Windows Vista Oracle 10g Express Edition ODBC problem

Hi,
I am running my Oracle 10g Xpress Edition locally on Windows Vista Enterprise Edition. I am trying to create an ODBC connetion to the local XE using Window ODBC utility. I selected the Oracle in XE driver to create the connection, when I test it I get
Unable to connect
SQLState=S1000
[Oracle][ODBC][Ora]ORA-28547: connection to server failed, probable Oracle net admin error...
I am new to Oracle kindly excuse my ignorance :-)

I think you should probably download the file again, it might be corrupt.
~Jer

Similar Messages

Oracle 10g Express Edition installation problem in windowsXP

while installing the Oracle 10g Express Edition in windows XP ,
it is showing an error like this ,
the cabinet file 'Data1.cab' required for this installation is corrupt and cannot be used. This could indicate a network error.
If anybody knows solution to this problem plz mail me to this email id
[email protected]

I think you should probably download the file again, it might be corrupt.
~Jer

Oracle 10g Express Edition, Installation Problem

After run
# /etc/init.d/oracle-xe configure
Oracle Database 10g Express Edition Configuration-------------------------------------------------This will configure on-boot properties of Oracle Database 10g ExpressEdition. The following questions will determine whether the database shouldbe starting upon system boot, the ports it will use, and the passwords thatwill be used for database accounts. Press <Enter> to accept the defaults.Ctrl-C will abort.
Specify the HTTP port that will be used for HTML DB [8080]:8080
Specify a port that will be used for the database listener [1521]:1521
Specify a password to be used for database accounts. Note that the samepassword will be used for SYS, SYSTEM and FLOWS_020100. Oracle recommendsthe use of different passwords for each database account. This can be doneafter initial configuration:Confirm the password:
Do you want Oracle Database 10g Express Edition to be started on boot (y/n) [y]:y
Configuring Database...Starting Oracle Net Listener.Starting Oracle Net Listener.Starting Oracle Database 10g Express Edition Instance.
//error msg gos here
Failed to start Oracle
Net Listener using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr and Oracle Express Database using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/sqlplus.
in the orcale-xe service, some message shows:
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/lsnrctl: relocation error: /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/../lib/libclntsh.so.10.1: symbol semtimedop, version GLIBC_2.3.3 not defined in file libc.so.6 with link time reference
OS: Linux RH9
is that glibc version's problem? mine is glibc_2.3.2
how to make it?
thank u .

Hello,
I have the same problem on RH9.
[root@phpsrv init.d]# ./oracle-xe start
Starting Oracle Net Listener.
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/lsnrctl: relocation error: /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/../lib/libclntsh.so.10.1: symbol semtimedop, version GLIBC_2.3.3 not defined in file libc.so.6 with link time reference
Starting Oracle Database 10g Express Edition Instance.
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/sqlplus: relocation error: /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/../lib/libclntsh.so.10.1: symbol semtimedop, version GLIBC_2.3.3 not defined in file libc.so.6 with link time reference
Failed to start Oracle Net Listener using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr and Oracle Express Database using /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/sqlplus.
Regards,
Pavel Kucera

Install problems using VISTA, Oracle 10g Express edition and VS2005

Hi,
Has anybody got this to work yet?
I'm on Vista Release Candidate 1, VS2005 and 10g Express.
When I try to install the tools (ODTwithODAC10202) the install crashes VS2005.
I can see the tools on the Visual studio menus, but any attempt to use them gives me a "Oracle Developer Tools for Visual Studio failed to load" error message.
Any ideas?

Have you got the VS 2005 addin to work on Vista? I installed on XP then upgraded to Vista (RTM) and the add-in no longer works. Am wondering whether to uninstall/reinstall or wait for Oracle to certify use with Vista.

