!

The hatter,
While running Vista, I navigate to Bootcamp setup.exe (my 10.6.6 disc is in the drive), it quits mid-launch and tells me Windows 7 is required. But Bootcamp user's manual says Vista is ok.
I'm using an 21.5" iMac with 10.6.8. I installed Windows Vista Home Basic 32 bit via bootcamp assistant. Vista is running fine but i can't surf the net. Error msgs say "network adaptor not found." Other forums lead me to believe it is a matter of bootcamp installing the proper drivers so vista can recognize my network hardware. But I can't even run bootcamp in Vista from my snow leopard CD b/c it quits and requires Windows 7.
My firmware is up to date as I checked it manually. According to my boot rom version, I need firmware update 1.9. After downloading and launching, msg tells me it is not compatible with my system. Please advise.

Trying to connect my replacement Iphone 3GS to my windows 7 laptop but it is not recognised at all, my ipod can connect no problem, my iphone can connect to my windows vista computer no problem. Any ideas?

Trying to connect my replacement Iphone 3GS to my windows 7 laptop but it is not recognised at all, my ipod can connect no problem, my iphone can connect to my windows vista computer no problem. Any ideas?

More info,
I have bootcamp with Windows 7 installed, do I need to run some "Driver compatibility checker" after the Windows 7install?
if so what is the name of it?
thanks

How do I get Vista to go back to the Windows' Vista generic driver after an Extigy upgrade fiasco

Hello all. First, I'm glad to have the opportunity to be a part of this group. I didn't know it even existed, but here I am...so, let me know what you think.
I am a new Windows Vista Ultimate OS owner, and thus far, I'm absolutely thrilled with the advances in video render and compression speeds. However, one of the auto-update features tried to update my Extigy driver, the one that apparently loaded with the original install of Windows Vista, and the update didn't work...go figure. So, now there is no way to use the system restore as it doesn't recognize that there was a change, and I can't get the Extigy to make a peep.
How do I go bakc to the Windows Vista generic driver so I can listem to my voice overs agan?Thanks so much folks... Michael

Go to the device manager, and select the extigy, then properties, then in the driver tab, the 3rd button down

U401 touch windows 8 audio driver unable to install error could not find divice for this driver

u401 touch windows 8 audio driver unable to 0wau05w8.exe install error could not find device for this driver
kindly advise

hi karthi2lenovo,
Welcome to the Forums.
If the conexant audio drivers from the lenovo website doesn't detect the device, can you try to:
1. Open Device Manager (press Winkey+R > type devmgmt.msc)
2. On the device manager, open Sound, video, and game controllers and Other Devices then check the status (if there's a yellow exclamation mark, error codes, etc.)
3. As an alternative, try this conexant driver from station-drivers:
Conexant High Definition Smart Audio
Version 8.64.59.52 (Win8)
Let me know your findings,
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

V5-552P Windows 10 audio driver got rid of Dolby Home Theater

A few days ago I upgraded my laptop to Windows 10 and everything worked fine, including Dolby Home Theater. However, today I decided to install the Windows 10 audio drivers for my laptop on Acer's website just to make sure they were fully updated, but now Dolby Home Theater is completely gone from my system. Why does the Windows 10 audio driver get rid of Dolby Home Theater and how can I get it back?

try to install this drivers:http://station-drivers.com/index.php/downloads/func-startdown/1591/ 100% trustable websitedouble click on exe, on the extracted folder look for setup.exe file and run it.

Cloning Windows Vista Hard Drive

I have a Mac Pro.
I have Windows Vista installed on a separate internal hard drive.
I want to make a bootable clone of this Windows Vista hard drive onto another separate internal hard drive.
Is there a program or utility that allows this.
I have tried Norotn Ghost and it is not "reliable".
Thanks

You can try Winclone by downloading it from [HERE|http://www.twocanoes.com/winclone>. Please do a search on Winclone in the forums so that you get a full idea about it.
Axel F.

IDT Audio Driver Problems on Windows 7

For the past few weeks, I have been dealing with the same audio swings and speaker problems that many other people here have complained of. I am aware of the Driver update for those who have Windows 8 computers, but I have a Windows 7. This computer was bought in last June after my previous HP laptop (which consequently had no issues) needed to be replaced. Restarting the computer fixes it for a few minutes but it always has issues until it inevitably makes it so I am unable to hear anything or play any videos. I have uninstalled, deleted, and reinstalled the IDT driver several times including downloadling directly from the HP website. I have sat and watched as the Beats Audio Settings swing back and forth and watched as Windows Explorer crashes because I attempted to change the volume settings on my keyboard. Most of the time, I can't even restart or shut down my computer anymore, it just stays at a black screen with the power light on until I manually turn it off or the battery dies.
I'm so frustrated with this and even more so at the fact that a fix has been pushed through for Windows 8 users but you're leaving those of us with Windows 7 stuck with unusable laptops. Please tell me how I can resolve this issue or point me to someone who can help me replace my laptop. Thank you.
P.S. I'm not mad at you, just at the situation, I'm sorry for sounding like a jerk.
This question was solved.
View Solution.

Hi,
Please try one of the following methods:
1. Uninstall Audio driver, reboot the machine and install the following driver:
http://ftp.hp.com/pub/softpaq/sp64501-65000/sp64958.exe
2. Uninstall audio driver, reboot the machine during connect to the internet. Wait for around 10mins and check. Install the above driver if it does not come back automatically.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Pavilion dv7-1250en Audio Driver problem for Windows XP SP3 x86

Hi. I have installed Windows XP SP3 in HP Pavilion dv7-1250en and has found all drivers except Audio Driver for Windows XP SP3 32-bit.
Everest found 2 Audio device
1) IDT 92HD71B7 @ Intel 82801IB ICH9 - High Definition Audio Controller (A-3) PCI
2) nVIDIA HDMI @ Intel 82801IB ICH9 - High Definition Audio Controller (A-3) PCI
Please help.
Thanks in advance.

