Windows Vista not working correctly with Leopard 10.5

I just updated my MacBook Pro 17" by installing Leopard 10.5xx (erased and installed), then used BootCamp to partition disk and install Windows Vista. In Windows, my volume control is on, but no sound. I just got the error, "This problem was caused by a compatibility issue between Intel 82801GBM (ICH7-M) LPC Interface Controller - 27B9 and Windows Vista. Intel 82801GBM (ICH7-M) LPC Interface Controller - 27B9 was created by Intel Corporation and is distributed by Apple Inc.."
I am having problems with drivers, and as I'm a new user to Mac/Windows, so I don't even know how to identify which drivers (on Leopard installation disk)I need. In Windows Device Manager I have something called "Human Interface" that needs a driver . . . but my computer can't find it on my Mac or on the disk.
I purchased extended AppleCare warranty, but don't know how to use it, and my 90 days is up so I can't call. Is this warranty strictly for hardware? I don't understand how to get the support/how to information I need; I'm a Windows user and find Apple's support confusing and indirect.
HELP!!!

sorry, can't help, but you're definitely in the wrong forum. this is about mac os SERVER (not client) and your problem is related to either the hwardware you use or bootcamp.
br,
günther

Similar Messages

Is prompted filter not working correctly with calculated items

Hello,
I am working on OBIEE 11.1.1.3 and having problem problem linking 2 analisys with action link
The test case is:
I have 2 attribute columns on a dimension
1. Conto 1 Code
2. Conto 1 Dsc (in RPD i set up the property Descritor ID of -> Conto 1 Code)
3. Conto 2 Code
4. Conto 2 Dsc (in RPD i set up the property Descritor ID of -> Conto 2 Code)
5. Conto Detail
and 1 measure on the fact table
1. Revenue (defined on RPD as simple sum)
On presentation layer i have the analisys:
1.
The First one using as Criteria: Conto 1 Dsc | Conto 2 Dsc | Revenue
The layout is a table with sub-total on Conto 1 Dsc
On Revenue i created an action link to the second analisys containing
2.
Criteria: Conto 1 Dsc | Conto 2 Dsc | Conto Detail | Revenue
Filters: Conto 1 Code (is prompted) | Conto 2 Code (is prompted)
This pair of analisys are working fine.
Then i created a second pair of analisys as:
1.
Criteria: Conto 2 Dsc | Revenue
Using Calculated group \ Items i created a numerous set of sub-totals
On Revenue i created an action link to the second analisys containing
2.
Criteria: Conto 2 Dsc | Conto Detail | Revenue
Filters: Conto 2 Code (is prompted)
This pair of analisys are not working correctly. When i drill from first analisys to second one the Conto 2 Code filter is not used.
Replacing in the second analisys Conto 2 Code (is prompted) with Conto 2 Dsc (is prompted) a filter is being generated on the drill but it's using the Conto 2 Code value and the analisys ends with no results.
Thanks,
Jonni

Try adding Conto 2 code to the first analysis and keep the filter on the second analysis as Conto 2 code is prompted.
-Amith.

Why is my Microsoft Word document not working correctly with Pages

I have created a new CV (Resume) in Microsoft Word on my work computer, it is using the latest version of Office. When I attempted to open the document in Pages on my home Mac, the formatting was slightly incorrect, but the main issue is it is missing two pages! The exact same document when opened in Word has three pages but in Pages, it only has one! I have had nothing but problems with Pages since I bought it! Can someone please help me get Pages to work correctly with my documents that are created in Word! Than you.

Pages does not allow a single cell in a table to span more than a page and there may be other problems that you also have not told us about.
Redo your CV using the excellent Pages templates, Word's templates are Uuuugly!
Being text based, with good typographical layout, those Pages templates should translate accurately back and forth from Pages to Word.
Frankly CVs don't require anything fancy. You could do an excellent, well laid out and very attractive CV in TextEdit which is no slouch in the word processing department.
Peter
PS Start off by saving your Word CV to .rtf or .txt which will strip off most of the bad formatting. Then reopen it in Pages or drag in the snippets of text into a Pages CV template's placeholders to automatically format the text nicely.