Regarding oracle 10g express edition login problem

Hi all,
This morning, i downloaded 10g oracle express editon from oracle.com.. I installed sucessfully. i am able to login from the command line sucessfully..
But when i am clicking on Goto database home page it is connecting http://127.0.0.1:8080/apex and it says page can not be displayed .. can anyone help me please its urgent
Ganesh

Hi Ganesh
Try to chang your port - it worked on my installation see the following link:
http://www.oracle.com/technology/tech/linux/install/files/el5_11g_sqldev_apex.txt
Additionnally do Perform the following in sqlplus logged on as sys:
show parameter dispatchers
This should return something like:
NAME TYPE VALUE
dispatchers string (PROTOCOL=TCP) (SERVICE=<sid>XDB)
max_dispatchers integer
When in your case the value of dispatchers is empty, you have to do the
following:
Define an entry in the init.ora (<sid> must be replaced by the sid of your 11.1.0.6db):
dispatchers="(PROTOCOL=TCP)(SERVICE=<sid>XDB)"
for example:
dispatchers="(PROTOCOL=TCP)(SERVICE=v111XDB)"
After the change you have to restart the database.

Oracle 10g Express Edition Beta 3 ODBC Driver Always Crashes

I find that if you set up an ODBC Data Source for Oracle 10g Express Edition on Windows XP SP2 using the "Oracle in XE" driver, anything that tries to access it will crash, even the Windows ODBC Data Source Administratior if you click the "Test Connection" button.
Having clicked the button, you get a window coming up entitled "Oracle ODBC Driver" with a yellow exclamation mark in it, with no other text in the window except for an OK button.
If you press OK, then it crashes and goes through the "Please tell Microsoft about this problem" process....

Hi,
Thanks for your comment, but I can't get onto the XE forum.
I found http://www.oracle.com/technology/products/database/xe/forum.html which says:
Forum registration is possible only by downloading and installing Oracle Database XE. After installation, click on the "Registration" link from the Database homepage.
However I find that the "Database Homepage" does not exist.
Choosing the Oracle XE "Go To Database Home Page" takes my browser to http://127.0.0.1:8080/apex which is not available even though my oracle server is running and sqlplus can talk to it.
There's definitely nothing serving on tcp port 8080, as follows:
[dcampbel@clevo]~> telnet localhost 8080
Trying 127.0.0.1...
telnet: Unable to connect to remote host: Connection refused
Regards,
-- Dave

Oracle 10g express edition browser login problem

Hi
I installed oracle 10g express edition and after installing successfully logged in browser , unlocked hr login and also created one form then I shutdown the database and rebooted my pc and since then when I try to login to "go to Database Home page" after starting database , I get a cookie 127.0.0.1 with username and password, First of all I am not sure what username/password it is expecting, I believe it requires my Windows XP username and password , I tried to enter couple of times my pc login username which has administrator privileges, I also checked it has ora_dba group but after entering pc username , password browser opens saying "unauthorized". I created another os user and tried with that still same. I tried entering oracle password "SYSTEM" and password for it but still could not login, I tried HR username password still nothing.
I tried disabling firewall but still same issue. I tried to re-install two time but still same .
Start database dos prompt does show all the process are started successfully .
I also did ping for 127.0.0.1 and it does ping.
I tried everything what I knew.
Can anyone please help me ..to resolve this issue .

Hi
This is how I resolved the browser login problem .
I checked the listener log
C:\OracleXE\app\oracle\product\10.2.0\server\NETWORK\log
And found the error
TNS-12542: TNS:address already in use
TNS-12560: TNS:protocol adapter error
TNS-00512: Address already in use
I have another version for oracle installed on my pc .
I ended both the oracle process (Oracle.exe) through the Task Manager
Then manually started OracleServiceXe service through Component Services
Control Panel Performance & Maintenance Administrative Component Services
Then did following
Programs Oracle Database10g ExpressEdition Start Database
Programs Oracle Databse10g ExpressEdition Go to Database Homepage
Enter username SYSTEM
Enter password xxxxxx whatever given at the time of installing.
And I did successfully login to the browser .
Hope this will help to those of you who have run into similar problem which I faced
Good Luck .
A. Patil

I have a problem with oracle 10g express edition

Hello,
I have just installed oracle 10g express edition and I have a problem with the script editor. I can write anything in the window that appears below buttons undo,redo and find, It is like disabled. I use windows XP, Firefox 2.0 ( I have also tried with Iexplorer and It does not work either). I have javascript enabled.
anyone knows what is the problem?
Later,I have installed it in a virtual machine of Windows 2003 Server and It works well but I`d rather use it in my Microsoft XP
Thank you very much
Fernando Martínez

It looks like you can fix this if you replace the codearea.xbl.xml and codearea.iframe.html files in the
/i/editor folder with files from an Apex 2.2.1 installation - such as the one on apex.oracle.com.
Since I don't know what the licensing implications are, I will let you figure out the details.

