Windows Vista conflicting with Clean Access?

When I try to log into Clean Access to use the internet, it gives me an error message saying that in order to fulfill all of my requirements and get into the system, I need to download windows defender. But Windows defender comes with Windows Vista, which is what I have...So when I try to download Windows Defender and install it, it gives me a popup saying that I already have it on my comnputer and that I don't need to download it. Any ideas? Anybody? Please? Am I even in the right place for this kind of question?

If you using Windows Vista,You already have windows defender. Ensure the version of the defender because if Windows Defender informed you that an update is available, you are running an older version.
Below are Windows Vista Supported Antispyware Product as of the latest release of the Cisco Clean Access software.
Product version - 1.x
AS Checks Supported
(Minimum Agent Version Needed) are:
Installation - (4.0.5.0)
Spyware Definition - (4.0.5.0)

Similar Messages

Does anybody know to authorize a windows vista computer with the new itunes?

does anybody know to authorize a windows vista computer with the new itunes?

Authorization and Deauthorization
Macs: iTunes Store- About authorization and deauthorization.
Windows: How to Authorize or Deauthorize iTunes | PCWorld.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it.
More On De-authorizing Computers (contributed by user John Galt)
You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
1. Open iTunes on a computer
2. From the Store menu, select "View my Account..."
3. Sign in with your Apple ID and password.
4. Under "Computer Authorizations" select "De-authorize All".
5. Authorize each computer you still have, as you may require.
You may only do this once per year.
After you "de-authorize all" your authorized computers, re-authorize each one as required.
If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.

Windows Vista Home ( with SP2) constantly reporting that Safari 5.1.2 has crashed ( usual Windows prompt to close program) yet Safari is still running although loading pages slowly. Any one seen this recently ( note no recent install or changes to Windows

Windows Vista Home ( with SP2) constantly reporting that Safari 5.1.2 has crashed ( usual Windows prompt to close program) yet Safari is still running although loading pages slowly. Any one seen this recently ( note no recent install or changes to Windows

Windows reports that Safari stopped working . Windows Task Manager shows webkit2webprocess.exe process still running even after I respond to Windows prompt and close Safari ( Safari continues running after this action )

Will Windows Vista work with Bootcamp 3.0.4 (325)?

Will Windows Vista work with Bootcamp 3.0.4 (325)? the documentation says that I need a Win 7 installation disc. I don't want windows 7; I want Windows Vista.
How do I install the drivers?

You don't provide any info regarding your computer but Vista is not supported by the newer Apple computers: http://support.apple.com/kb/HT4410
You could use a VM like Parallels, Fusion, or VirtualBox to install Vista.

Problem with Clean Access Agent and Windows Updater

I have a problem with a laptop when using Cisco Clean Access Agent. The agent keeps directing the laptop to get updates from the Windows Update site, but when I have connected the laptop via cable, windows updates tells me there are no updates either essential or optional. The laptop is a Sony VIVO VGN-FJ270 running XP Home Edition SP2 and the Clean Access Agent is version 4.0.2.1
Any help is appreciated!!

Verify the allowed hosts in CCA agent.
Try these link:
http://www.cisco.com/en/US/products/ps6128/tsd_products_support_series_home.html
http://www.cisco.com/en/US/products/ps6128/products_qanda_item09186a00803b7a81.shtml

Help with Clean Access Architecture

Hello All,
I wanted to engage some of the NetPros out there about designing our Clean Access architecture. We purchased 4 3140s (2 x CAMs w/ FO, 2 x CASs w/ FO). The goal is to use Clean Access to validate select areas of our head quarters, along with validate users in a remote location.
The HQ part of the design I can understand without issue. It's when we begin to deal with the remote office that I become uncertain about the design. The remote office is MPLS connected to HQ (L3 multi-hop). We want users in the remote office to also be L2 authenticate to the Clean Access cluster at HQ. Across MPLS this does not appear to be straightforward. We'd like to do a L2 deployment, but from what I've read this will require using L2TPv3 at the remote office to "tunnel" the VLANs from HQ to remote and vice-versa. My fear is that now the default gateway for the remote clients is the HQ Clean Access cluster. Therefore... all traffic will be "switched" across their WAN link. This becomes and issue as the remote office has local Windows domain controllers for faster file access on another VLAN... and in this scenario it sounds like the workstations would have to travel across the L2TPv3 tunnel to HQ to just have to go back across the tunnel to the remote office for file access. Sounds slow!
Does anyone have recommendations as to how to design this centralized, L2, OOB architecture. In my mind I would want the clients attempting authentication to the switch... switch forward to the CAS... CAS validates posture and passes down necessary VLAN to switch. All VLAN'ing and switching is kept remote. We operate all 3750 switches... so our infrastructure can work with NAC. Sorry for the long post, just wanted to try to explain the requirements. Thanks for the help.
-Mike
http://cs-mars.blogspot.com