LR 2.1 & 2.0 ~ DRAG & DROP not working correctly with photos when moving, applying keywords

Today this issue started, originally in 2.0, updated to 2.1 and issue continues.
Issue: DRAG & DROP feature with mouse (or pad on laptop) will select multiple photos, (with CTRL & SHIFT key as typical with Windows machines)but when I try to move them to a different folder, or drop them onto a keyword, it will not work.
Specifically, I select two photos to move to a different folder, the selection work, but when I try to "grab" the selected photos, Lightroom defaults to One Photo, and it will not grab it to move it. However, I can "right click" on the intended folder and can select "move selected photos to folder" and that works. This issue also applys to assigning keywords, and I would assume other similiar actions. I should note, that I can "rotate", assign "labels", "stars", and Keywords from Keyword sets, it just happens with the "Drag & Drop" feature.
Help
The feature works correctly in other Windows programs, so I'm sure it's related to Lightroom and not the mouse.
I have a Windows Vista machine, 3GB RAM 160GB HD, ~ 75% free space, AMD Turion X2 Dual Core 70 Processor. Everything has worked fine up until this morning.
Prior to upgrading to 2.1, I optimized my Catalogue. Everything seems to work fine except this feature.
Help

Drag by the actual image area of the thumbnail, not the surrounding 'fake slide' cell.
That's a feature of Lightroom's grid view. Clicking on image area of thumbnail keeps the multiple selection and makes the image clicked the primary select. Clicking on the outer thumbnail area deselects all but the active image.

ORACLE EXPRESS EDITION ON WINDOWS VISTA NOT WORKING

I HAVE WINDOWS VISTA AND I TRIED TO INSTALL ORACLE EXPRESS EDITION.WHEN I GO TO THE DATABASE HOME PAGE IT GOES TO THE FOLLOWING URL
http://127.0.0.1:8080/apex
AND IN INTERNET EXPLORER I GET THE FOLLOWING ERROR
Internet Explorer cannot display the webpage
What you can try:
Diagnose Connection Problems
ALSO I WAS READING THE
"APEX" INSTALLATION HELP AT THE FOLLOWING URL
http://www.apex-blog.com/oracle-apex/installing-apex-tutorial-23.html
I AM NOT SURE IT WILL HELP ME OR NOT.I JUST NEED THE ORACLE DB WORKING AT MY SYSTEM SO THAT I CAN HAVE A LITTLE DATABASE WORKING LOCALLY.
SO ANY HELP IN THIS MATTER WILL BE APPRECIATED.THANKS

To check if u installed correctly, in cmd prompt type tnsping xe. If installed correctly it shud say OK(30) else it will show an error. Now if it says OK, in cmd prompt type sqlplus and connect using system/pwd_u_provided_durin_installation, it shud connect.
Some steps to follow before installing XE
Before Installing Oracle,make sure to disable all the network adapters and ping in cmd prompt localhost and ur machine name, both shud refer to 127.0.0.1. Once oracle is installed,try to connect in ur web explorer and once connected,enable the network adapters. There shudnt be any firewall prob.,if it does add port 8080 as an exception to ur firewall list.
Edited by: user7361177 on Jul 31, 2009 10:58 AM

System Events not working correctly with Acrobat Professional

Hey Guys, I have a script that I have written that automatically enables security settings on a PDF through Acrobat Professional. Because of Acrobats poor scriptability I am forced into doing much though System Events.
This is not a major problem... however when activating some settings in the security settings, often warning Alert dialog boxes appear when you tell System Events to enable particular settings. These Alerts do not have a title... The only way I have been able to get the script to deal with them is with the following code:
if title of front window is "" then
    tell front window
        click button "OK"
    end tell
end if
I guess this is an ok solution... bit hard to identify windows when they don't have titles...
BUT this is not my main problem. The main problem is that the script gets to one of these alert dialog boxes and just sits there... It sits there for like 10 seconds and then it performs the "click button "OK"" command.
This is a problem as there are like 3 of these instances and it really adds up. Can anybody help me... I am using Acrobat Professional 8.2.0 and the entire code is:
tell application "System Events"
    try
        tell process "Acrobat"
            -- Enable security settings
            click menu item "Properties..." of menu "File" of menu bar item "File" of menu bar 1
            tell window "Document Properties"
                tell tab group 1
                    click radio button "Security"
                    tell group "Document Security"
                        click pop up button 1
                        click menu item 2 of menu 1 of pop up button 1
                    end tell
                end tell
            end tell
            tell window "Password Security - Settings"
                click pop up button 1
                click menu item 4 of menu 1 of pop up button 1
                tell group "Permissions"
                    click checkbox "Restrict editing and printing of the document. A password will be required in order to change these permission settings."
                    click text field 1
                    keystroke pdfPassword
                    click pop up button 1
                    click menu item 2 of menu 1 of pop up button 1
                    click pop up button 2
                    click menu item 4 of menu 1 of pop up button 2
                end tell
                click button "OK"
            end tell
            if title of front window is "" then
                tell front window
                    click checkbox 1
                    click button "OK"
                end tell
            end if
            tell window "Adobe Acrobat - Confirm Permissions Password"
                click text field 1
                keystroke pdfPassword
                click button "OK"
            end tell
            if title of front window is "" then
                tell front window
                    click checkbox 1
                    click button "OK"
                end tell
            end if
            tell window "Document Properties"
                click button "OK"
            end tell
end tell
    on error
        display alert "System Events was unable to Enable Commenting. This may be because Acrobat has modified its menu system. Please contact your system administrator."
    end try
end tell
A delay does not work... its like as soon as I click the "OK" button it stalls for 10 seconds or does not know that is meant to continue... because I did this:
tell window "Password Security - Settings"
    click button "OK"
end tell
beep
In this situation it still takes like 10 seconds for the beep to occur after the click button "OK" command.

