Windows Vista Home Premium (64-bit) is slow. Which start-up services should run?

I recently had to use system restore and make a few changes to get my system running again.  Ooops. I now have a very slow computer whereas it was working fine before.  I haven't recently installed any new software or hardware and suspect that some essential start-up services may have been disabled, stopped or set to manual while some other unused services may have been set to start, automatic or automatic (delayed).
Can someone please direct me to another thread (if available) or list which start-up services should be in which state?
Thank you!
System details:
 ~ HP IQ818A 
 ~ Windows Vista Home Premium
  ~ Service Pack 1 
 ~ 4GB RAM 
 ~ 64-bit 
 ~ avast! Anti-virus is active 

Sydney,
I don't have an IQ818 at the moment, all I have is an IQ506T - from last fall.  I had just done a recovery of it.
Note:  1) I did choose to NOT perform automatic updates, 2) I haven't yet configured Norton, and 3) I haven't turned off TouchSmart from running in the background.
This isn't exactly your system, but it would be somewhat close.  Your safest bet would be to recover and start over, but here goes with the services listings.  Please note its comma delimited - you can look at it better with something like Excel, Works or Open Office.
Good luck on this.
-dm (an HP employee, but the comments/etc, are mine, not HP's)
Name,Status  ,Startup Type,,
Andrea ADI Filters Service,Started,Automatic,,
Application Experience,Started,Automatic,,
Application Information,Started,Manual,,
Application Layer Gateway Service,,Manual,,
Automatic LiveUpdate Scheduler,,Disabled,,
Background Intelligent Transfer Service,Started,Automatic (Delayed Start),,
Base Filtering Engine,Started,Automatic,,
Bluetooth Support Service,Started,Automatic,,
CalendarSynchService,Started,Automatic,,
Certificate Propagation,,Manual,,
CNG Key Isolation,Started,Manual,,
COM Host,,Manual,,
COM+ Event System,Started,Automatic,,
COM+ System Application,,Manual,,
Computer Browser,,Automatic,,
Cryptographic Services,Started,Automatic,,
DCOM Server Process Launcher,Started,Automatic,,
Desktop Window Manager Session Manager,Started,Automatic,,
DFS Replication,,Manual,,
DHCP Client,Started,Automatic,,
Diagnostic Policy Service,Started,Automatic,,
Diagnostic Service Host,,Manual,,
Diagnostic System Host,Started,Manual,,
Distributed Link Tracking Client,Started,Automatic,,
Distributed Transaction Coordinator,,Manual,,
DNS Client,Started,Automatic,,
Extensible Authentication Protocol,Started,Manual,,
Function Discovery Provider Host,Started,Manual,,
Function Discovery Resource Publication,Started,Automatic,,
GameConsoleService,,Manual,,
Group Policy Client,Started,Automatic,,
Health Key and Certificate Management,,Manual,,
HP Health Check Service,Started,Automatic (Delayed Start),,
HP Touch Screen Enhance,Started,Automatic,,
Human Interface Device Access,Started,Automatic,,
IKE and AuthIP IPsec Keying Modules,Started,Automatic,,
Interactive Services Detection,,Manual,,
Internet Connection Sharing (ICS),,Disabled,,
IP Helper,Started,Automatic,,
IPsec Policy Agent,Started,Automatic,,
KtmRm for Distributed Transaction Coordinator,Started,Automatic (Delayed Start),,
Link-Layer Topology Discovery Mapper,,Manual,,
LiveUpdate,,Manual,,
LiveUpdate Notice,Started,Automatic,,
Microsoft .NET Framework NGEN v2.0.50727_X64,,Manual,,
Microsoft .NET Framework NGEN v2.0.50727_X86,,Manual,,
Microsoft iSCSI Initiator Service,,Manual,,
Microsoft Office Diagnostics Service,,Manual
Microsoft Software Shadow Copy Provider,,Manual
Multimedia Class Scheduler,Started,Automatic
Net.Tcp Port Sharing Service,,Disabled
Netlogon,,Manual
Network Access Protection Agent,,Manual
Network Connections,Started,Manual
Network List Service,Started,Automatic
