Windows Vista Enterprise (Registered Editi

I have the full version of Enterprise given to me and my fellow students at my college. I was wondering if I was getting a blue screen of death because the drivers were made for the beta versions of Vista? I have deleted my temp files and have tried installing the 2.3.000 driver. Alls well until I have rebooted and it continues the installation process. I am then given the BSOD.
I successfully installed the drivers at one time, but oddly enough they showed in the device manager as being the best and most recent drivers for the hardware. But I still got the error message in my taskbar saying "No Audio Output Device is Installed."
I'm pulling my hair out here. My PC specs are:
3.2 ghz p4
2 gig RAM
GeForce 7600GT
Soundblaster X-Fi XtremeGamer
Windows Vista Enterprise
Any insight you can give me would be HIGHLY appreciated.

I suppose you use the 32bit version of vista?
try unpacking the install file (eg. winrar), and install the dri'ves only (remove old ones first, including software)?...\SBXF_PCDVTBETA_US_2_3_000\Drivers\se tup.exe?if it doesn't work, try the same with XP drivers?...\SBXF_PCDRV_LB_2_09_0007\Src\Drivers\se tup.exe?be sure to checkverwrite existing shared creative audio driver files?if you get the sound to work, then you can install audioconsole and such... note: with beta 2 I had to reinstall vista after I screwed up driver installation once. if you can, do a fresh install and start all over again.Message Edited by kid988 on 0-04-200704:53 AM

Similar Messages

Oracle 10.2.0.3.0 Installation in window vista Enterprise (OUI quits )

Dear All,
This is my first post in OTN just has joined . m really glad to be in here
searching for help and support where i know its the best place to get it . where professionals and expert are linked together.
Problem Brief :-
I am trying to install oracle 10g R2 (10.2.0.3.0) in windows vista Enterprise Edition using OUI from the oracle media
things goes smoothly until it come to (install ) tab than the OUI disappeared with out placing any error msgs
I will be pleased if someone can help and assist in the above mentioned
Thanks in advance

From Oracle Certification matrix:
Operating System: Microsoft Windows Vista (x86) Version Vista
Oracle Database - Enterprise Edition Version 10gR2
N/A Version N/A
Status: Certified
Product Version Note:
None available for this product.
Certification Note:
Oracle Database 10g Release 2 (10.2.0.3) for Microsoft Windows Vista (32-bit) and Microsoft Windows Server 2008 (32-bit)" media must be used to install Oracle Database on Windows Vista or Windows Server 2008.
Do not use Oracle Database 10g Release 2 (10.2.0.1) to install the database on Windows Vista and Windows Server 2008.
Do not apply this media to any other Microsoft Windows 32-bit OS's.
Use Oracle Database 10gR2 (10.2.0.3) to install
See MetaLink Note 742060.1 Release Schedule of Current Database Patch Sets

Installing OVI Suit on Windows Vista Enterprise di...

Hy,
I have a great problem with the OVI suit installation on a Windows Vista Enterprise 32Bit.
Before i install ovi suit, there was the "Nokia PC Suit" on the PC this software is uninstalled now, and also i run the “Nokia_PC_Suite_Cleaner_7_1_1.exe“.
Also i have browsed the Support Board and Google/Bing for solutions,
But nothing of these entries can help me with this installation.
OVI Suit version is actually downloaded yesterday (3.0.0.290).
The installation stops at 1/3 of the normal run.
I have tested the installation on 3 machines like the problem PC, without a problem.
So i have no idea what i can do to run the installation to the end.
Now I have started a new try to install the OVI Suit, and deleted before all Registry-Keys.
By the way, is this really normal that the installation needs more than 120MB RAM?
So it’s 16:30 at your site next business day is Monday, i hope you have all details and can help me.
Greats from Austria
Attachments:
snipp.JPG ‏31 KB
snipp2.JPG ‏24 KB

Client Certifications
OS Product Server Status Addtl. Info. Components Other Issues
Vista SP1 12.0 N/A Certified None None Yes None
Vista 12.0 N/A Certified None None Yes NoneIt is certified as a Client (Desktop) only. Means, you can access Oracle Apps 11i/R12 from a machine running Windows Vista, but it is not certified as Application/Database tiers.
And also the below link from blogs.oracle.com says that R12 is certified with vista.
http://blogs.oracle.com/stevenChan/2008/07/windows_vista_service_pack_1_certified_with_apps_1.html
Release 12
- Oracle Applications Release 12 with R12.ATG_PF.A.DELTA.3 (patch 6077669) or later
- Microsoft Vista Service Pack 1 (SP1) desktop clients running Internet Explorer 7
- Sun Java plug-in (JRE) 1.5.0_12 or later