Hi Mike -
Very good questions. You definitely do not need the L2TPv3 across the WAN to control the ports at the remote site.
The CASs can be deployed L2 In-Band (IB), L3 In-Band (IB), L2 Out-of-Band (OOB) or L3 Out-of-Band (OOB).
L3 OOB can be used to control the switches at the remote sites. A 2nd vlan is required for the remote site to serve as the authentication vlan. All ports start off on this Auth Vlan when a user plugs in.
The user receives an IP Address on this Auth Vlan and the local L3 device is the GWY. The L3 device should have ACLs to protect the rest of the network from this Auth Vlan. The only permit entries in the ACL should let the users get to CAS and the remediation servers. Using a network like 192.168.x.x and varying the 3rd octet on a per-site basis simplifies the ACLs if you are using the 10.x.x.x as your internal addressing. The ACLs should be places on all the MPLS routers to protect the production network from the Auth network.
Once the user proves trustworthy, the Clean Access changes the vlan on the switch to the production/normal vlan and the user has complete access as before.
CASs can be either one of the 4 roles (L2 IB, L3 IB, L2 OOB, L3 OOB) when they are added to the CAM.
If you plan to use L2 OOB for your HQ and L3 OOB for the remotes, you may need to add 1 more CAS pair to your architecture.
We have some great diagrams that the Clean Access product team have put together that will illustrate this architecture to you.
Your local SE / CSE should be able to provide this to you.
Let us know if you have any follow up questions.
Hope this helps.
peter

Can't install quicktime or itunes I recieve error code 2738. I'm running windows Vista 32 with Service Pack 2. I have tried old and new version of both programs. Also, have gone through Apple's online help with no good outcome

Can't install quicktimeor uninstall it for that matter and itunes I receive error code 2738 with both downloads. I'm running Window Vista with Service Pack 2. I have check for all window update. I have gone through Apple itune help list. Even going into cmd to do regsvr32 vbscript.dll which was successfull. Can you help...my son had to register his ipod at the neighbors house..What going on.
Son even call apple with no help and was give Microsoft number no help there either they wanted me to call HP.....run around

Excellent news!
Strange how sometimes the fixit works better than the manual methods, and sometimes the manual methods work better than the fixit. It differs from Microsoft fixit to Microsoft fixit too. (Unfortunately, because these "anomalous 2738s" are pretty rare as install errors go, I don't have a good feel yet for whether or not it's the fixit or the manual method that's more likely to work in iTunes/QuickTime installation contexts.)
Afraid I'm not very good on earbud troubleshooting, but fingers crossed the folks over at the iPod communities might be able to help:
https://discussions.apple.com/community/ipod

Windows Vista x64 with YouP-PAX XFI2007 Revision 2 Works quite w

Dear all X-FI members
I have an X-FI Xtreme Fidelity card and install with Windows Vista x64.
. I download the latest driver from Creative SB-XFI Version 2.3.002
2. I download the Media Source CMS5 Version 5.0.38
3. I install both of them
4. I download YouP-PAX XFI2007 Revesion 2 from the web filefont below:
http://files.filefront.com/YouP_PAX_X_FI2007_Rev2/;748043;/fileinfo.html
5. I extract to a folder. inside the folder there is an instruction as below:
Don't click on setup.exe but click on PAXsetup.exe. It gave an error.
6. I cancel and do it again by clicking on Audio(sub-folder) and then click on
setup(sub-folder)and then click on setup.exe. It gives me a table to select.
I uncheck driver box, and click next and go through the rest installation smoothly.
7. After restart computer. The MediaSourceGo pops up and display all features
8. I check THX console with gane mode and entertaiment mode. All works
9. On both Modes, all speakers 2., 4., 5. and 7. can be selected and have all sounds
0. X_FI CMSS-3D is enabled, X_FI Crystalizer is enabled, EQ and Mixer are worked.
. I do not play games so i do not know any thing about Alchemy and game stuffs
2. when you try to change the Speaker mode. You have to click on THX console to do
3. By the way, even the YouP-Pax revision was working well too. I don't see anything different from YouP-Pax X-FI2007 revision 2. They both work well for me.
4. Reminding that. When you install the applications. PleaseDon't click on setup.exe or Paxsetup.exe. But please click on Audio folder, and then setup folder. then you see the setup.exe, please go down and click on setup.exe and please uncheck the driver box and anything you don't want to be install then uncheck them. After that click on next and that is it. Restart computer.
With all the best to all of you.

Thank you for your post a reply RejZoR
I have come back and updtae the driver from YouP-Pax 2007 revision 2, and it was going through well. You are definitely right.
I hope that every one has all things worked well and be happy with what they have bought from creative
many thanks to those who has done a good contributions to the drivers and applications to make them work.

Windows Vista Business with MBP - wireless not working

I have successfully installed Windows Vista on my MBP using Boot Camp Assistant.
Problem is that the wireless ethernet does not work. I have heard of some file called "Install Macintosh Drivers for Windows XP.exe". If this is what I'm suppose to use where do I find this file?