Network Location Awareness,Started,Automatic
Network Store Interface Service,Started,Automatic
NVIDIA Display Driver Service,Started,Automatic
Office Source Engine,,Manual
Parental Controls,,Manual
Peer Name Resolution Protocol,,Manual
Peer Networking Grouping,,Manual
Peer Networking Identity Manager,,Manual
Performance Counter DLL Host,,Manual,,
Performance Logs & Alerts,,Manual,,
Plug and Play,Started,Automatic,,
PnP-X IP Bus Enumerator,,Manual,,
PNRP Machine Name Publication Service,,Manual,,
Portable Device Enumerator Service,Started,Automatic,,
Print Spooler,Started,Automatic,,
Problem Reports and Solutions Control Panel Support,,Manual,,
Program Compatibility Assistant Service,Started,Automatic,,
Protected Storage,,Manual,,
Quality Windows Audio Video Experience,,Manual,,
ReadyBoost,Started,Automatic,,
Remote Access Auto Connection Manager,,Manual,,
Remote Access Connection Manager,Started,Manual,,
Remote Procedure Call (RPC),Started,Automatic,,
Remote Procedure Call (RPC) Locator,,Manual,,
Remote Registry,,Manual
Routing and Remote Access,,Disabled
Secondary Logon,Started,Automatic
Secure Socket Tunneling Protocol Service,Started,Manual
Security Accounts Manager,Started,Automatic
Security Center,Started,Automatic (Delayed Start)
Server,Started,Automatic
Shell Hardware Detection,Started,Automatic
SL UI Notification Service,,Manual
Smart Card,,Manual
Smart Card Removal Policy,,Manual
SNMP Trap,,Manual
Software Licensing,Started,Automatic
SSDP Discovery,Started,Manual
Superfetch,Started,Automatic
Symantec Core LC,,Manual
Symantec Event Manager,Started,Automatic
Symantec Lic NetConnect service,Started,Automatic
Symantec Settings Manager,Started,Automatic
System Event Notification Service,Started,Automatic
Tablet PC Input Service,Started,Automatic
Task Scheduler,Started,Automatic
TCP/IP NetBIOS Helper,Started,Automatic
Telephony,Started,Manual
Terminal Services,Started,Automatic
Terminal Services Configuration,,Manual
Themes,Started,Automatic
Thread Ordering Server,,Manual
TPM Base Services,,Automatic (Delayed Start)
UPnP Device Host,Started,Automatic
User Profile Service,Started,Automatic
Virtual Disk,,Manual
Volume Shadow Copy,,Manual,,
WebClient,Started,Automatic,,
Windows Audio,Started,Automatic,,
Windows Audio Endpoint Builder,Started,Automatic,,
Windows Backup,,Manual,,
Windows CardSpace,,Manual,,
Windows Color System,,Manual,,
Windows Connect Now - Config Registrar,,Manual,,
Windows Defender,Started,Automatic,,
Windows Driver Foundation - User-mode Driver Framework,Started,Automatic,,
Windows Error Reporting Service,Started,Automatic,,
Windows Event Collector,,Manual,,
Windows Event Log,Started,Automatic,,
Windows Firewall,Started,Automatic,,
Windows Image Acquisition (WIA),Started,Automatic,,
Windows Installer,,Manual,,
Windows Management Instrumentation,Started,Automatic,,
Windows Media Center Extender Service,,Disabled,,
Windows Media Center Receiver Service,,Manual,,
Windows Media Center Scheduler Service,,Manual,,
Windows Media Center Service Launcher,,Automatic (Delayed Start),,
Windows Media Player Network Sharing Service,,Manual,,
Windows Modules Installer,,Manual,,
Windows Presentation Foundation Font Cache 3.0.0.0,Started,Manual,,
Windows Remote Management (WS-Management),,Manual,,
Windows Search,Started,Automatic,,
Windows Time,Started,Automatic,,
Windows Update,Started,Automatic (Delayed Start),,
WinHTTP Web Proxy Auto-Discovery Service,Started,Manual,,
Wired AutoConfig,,Manual,,
WLAN AutoConfig,Started,Automatic,,
WMI Performance Adapter,,Manual,,
Workstation,Started,Automatic
-DM (HP Retiree)
NOTE: If this helps you or solved your problem - please say thanks by clicking the white kudos star on the left.
If you think this would also help others, please mark 'Accept as Solution' to help them find it easier.