I cant access itunes storesMicrosoft Windows Vista Home Basic Edition Service Pack 2 (Build 6002) Hewlett-Packard Compaq Presario CQ61 Notebook PC iTunes 10.6.0.40 QuickTime not available FairPlay 1.14.34 Apple Application Support 2.1.7 iPod Updater Libra

i cant access to itunes store
here is dignostic report
Microsoft Windows Vista Home Basic Edition Service Pack 2 (Build 6002)
Hewlett-Packard Compaq Presario CQ61 Notebook PC
iTunes 10.6.0.40
QuickTime not available
FairPlay 1.14.34
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0025AE8C032360A0
Current user is not an administrator.
The current local date and time is 2012-03-27 13:06:24.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.6.0.40 is currently running.
iTunesHelper 10.6.0.40 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {23DDA231-A7E0-409A-AB19-CEDE8ACE6359}
Description:          speedinfo
IP Address:          182.237.181.108
Subnet Mask:          255.255.255.255
Default Gateway:          0.0.0.0
DHCP Enabled:          No
DHCP Server:
Lease Obtained:          Thu Jan 01 05:30:00 1970
Lease Expires:          Thu Jan 01 05:30:00 1970
DNS Servers:          202.177.240.125
                    202.177.240.251
Adapter Name:          {948D9871-ADAF-4632-8D0C-538770929B52}
Description:          Atheros AR5007 802.11b/g WiFi Adapter
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Thu Jan 01 05:30:00 1970
Lease Expires:          Thu Jan 01 05:30:00 1970
DNS Servers:
Adapter Name:          {4D499748-069C-4E58-A116-DF748DA3912C}
Description:          Realtek RTL8102E/8103E Family PCI-E Fast Ethernet NIC (NDIS 6.0)
IP Address:          192.168.0.2
Subnet Mask:          255.255.255.0
Default Gateway:          192.168.0.1
DHCP Enabled:          No
DHCP Server:
Lease Obtained:          Thu Jan 01 05:30:00 1970
Lease Expires:          Thu Jan 01 05:30:00 1970
DNS Servers:          192.168.0.2
                    192.168.0.4
Active Connection:          speedinfo
Connected:          Yes
Online:                    Yes
Using Modem:          Yes
Using LAN:          No
Using Proxy:          No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
iTunes has never successfully accessed the iTunes Store.

i cant access to itunes store
Can you walk us through what happens when you try to connect to the Store, please?

I have a 4th gen ipod nano which will not sync after restore. i have run itunes diagnostics and attached thMicrosoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)e results. can you help please?

Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
Sony Corporation VGN-NS20E_P
iTunes 10.6.1.7
QuickTime 7.7.1
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ACE4032C3EC8
Current user is not an administrator.
The current local date and time is 2012-05-26 22:17:26.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {78DA402D-66EE-4084-9D5E-8A010E0B8437}
Description: Atheros AR928x Wireless Network Adapter
IP Address: 192.168.2.8
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.2.1
DHCP Enabled: Yes
DHCP Server: 192.168.2.1
Lease Obtained: Sat May 26 19:10:42 2012
Lease Expires: Sat May 26 19:10:41 2012
DNS Servers: 192.168.2.1
Adapter Name: {C1458549-CA0B-4A3B-8F8E-9259653AA0DD}
Description: Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 00:00:00 1970
Lease Expires: Thu Jan 01 00:00:00 1970
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-05-26 20:57:29.
**** Device Connectivity Tests ****
iPodService 10.6.1.7 is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
RICOH OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Connected Device Information:
JULES'S IPO, iPod nano (4th Generation) running firmware version 1.0.4
Serial Number: YM839W553QU
Bus Speed: 61440
Most Recent Devices Not Currently Connected:
iPhone 4S running firmware version 5.0.1
Serial Number: DNWH3R84DTD2
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

Hello, VvioletT.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues syncing your iOS device. Here are a couple articles that I would recommend going through when experiencing this issue.
iOS: Troubleshooting USB-related alerts when syncing
http://support.apple.com/kb/TS5254
Resolve issues between iTunes and security software
http://support.apple.com/kb/ts3125
Cheers,
Jason H.

