Windows vista Error code when installing on my mac

Okay so i'm doing everything exactly as i know to be right, and i'm getting this error message Error: 0x8007045D when it starts copying files, during the installation, is there something wrong with my friends DVD drive or something, cause i've already installed it on my mac perfectly fine, first try..... Help would be greatly appreciated.... thank you in advanced

JimHess provides the answer that worked!
"The easiest way is to simply download the trial version of Lightroom 4.4 and install it. On the initial screen that displays when you start Lightroom (after you have installed it) has an option where you can indicate that you have a serial number. Choose that option, enter your serial number, and you are good to go."

Similar Messages

Error codes when installing elements 12

Hi all,
Who can help me with these errors. How can I make it right again. Very frustrating
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR: DF006, DF014 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Adobe Photoshop Elements 12 12.0.0.0 {48C6BCD3-4F00-4CFE-BDD4-8D57C640B985} -----------
ERROR: DF006: The path "/Applications/Adobe Photoshop Elements 12" already exists and is not a directory, Please rename or delete and retry(Seq 1)
ERROR: DF014: Unable to create symlink "/Applications/Adobe Photoshop Elements 12/Adobe Photoshop Elements 12"(Seq 1)
Thanks for the help
Denise

It has been installed bedore and then it suddenly did not work anymore. That's why tried to install it again, but unfortunatly did not work
Verstuurd vanaf mijn iPhone
Op 25 jun. 2014 om 22:14 heeft "Barbara B." <[email protected]> het volgende geschreven:
error codes when installing elements 12
created by Barbara B. in Photoshop Elements - View the full discussion
Did you try to install before without removing anything that did get installed from your applications folder before trying again? You don't have the installer files in the applications folder, do you?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6497038#6497038
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Satellite L500-21T - Stop error code when installing Windows 7

Hello
I bought a notebook Satellite L500-21T from saudi arabia.
I lost the hd recovery during trying fix windows 7 installation. If I try to install windows 7 I get stop code 0x0000009c error. If I turn sata to compitibality from AHCI Windows xp sp2 not sp3 installed but most drivers like display and wlan not installed. Trying to update BIOS give that is not suitable for that the phoenix version of bios 1.5
I changed HD and RAM but the same problem. It may the BIOS?
plz help me

Hi buddy,
Do you install Windows 7 from Toshiba recovery disk or normal Microsoft disk?
Usually if you install Windows 7 from recovery disk, everything should work well because its pretested image from Toshiba and you get back out of box settings (factory settings).
If not it seems to be a hardware malfunction
By the way: Try to load the default settings in BIOS. You can do this if you press F9 key in BIOS.

Bootcamp error code when installing drivers from lepard disk

hello everyone
ive just tryed to install windows on my new mbp and it was all going great till i put in the lepard disk to install the drivers
the disk starts up and appairs to start inputing the new drivers when is stops and tells me there is an error "code 2753"
im not sure what to do next to fix this anyone have any ideas?
thanks
sean o'hare

You might want to ask that question in the Boot Camp forum.

Windows update error 800f0246 when installing printer driver

I have Win 7 pro 64 bit and an HP3520 printer. HP site says a Windows 7 driver is available via windows update. When I go into Windows update, the drivers shows up under optional downloads. When I try to download and install it it fails with error code 800f0246. All other updates install fine. I tried multiple times with the same error.
When I go into device manager the printer is listed under other devices with an icon indicating a driver issue. When I try to update the driver it finds the downloaded driver that Windows update downloaded. I select it and it fails.
I have Windows 7 beta still on my laptop and the printer driver installs from windows update just fine.
Any ideas?

No go. Uninstalled, rebooted, tried to reinstall again, still failed. Fails when the printer is disconnected as well. The HP site does not have a driver for manual install. Any links for a driver lead to here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01874792&lc=en&dlc=en&cc=us&lang=en&product=305968 Those steps do not work because the driver in windows update fails to install.

T-500 running Windows Vista - Error trying to install Service Pack 2

I just spent my entire Saturday trying unsuccessfully to install SP2 for Windows Vista on my T-500. My laptop has Vista Home Premium as the OS and is fully patched with SP1.
The message I get is "Error_not_found (0x80070490)" when I try to install SP2
I ran SFC /Scannow and got a message that there are corrupt components and a direction to C:\Windows\Logs\CBS that has a huge file I cannot comprehend.
I also ran the "System Update Readiness Tool" prior to trying to install SP2 with no apparent effect.
I have tried various approaches to this such as running System Restore and reapplying everything with reboots in-between.
I confirmed no spyware and also disabled my antivirus program (NOD) during updates with no effect.
Has anyone else out there had a similar problem who might be able to offer advice?
Thanks,
The Hoy

Are you sure you have the proper file downloaded for your system? x86 if you are running 32bit Vista and x64 if 64bit.
Other than that, you might try to use Windows Update. Note that you need to install all updates, possibly including IE8 before Windows Update will offer you SP2.
You might also try installing all updates from Windows Update and then running your stand alone SP2 installer, to see if that solves the problem.

Windows vista error code 0x8009

I am getting this code when I go to itunes store someone please help

In over a year of installing Vista... not once.
My guess is Vista doesn't like GUID and EFI partitions in x32.
Vista x64 w/ SP1 supports installs to GUID and support for U-EFI.

Windows Installer error message when installing or removing iTunes

When I try to either upgrade, install, or remove iTunes, I get this message:
"The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if the Windows Installer is not correctly installed. Contact your support personnel for assistance."
Anyone know how I can fix this?