Hey Guys, I have a script that I have written that automatically enables security settings on a PDF through Acrobat Professional. Because of Acrobats poor scriptability I am forced into doing much though System Events.
This is not a major problem... however when activating some settings in the security settings, often warning Alert dialog boxes appear when you tell System Events to enable particular settings. These Alerts do not have a title... The only way I have been able to get the script to deal with them is with the following code:
if title of front window is "" then
    tell front window
        click button "OK"
    end tell
end if
I guess this is an ok solution... bit hard to identify windows when they don't have titles...
BUT this is not my main problem. The main problem is that the script gets to one of these alert dialog boxes and just sits there... It sits there for like 10 seconds and then it performs the "click button "OK"" command.
This is a problem as there are like 3 of these instances and it really adds up. Can anybody help me... I am using Acrobat Professional 8.2.0 and the entire code is:
tell application "System Events"
    try
        tell process "Acrobat"
            -- Enable security settings
            click menu item "Properties..." of menu "File" of menu bar item "File" of menu bar 1
            tell window "Document Properties"
                tell tab group 1
                    click radio button "Security"
                    tell group "Document Security"
                        click pop up button 1
                        click menu item 2 of menu 1 of pop up button 1
                    end tell
                end tell
            end tell
            tell window "Password Security - Settings"
                click pop up button 1
                click menu item 4 of menu 1 of pop up button 1
                tell group "Permissions"
                    click checkbox "Restrict editing and printing of the document. A password will be required in order to change these permission settings."
                    click text field 1
                    keystroke pdfPassword
                    click pop up button 1
                    click menu item 2 of menu 1 of pop up button 1
                    click pop up button 2
                    click menu item 4 of menu 1 of pop up button 2
                end tell
                click button "OK"
            end tell
            if title of front window is "" then
                tell front window
                    click checkbox 1
                    click button "OK"
                end tell
            end if
            tell window "Adobe Acrobat - Confirm Permissions Password"
                click text field 1
                keystroke pdfPassword
                click button "OK"
            end tell
            if title of front window is "" then
                tell front window
                    click checkbox 1
                    click button "OK"
                end tell
            end if
            tell window "Document Properties"
                click button "OK"
            end tell
end tell
    on error
        display alert "System Events was unable to Enable Commenting. This may be because Acrobat has modified its menu system. Please contact your system administrator."
    end try
end tell
A delay does not work... its like as soon as I click the "OK" button it stalls for 10 seconds or does not know that is meant to continue... because I did this:
tell window "Password Security - Settings"
    click button "OK"
end tell
beep
In this situation it still takes like 10 seconds for the beep to occur after the click button "OK" command.

Keyboard backlight not working correctly after leopard update

My mbp originally came with Tiger (10.4), when Leopard (10.5) was released I updated. The backlight for the keyboard works normally until I installed the 10.5.1 update. After 10.5.1 and all other updates the keyboard backlight no longer worked correctly. In low light conditions or while working in the dark I have to manually turn it on instead of it doing it automatically. Is this a bug or is there a way to fix it?

Yes, I have to cover the sensors with my hands in order for them to turn off when light is back on, otherwise they just stay on.