USB Connections on Windows Vista 32-bits edition

Hi. Since I installed Windows Vista 32 bits edition (don't ask me why, but when I used the 64 bits edition- which I uninstalled because some games didnt' work well- this didn't happen), I have this trouble.
I have a N80. When I use the USB Connection in PC Suite Mode, the Nokia PC Suite perfectly detects the phone, and Windows installs the drivers by downloading them from Windows Update, I know this because when the balloon in bottom right corner appears, it says "Installing new hardware software..." and if I click, the little windows apeears, and it says "Downloading from Windows Update".
The problem comes when it finishes installing it. Windows says that there was an error when installing new devices, the error code is 28, and the legend is:
The name is already used as a service name or as a display name of some service.
Or something like that, I have Windows in spanish and I tried to translate it. And the Nokia PC Suite never displays "Nokia N80 connected via USB", always remain as "No connected phones". This doesn't happens if I use the bluetooth mode, but I need the USB because I want to check if firmware updates are avaliable and other things.
I tried in differents USB ports with the same results.
Has anybody had a similar experience or any idea? Or maybe is this a known issue? (obviusly known by everybody but me, ...)

- Ihave the exact same problem as you do and so far have not found a solution to the problem. Everytime I check the post board I see more and more have viewed your post but no one else seems to have an answer for you either. I e-mailed tech support and answer I got was no help what so ever to me. So posting a comment to your question in hopes of getting someone's attention that maybe can help us both. Who knows maybe Creative might even respond to us.

When I run a diagnostic on my network connection, Itunes says that a secure connection was not found giving the following message. Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002) Hewlett-Packard HP Pavilion dv6700 Notebook PC iTu

Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
Hewlett-Packard HP Pavilion dv6700 Notebook PC
iTunes 10.2.1.1
QuickTime 7.6.9
FairPlay 1.11.16
Apple Application Support 1.5
iPod Updater Library 10.0d2
VoiceOver Kit 1.4 (222093/222742)
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.0.25
Apple Mobile Device Driver 1.55.0.0
Bonjour 2.0.4.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 0025AAF8089EC380
Current user is not an administrator.
The current local date and time is 2011-05-15 21:05:05.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: dc0c6f739bfede483c8983f10e41784f
iPodService 10.2.1.1 is currently running.
iTunesHelper 10.2.1.1 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:    {588EB1BD-8374-43B1-B687-C47C33764298}
Description:    Intel(R) Wireless WiFi Link 4965AGN
IP Address:    192.168.1.2
Subnet Mask:    255.255.255.0
Default Gateway:    192.168.1.1
DHCP Enabled:    Yes
DHCP Server:    192.168.1.1
Lease Obtained:    Sun May 15 20:23:07 2011
Lease Expires:    Mon May 16 20:23:07 2011
DNS Servers:    192.168.1.1
Adapter Name:    {1C11AE53-28A5-4AC7-BA9F-CD4109D7856C}
Description:    Realtek RTL8101E Family PCI-E Fast Ethernet NIC (NDIS 6.0)
IP Address:    0.0.0.0
Subnet Mask:    0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:    Yes
DHCP Server:
Lease Obtained:    Wed Dec 31 18:00:00 1969
Lease Expires:    Wed Dec 31 18:00:00 1969
DNS Servers:
Active Connection:    LAN Connection
Connected:    Yes
Online:        Yes
Using Modem:    No
Using LAN:    Yes
Using Proxy:    No
SSL 3.0 Support:    Enabled
TLS 1.0 Support:    Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
Last successful iTunes Store access was 2011-04-30 21:01:11.

Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
We'd better check on that, kris. If you enable iTunes in your Windows firewall, does that help with your connection? See the following document for instructions:
How to enable iTunes in the Windows XP Firewall
EDIT: Drat ... gave you the link to the wrong document. Try this one instead for your Vista:
How to enable iTunes in the Windows Vista and Windows 7 Firewall
Message was edited by: b noir

TS1814 Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)

I can not connect to the iTunes store can anyone help meMicrosoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
Gateway GT5464
iTunes 10.7.0.21
QuickTime 7.7.2
FairPlay 2.2.19
Apple Application Support 2.2.2
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.0.59
Apple Mobile Device Driver 1.62.0.0
Bonjour 1.0.6.2 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0027AD8C09AA48C0
Current user is not an administrator.
The current local date and time is 2013-11-23 13:55:29.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel Corporation, Intel(R) 82945G Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: 12c6ce1e6c8749bf21c4b93f896a44e8
iPodService 10.7.0.21 is currently running.
iTunesHelper 10.7.0.21 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {646A3344-F31F-4EE7-993F-DE95A709D38D}
Description: Intel(R) PRO/100 VE Network Connection
IP Address: 192.168.0.15
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
DHCP Enabled: Yes
DHCP Server: 192.168.0.1
Lease Obtained: Sat Nov 23 13:31:28 2013
Lease Expires: Sat Nov 23 14:31:28 2013
DNS Servers: 209.18.47.61
209.18.47.62
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
Last successful iTunes Store access was 2012-09-11 23:36:26.