Similar Messages

  • Cannot install itunes 11.1.3 to my windows vista home premium 32-bit.  After it finishes the download that it verifies the file I get a message saying "this file cannot be downloaded". What could the problem be??? I uninstalled my itunes and tried again

    Cannot install itunes 11.1.3 to my windows vista home premium 32-bit.  After it finishes the download that it verifies the file I get a message saying "this file cannot be downloaded". What could the problem be??? I uninstalled my itunes and tried again and keep getting the same message.  Please help !

    See Troubleshooting issues with iTunes for Windows updates.
    For downloading issues see the further information area and use a different browser and/or the direct links.
    tt2

  • Replacing Motherboard on HP Media Center PC running Windows Vista Home Premium (32-bit)

    Running OEM version of Windows Vista Home Premium (32-bit) on an HP Pavilion Media Center m8226x Desktop PC.  Replacing motherboard ASUS M2N68-LA Motherboard 6150SE HP Narra2-GL8E with an MCP61PM-HM (Nettle2) motherboard due to failure.  Both boards have same chipset and form factor.  Can I just replace board without reinstalling windows?  Do I need to install new drivers?  I don't have an install CD or install key, would Microsoft provide a key if needed?  Is there a link I can reference for MB replacement/ install? 
    Thanks for you assistance!
    HC
    This question was solved.
    View Solution.

    The OEM license is tied to the original motherboard version, ie M2N68-LA. You lose the OEM "rights" when you changed the board.
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • Installation of oracle 10gR2 on Windows Vista Home Premium 64 bit OS

    can we install oracle 10gR2 on Windows Vista Home Premium 64 bit OS ???
    While doing sqlplus from command prompt,
    it's giving error like
    'SP2-1503 Unable to initialise Oracle Call interface'
    'SP2-0152 Oracle may not be functioning Properly'
    How to troubleshoot the above errors,
    Has anybody tried it ???
    Plz assist.

    No Oracle product is certified against any Windows Home OS.
    As Vista was released after Oracle 10gR2, 10gR2 is not certified against any edition of Vista.
    You need to downgrade to XP, or install Linux.
    Sybrand Bakker
    Senior Oracle DBA

  • Tx2517ca From Windows Vista Home Premium 32-bit to Windows 7 Professional 32-bit

    Hi Everyone,
    I have a very specific question. I currently am running Windows Vista Home Premium 32-bit, but I want to use Windows 7. However, I want to use Windows 7 Professional 32-bit (rather than Windows 7 Home Premium) and understand that this will require a clean install.
    Before I purchase Windows 7 Professional, I want to make sure that this can be done correctly. Does anyone know if this is possible or have already done this?
    I have downloaded and ran Windows 7 Upgrade Advisor which told me that I would be able to upgrade to Windows 7 Home Premium or Ultimate, but it does not mention Windows 7 Professional at all. I'm assuming this is because it would require a clean install.
    Thanks for your time,
    Lauren

    thanks ... I see now from your other post that you're probably getting either a "missing QuickTime.msi" message or being told that a "newer version of QuickTime" is installed when you try to go ahead and uninstall QuickTime after you're told about the Key?
    Unfortunately, these sorts of msi-related troubles have gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
    Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly this time?
    (If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

  • Itunes wont install on my windows vista home premium 32-bit computer

    on my windows vista home premium dell inpsiron 32-bit computer when it installes at the end it says rolling back action

    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • Nvidia GeoForce Go 7600 graphics driver and IQ770 with Windows Vista Home Premium 32 bit edition

    I have been having problems with my screen for several months now:  every so often, for no apparent reason, it loses some of the pixels.  I can still read the items on the screen, but the resolution is trashed.  It happens intermittently and then goes back to normal.  I have tried uninstalling the graphics driver and letting the computer go find it on a reboot.  This does not work.  I have also tried installing the original graphics driver.  This does not work either.
    If I look in the "Problem Reports" area in Control Panel, there is a graphics related error: 
    Error Message: STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER (Q293078)  The resolution listed is to reinstall the device driver (which I've tried dozens of times without success) or to change the computer's performance settings, which also does nothing.  I still get the occasional loss of screen clarity which returns to normal all by itself.
    Is anyone else seeing this problem?  Does anyone have a resolution?
    I have tried the latest graphics driver available on the hp website, from 8-2008 as well as the originally installed version from January 2007.  The version of Windows is Vista Home Premium 32 bit edition, Service Pack 1.
    If I completely uninstall the graphics driver, and do not reload any, the screen performance is fine, but then there are other problems, such as graphics acceleration.
    Thanks for your help.