Try sp41693
IDT High-Definition Audio CODEC Driver,
sp41693, vista driver, reported work in XP here
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

IDT High Definition (HD) Audio Driver problem after windows 8.1 update 1.

Hello. I have HP Probook 4730s. After I installed Windows 8.1 update 1 the sound driver stopped working properly. When I want to play some music, video or even system sounds, sound appears after 1-2 minutes. At that time HDD usage is 100% cause of windows audio device graph isolation. I’ve installed that IDT High Definition (HD) Audio Driver from HP’s driver support site, but that’s not working. As I see in device manager driver’s release date is 24.10.2012. I think, it’s too old for Windows 8.1. Can you help me? Is there any other newer version of that sound driver? Also I’m sending two pictures where are HDD usage and driver release date.

Hello GDartsimelia,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that after you installed Windows 8.1 on your notebook computer, the sound driver stopped working properly, and I would be happy to guide you towards a resolution!
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at:
http://h30499.www3.hp.com/t5/Notebook-HP-ProBook-EliteBook/bd-p/bsc-274
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Saound blaster audigy value windows vista 32 bit problem in driver compatibility!!!

i have installed the sb audigy value latest drivers july 9 2007?and it installed clean and then after a few restart it will detect again the standard?pci to pci bridge and sound devices... when i am using?xp this does not happenwhat is wrong with your drivers? i am installing the?drivers?again and again and same thing happen and my settings reverting always to 6 bit 48khz my card is 24 bit 96khz in the first install... and after a few restart?the setting for 24 bit and 96khz?will dissapear and the only available is 6 bit 48khz somtimes not working? kindly help me... plz... all my problem in windows vista 32 bit has been resolve this is the only one remaining...

Graphic drivers for the iMac is a regular question, and there are some tips and answers. I'd have skipped Vista, too much like beta and gone for 7, but you have it now....
Check the end of this thread with tips:
http://discussions.apple.com/thread.jspa?threadID=1866970&tstart=0&messageID=112 87449#11287449
And take a look for other similar threads.

Audio driver problem for Hp dv2 1010au

Dear all, i just started using hp notebook dv2 1010au with windows vista in it, because i have some problem with the way it loading processed that's very slow...
So i was downgrading the operating system with xp, the problem is when the operating system all installed correctly, the audio driver not work.
If anyone has the same problem and have the solution please help me!! it would be very helpfull...thx a lot...
For supplement information, the audio driver i used earlier named sp43569 but after i had installed it, poping out notification said "the hardware detected is not supported by this IDT software package", i've tried searching other alternate but can't find any.
So..please...please...help me..

@arif_erha07
Have you install MS-UAA before Audio driver?
Please make sure MS-UAA has been installed properly
How?
Go to Device Manager under System Devices to see if MS UAA installed properly.
There should be a listing for Microsoft UAA Bus Driver for High Definition Audio.
If not, you should have a PCI with yellow!
Install MS-UAA, find it in XP downgrade guide, here
Try IDT driver from your mode page, here
Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

How do I move my library from Windows Vista hard drive that is now in an external box to a Windows 8 PC?

My old PC operating with Windows Vista failed to reboot, ironically but only coincidentally right after I installed the latest Itunes update a few weeks ago. It would not get past the DOS screen but getting that far I was at least able to conduct a diagnostics. The result was Hard Drive failure "BIOS-HD." I have a new PC with Windows 8 and have installed Itunes there as well. I removed the Hard Drive from the old computer and placed it in an external drive box. Fortunately, I can access everything on that drive including Itunes. How do I move my Itunes Library from my old hard drive in the external box and connected to my new PC, to the hard drive in the new PC? I see all sorts of instructions on line but none for the specific circumstance of the old hard drive in an external box and moving to a new PC with newer operating system (Windows 8). Thanks

Aside from checking here, I also Googled for an answer. Then I faced the problem on the Internet where stuff stays there forever and so I see solutions for previous and maybe obsolete versions of Itunes. I have no way of knowing if the seemingly sound advice was solved in later versions of Itunes. In one case there is a great YouTube video with a guy from Circuit City (now out of business). I found an extensive explanation that made my head explode with all the detail but I did understand enough to see that the solution they precribed has you go onto your new computer and make sure you rename your new hard drive to match the name of the hard drive from your old computer. That way Itunes on the new computer will be able to find it okay. These instructions also tell you to downlaod Itunes software on the new computer first and then move two different folders (I think one has the extension of .itl); one folder with the library and the other has the metadata--to the new computer. Then to confuse things I have seen instructions that also say to just move the files and they don't address the issue with the file names like turringtest said. Most discouraging is that all of the instructions I have talked about, explain what to do without ever addressing my specific situation where the old hard rive used to reside in an old computer and has an Vistas Operating System that apparently failed and caused me to get a new computer in the first place (I guess I could have loaded a new operating system but not sure if that would have wiped out my extensive files...also irrelevant to the discussion }:) Sorry). Thanks for your attempt to help. I appreciate it much.

Windows Vista 32 Bit - Problems with Static Sounds

Hey Guys,
I dled the latest version of iTunes (7.1) and I am hearing static noises over all my mp3s. Recent upgrade to Vista 32 Bit

I'm having the exact same problem. I-Tunes and everything worked fine in XP. After the install Vista 32 bit (clean install) my audio clicks and has static only in I-Tunes playback. It may be related to the Sound Blaster X-Fi audio driver.

Windows Vista Audio Driver Problem

Similar Messages

Maybe you are looking for