Hello tatyana9196,
We've an article that provides a whole host of information and steps that can help restore your connection to the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers,
Allen

IPhone 3G 2.1 connection error with iTunes 8 on Windows Vista Enterprise

I was previously able to connect my iphone with my work computer (Windows Vista Enterprise) and it would recognize my phone. However, since I updated my iphone to version 2.1, it will not recognize the phone and gives me the following error message:
"iTunes could not connect to the iphone because an unknown error occured (0xE8000024)."
I am able to connect my phone with version 2.1 to my home computer running Windows XP SP2.
Any idea what may be causing the connection error in Windows Vista?

Hey TranceCadet,
This could be caused by a USB connection issue.
Make sure the iPhone is directly connected to a high speed USB port on the PC and not plugged into a hub, monitor, or keyboard. Disconnect any other USB devices, other than the keyboard and mouse.
This article has some general USB troubleshooting tips: http://support.apple.com/kb/TS1286
You may also want to disable or reconfigure any security software. This article will walk you through putting the PC in a selective startup mode, which will bypass most application conflicts.
http://support.apple.com/kb/HT2292
Jason

ITunes for Windows Vista 64-bit editions

Simple question: when will iTunes support 64-bit Vista? No useless "64-bit shouldn't be used by anyone"-style answers, please. Assume I know exactly what I'm doing
Windows Vista Ultimate 64-bit Edition

Simple question: when will iTunes support 64-bit
Vista? No useless "64-bit shouldn't be used by
anyone"-style answers, please. Assume I know exactly
what I'm doing
Windows Vista Ultimate 64-bit
Edition
Simple answer, Nobody knows.

Conflicts between Itunes and Windows Vista Home Premium Edition

I am looking to purchase a new pc with Windows Vista. What are some possible problems I could have with Itunes?

I have a new Windows Vista Home premium laptop and am NOT able to use the latest version of iTunes. Hopefully by the time you get your new computer, Apple will have taken the time to fix the garbage program that they are passing off as the latest version of iTunes.

Uninstalling oracle 10g enterprise edition from windows vista

HI There,
I want to uninstall oracle 10g enterprise edition from windows vista home premium edition. I have uninstalled it using oracle universal installer and then deleted folder from program files. But I am unable to delete the main folder i.e. D>Oracle..
It is displaying error message 'access denied' Please suggest me on this issue.. How can I delete that one so that I can instal it again. I would be really grateful.
kind regards

Can someone help me on this issue.. That would be great...

Windows Vista Oracle 10g Express Edition ODBC problem

Hi,
I am running my Oracle 10g Xpress Edition locally on Windows Vista Enterprise Edition. I am trying to create an ODBC connetion to the local XE using Window ODBC utility. I selected the Oracle in XE driver to create the connection, when I test it I get
Unable to connect
SQLState=S1000
[Oracle][ODBC][Ora]ORA-28547: connection to server failed, probable Oracle net admin error...
I am new to Oracle kindly excuse my ignorance :-)

I think you should probably download the file again, it might be corrupt.
~Jer

Problem launching flash cs5 and cs5.5 on windows vista

Hello Every Body. I have a problem launching flash cs5 and cs5.5 on windows vista home premium edition. When i launch it, the register screen appears(the one that tells the trial time left) but the flash main window always stays black (or white)and is not responding. I had it working about one week ago and i can't figure out what is the problem .It tried reinstalling couple of times without succes. I also tried deleting the left flash cs5 program files after uninstall but it didn't work . I would need your advice. Here is the screen as it appears:
BEFORE I CLICK IT IT IS BLACK9(notice that in the up bar it sais not responding)
Thanks
-jeremyskateboard

here is the black screen i get

Forms 10g installed and running on Windows Vista

Update 12-Dec-2008: Oracle has published NOTE 559067.1 -- How to Install Developer Suite 10.1.2.0.2 - hence 10.1.2.3 - on Windows Vista, 24-OCT-2008 with some installation help.
Update 07-July-2008: Added text at the bottom showing how to find patchsets for Forms 10g.
Update 29-May-2008: This thread was started in November, 2007. In January, 2008, Oracle released Patch 3 for Forms 10g, which makes Forms 10g compatible with Windows Vista. As time permits I'll try to keep the information in this post up to date. Updated information will be inserted as blue text.