    For the IQ700 series
    If you're running Windows Vista SP2, there is a patch for USB patch for NVIDIA chipsets
    http://support.microsoft.com/kb/975163/ 
    If you're running Windows 7, install this patch
    http://h30434.www3.hp.com/t5/Lockups-Freezes-Hangs/Driver-update-for-Win7-USB-issue-on-nVidia-chipse...
    And only use the driver from the system manufacturer's website or Windows Update. Do not use the latest drivers from NVIDIA's website for the IQ700 series

  • Hp pavillion a6500f product#KQ495AA-ABA windows vista - home premium 64 bit Won't boot

    Hi - I cannot boot my desktop hp pavillion.  error message says put in an installation disk - don't have.  and also says file 32/boot missing or corrupt.  tried recovery group of three disks but doesn't do a thing????  Don't want to loose data what is best route to take?  thanks

    Hi xbill,
    What is the exact message you have?
    So far I understand you have a corrupted windows vista with an error message mentioning a missing or corrupted somthing32 file.
    Your data should not be impacted at the moment (based on what you wrote).
    What you may want to do at the moment is get a windows vista home premium 64 as it may be used to recover the missing/corrupted file(s).
    An external hard drive to backup your files and finally a bootable CD to allow you to start your machine to backup your files.
    But the first thing we need before we go any further is the exact error message.
    Cheers,
    Service is the lifeblood of any organization.
    Everything flows from it and is nourished by it.
    Customer Service is not a department... It's an attitude

  • Satellite A350D-005- Windows Vista Home Premium 64 Bit and Burning

    Hi. I recently purchased a Toshiba Satellite A350D (PSALEC-005004). It has a 64 bit processor running vista home premium 64 bit. I have never been able to successfully burn a cd or a dvd. I have tried nero 7, 8 and 9, along with Roxio Easy Media Creator 10, along with a few other various software. Nero ends up in it haulting around 10%, then eventually saying that the burning process has failed, resulting in me either having to turn the computer off to remove the wasted disc or if im using my external burner i have to turn it off then back on. When I use Roxio it seems like its going to burn until the end, where it seems to hault again. What am I doing wrong or what can I do to fix this problem?

    Okay, I tried burning a CD and DVD using Vista's built-in software, and it says this after attempting: "There was an error burning the disc. The disc may no longer be usable." I have no clue as to why the computer will not let me burn using any program. I have tried using my external Sony DVD burner that works on my 32 bit system, and it wont work on this 64 bit machine either. Any suggestions as what to try next?
    Also, whenever it decides to quit burning, the burner seems to keep going and wont stop unless I shut the computer off (for the internal burner) or Turn off the power to the external burner. It also disappears from the list under the "Computer (My Computer)" section.
    Message Edited by ATVDrtBikeDemon on 02-14-2009 02:27 PM

  • Windows vista home premium (64 bit)

    desktop icons keep changes when restarted the computer ......how do I stop this
    I have checked setting  in view and Algin to desktop and show icons on destop and medium is the only thing checked and it put all icons on the left side of deastop in 2 or 3 rows when I restart computer. and I have to set them back up again.....Can someone plese help...do not know what to do

    You might want to change the alignment to grid, see here
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • Completely uninstall Quicktime Pro 7 for Windows Vista Home Premium 32 bit

    I am trying to uninstall my Quicktime Pro 7 registration, and to not ever see it again in control panel (classic view).
    Unfortunately, there is a visible registrationcode shown for Quicktime Pro 7(somehow, it simply detected that I had Final Cut Pro installed at one point and automatically registered).
    I cannot figure out how delete Quicktime Pro, via the control panel and registry, and make it go away. Please advise.

