Windows Vista laptop not visible on aiport extreme network

I run an airport extreme network with a MACPRO 10.6 and a windows Vista laptop. The windows machine and its files folders does not show up in my shared devices all the time. How can I make it visible all the time and access its files printers etc.
Thanks

Although not the exact versions that you may be running, try reviewing this excellent iFelix support page to see if it will help.

Similar Messages

  • TS3212 I installed an iTunes update on my Windows Vista Laptop and iTunes wouldn't start saying it was missing MSVCR80.dll, now when I start Outlook it is going on about a mobileme error? Any advice? I'm tempted to not use iTunes ever again.

    I installed an iTunes update on my Windows Vista Laptop and iTunes wouldn't start saying it was missing MSVCR80.dll, now when I start Outlook it is going on about a mobileme error? Any advice? I'm tempted to not use iTunes ever again.

    Troubleshooting issues with iTunes for Windows updates - MSVCR80

  • Trying to download iTunes on my husband's windows vista laptop and we keep getting error messages that say error z, apple application support was not found, windows error 2. Tried 2 different browsers and it still would not work. Can you help? Thank you.

    Trying to download iTunes on my husband' s windows vista laptop. Have tried 2 different browsers and it almost finishes the download process and we get error messages that say "error z, apple application was not found, windows error 2" Can you help? Thank you.

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • ITunes error when launching with Windows Vista Laptop

    The iTunes application could not be opened. You do not have enough access privileges for this operation. How do I resolve this. I reinstalled, I checked permissions for my account, and I checked permissions for the folders. I am using a Windows Vista laptop.

    Hello,
    Multisim 10.0.1 is compatible with Windows Vista, and this is a free update. Go to the Drivers and Updates page, and select your edition (Student, Educational, Power Pro).  
    Regards,
    Fernando D.
    National Instruments

  • How do i connect my windows vista laptop to iPhone personal hotspot? Will it still work if my laptop doesnt have iTunes installed?

    I am currently using iPhone 4 and windows vista laptop. i cant seem to get my windows vista laptop to connect to the personal hotspot on my iPhone using USB. Is it because iTunes is not installed in my windows vista laptop?
    I have tried it on a MacBook Pro and it works perfectly fine.

    when you switch your hotspot on your phone you will see a user password - when you switch your laptop on and search for your iphone connect and you will be asked for the user password once you enter it and click connect you will link the two devices and they will work together as long as you have a good signal and good data allowance you shouldn't have any issues

  • I allowed itunes to up date my version and now i cannot open itunes on my windows vista laptop

    I allowed itunes to update my version and now itunes will not open on my windows vista laptop

    i get an error message that itunes did not install correctly.
    What's the precise text of that error message please? (There's a few different ones I can think of that you might be getting.)

  • Windows Vista: Laptop: it won't resume updateting 3.6.3.....

    the last Firefox update on my Windows Vista laptop quit half way. When I click to resume as it asks in the menu, the downloading update next menu says "connecting to the update server" but it doesn't do a thing.
    thanks,

    See:
    * [[Software Update Failed]]
    * http://kb.mozillazine.org/Software_Update (Software Update not working properly)
    Remove the files in the updates and updates\0 folder:
    C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
    (%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox\updates)

  • Lightroom6 instalation rejects installation on Windows 7 with remark that windows vista is not supported

    I tried to install Lightroom 6 on my Windows 7 System
    The installer jejects the Installation with the remark that Windows Vista is not supported by this product
    Is that Problem known? Is any solution available?

    Hi Michael,
    You can follow the article: How to troubleshoot issues that may prevent a program from being installed correctly on a Windows Vista-based computer and check whether the installer is running in Compatible Mode or not.
    If the check box for Compatibility Mode is checked and simply UnCheck it and click Apply.
    Run the installer and again and check if it still gives you any error message.
    Let us know if it works or not.
    Thanks,
    Ratandeep Arora

  • I am trying to re load itunes onto a Compaq (Windows Vista) laptop. I keep getting an error message "Runtime error! Program: C\Program files|itunes|itunes.exe. R6034. An application has made an attempt to load the C runtime library inccorectly." Help!

    I am trying to re load itunes on to a Compaq (Windows Vista) laptop. I keep getting an error message "Run time error!. Program C:\Program files\itunes\itunes.exe. R6034. An application has made an attempt to load the C runtime library incorrectly" What can I do?

    Hello, Max230506. 
    Thank you for visiting Apple Support Communities.
    Here are the steps I would recommend going through as they should resolve the issue.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    Jason H.

  • Got the following message when trying to install Photoshop CC "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms." I use Windows Vista so not sure what I need to

    Hi there
    I got the following message when trying to install Photoshop CC, "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms."
    I use Windows Vista so not sure what I need to do now! Any help would be much appreciated thanks.