Bluetooth does not work correctly with Siemens Tek Connect headphone device

I hopefully tried the new bluetooth support in OS 3.0, but it does not work with my Siemens Tek Connect headphone device. It syncs as expected, but no sound is heard. I can choose the Tek Connect in the music app and other programs, my headphone (actually my two hearing aids, which are connected wireless with ear to ear communications (e2e) via the Tek Connect necklace device) signals the connection to me (a beep), but nothing is heard. Codec problem?
Andreas

I own Phonak hearing aids with their Bluetooth-capable iCom device which allows my aids to be used as a phone headset and also supports the A2DP stereo bluetooth profile. My iPod Touch 2Gen 32GB is able to play to my hearing aids properly.
One thing I noticed is that the iPod does not allow you to control the volume when using Bluetooth. It expects the headphones to be able to control the volume. Have you used your hearing aids as Bluetooth headphones on any other device? Maybe the device isn't programmed properly to set the volume while in headphones mode. I know my audiologist had to program the volume on each mode separately on my device.
My MacBook Pro is able to play music over Bluetooth to my hearing aids fine. But I have never gotten Windows to work properly sending audio to my hearing aids. Do you have a Mac with Bluetooth? Try to get that working to see if it's your hearing aid device that's causing the trouble or not.

How come my dvd studio pro 3 is not working properly with leopard? Need help!, How come my dvd studio pro 3 is not working properly with leopard? Need help!

I recently installed os leopard on my power MAC G5 and my DVD studio pro 3 application is not working properly as it used to be. I was unable to create motion menu and build the dvd properly. Then I deleted and reinstall dvd studio pro 3, but it did not solve the problems. What should I do?

I have a sneaking suspicion it won't work in 10.5.x, possibly because of the version of Quicktime...
System Requirements:
Mac OS X v10.3.2
733 MHz or faster PowerPC processor (G4 minimum) and AGP graphics card
256 MB of RAM (512 MB recommended)
20 GB available disk space
8 MB of video memory (32 MB recommended)
QuickTime 6.5
DVD drive required for installation
I think your going to need a dual boot Mac with 10.4.x on another drive or partition.

Bapi_document_create2 does not work correctly with attached file.

Hi all.
I hava a problem with bapi. I programmed below.
        ls_docdata-documenttype = 'BBS'.
        ls_docdata-description = 'JJW test'.
        ls_file-documenttype = 'BBS'.
        ls_file-ORIGINALTYPE = 1.
        ls_file-storagecategory = 'ZSTW_KPRO'.
        ls_file-wsapplication = 'TXT'.
        ls_file-docfile = entity_filename.
        append ls_file to lt_files.
        CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
          EXPORTING
            documentdata       = ls_docdata
            PF_FTP_DEST = 'SAPFTP'
            PF_HTTP_DEST = 'SAPHTTP'
          IMPORTING
            documenttype               =      lv_documenttype
            documentnumber           =     lv_documentnumber
            documentpart                =     lv_documentpart
            documentversion           =     lv_documentversion
            return                           =     ls_return
          tables
            documentfiles     = lt_files.
        call function 'BAPI_TRANSACTION_COMMIT'.
If I don't attach the file, DIR is created but if attach some files, it does not work. What should I do??
regards.