Installing and Running Oracle 10g Express Edition on Microsoft Vista

My computer is running on Microsoft Vista.
I downloaded Oracle 10g Express Edition for Vista.
I ran the setup.exe. Everything went well there.
But, when I open the SQLPlus program, a window prompts me to enter my username, password and host string.
Can someone please tell me what it is expecting for these fields? I am using the same username and password I used to create my Oracle account.
But what is the host string?
Appreciate it.
Thanks.

This may help
http://sites.google.com/site/delphibasics/home/delphibasicsarticles/installingoracledatabase10gexpresseditiononwindowsvista
Check out the section "Access demonstration data"
Also this is not the best place to post a question of this nature. This might be better :
Database Installation
Best Regards
mseberg

Can't uninstall or reinstall oracle 10g express edition in windows server 2

Hi,
I need help from all of you, i already install oracle 10g express edition in windows server 2003 in D drive. but i can't remove because the oracle not in the add remove program so i download the windows install clean up to remove
but after remove it still in the all program i still can start and stop the database but can't go to the database home page. can any one guide me to use command prompt to remove.
Thanks

Hi,
I need help from all of you, i already install oracle 10g express edition in windows server 2003 in D drive. but i can't remove because the oracle not in the add remove program so i download the windows install clean up to remove
but after remove it still in the all program i still can start and stop the database but can't go to the database home page. can any one guide me to use command prompt to remove.
Thanks

Problems to initiate oracle 10g express edition

Good afternoon I am speaking of Brazil with a text translator.
But I have installed Hundreds and I am trying to install oracle 10g express edition release 2.
I am with a problem in the Oracle 10g Express Edition in the installation part when I vo to initiate the service, it does not initiate.
And when I give I command /etc/init.d/oracle-xe status appears the following message: Your default context is user_u: system_r: unconfined_t. Of it you want you choose different one? [n]
I do not know more what to make to decide this.
I thank the attention.
Gabriel.
Message was edited by:
user523701

Oracle XE has it's own forum - to register and discuss XE problems with XE experts use URL http://www.oracle.com/technology/xe/registration
Once you have registered, you sign in to the forums and the link to the XE forum is there. But you do have to sign in as the user who registered XE.
You will also need to provide a few more pieces of information:
1) actual distro and version of Linux
2) userid used to install XE (should be root)
3) userid used to run "/etc/init.d/oracle-xe start" (should be root)

Download Oracle 10g express edition for window

I want to download Oracle 10g Express Edition, but it seems that this version is replaced by 11g Express version.
Is there any place which I can download 10g Express Edition?
Thank.

I think Oracle Corp. has removed 10g XE download because Oracle Corp. is pushing more for 11g now (10g XE was never officially supported but 10.1 and 10.2 Standard/Entreprise Edition are already in extended support mode: 10.2 will be in sustained support mode in July 2013).

Can't uninstall or reinstall oracle 10g express edition in w/server 2003

Hi,
I need help from all of you, i already install oracle 10g express edition in
windows server 2003 in D drive. but i can't remove because the oracle not in
the add remove program so i download the windows install clean up to remove
but after remove it still in the all program i still can start and stop the
database but can't go to the database home page.The error message (the install
cannot proceed as service OracleServiceXE is present on the system. Remove the
service , reboot the systemand retry the installation) can any one guide me to use
command prompt to remove.
My email address [email protected]
Thanks