    Photoshop CC only runs on Windows 7 or Windows 8/8.1. Not Vista.
    System requirements | Photoshop

  • Windows Vista does not see my Ipad but it always did prior to this attempt

    Windows Vista does not see my Ipad, this is a new problem and I have not made any major changes to either my computer or to my Ipad.  I am running Vista 64 as an operating system.  I get the message that windows has an unrecognized USB device.  I checked to see if the Apple Mobility software is running and it was, I reset it, turned off the computer, soft reset the Ipad but still no luck.

    Hi,
    Can you try a different USB port?
    Check out this link just in case.
    http://support.apple.com/kb/HT4049
    Carolyn :-)

  • Windows vista do not start

    Windows vista do not start.  
    I have tried starting in the different safe mode, none works (after the loading bar it all just becomes black), also tried start repair it just says that start repair can not fix the error.  I have check if I could restore it to a previus state when it work, but it seems like it hasnt save any for some reason. . I have done diagnostic test on the hardware and everything seems to be fine.  Probably some virus.
    Can I still reinstall the windows without overwriting every personal file?   I can not see any option of just reinstall the window only, not the the hardrive.  Can I do this in bios maybe? To me you should be able to reinstall just windows and nothing else. It is ok, if the the virus is still there after I have reinstall just windows, what I want to do is save some files, so if I can only come in the computer for 5 min, that is all I need.
    I have read that you maybe can save files with  downloading linux and load the computer with that to get access to the files. But I do not have a seperat computer with dvd or  usb stick. All things can be fix, but it will both cost money and is a little bit of a hassel, for something then maybe not even work in the end.

    Your options a limited here.
    Should you wish to save your files you will have to put the hard drive in an external hard drive caddy and plug it into the USB port of another computer to transfer your files.
    Once done, put the hard drive back into your computer and perform a factory restore which will return your computer to it's original state as when you got it.  You will have to reinstall your programs and data files.
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • I can't install I-Tunes 10.6.1.7 on my Windows Vista laptop. Tried it several times. First message: Policy 8.0 Microsoft VC80.CRT..type='win32-policy, etc. Please help

    I can't install I-Tunes 10.6.1.7 on my Windows Vista laptop. Tried it several times. First message: Policy 8.0 Microsoft VC80.CRT..type='win32-policy, etc. Please help

    I can't install I-Tunes 10.6.1.7 on my Windows Vista laptop. Tried it several times. First message: Policy 8.0 Microsoft VC80.CRT..type='win32-policy, etc. Please help

  • Elements Premiere wont open on my windows vista laptop. elements 11 opens fine Came with Nikon D3200 purchase. Download from disk confirmed as OK It is on my desktop and in my program file.

    Why wont Premiere Elements 11 open on my windows vista laptop ???The elements 11 opens perfectly. Download confirmed as good.  Barry.

    Troubleshoot damaged projects | Adobe Premiere Elements

  • Difficulty connecting Mac Mini and Windows Vista laptop

    I have a Windows Vista laptop. I have been connecting to the Internet via a wireless DSL router. I just purchased a Mac Mini and want to hardwire the Mac Mini to the router and also create a home newtork where the Mac Mini can transfer files to and from the Vista laptop and vice versa.
    What is the best way to do this? Could you please provide detailed information as well? I don't have a lot of experience with computers or networking.
    Thank you!

    Hi Bruce!
    What you're wanting to do is very possible and is done often. However, please search Apple's website or Google first or search this forum for answers to your question. They've been asked and answered multiple times.
    If you have problems with some of the steps then definitely post back and folks in this forum will be glad to help you get over those hurdles. We're users just like you but our time and efforts aren't unlimited.
    For starters, I'll point you to these excellent pages by iFelix <http://www.ifelix.co.uk/tech/windowsxp.html>.
    Good luck!
    bill

Maybe you are looking for

  • Upgrading mid month

    How is upgrading to a higher package mid month handled. Lets say im on a $29 package and half way through the month i decide to upgrade, do i start the new monthly subscription from that date and essentially forfeit the other half of my subscription.

  • I Can't open Any kind of images in Photoshop CC

    i will try to get strait to the point. I can't open transparent files or pictures in general and when i try to open such thing a pop up comes up saying "could not complete your request because it is not the right kind of document" I'm not sure why th

  • Can't continue to debug after changing into a class (11.1.2 )

    Hi, Some strange behavior after upgrade to 11.1.2 - Run an ADF faces application in debug mode - Do a change (add a blank line) inside a class and build only this class - Now on any click in the site I have an exception and I need to redeploy all the

  • Apple Maps App problem - maps problem - why do they go blank

    On OS X Yosemite version 10.10.3 I have a blank map, and this problem occurred on the last version of OS as well. After I restarted my computer, the app started working but went blank again. When the map is blank, I can't report the problem. It says

  • Authorization in appraisal system

    Hi Exports, I am trying to maintain the authorzation in appraisal system. Is that possible to control the access according to different appraisal models? how could i do that? Thanks, Liang