    thanks ... I see now from your other post that you're probably getting either a "missing QuickTime.msi" message or being told that a "newer version of QuickTime" is installed when you try to go ahead and uninstall QuickTime after you're told about the Key?
    Unfortunately, these sorts of msi-related troubles have gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
    Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly this time?
    (If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

  • I can't put my installation DVD's into a usb drive to reinstall windows vista home premium 64 bit

    I just order{for the second time} , a set of 2 DVD's  system recovery ,for my pavilion dv 9920 us entertainment notebook, since my comp has a broken dvd rom, I tried to put the disks into a 16 gb flash drive, I was unable to do it, so I tought that the dvd's were damaged, so I ordered a second set, to discover that whit the second set it was olso impossible. I followed all the directions from the home page of HP to copy my dvd's , but only get "frustration". I greatly appreciate your help .Thanks

    I just order{for the second time} , a set of 2 DVD's  system recovery ,for my pavilion dv 9920 us entertainment notebook, since my comp has a broken dvd rom, I tried to put the disks into a 16 gb flash drive, I was unable to do it, so I tought that the dvd's were damaged, so I ordered a second set, to discover that whit the second set it was olso impossible. I followed all the directions from the home page of HP to copy my dvd's , but only get "frustration". I greatly appreciate your help .Thanks

  • Itunes won't open Windows Vista Home Premium 32 bit

    Today I bought an Itouch 8GB. I downloaded iTunes to get the latest greatest version. I ran the program and agreed to everything, took all the defaults. However when I launch it I get nothing. Just an hourglass and then nothing.
    I did a system restore to an earlier date and tried again, same result.

    EUREKA!
    Reading the bowls of the post just below, It said to make sure shockwave was enabled. It wasn't!! I enabaled it and tried my web sites and things worked fine.
    Thanks to those that post helpful answers

  • Unable to install iTunes 8.1.1 for windows vista home premium 32 bit

    When program is installing from version 7.3, a message comes up stating I have a newer version of QuickTime which is impossible. Having purchased a new iPod Nano I cannot use it because iTunes 8.1.1 has not worked out bugs, or so it seems, to download it successfully. If anyone has had this happen and figured out what the problem is, I would love to read your answer.
    Message was edited by: [email protected]

    Hi,
    Yes, I have followed the troubleshooting tips in the following article http://support.apple.com/kb/HT1926.
    I still had the issue after removing the application and cleaning up the installer files on my computer.
    Two weeks ago I spoke with Apple technical support. We were unable to come to any conclusion as to any reason why the computer states there is a newer version of QuickTime.
    Quite frustrating having purchased an iPod Nano.

  • Trying to download on windows 7 home premium 64 bit, goes to temp file but will not run , why?

    downlaoads first, then second screen says let program make changes, yes then, extracts, but the stops nothing happens no setup screen

    Haven't got a solution, but want to see if I've got same problem- got 9300; windows 7 (tried download on both ultimate and premium)- keeps saying download unsafe- currpted

Maybe you are looking for

  • Apple TV Streaming Performance Seriously Degraded

    I wish Apple would acknowledge there was a problem.  In the past two weeks or so the performance of the Apple servers streaming TV shows has seriously degraded.  There have been no changes in my set up and speed tests show 20-30 Mbps download speed a

  • Federation and contact details

    Hi, When I federate between jabber for windows/cups and gmail or another jabber/cups organization no contact details are passed through. Is there an option to pass at least the full name and phone numbers? Regards, Erik Sent from Cisco Technical Supp

  • Bex Query Multiprovider: restrict same characteristic for different Infoproviders

    HI SAP Guru's I have scenario here where the multiprovider is made up of 3 DSO .....i have a infoobject 0CRM_OBJ_ID(transaction Number) in two DSO and i want to display both values in separate rows as AMC Number and Service order Number in the query

  • Unable to view flow in Workflow builder

    Hi, I have created a process flow in OWB904 and deployed it to workflow repository. The flow runs ok from OWB and from SqlPlus. When I try to connect to workflow repository from workflow builder (2.6.1.5.2), I get the following error: WFLDRL_FAIL WFL

  • Adding cloud to a picture

    Hi, I am new to photo shop 9 elements and am getting on with it quite well. However I have some pictures of aircraft with a white sky back ground. I therefore would like to add cloud. I cannot seem to grasp how to do this. Can anyone please help? Pet