Windows Vista RC 1 & DKU 2 usb cable driver error.
Hello, i have problem whilst installing PC Suite on Vista RC1, i get an error 1721 when atempting to install the cable driver (build 681 rel-13) with build 68 rel-22 it installs but doesn't find the phone (6680) when connected. Vista builds 5472 & prior ones didn't have this problem, only 5536 & RC 1.
04-Sep-2006
07:35 PM
seraphim wrote:
i have used vista with pc suite - no problems. but that was 6.8.22, not the latest version. i will try and find the build number
i remember sister_bliss has also had this working, try a search to see if there is a thread. may help
Howdy there partner, good to have you back
Similar Messages
-
Hi all,
Just purchased a DKU-2 usb cable for my Nokia 6230, i installed the pc suite software which came with it and then tried connecting my phone to the pc as the wizard stated, it then froze while attempting to connect the phone to the pc. I then had to restart the program and i then clicked on connect me at the bottom right and it then came up with an error message "there is no available connection type, and therefore connection to the phone cannot be established, the wizard will exit. The phone itself is still recognized as new hardware by the computer.
Can anyone solve my problem?
ThanksHi at all,
I have the same problem of GOWZY after installation. When I press OK on the message "failure to detect available connection type, please reinstall pc suite", another error message appear "Connection to Nokia PC suite not result. Reinstall Nokia PC suite. (code: Init IMediaControl2)". Can we help me about this problem?.
For information my system configuration is as follow:
Phone Nokia 6680
Operating system:
Microsoft Windows XP
Creation 2600
Service Pack 2
Language: Italian (Standard)
Language for programs not Unicode: Italian (Standard)
International formulations: Italian (Standard)
Input language: Italian (Standard)
Nokia PC Suite:
Build 6.81.13.0
Language: Italian
Connectivity Cable Drivers:
Build 6.81.1.2
Microsoft Outlook:
Build 11.0
Creation 8000
tanks and regards. -
Hi all,
I have a DKU-2 USB cable I used with my lost S60 Nokia 6620 (6600 european equivalent). Is it compatible with my new S40 Nokia 6133 (6131 equivalent I think)? I am not willing to pay for the new recommended cable if it is just OK to use the old DKU-2 (even if it is slower).
Thanks,
JPRola
CanadaThanks to both of you, Petrib and the_mik.
I was just afraid of even trying it. Actually I do have to use it because the driver for the new cable won't even install. It complains telling that I already have another driver installed. Not true, I un-install the 2 year old PC Suite and DKU-2 driver and run a registry clean-up before attempting to install the latest PC Suite. My XP Windows installer is the version 3 something.
And that's true, the 6133 package in Canada comes only with the phone and the charger.
Thanks,
jprola -
What version of pc suite supports a dku-5 usb cabl...
Hi,
My problem relates to establishing a connection between my Nokia 6100 and a desktop running Windows XP Home SP 2 - 2 Go RAM and fitted with all the bells and whistles....
Advised by an "expert", I bought a dku-5 usb cable to discover that my current pc suite version (5.1) does not support this kind of cable but on the contrary requires a serial cable (dku-2 type). I believe this is also the case for versions 5.8 and 8.5
I found out that the installation program linked my dku-5 cable with com port #4 on my computer.
Am I bound to buy a dku-2 cable or is there any way to establish a virtual connection between an usb port and a Com port ?
Any help will be highly appreciated.
Regards to all.25-Mar-2008 06:42 AM
manta wrote:
by firmware I mean imbedded software, not hardware.
The important thing to understand is that most new Nokia phones that have a possibility to connect a cable are real USB devices, but some are not, although physically you connect the phone in PC side to USB port.
See this list:
http://europe.nokia.com/A4678148
to check what cable is suitable for what phone.
The only NOkia cable that needs a separately installed cable driver is the old DKU-5. All other NOKIA cables require you to install Nokia PC Suite and the cable drivers are included in the PC Suite package.
There are countless non Nokia cables available at the market, some of them seem to work OK with Nokia cable drivers, but some require their own driver and some seem not to work at all.
Hello, Manta,
Here I am again still trying to connect my Nokia 6100 with my desktop. After a Google search about "Nokia 6100 driver update", I ended up onto a site offering a download of an updated version of Nokia PC Suite 5.8 clearly mentionning the 6100 model as being eligible for connection. I subsequently downloaded this program which is actually a .exe file.
My problem now is : what is the proper installation sequence ? I have 2 cables available: DKU-2 and DKU-5. Should I install the .exe first ? At what point should I connect my phone and which cable should I use ? I'm afraid I cannot use the "hardware installation" option since I don't know what directory the new drivers will be written to.