Original message begins here:
This is a second thread I am posting to outline the steps I have used to install Forms on a Windows Vista Home Basic laptop. The other thread describes installing Forms 6i:
Forms 6i installed and running on Windows Vista
Please read through the initial part of that post for the background. I realize Oracle has not certified Forms 10g to run on Vista, but the time has come for my associates and I to upgrade our old computers to new desktop/laptop platforms, and I would hate to acquire XP machines and be stuck with them for the next 5 years. (Note: Since first posting this message, Oracle has certified Forms 10g Patch 3 (version 10.1.2.3.0) to run on Vista) So after another person informed me that he had Forms installed and running on Vista, I went ahead and bought one. I found that as long as I set the compatibility mode to run Forms programs as Windows XP (and a few other changes), Forms 6i and 10g run quite satisfactorily.
Update 29-Jan-2008: Unfortunately, it turns out that the Forms 10g Builder running on Vista had a major flaw: If you try to develop a form, the Builder will crash if you try to compile a procedure that calls another procedure in the form that has errors. The problem is reported and described in this thread: Error compiling a form under Vista
Update 12-Mar-2008: Installing Patch 3 on Vista does not help with this problem -- the Builder still crashes in the same situation.
Update 25-July-2008: Applying Patch 7047034 has corrected the problem. See this link within this thread: Forms 10g: Installing Patch 7047034 on Windows Vista
Webutil note: I am stuck in a Forms 6i client/server world, so all my forms must run in that environment. Therefore I have not used any Webutil software, and I do not know whether that part will run under Vista.
Internet Explorer note: On Windows Vista, IE CANNOT be used to run the Web Forms runtime. It crashes immediately when you try to run a form. Instead, I can use either Firefox (Firefox 2, Firefox 3.0 Crashes with Forms 10g) or Netscape, as long as they are set to disable java. [ Correction: IE7 on Vista now runs the Forms 10g forms. You just need to add "?config=jpi" to the browser URL when starting the Web Forms session. More IE/Vista info: [url=http://forums.oracle.com/forums/thread.jspa?threadID=642973]Vista JInitiator Problem ]
The Oracle Developer Suite download page:
http://www.oracle.com/technology/software/products/ids/index.html
Oracle Developer Suite Installation Guide:
http://download.oracle.com/docs/cd/B25016_07//doc/dl/core/B16012_04/toc.htm
The steps below are those I followed to install Forms 10g (version 10.1.2.0.2)
I. Preliminary system changes in Windows
When I started installing, I got the following error message: Install has encountered an error while
 attempting to verify your virtual memory settings.
 Please verify that the sum of the initial sizes of
 the paging files is at least 256 MB.To fix this: Go to Control Panel, System and Maintenance, View amount of RAM and processor speed (under "System"),
Advanced system settings (in left "Tasks" column), Advanced tab, Settings (under "performance"), Advanced tab:
Virtual Memory shows a "Total paging file size for all drives: 2337MB.
Click "change", Uncheck "Automatically manage paging file size for all drives"
Click "custom size:", set Initial size to: 2048, Max to 4096
Click set button, then OK, get message:The changes you have made require you to restart your computer before
 they can take effect.Restart the computer.
II. Installing Forms 10g
1. Download two files from Oracle:
ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
2a. Before extracting, it is a good idea to shut down any virus protection software. It can sometimes prevent some files from being created.
2b. Extract both into the C:\oracle directory, as disk1 and disk2.
3. Using Windows Explorer, change the properties of setup.exe in the C:\oracle\disk1 folder. (In windows explorer, right click, properties, Compatibility tab.) Change the compatibility to run as Windows XP (Service Pack 2).
4. Right click setup.exe and click "Run as administrator"
5. Select "Installation type" = Complete (1.11 GB)
6. Received this message:Windows Firewall has blocked this program from