Hi,
Perform the following steps, this will solve your problem and can go with new installation. :-)
(Only perform the steps 7.2 section and here is the link : http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#BABDJDCD
Manually Removing Oracle Database XE
If the deinstallation is interrupted, follow these steps to manually remove Oracle Database XE from your computer:
Step 1: Stop the Oracle Database XE Services
Step 2: Remove the Oracle Database XE Registry Editor Settings
Step 3: Update the System Variable Path
Step 4: Remove Oracle Database XE from the Start Menu and Desktop
Step 5: Remove the Oracle Database XE Directories
Step 6: Install and Run the Windows Installer CleanUp Utility
7.2.1 Step 1: Stop the Oracle Database XE Services
Follow these steps:
1. Open the Windows Services utility: From the Start menu, select All Programs, then Administrative Tools, and then Services.
2. If any of the following Oracle services exist and have the status Started, then select each of the services, and click Stop:
OracleXE
OracleXETNSListener
OracleJobSchedulerXE
OracleXEClrAgent
OracleMTSRecoveryService
3.
Exit Services.
See also the Microsoft online help for more information on stopping services.
7.2.2 Step 2: Remove the Oracle Database XE Registry Editor Settings
Follow these steps:
1.
Log on to Windows with Windows administrative privileges.
2.
Ensure that you followed the instructions under "Step 1: Stop the Oracle Database XE Services" to stop the Oracle Database XE services.
3.
Start the Registry Editor at a command prompt:
SYSTEM_DRIVE:\> regedit
4.
Go to HKEY_CLASSES_ROOT.
5.
Delete the following keys:
NEED TO CONFIRM THE XE-SPECIFIC ONES.
6.
Go to HKEY_CURRENT_USER\Software.
7.
Under Microsoft\Windows\CurrentVersion\Explorer\MenuOrder\Start Menu\Programs, delete the Oracle Database 10g Express Edition key.
8.
Go to HKEY_LOCAL_MACHINE\SOFTWARE and search for the ORACLE group key.
9.
Expand the ORACLE group key and then delete the KEY_XE and OracleMTSRecoveryService keys.
10.
Go to HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI.
11.
Expand the ODBCINST.INI key and remove the Oracle in XE key.
12.
Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
13.
Delete the following keys:
OracleServiceXE
OracleXEClrAgent
OracleXETNSListener
14.
Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application.
15.
Delete the Oracle.xe key.
16.
Exit the Registry Editor.
17.
Restart your computer.
Thanks,
Rams...
Edited by: user10888288 on May 3, 2010 5:58 AM

Trying to uninstall oracle 10g express edition

Hello,
The title says it all.
I installed the application earlier and I'm now trying to unistall it.
I tried to use the "classic" unistall function from the control panel but it didn't work. When I clicked "unistall" the oracle icon disappeared and but the program is still there.
Is there any other way to unistall it?
The version is "oracle 10g express edition" installed on Windows vista.
Thanks in advance for you're help!
Gladys.
Edited by: Badaboum on 18 janv. 2009 03:26
Edited by: Badaboum on 18 janv. 2009 03:49

I used this process and it worked:
1. Stop all oracle services
2. Delete all oracle registry entries
3. Delete C:\program files\oracle directory
4. Delete oracle_home directory
5. Delete oracle items from the start menu.
Interesting link for other that may be in the same situation in the future:
http://www.oracle-base.com/articles/misc/ManualOracleUninstall.php
extract from the link:
QUOTE
In the past I've had many problems uninstalling all Oracle products from Windows systems. Here's my last resort method:
* Uninstall all Oracle components using the Oracle Universal Installer (OUI).
* Run regedit.exe and delete the HKEY_LOCAL_MACHINE/SOFTWARE/ORACLE key. This contains registry entires for all Oracle products.
* Delete any references to Oracle services left behind in the following part of the registry:
HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/Ora*
It should be pretty obvious which ones relate to Oracle.
* Reboot your machine.
* Delete the "C:\Oracle" directory, or whatever directory is your ORACLE_BASE.
* Delete the "C:\Program Files\Oracle" directory.
* Empty the contents of your "c:\temp" directory.
* Empty your recycle bin.
At this point your machine will be as clean of Oracle components as it can be without a complete OS reinstall.
Remember, manually editing your registry can be very destructive and force an OS reinstall so only do it as a last resort.
END OF QUOTE

Oracle 10g express edition installation file corrupt?

Hi
I have now tried at least 5 times. I downloaded the beta Windows version of Oracle 10g express edition. The download is successful each time but every time I try to run the installer, it says "Error in installation file". Anybody else facing this problem?

Hi,
Have you checked for any errors in log file....????
Can you connect via SQL*PLUS ... , for example...????
Regards,
Simon

Windows Vista Oracle 10g Express Edition ODBC problem

Similar Messages

Maybe you are looking for