Windows vista boot disc won't come out without booting on my macbook

how would i get the boot disc out with out it booting the installer for windows. and i just got this macbook yesterday bexause my other one didn't have a working optical drive it was doa. can some one help me?

yay
i fixed it
get a stak of twist ties that are stil together and put them under the disc in your optical drive and just let it sit and not move it will eject!

Similar Messages

  • How do I eject a CD that won't come out of the optical drive.

    How do I eject a CD that won't come out of the optical drive on a MacBook Pro . I have tried the ejcct key on the keyboard. There is no longer an eject disk on the drop down menus. Any ideas...?

    reboot while holding down the mouse/trackpad button until the disc ejects.

  • IPod Touch 3G in DFU Mode and won't come out

    Hello,
    My daughter's iPod Touch 3G appears to be in DFU mode, but won't come out. The screen is completely black, and when I attach it to the computer, it comes up with the message "iTunes had detected as an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes." When I hit the restore button, I receive the error message "software for this iPhone is not currently available. Make sure you have the latest version of iTunes and try again."
    I've seen this message posted several times in the forum, and I have tried all the troubleshooting tips offered by Apple Support and in the answers to some of the questions. I am a Systems Engineer, so I consider myself pretty technically savvy. These are the steps I have followed so far:
    1) Completey removed and reinstalled iTunes according to the instructions provided by Apple.
    2) Downloaded the firmware for both the 3G and IOS4 from http://www.felixbruns.de/iPod/firmware/ and attempted a manual install - when I do this, I receive the error message, "the iPhone "iPhone" could not be restored because the firmware is incompatible"
    3) Downloaded RecBoot to attempt to exit recovery mode, but it does not appear to be detecting the iPod.
    4) Attempted to exit and re-enter DFU mode several times to no avail.
    5) Called Apple Express Lane and was willing to pay the 1 time phone support charge, however the agent told me that he could not help me, and that I needed to take the iPod into an Apple store (the iPod is 190 days out of warranty).
    My last effort is to try the install from another PC. So, prior to taking the iPod into the store, I was wondering if anyone has had any success other than the steps I have tried above. I'm appreciative for any assistance anyone is able to provide.
    Message was edited by: kander1625

    Check the model number on the back, "A1318" = 3G, "A1288" = 2G. If it truly is a 32GB 3G Touch, then you're going to have a rough time going back to an iOS version earlier than the current release (4.3.1, available from iTunes). The iOS packs you get from the site you mention are not "signed" and you probably won't be able to install them ... I think 2G owners have better luck with those "unofficial" versions.
    So, if you have a 3G, your best bet is to erase (or move) all earlier iOS versions and let iTunes download a fresh copy of 4.3.1 for the iPod -- no need to go to a 3rd party site. If you have a 2G, then the latest version you can install is 4.2.1, which is also available from iTunes. To increase your odds of this working out, you might temporarily disable any AV software and firewall(s).

  • I am able to transfer my photos from my iPone 4s to my PC with Windows Vista but it won't transfer my videos? Does anyone know how to do this?

    I am able to transfer my photos from my iPone 4s to my PC with Windows Vista but it won't transfer my videos? Does anyone know how to do this?

    I have Vista (don't laugh) and my videos are transferred over when I plug in my phone.   They don't open up in Winodws Picture Viewer though.
    They are under my Photos, under the date created by the sync.   Do a search I'm sure you'll find them.

  • Toner won't come out LaserJet Pro 400 MFP M425

    toner won't come out LaserJet Pro 400 MFP M425. It's stuck inside.

    I am sure it is stuck on the right side.  Odds are also that it is an aftermarket toner and not an hp original.  That said it will not be easy to remove.  You will have to do a google search for the service manual.  The right side cover needs to come off and it is not easy since the back, top and control panel need to come off.  Once you have the right side cover off you will see a big while gear behind the metal plate that holds the gear assembly to the right side.  You need to turn that gear by hand a little and it should free up the toner to come out.  When you remove the toner you will see a sort of bell housing metal piece that hangs on the right side of the toner.  That assembly fits down the right side and locks into the mech that turns the toner drum.  If that piece has defect it gets stuck.  Good Luck.  First thing I would try is to unplug the printer, then plug the printer back in and let it come to ready and open the door to see if the toner now comes out.  Sometimes turning the printer off and then back on will turn that gear by itself and free that piece.

  • Jail-broken iPhone 4S won't come out of recovery mode after attempted ios 7 update

    So I've had my jail-broken iPhone for a while and decided to go for the ios 7. After deleting 200 songs, 400 pictures & videos, and countless apps and other useless data to get the necessary free space to upgrade, I was finally able to download it. It went into recovery mode (showed the iTunes logo and the USB cord) shortly afterward. I plugged in my iPhone to my laptop, iTunes came up, but as I tried to restore the phone to upgrade to the ios 7, an error appeared saying the "iPhone software update server could not be contacted or is temporary unavailable". I've tried a LOT of stuff, from simply restarting my laptop to trying DFU mode like 200 times, and it keeps saying the same thing. Now I'm basically phoneless because it won't come out of recovery mode.
    Does this have anything to do with it being jailbroken and not backed up prior to attempting to upgrade? Please help!