Hi,
You can use the below to attach the file from BSP to SAP. But it doesnt use the BAPI - 'BAPI_DOCUMENT_CREATE2'. It works perfectly for me. Let me know if you have any questions.
Note: This code put the file into SAP Directory "/userapps/master_data/" as well as it upload the file into Transaction WTY since i am using Business object:BUS2222. You may need to modify the Business object if you ahve the one, otherwise you can just put it into SAP DIR.
FUNCTION ZATTACH_CREATE.
*"*"Update function module:
*"*"Local interface:
*" IMPORTING
*"     VALUE(FILE) TYPE SAPB-SAPFILES
*"     VALUE(STR_FILE_CONTENT) TYPE XSTRING
*"     VALUE(OBJECT_KEY) TYPE BAPIBDS01-OBJKEY
DATA: LOGICAL_SYSTEM TYPE BAPIBDS01-LOG_SYSTEM,
        CLASSNAME TYPE BAPIBDS01-CLASSNAME,
        CLASSTYPE TYPE BAPIBDS01-CLASSTYPE.
DATA: IT_FILES TYPE TABLE OF BAPIFILES,
        IT_SIGNATURE TYPE TABLE OF BAPISIGNAT,
   FILES TYPE BAPIFILES,
SIGNATURE TYPE   BAPISIGNAT.
DATA: I_TOADD TYPE TOADD,
        FILENAME_ALL TYPE SAPB-SAPFILES,
        FILE_PATH TYPE SAPB-SAPFILES,
        FILE_PATH_MEMORY(250) TYPE C, " path für SAP memory
        FILE_PATH_LENGTH TYPE I,       " length of the file_path
       FILE_CONTENT_LENGTH TYPE I,       " length of the file_CONTENT
       FILE_NAME TYPE SAPB-SAPFILES,
        FILE_EXTENSION TYPE TOADD-DOC_TYPE.     " file-extension.
DATA: I_FILE_CONTENT TYPE TABLE OF BAPICONTEN.
DATA: WA_FILE_CONTENT TYPE BAPICONTEN,
   STRING_CONTENT TYPE STRING,
   STRING_CONTENT1 TYPE STRING.
DATA:
   I_FILES TYPE TABLE OF BAPIFILES ,
        I_SIGNATURE TYPE TABLE OF BAPISIGNAT ,
        I_COMPONENTS TYPE TABLE OF BAPICOMPON ,
       COMPONENTS TYPE BAPICOMPON ,
        I_PROPERTIES TYPE TABLE OF SDOKPROPTY ,
        I_PROPERTIES2 TYPE TABLE OF BAPIPROPER ,
        I_PROPERTIES_DEL TYPE TABLE OF BAPIDPROPT ,
       MIMETYPE TYPE TOADD-MIMETYPE,
COMPID TYPE BAPICOMPON-COMP_ID, " compid for popup
        COMPID_FLAG(1) TYPE C,           " compid can't be changed
        MODIFY_FLAG(1) TYPE C,           " document is modified
        ATTRI_FLAG(1) TYPE C,            " attri can't be changed
        TITLE_FLAG(1) TYPE C,            " titel of the popup
        CANCEL_FLAG(1) TYPE C,           " cancel button Yes/No
        BUTTON_TEXT(10) TYPE C,
        INFO_TEXT(100) TYPE C,
VERSION_NR TYPE BDN_CON-DOC_VER_NO,     " version_nr for popup
        VERSION_LANGU2 TYPE T002T-SPTXT, " language field in POPUP
        VERSION_LANGU TYPE BDN_CON-LANGU," SPRAS language field
        TITLE_TEXT(100) TYPE C,          " title of the popup
        DESCRIPTION TYPE BDN_CON-DESCRIPT.      " descr. for popup
*FILENAME_ALL = fileUpload_event->file_name.
* Transfering into SAP File server.
FILE_CONTENT_LENGTH = XSTRLEN( STR_FILE_CONTENT ).
FILENAME_ALL = FILE .
STRING_CONTENT = STR_FILE_CONTENT.
DATA: OUT_LINES TYPE TABLE OF XSTRING.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
    EXPORTING
      BUFFER                = STR_FILE_CONTENT
*   APPEND_TO_TABLE       = ' '
* IMPORTING
*   OUTPUT_LENGTH         =
    TABLES
      BINARY_TAB            = I_FILE_CONTENT.
DELETE DATASET '/userapps/master_data/claim1.txt'.
OPEN DATASET '/userapps/master_data/claim1.txt' FOR APPENDING
    IN TEXT MODE ENCODING DEFAULT.
* LOOP AT I_FILE_CONTENT INTO WA_FILE_CONTENT.
*    TRANSFER STR_FILE_CONTENT TO '/userapps/master_data/claim1.txt'.
TRANSFER STRING_CONTENT TO '/userapps/master_data/claim1.txt'.