Microsoft have this help article on this error message;
http://support.microsoft.com/default.aspx?scid=kb;EN-US;q315346#kb1

HT1459 I keep receiving error code when installing Itunes software, I have uninstall the program & try to reinstall & receive error code 2324

I keep receiving an error code 2324 when downloading Itunes, I have uninstalled & reinstalled the program & still receive this error code?

Let's try the fixit from the following Microsoft document with that one:
Fix problems with programs that can't be installed or uninstalled

Error code when installing tom tom

Had to factory restore my 3gs yesterday and installed 4.3.1 did a restore to last backup.synced with my itunes all media and apps went on ok except my tom tom western europe 1.6. i keep getting a unknown error occured when trying to install(0xE8000004)can anyone help please....i have rebooted phone,itunes but still no joy?

Did you already try the suggestions mentioned here: "iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting" http://support.apple.com/kb/TS3221

Error Msg when installing Office for Mac 2008 on New Mac Book Pro

Why Am I getting the message "Classic environment no longer supported" when I try to install Office for Mac 2008 install on a Late 2011 Mac OS X Lion 10.7.2
Here is a screen shot:

And for what it's worth, my choice would be (and is) LibreOffice, which I've used for about a year with nearly complete satisfaction. Last time I tried it three or four years ago, OpenOffice had the ugly, unrefined appearance of a Windows application; it had no Mac interface at all. That might actually be comforting to someone coming to the Mac from Windows, but as a 27-year Mac user, I hated it. I don't know whether OO has gotten a facelift in the intervening years.
The intermediate step between OO and LO was NeoOffice, which I used for several years. It was OpenOffice with a Mac face, and I liked it well enough. LibreOffice is its further evolution, more compatible with the latest MS Office files.

Help, I get this error code when installing encore cs5 from master collection Exit Code: 6.

Hello all,
I have been having a problem installing encore cs5 into my Dell xps studio 8100. the machine is literally three days old and aside from the os, there's nothing else installed in it.
I was able to run the installation for CS5 without any issues until it got to encore. everything else installed without an issue but it refuses to install encore. I have installed the same master collection on another machine, a little older than the new dell, and it installed flawlessly. But on the new machine, no dice.
I have posted below the error msg logs i received from the install. Any help would be much appreciated please.
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 3 error(s), 8 warning(s)
WARNING: OS requirements not met for {33A3F995-8333-4676-8D6F-AB7674BB52EA}
WARNING: OS requirements not met for {565DE707-5798-4FC3-8DF6-0F58A348A9B0}
WARNING: OS requirements not met for {5DDABB74-A879-4BE7-A4C6-FD41793942DB}
WARNING: OS requirements not met for {694213D7-1E0E-4C8F-B822-E2E3680C0FCE}
WARNING: OS requirements not met for {7816FDDE-40D4-482D-AD7D-97858985DB3E}
WARNING: OS requirements not met for {AAE6F374-91CB-45FB-9282-4CFA0DED2088}
WARNING: OS requirements not met for {B8D286BC-A68D-4E74-9F68-8756A49896D8}
WARNING: Payload cannot be installed due to dependent operation failure
ERROR: The following payload errors were found during install:
ERROR: - Adobe Encore CS5_AdobeEncore5en_USLanguagePack: Install failed
ERROR: - Adobe Encore CS5: Failed due to Language Pack installation failure
FATAL ERROR: Cannot create extract assets at 'C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{D8465547-5D5B-4856-A93A-8AC0A05C5D4D}' from zip file 'D:\Adobe CS5\payloads\AdobeEncore5AllRetail\Assets1_1.zip'. Error 23 Data error (cyclic redundancy check).

Hmm... My CS5/AVCHD 1st Impressions http://forums.adobe.com/thread/652694?tstart=0 includes a link to the computer I built
My CS5 install went with no problems at all, so I'm pretty much out of ideas, other than a note I saved
Install Checklist http://forums.adobe.com/thread/569663?tstart=0

Receive following error codes when installing trial lightroom: Error 1935, 1603,

Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.7.1.0 Adobe_Lightroom_x64.msi_5.7.1 -----------
ERROR: Error 1935.An error occurred during the installation of assembly component {FF2F571A-6C54-31E3-B23E-2A60283B08A8}. HRESULT: 0x80070BC9.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1935.An error occurred during the installation of assembly component {FF2F571A-6C54-31E3-B23E-2A60283B08A8}. HRESULT: 0x80070BC9.
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603

Bobs25169074 for information on how to resolve Exit Code 7 errors please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5.

Error code when installing Premiere Elements

Hello -- I tried to install Premiere Elements 9 (haven't gotten around to it until now) and I got the following. The disk won't install and I have re-started my system twice. Both times my MacBook "spits out" the disk and I get this error message:

Could you please let us know the exact error message that you get while installing PSE 9. Also, if possible please atach the error screenshot along with the system details.
Try to copy the contents of the disk to the desktop and try installing it from there and check if that helps.

HT1926 Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes I get error messages, "unable to locate component, AVFoundationCF.dll not found," then "Error 7 (Windows error 126)

Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes, I get error messages, "unable to locate componant AVFoundationCF.dll not found," then "Error 7 Windows error 126." I have tryed to reinstall twice with the same result.

Repair Apple Application Support.
START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button

Windows vista Error code when installing on my mac

Similar Messages

Maybe you are looking for