accepting incoming network connections. If you
unblock this program, it will be unblocked on all
public networks that you connect to.
C:\users\steve\appdata\local\temp\orainstall...
2007-10-29_11-59-08am\jre\1.4.2\bin\javaw.exeI clicked "Unblock"
7. Received this message: "Provide outgoing mail server information" I entered the smtp mail server that I use.
8. A summary screen displayed showing 274 products under New Installations.
I clicked the Install button.
9. Received this message: You can find a log of this install session at:
C:\Program Files\Oracle\Inventory\logs\installActions2007.....log
10. The installation completed. Installed products shows Forms 10.1.2.0.2
III. After the install completed
1. Create a shortcut to the Forms 10 Builder on the Desktop.
On the shortcut line, after the .exe, add *userid=userxxx/pwxxx@orcl* so Builder automatically logs into 10g database. If you do step 4 below (creating an easily-accessible folder to use for your forms) change the "Start in" path on the shortcut so it points to that folder. Otherwise, Forms Builder will not find referenced objects and PLL libraries when it opens a form. Also do the same on the Start, All Programs shortcut for the Forms Builder.
Edit: After applying Patch 3, the following steps are not necessary.
Set its compatibility to Windows XP.
Set checkbox: "Run this program as as an administrator." (Without this, FormBuilder will NOT open a PLL library.)
Click the "Show settings for all users" and change values there.
2. Copy "Start OC4J Instance" icon to desktop.
Set its compatibility to Windows XP.
The first time it runs, I got a Windows popup to unblock program named Java. I clicked "Unblock".
3. tnsnames.ora:
Rename C:\oracle\DevSuiteHome_1\network\admin\tnsnames.ora
to: tnsnames_orig.ora
If you created a tnsnames.ora file for Forms 6i, just copy it to the path above. If not, do this:
Create a new tnsnames.ora file, copying entries old file on my old laptop, which contains all the connections I use.
Delete the old laptop entry, replace with new entry for the new local ORCL connection on new laptop from tnsnames file renamed from the c:\oracle\... ...\10.2.0\db_1\ path.
4. Optional: Create an easily accessible folder to store fmb files:
C:\users\steve\.1\fmb10
You don't really want to keep drilling into C:\oracle\DevSuiteHome_1\forms, and then find your .fmb file among the several dozen oracle-supplied files.
To create a folder named .1, you have to open a CMD.exe (Windows DOS) window, and type the Make Directory command:
MD .1
That will create the folder within the current directory -- mine defaults to C:\users\steve
Note: If you also need to use Forms 6i like me, DO NOT EVER open a .fmb file in the Forms 10 Builder from the Forms 6i folder. If you compile it, or even worse, save the .fmb, Forms 6i *cannot ever* access the file. Instead, always use the File Manager (Windows Explorer) to copy the fmb from the fmb6 folder into the fmb10 location.
5. Change the Forms 10g Default.env file using a text editor.
This file replaces all the settings originally written to the Windows Registry (GREAT idea, Oracle! I hate the registry.) No more Regedit. The default.env file is located at: (DevSuiteHome_1 path)\forms\server\default.env
Locate line with: FORMS_PATH= and add:
;C:\users\steve\.1\fmb10
Add a new line:
FORMS_MMAP=FALSE
The above allows compiling an fmx while the form is running.
Add a new line:
FORMS_ROWLOCK_OPTIMIZATION=FALSE
(This fixes Oracle bug number 3949854, which prevents automatic skipping if the same value is typed over another value. TAR 4806199.993 Automatic Skip failure...) See bug 4068896
Add a new Line:
FORMS_RESTRICT_ENTER_QUERY=False
This allows use of Query-Where window in enter query, after entering a colon in any input field. Without this, Forms returns FRM-40367: Invalid criteria in field nnn in example record. Oracle shut it down to prevent "sql injection" attacks.
6. Jiniator setup:
Run file jinit.exe in C:\oracle\DevSuiteHime_1\jinit\jinit.exe
It installs Jinitiator 1.3.1.22.
I installed it in C:\oracle\JInitiator 1.3.1.22\
For Firefox, make sure a copy of file \bin\NPJinit13122.dll resides in C:\Program Files\Mozilla Firefox\plugins.