* ENDLOOP.
CLOSE DATASET '/userapps/master_data/claim1.txt'.
OPEN DATASET '/userapps/master_data/claim1.txt' FOR INPUT
       IN TEXT MODE ENCODING DEFAULT.
READ DATASET '/userapps/master_data/claim1.txt' into STRING_CONTENT1.
* -- split filename                                                 -- *
    DATA: LENGTH TYPE I.
DATA: PATH2(1200). " LIKE sapb-sapfiles.
DATA: L_FILE(1200),
        L_DIR(1200),
        L_DELIMITER        TYPE C,
        L_OFFSET           TYPE I,
        L_BYTES            TYPE I,
        L_DELIMITER_OFFSET TYPE I,
        L_DELIMITER_BYTES TYPE I,
        L_CHAR             TYPE C,
        L_PREVIOUS_CHAR    TYPE C,
        L_LAST_CHAR        TYPE C.
PATH2 = FILENAME_ALL.
LENGTH = STRLEN( PATH2 ).
L_OFFSET = 0.
WHILE L_OFFSET < LENGTH.
    L_LAST_CHAR = L_CHAR. "remember last character
    L_BYTES = CHARLEN( PATH2+L_OFFSET ).
    L_CHAR = PATH2+L_OFFSET(L_BYTES). "get current character
    IF L_CHAR = '/' OR L_CHAR = '' OR L_CHAR = ':'.
      IF L_DELIMITER IS INITIAL OR L_DELIMITER = ':'.
        "Typically we deal with absolute paths, so the first
        "delimiter is best. This allows for UNIX paths with
        "'' in the directory or file name
        L_DELIMITER = L_CHAR.
      ENDIF.
      IF L_CHAR = L_DELIMITER.
        L_DELIMITER_OFFSET = L_OFFSET.
        L_DELIMITER_BYTES = L_BYTES.
        "remember character in front of delimiter:
        L_PREVIOUS_CHAR = L_LAST_CHAR.
      ENDIF.
    ENDIF.
    L_OFFSET = L_OFFSET + L_BYTES.
ENDWHILE.
IF NOT L_DELIMITER IS INITIAL.
    L_OFFSET = L_DELIMITER_OFFSET + L_DELIMITER_BYTES.
    L_FILE = PATH2+L_OFFSET.
    IF L_PREVIOUS_CHAR = ':' OR L_DELIMITER = ':'.
      "path ends with or after drive identifer, include the delimiter
      L_DIR = PATH2(L_OFFSET).
    ELSEIF NOT L_DELIMITER_OFFSET IS INITIAL.
      "do not include a trailing delimiter for compatibility reasons
      L_DIR = PATH2(L_DELIMITER_OFFSET).
    ELSE.
      CLEAR L_DIR.
    ENDIF.
ELSE.
    L_DIR = SPACE.
    L_FILE = PATH2.
ENDIF.
FILE_PATH = L_DIR.
FILE_NAME = L_FILE.
* -- set new file_path to SAP memory                                -- *
FILE_PATH_LENGTH = STRLEN( FILE_PATH ).
IF FILE_PATH <> SPACE AND FILE_PATH_LENGTH < 250.
    FILE_PATH_MEMORY = FILE_PATH.
    SET PARAMETER ID 'OAP' FIELD FILE_PATH_MEMORY.
ELSE.
    FILE_PATH_MEMORY = SPACE.
    SET PARAMETER ID 'OAP' FIELD FILE_PATH_MEMORY.
ENDIF.
* -- data declaration ------------------------------------------------ *
DATA:
        SINGLE_C TYPE C.
CLEAR: SINGLE_C.
LENGTH = STRLEN( FILE_NAME ).
IF LENGTH > 0.
    WHILE LENGTH > 0.
      SINGLE_C = FILE_NAME+LENGTH(1).
      IF SINGLE_C CO '.'.
        LENGTH = LENGTH + 1.
        EXIT.
      ELSE.
        LENGTH = LENGTH - 1.
      ENDIF.
    ENDWHILE.
    IF LENGTH > 0.
      FILE_EXTENSION = FILE_NAME+LENGTH.
    ELSE.
      FILE_EXTENSION = SPACE.
    ENDIF.
ELSE.
    FILE_EXTENSION = SPACE.
ENDIF.
IF FILE_EXTENSION <> SPACE.
    SET LOCALE LANGUAGE SY-LANGU.
    TRANSLATE FILE_EXTENSION TO UPPER CASE.              "#EC TRANSLANG
    SET LOCALE LANGUAGE SPACE.
ENDIF.
* TR001++
DATA: I_TOADV TYPE TABLE OF TOADV.
DATA: WA_TOADV TYPE TOADV.
DATA: OBJECT TYPE SAEOBJART.
SELECT * FROM TOADV INTO CORRESPONDING FIELDS OF TABLE
          I_TOADV WHERE STANDARD = 'X'.
DELETE I_TOADV WHERE AR_OBJECT CS 'BDS' OR AR_OBJECT CS 'ZSEST'.