    Yes, it is directly related to j'breaking it.  And as such, you will get no further support from Apple and we cannot help you either.  Use an internet search to try to find a solution elsewhere.

  • New Mini - Firewire plug is stuck and won't come out

    Hi,
    This is a virtually new Mac Mini; A firewire plug from my 20" Cinema display is stuck in the firewire port and won't come out. (I'm trying to disassemble this mini to move to another location.)
    I'm trying very hard not to pull too hard because I don't want to damage the firewire port. But I don't know what to do - it's just stuck and won't come out.
    Any ideas? Many Thanks,
    Frank B.

    Well, I finally got it out after fiddling with it, and walking away several times. I had to make sure I didn't damage it, so I approached it very gingerly.
    How did I get it out? It's amazing what actually worked. What worked was grasping ONLY the firewire chord about 1 to 2 inches away from the plug and pulling Only on the chord straight out.
    Doing it this way, it popped out with very little resistance. Strangely, the Apple Cinema Display firewire plug almost seems to click when you plug it in.
    So I immediately tested a generic firewire plug (non-Apple related) and it plugged in and pulled out with no problems or resistance whatsoever.
    "This completes my test of the Apple Cinema Display Firewire plug." (a joke there)

  • Ink black won't come out printing my tax filing.

    I was gonna plan to do tax filing and needed to print out but ink black won't come out... i have to clean cartidige with tissue paper with alcohol... but won't working... black ink appers half plently of more ink inside. What I am going to do with that?
     Please let me know asap! Thank you. 

    Hi @deafchubbbear77,
    Welcome to the HP Forums!
    I'll do my best to help with your Deskjet 3052a not printing black ink
    Please start with the steps within this Fixing Print Quality Problems for the HP Deskjet 3050A (J611) All-in-One Printer Series document.
    If that doesn't seem to do the trick you may want to try cleaning the cartridge contacts, but make sure to just use water. Alcohol will dry out the contacts and may cause further problems in the future.
    If that still doesn't work, that black cartridge may need to be replaced. To see if it's eligible for replacement, contact our technical support team via phone and inquire.
    Let me know how things go for you
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • I've got music on my 4s that I can't get out of my phone. I've deleted it from ITunes and tried to manually and automatically remove (sync) and it won't come out of my phone It's gone from ITunes

    I've got music on my 4s that I can't get out of my phone. I've deleted it from ITunes and tried to manually and automatically remove (sync) and it won't come out of my phone It's gone from ITunes

    Well the iPod is supposed to be synced from YOUR iTunes music library, if you used other means to put music on there then the iPod is going to sync to only what's on your itunes music library when you connect it.
    You need to put the files into itunes.
    Far as your other issues, sounds like the drive is dying.
    Check this support article for assistance
    https://support.apple.com/kb/TS2380
    http://reviews.cnet.com/8301-13727_7-10329819-263.html
    search online for that number.

  • My Ipod touch won't come out of recovery mode or appear on Itunes!!

    My Ipod gen 5 won't come out of recovery mode. When I plug it into the computer, the ipod device won't show up on itunes and I have tried closing it, and it still wont show up on Itunes or get out of recovery mode! Please help me!!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • HT201210 What do I do if my iPhone 4s won't come out of recovery mode?

    My iPhone 4s won't come out of recovery mode. I don't know how to fix it.I have tried holding the home button and power button for 15 seconds. It didn't work. I just need some advice.

    You may need to do this several times http://support.apple.com/kb/ht1808

  • My laptop won't come out of sleep

    I have the Macbook Pro w/ retina display and whenever I go to open it, my laptop won't come out of sleep and I have to hold the power button to turn it off then back on again. I have to do the same thing if I walk away from it for to long and the laptop goes to sleep except this time when I bring it out of slepp it just shows the enter password for user screen but it is frozen. I got my laptop on the 8th of June 2013 so it is practicly brand new. Does anyone know how to fix this problem.

    Brand new out of the box this shouldn't happen. Bring it to an Apple store or AASP.

  • My iMac goes into sleep mode, won't come out until I unplug and replug the computer then hit the power button. Just hitting the power button alone won't restart the iMac.

    My Imac goes into sleep mode but won't come out.  The keyboard/mouse won't rouse it and the power button won't do it either.  I have to unplug the computer, re-plug it in and then hit the power button.  Help?

    I looked around the internet and found an old post that seems to have solved the problem.  I had a relatively new USB port (powered) that I unplugged and, ta da, the problem disappeared.  I'm not sure why this happens (I'm not a tech person) but it seems like this should have been worked out in testing somewhere.