For Netscape, the path is: C:\Program Files\Netscape\Navigator 9\plugins
7. Browser settings
See the note above about using Firefox 2 and not Firefox 3!
In Firefox 2 go to: Tools-> Options-> Content
Uncheck the "Enable Java" checkbox
--Firefox terminates if this is not done!
Note: After my system automatically installed updates to either java or Firefox, re-check the "Enable Java" setting. I am suspicious that one of these installs re-enables java in the browser.
Also note: some web sites cannot display properly if java is disabled. Example: U.S. time website: http://www.time.gov Use Internet Explorer to view these.
In Netscape make the same changes as Firefox. Without disabling java, it also terminates when you try to run a form.
Creating a url to use in the browser:
Try this:
http://127.0.0.1:8889/forms/frmservlet
If it does not work, change the 8889 port number as follows:
Open file: C:\oracle\DevSuiteHome_1\install\portlist.ini
Note the number in line:
Oracle Developer Suite HTTP port = 8889
Use the number as the port number.
You can also change the 127.0.0.1 to the computer name:
Control Panel, System and Maintenance, See the name of this computer (under "System"). Mine is "steve-PC"
So the alternate URL is: http://steve-PC:8889/forms/frmservlet
To try out the URL, start the OC4J instance set up above. Then start either Netscape or Firefox, and enter the URL. You should get a welcome screen.
If the above URL works, start up the Forms Builder, and open Edit, Preferences. On the General tab, uncheck the "Build before running" check box (optional). On the Runtime tab, set the "Application Server URL to the url above.
To run a real form, add this to the URL after frmservlet, (with no spaces):
?form={formname}&userid={userxxx}/{passwordyyy}@{connect-string}
but replace the parts in curly braces with the appropriate values. Example:
http://127.0.0.1:8889/forms/frmservlet?form=ABC&userid=abc123/zyx@orcl
Setting up Forms Builder to directly run a form in the browser:
Run the Forms Builder. Go to Edit, Preferences, Runtime tab.
Set the Application Server URL to:
http://127.0.0.1:8889/forms/frmservlet
(or use whatever URL string you developed above)
Set the Web Browser Location to:
"C:\Program Files\Netscape\Navigator 9\navigator.exe"
(or an equivalent to run the Firefox browser).
8. FORMSWEB.CFG file changes
The file is located at:
C:\ORA_DS_101202\DevSuiteHome_1\forms\server\formsweb.cfg
I changed the following two lines in the file, but these are my personal preferences:
separateFrame=true
lookandfeel=Generic
9. FMRWEB.RES file changes
For Oracle help: Enabling Key Mappings
The file fmrweb.res defines actions (triggers that run) when a function key is pressed while running Forms. The one released has unix-style key mapping, but I prefer keys originally mapped for Windows PC Forms users. There is a fmrpcweb.res in the same folder that can be renamed to fmrweb.res.
In the C:\oracle\DevSuiteHome_1\forms path, I renamed fmrweb.res to fmrweb_orig.res.
I have a file that I prefer to use, so I put it into the folder as fmrweb.res. The contents are listed below. It is organized so the most important keys are listed alphabetically at the top (URFD column is the sort column), followed by a group of less-important keys. These are keys that are available to users, but they either would not use, or are disabled within most forms. The URFD column in the second set starts with a hex A0 character, which is a high-order space, so collates after normal alphabetic characters. (Note: If you want to copy the text below and use it, the hex A0 character has been changed by the forum software to a space. So you would need to use a text editor with hexadecimal character capabilities to replace the space with the original character. )
My file has special keys defined for F2 (I use it for a debugging Key-F2 trigger in my forms), and a "Cursor to Home" F12 function. All the rest are pretty much the same as in the released fmrpcweb.res file, only mine are organized alphabetically on the URFD column.
The Web Forms fmrweb.res file is editable using any programming editor (NOT MS Word!!!). The old Client/Server key mapping file, fmrusw.res, could only be changed using the Oracle Terminal program (and it is a pain to use).