READ TABLE I_TOADV INTO WA_TOADV WITH KEY DOC_TYPE = FILE_EXTENSION.
* -- get name and description for the document                      -- *
CLEAR: COMPID,
         DESCRIPTION,
         VERSION_NR,
         MODIFY_FLAG,
         COMPID_FLAG,
         ATTRI_FLAG,
         TITLE_FLAG.
COMPID_FLAG    = ' '.              " -> compid can't be changed
MODIFY_FLAG    = 'S'.              " -> popup in save modus
ATTRI_FLAG     = 'X'.              " -> attri's can be changed
COMPID         = FILE_NAME.
VERSION_NR     = '00000001'.
VERSION_LANGU2 = SY-LANGU.
TITLE_FLAG     = '1'.              " -> BDN
* -- get the mimetype of the docuclass                              -- *
*PERFORM MIMETYPE_GET(OAALL) USING FILE_EXTENSION
*                            CHANGING I_TOADD.
DATA: I_DOCUMENTCLASS TYPE TOADD-DOC_TYPE.
MOVE FILE_EXTENSION TO I_DOCUMENTCLASS.
SET LOCALE LANGUAGE SY-LANGU.
TRANSLATE I_DOCUMENTCLASS TO UPPER CASE.               "#EC TRANSLANG
SET LOCALE LANGUAGE SPACE.
SELECT SINGLE * FROM TOADD INTO I_TOADD WHERE
                             DOC_TYPE EQ I_DOCUMENTCLASS.
IF SY-SUBRC NE 0.                    " nothing found -> default!
    I_TOADD-DOC_TYPE = I_DOCUMENTCLASS.
    I_TOADD-MIMETYPE = 'application/x-docType'.             "#EC NOTEXT
ENDIF.
MOVE I_TOADD-MIMETYPE TO MIMETYPE.
* -- fill file and signature structure                              -- *
CLEAR: I_FILES, I_SIGNATURE.
REFRESH : I_FILES, I_SIGNATURE.
DESCRIPTION = FILE_NAME.
FILES-DOC_COUNT = 1.
FILES-DIRECTORY = FILE_PATH.
FILES-FILENAME = FILE_NAME.
FILES-MIMETYPE = MIMETYPE.
APPEND FILES TO I_FILES.
* -- fill components and signature structure                        -- *
COMPONENTS-DOC_COUNT = 1.
COMPONENTS-COMP_COUNT = 1.
COMPONENTS-MIMETYPE   = MIMETYPE.
COMPONENTS-COMP_ID         = FILE_NAME.
APPEND COMPONENTS TO I_COMPONENTS.
SIGNATURE-DOC_COUNT = 1.
SIGNATURE-PROP_NAME = 'BDS_DOCUMENTCLASS'.
SIGNATURE-PROP_VALUE = FILE_EXTENSION.
APPEND SIGNATURE TO I_SIGNATURE.
SIGNATURE-PROP_NAME = 'BDS_CONTREP'.
*IF BDS_DOCTYPE_LIST-CONTREP = SPACE.
SIGNATURE-PROP_VALUE = ' '.                               "#EC NOTEXT
*ELSE.
* I_SIGNATURE-PROP_VALUE = BDS_DOCTYPE_LIST-CONTREP.
*ENDIF.
APPEND SIGNATURE TO I_SIGNATURE.
SIGNATURE-PROP_NAME = 'BDS_DOCUMENTTYPE'.
SIGNATURE-PROP_VALUE = WA_TOADV-AR_OBJECT. "'ZSRVCXLS'."TR001+
APPEND SIGNATURE TO I_SIGNATURE.
SIGNATURE-PROP_NAME = 'DESCRIPTION'.
SIGNATURE-PROP_VALUE = DESCRIPTION.
APPEND SIGNATURE TO I_SIGNATURE.
SIGNATURE-PROP_NAME = 'LANGUAGE'.
SIGNATURE-PROP_VALUE = VERSION_LANGU.
APPEND SIGNATURE TO I_SIGNATURE.
CALL FUNCTION 'BDS_BUSINESSDOCUMENT_CREA_TAB'
    EXPORTING
*   LOGICAL_SYSTEM        =
      CLASSNAME             = 'BUS2222' "classname_select
      CLASSTYPE             = 'BO'" classtype_select
    CLIENT                = SY-MANDT
      OBJECT_KEY            = OBJECT_KEY
    BINARY_FLAG           = 'X'
* IMPORTING
*   OBJECT_KEY            =
    TABLES
      SIGNATURE             = I_SIGNATURE
      COMPONENTS            = I_COMPONENTS
    CONTENT               = I_FILE_CONTENT
*   ASCII_CONTENT         =
* EXCEPTIONS
*   NOTHING_FOUND         = 1
*   PARAMETER_ERROR       = 2
*   NOT_ALLOWED           = 3
*   ERROR_KPRO            = 4
*   INTERNAL_ERROR        = 5
*   NOT_AUTHORIZED        = 6
*   OTHERS                = 7
COMMIT WORK AND WAIT.
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFUNCTION.
Message was edited by:
        Raja T