  • Windows Vista Boot Camp - No Audio (sound)

    Hi Guys,
    I just got my father's Macbook Pro he bought last year for christmas, and I was already excited how I could actually have both Mac and Windows on one laptop (as I need Windows for making music in Fl Studio). Now the problem is, that there is no Sound coming out of the MBP when in Windows, and there is the infamous red light coming out of the Headphones Jack. I'll explain everything I did in steps so that you get the idea. So first of all, I started with the Bootcamp Partition and Installation. Since I lost my Mac OS X (or tbh my father lost it   ) I was happy to see that I could actually download the 'support software a.k.a. Drivers' directly before the installation. Well, guess what, It didn't work because the 'support software was not available'. Anyways, I proceeded with the Installation as if I had the CD and Drivers ready. Everything went fine, after booting to Windows I installed Bootcamp and the drivers (Since I found someone posting the .Iso file of the contents of the MAC OS X CD I lost, so I downloaded it.), I was excited to see that every button on the keyboard worked and also the trackpad worked almost flawlessly.Now after the Installation, I did some Windows updates, and then I wanted to listen to some Music, and suddenly I realized that my Sound isn't working! And the Jack started to Glow Red.
    So I went online, in search of the problem. I found various 'fixes' for the problem, such as installing a Cirrus Driver (well that didn't work, as it said that my windows is in Slovak and that's not a supported language... what the ****?), then I tried to install Realtek Drivers - didn't do anything (although I didn't uninstall the old ones, because I wasn't sure how exactly to do that.)... Well I think it might be helpful if I'll just summarize what 'fixes' I tried:
    Update to Boot Camp 3.1 - Didn't work
    Update to Service Pack 1 or later. - Updating to Service Pack 1 and then 2 got rid of the red light, when there is no sound output, as soon as I try to play something it's back on, glowing like a Christmas Tree
    Try to wiggle a toothpick in the headphone jack - amazing fix, isn't it? Well I actually found out that It worked for some people, and since I'm desperate, I tried it... As expected, it didn't work.
    Install Realtek Drivers - as mentioned above, didn't work...
    Install Cirrus Drivers - Slovak Language not 'supported'... right.
    Update Boot Camp to latest update - Didn't Work...
    Install a 32 Bit Version of Windows -  I didn't mention this, I had first a 64 bit version of Windows 7 Installed, and the sound didn't work as well. As there was some problem with the Boot Camp installation, I tried to reinstall to 32 Bit, But used Windows Vista instead, because I heard Windows 7 Is 'not yet  supported' or something..
    Make sure the Speakers are 'preset' as a default device in the Sounds Control Panel -  It Already was preset -.-
    'Rage Plug' the computer and hope for the best...? Yeah.
    Can anyone finally tell me how to fix this, I am desperate, tired, angry and all the other negative emotions you can imagine right no, because I spent hours on this, looking up millions of forums, in which there was no answer for me!!
    Please.
    Thanks.

    Welcome to the Apple Support Communities
    You have to download the drivers. To download them, press X key while your Mac is starting to start into Mac OS X, open Boot Camp Assistant and follow the steps to download them. You will have to burn them onto a DVD or USB drive, so you will be able to install the drivers on Windows. Then, it should work fine.
    If you can't download them in Boot Camp Assistant, download the drivers from this website > http://www.cafe-encounter.net/p682/download-bootcamp-drivers The links are from Apple and that's safe to download and install

  • Windows Vista Boot camp will not show video card

    Hello
    Im running a macbook pro in windows vista 32 bit boot camp mode. Every thing works fine except that the device manager only shows the VGA adapter and not the Nvidia Geforce 8600M GT I have equiped. I cant find any drivers for this card. Is there any way to get Vista to use it properly?
    Thanks

    This forum is for troubleshooting issues related to the usage of Mac OS X, not Boot Camp or Windows. Post your question in the Boot Camp forums:
    http://discussions.apple.com/category.jspa?categoryID=237

Maybe you are looking for

  • Events in month view that span multiple days

    Hi, When I enter an event in iCal with a start time at lets say day 1 and an end time at day 3 it shows up as a multiday event in week view, but when I switch to month view it only shows the event and start time at day 1 and not the event at day 2 or

  • Movie out firewire

    Hi I have a ADVC110 attached via firewire. But the movie does not appear when I check the external checkbox. I think it is in the wrong format, it plays fine inside of logic but not out firewire. What settings in Quicktime 7 do I need to choose to co

  • Outgoing email sits in Drafts since 10.4.6 update

    Hi All Since upgrading to 10.4.6 (and I'm not saying that this is necessarily the cause here), emails I send using Mail.app go to the sent box as normal, but also appear in the Drafts folder a short time after sending. I have been able to confirm in

  • Oracle HRMS Demostration materials

    Hi all How have demonstration material about hrms and payroll???. Will be great to get some advices. Thanks in advance

  • No response from Web Server

    Hello, I have installed Oracle9i application server Rel 2,9i Infrastructure & oracle 8i DB on Win 2000 server.The installation was successful. When I access the browser with http://<hostname>:7777 it works fine, it shows HTTP server welcome page. Now