Here is the main part of my fmrweb.res file:#
#Jfn :Jmn: URKS :Ffn : URFD
# : : (User-readable : : (User-readable
# : : Key-sequence ) : : function description)
118 : 1 : "Shift F7" : 74 : "Clear Form"
121 : 0 : "F10" : 36 : "Commit"
117 : 0 : "F6" : 65 : "Create Record"
10 : 1 : "Shift Enter" : 82 : "Cursor to Home" # sdsu uses this
123 : 0 : "F12" : 82 : "Cursor to Home" # sdsu uses this
 #: --Alt+Home works, but leaves the Action (first
 #: --pull-down menu item) highlighted. Press Esc or
36 : 8 : "Alt Home, then Alt" : 82 : "Cursor to Home" #-- Alt again to clear highlight.
117 : 1 : "Shift F6" : 63 : "Delete Record"
119 : 0 : "F8" : 77 : "Execute Query"
120 : 0 : "F9" : 29 : "List of Values"
9 : 0 : "Tab" : 1 : "Next Field"
40 : 0 : "Down-Arrow" : 7 : "Next Record"
9 : 1 : "Shift Tab" : 2 : "Previous Field"
38 : 0 : "Up-Arrow" : 6 : "Previous Record"
112 : 0 : "F1" : 35 : "Show Keys"
116 : 1 : "Shift F5" : 69 : " Clear Block"
116 : 2 : "Ctrl F5" : 3 : " Clear Field"
113 : 1 : "Shift F2" : 80 : " Count Query Hits"
112 : 1 : "Shift F1" : 78 : " Display Error"
114 : 0 : "F3" : 73 : " Duplicate Item"
115 : 0 : "F4" : 64 : " Duplicate Record"
69 : 2 : "Ctrl E" : 22 : " Edit Field"
122 : 0 : "F11" : 75 : " Enter " # Causes validation, w/o cursor move
118 : 0 : "F7" : 76 : " Enter Query"
81 : 2 : "Ctrl Q" : 32 : " Exit"
112 : 2 : "Ctrl F1" : 30 : " Help"
34 : 0 : "Page Down" : 66 : " Next Set of Records"
119 : 1 : "Shift F8" : 79 : " Print"
10 : 0 : "Enter/Return key": 27: " Enter/Next Field"
33 : 0 : "Page Up" : 12 : " Scroll Up"
116 : 0 : "F5" : 87 : " F5 Key for special uses"
#121 : 3 : "Shift Ctrl F10" : 82 : " Function 0" #--disabled. Cursor to home defined above
112 : 3 : "Shift Ctrl F1" : 83 : " Function 1"
113 : 0 : "F2" : 84 : " Function 2"
113 : 11: "Ctrl Alt Shift F2":95: " List Tab Pages" #<-REQUIRED, or F2 cant be assigned
114 : 3 : "Shift Ctrl F3" : 85 : " Function 3"
115 : 3 : "Shift Ctrl F4" : 86 : " Function 4"
117 : 3 : "Shift Ctrl F6" : 88 : " Function 6"
118 : 3 : "Shift Ctrl F7" : 89 : " Function 7"
119 : 3 : "Shift Ctrl F8" : 90 : " Function 8"
120 : 3 : "Shift Ctrl F9" : 91 : " Function 9"Finding Forms 10g Patchsets
Here is how to do the search: Log into metalink ( https://metalink.oracle.com ), then click on the Patches & Updates tab, then Simple Search.
In "Search by", select Product or Family. Enter "Developer Forms" in the box.
Then click the Release choices, and select "iAS 10.1.2.3"
Patch Type should be "Patchset/Minipack"
Platform or Language should be "Microsoft Windows (32-bit)"
Click Go, and the Forms 10g patch should show up. As of July, 2008 the only one available is: [url=
https://updates.oracle.com/ARULink/PatchDetails/process_form?patch_num=5983622&release=1710123&plat_lang=912P&patch_num_id=943599
]5983622
Edited 2008-12-12 to add a link to Oracle Note 559067.1 and added the fmrweb.res file listing.
Edited 2008-10-28 to change text format to work better within new forum format
Edited 2008-7-7 to add patchset search information.
Edited 2008-4-21 to modify information.
Edited 2008-3-6 to add information.
Edited 2008-5-29 to update information.

I followed your instructions and installed Developer Suite 10G on Windows Vista Home Premium edition. I have Oracle 11G DB running on the same machine.
Two points, Steve:
1. When I tried to set the maximum virtual memory to 6110 an error message displayed from Windows and told me that I can't set the maximum virtual memory to more than 4096. I set it to 4090 and it worked and I got nothing wrong during the installation process.
2. After installing JInitiator and disabling Java on Firefox I called the http://127.0.0.1:8889/forms/frmservlet page and everything seemed to be OK because the Oracle Forms Services logo appeared and then a successful installation message appeared , but as I clicked (ok) to continue a gray screen appeared inside the browser (like the one displayed when you try to run a Java applet inside a browser) and then I wait to death till something appears but sadly nothing. I just get a blank gray screen inside my Firefox browser.
Do you have any idea what to do to solve the problem?
Regards

Windows Vista Enterprise (Registered Editi

Similar Messages

Maybe you are looking for