Windows Vista not working on Airport Extreme network

We had an old airport, and the windows vista computer could connect just fine, no problems. We recently got an Airport Extreme to add networked printing, and now the Windows Vista computer cannot connect. Anyone know why or how to fix this?
Thanks!
William
dell m1710 laptop Other OS Windows Vista Operating System

I am having the same problem. All my Mac's connect just fine as does my XP Machine. I dual installed Vista Home Prem and it won't connect as well. Going to MS to see what the issue is. I am connected through a switch to the Extream to the Boardband router.
Jim

Cintiq tablet will not work correctly with windows

I am using photoshop CS6 on a 64 bit windows system and my Cintiq 12 will not function with the pressure sensitivity. any suggestions to correct this?

Hi. You’ve posted your question in a forum that is for beginners trying to learn the basics of Photoshop. I'm moving your question to the Photoshop General Discussion forum for specialized attention to your situation.

Itunes 7.7 and windows Vista not working!

Hello,
I have been plagued with iTunes and Vista problems ever since i got it on my Pc over 9 months ago!!
I had hoped that a multimillion company like apple most successful in this nich of the market would want to keep its customers and provide us with up to date valid software but NO..... 9moths later same problem!
Every time i uninstall and install a newER verson of iTunes i get the following sequale of errors:
1. Firstly a box appears with a sliding bar with " Please wait while windows configures iTunes "
2. When this finsihed another box appears " iTunes stopped working "
3. When u click OK (the only option) in the task bar on the bottom right a small bubble appears with the statment " Data execution prevention has closed iTunes "
Now i have been battling with this problem for some time and have tried many things like changing version of iTunes (clean uninstall and new install etc)
I have also located that if i try to start up Quicktime i get the same error box this time reading " Quicktime has stopped wotking "
I have uninstalled Quicktime and installed a new clean copy to no avail.....
Appart from throwing my iPod in the Thames and getting a samsung mp3 player, i dont see any solution... anyone have any ideas?
My Thanks in advance!

Vwsurfbum
iTunes is a free program - it doesn't make good business sense for Apple to hire people to troubleshoot problems on Windows hardware - they'd have to hire hundreds, if not thousands to remote in to PCs and spend time fixing this kind of thing!
If you are getting that message about data execution prevention, you need to get DEP turned off, come **** or high water.
How about turning off UAC, can you even do that?
And with UAC turned off, can you disable DEP?
How to Disable UAC
Remember you can always turn these back on to keep your system "safe" - this is just a test to get iTunes working.
And give yourself FULL control over the itunes folders , while you're at it:
How to Take Ownership and Grant Permissions in Windows Vista

Color Management Not Working Correctly with 2 Displays

At work I am using two calibrated monitors connected to a Mac Pro. One of the monitors is a hardware calibrated wide-gamut NEC Spectraview, the other one is a software calibrated Apple Cinema Display.
It seems like Adobe products only ever display correct colors for the one monitor that happens to be the main monitor. When “Displays have separate Spaces” is off in the system preferences, it is the monitor that has the menu bar. When that setting is on, it is the monitor that was active while the application launched.
The main monitor always seems to display proper colors, while the secondary monitor shows exaggerated colors. It seems to me, like the applications only ever read the profile for the main monitor.
I have noticed this behavior with Bridge and After Effects. I am not entirely sure about Photoshop, since I only ever use it on the wide gamut monitor, but it seems like it does NOT have the issue. I do not use any other Adobe applications.
I had noticed this behavior back in Snow Leopard while using CS5 and CS6, but I never said anything, because I was using an outdated system. I was now moved to a new Mac with the most current version of Mavericks and the most current Creative Cloud versions of these apps and it seems like the issue remains.

https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform for bug reports

Multiple screens not working correctly in Leopard!!!!!!!!!!!!

I have used my Apple laptop with an external screen for years through multiple versions of MacOS.
Leopard is the first to really frustrate me!
When I disconnect my external screen (which is my primary screen when attached) all the windows migrate to my MacBook Pro, which is exactly what should happen.
HOWEVER.
When I reconnect my external screen, you would expect one of two things to happen, either the windows would go back to their last 'dual screen' positions (ideal but it has never done this before) or move everything that is on the MacBook Pro primary screen to the new external primary screen, which is what every version of MacOS has done before.
Not Leopard, oh no, it appears to randomly leave applications/windows on either screen, it even leaves the waste bin on the secondary screen some times!!!!!!!!
This is VERY frustrating as I now have to tidy up my desktop before I can start work every time I connect/reconnect my screen!
Is there a setting I am missing or is this a genuine bug?????????

Hello!
What OS version are you using?
And you are aware there is Shape option and a Path option for the drawing tools?

Windows Vista not working correctly with Leopard 10.5

Similar Messages

Maybe you are looking for