Hi and welcome to Discussions,
first thing to do after the Vista Installation is to insert the OSX DVD that came with your MBP while in Windows.
Apple provides the BootCamp Drivers on that DVD.
The Driver Setup should start automatically once the DVD is inserted.
Let the Driver install and do the neccessary reboot into Vista once it has finished.
Hope it helps
Stefan

Cannot do wifi sync after update IOS 6 using windows vista pc with itunes 10.7

I cannot do the wifi sync,I am using IPAD 3 with IOS 6.I heard people said to do synchronous wireless.It would work I using Windows Vista,then I using Itunes 10.7.Somebody can help me to solve these problem or give me feedback to solve these problem.

Like many others, most of the the workarounds I tried worked but for awhile only and/or not reliably. After more googling and trial and error, I finally ended up with a somewhat reliable solution using the below 2 changes. (I am running up-to-date Win7 with an Ipad2 and an Iphone5 both on ios 6 + and up-to-date Itunes software on the PC).
1) Disable IPv6 on the wireless adapter (see CKNairb's earlier post)
2) Create a bat file which stops and starts the "Apple Mobile Device" service, then starts Itunes
The bat file can be placed in any dir and a desktop shortcut created to point to it in order to easily start Itunes (right-clicking properties of the shortcut and clicking "Change Icon" will even allow the selection of the Itunes icon to make it look just right :-) )
The bat file should contain these lines:
net stop "Apple Mobile Device"
net start "Apple Mobile Device"
"C:\Program Files (x86)\iTunes\iTunes.exe"
Edit accordingly as to whether your Itunes.exe resides in \Program (x86) or \Program.
By starting Itunes using this shortcut/bat file, you will ensure that the Mobile Device service is up and running when Itunes attempts to locate the devices wirelessly - this seems to be the key issue here.
Although it is not 100% reliable, I would say that both devices are detected and synced 90% of the time. (Itunes will always find one of the 2 devices).
Anyways, based on all I have gone through to get this work, I am willing to settle for "almost reliable" solution - hopefully this may work for others as well.
Happy syncing!

Sync Windows Vista Calendar with PC Suite & N95

Is anyone aware of a way to sync my N95's calendar with the new (and improved) Windows Calendar which comes free with Vista?
I'm using PC Suite 6.83.14.1 and this can only sync with Windows Vista Contacts (not calendar).
Thanks!

11-Mar-2007
01:58 PM
doom4 wrote:
Hi
I have a problem with compatibility of nokia pc suite , it doesnt work on Windows Vista , and i have to install some apps to my phone through usb cabel because i havent bluetooth card in my pc ( Is it any version for Windows Vista ? I didnt find it on czech nokia official web sites Message Edited by doom4 on 11-Mar-2007
01:59 PM
What version of Vista do you have? 32bit or 64bit? I have a 32bit Vista Ultimate and PC Suite works fine.
Nokia N73 v 4.0735.3.0.2 RM 133

How to share an usb-connected Windows Vista Printer with a Mac Mini

Hi,
I own a laptop Sony with Windows Vista (64) which has a printer connected via USB. I recently purchased a MAC MINI (middle model) and wanted to use my laptops printer for printing from my Mac mini. is this possible? thanks. Mx

Hey there Max,
If you can’t find the printer in the network browser, it may be easier to add the printer manually using the URL field, as shown in the article below.
Mac OS X: How to manually add a Windows shared printer - Apple Support
Ciao,
-Jason

Windows Vista: Bluescreen with iTunes

Installed iTunes 7.02 on Windows Vista (RTM) and wanted to import the XML library which I exported before on XP. result is a Windows Vista Blue screen. A
I also do get a blue screen when just importing a larger folder into the library (one or two folders works ok).
Any ideas how to get iTunes working under Windows Vista?
Toshiba Other OS

http://docs.info.apple.com/article.html?artnum=305042

Mac OS X Leopard Fails with Clean Access Agent

Hey All,
I've had several students in my office saying that Leopard and Clean Access don't work together. I haven't seen a specific error, yet, but was wondering if anyone else is seeing this problem...?
I'm using the 4.1.2.0 agent for Macs.
Mike

I am at Cal Poly SLO and we have this error "Agent user operating system is not supported" Part of our system has been changed back to allowing Mac users to Authenticate using the web browser instead of the agent. That should work until cisco updates the agent

Vista - Connected with Limited Access???

Please help!!! This problem is driving me mad. Every time I try to connect to the router whilst wireless it says "Connected with Limited Access"? I then plug the cable back in and "ta dah" it works fine. I have tried almost everything and cannot understand the problem - can anyone help?

try this one out.. click start >> networks >> network and sharing center >> manage my wireless network >> and on this page remove all wireless networks listed and restart your PC.

Windows Vista conflicting with Clean Access?

Similar Messages

Maybe you are looking for