I hope you will not tell me my situation is desperate ....
Thank you for your atttention/help.
Regards -
How can I download my pictures from my Ipad (ios 8.1.3) to to my computer (windows 7) either directly thru a USB cable or indirectly with a SD card? I have lost important pictures on the computer. Most of them are intact on my I Pad. I am aware that I-Cloud is an option, but would rather do it another way.
use the Windows Photo import with the lightning-to-USB cable.
-
How to communicate with a PC through a DKU-2 USB cable?
Could you please give me some hints on how to send data to a PC through the DKU-2 USB cable on my Nokia 6630 phone? I suppose I will need a J2ME MIDlet application on the phone and a J2SE application on the PC to receive the output but I am a beginner with J2ME and can't figure out where to start from. Can the javax.microedition.io.Connector class be used to achieve this? Any suggestions would be greatly appreciated. Thanks in advance for your time.
Hello Ellen,
Welcome to Apple Discussions.
b BOTH you AND your PC buddies
will need to meet ALL the requirements of Ralph John's FAQ titled How do I Get Video and Audio Chats with PCs ?. This is crucial to your success. Double check everything.
For more info, also see Ralph's
b GREAT
iChat Personal Web Pages. (You may want to bookmark Ralph's site as a primary iChat AV reference.) Particularly, the "... girlfriend ..." section gives specific info on setting up to video with a PC from the very beginning. -
I am running Windows Vista 64 bit and i get a runtime error R6034 when i was updating itunes. How can i update itunes with out getting this error?
* Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History"
App tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
* http://kb.mozillazine.org/Session_Restore -
I installed iTunes update on my pc running windows vista and now it will not open. Error message MSVCR80.dll missing???
First try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
http://www.apple.com/itunes/download/
If you still get the errors after that, try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
HT1178 Can the time capsule be used with a pc running Windows Vista , 7 or 8 as a backup drive
Can the time capsule be used with a pc running Windows Vista , 7 or 8 as a backup drive. If so what software do I need to buy?
Can the time capsule be used with a pc running Windows Vista , 7 or 8 as a backup drive.
Yes, on XP, Vista and 7. Have not tried 8.
If so what software do I need to buy?
Genie Timeline Pro does a very nice job...and it is similar to Apple's Time Machine. It's not cheap though. Check with the Genie folks for more info and compatibility with Windows 8.
Genie Timeline Pro | Overview | Time Machine Backup Software for ...
Other users may have some other suggestions. -
The past few days I find my IOS devices don't show up in "My Computer" and they don't show up in iTunes. All other USB devices work well. I am using Windows Vista. I have tried several troubleshooting things, including unintalling and reinstalling iTunes, stopping and starting the Apple monitors, etc. Nothing is working. Ideas?
It's really great that you're taking the time to help me. I did several of the tests you recommend over the last two or three days. It always shows that the iPod/iPhone/iPad isn't present. Here's more. I got a Norton tech to help me yesterday and it isn't the anti-virus, as we uninstalled everything and it still didn't work. I went deeper into the system through the control panel, and found the device detected on the appropriate USB port, but it won't show up in "My Computer". Two of the three devices show up on another PC, (I didn't test the third) so I'm leaning to something in iTunes because every other USB device I plug into the Vista ports shows up quickly and works perfectly (thumb drives, wireless mouse, camera, etc). I already unistalled all Apple software and downloaded new, but the problem still exists. I have restarted, unplugged, you name it and the devices aren't showing up. I can't wirelessly sync either because one has to set that up through iTunes prior to doing it.
-
Windows Vista - Sound Blaster 24 Bit Usb - No Microphone Playback Real Time Kara
Hi,
I don't no if this problem was just discussed in another thread, if so please giveme simply the link...
I'm Italian, so sorry for my poor english or bad translation...
PC: Laptop, "Toshiba Satellite A 200 24E"
OS: "Windows Vista Home Premium Service Pack " - All update done.
Dev.: "External Sound Blaster 24 Bit Usb" - Driver downloaded from Creative Web Site
At the very beginning I tried the internal Sound Card (Realtek) to do karaoke in spare time, but couldn't hear anything coming from Microphone. So I tried to buy an external sound card. The result is the same.
On "Record Device" I can see the Microphone Device, the level is on top, when I speak in the microphone I can see the green bar light up, if I record my voice I can hear myself when I playback, but no sound in real time.
I read that a lot of people have similar problems, but everone solves in a different manner...
I tried:
- I read in other forums advices about to do something like unmute microphone on "Audio playback devices" >> "Speaker" >> "Levels", but I don't see any checkbox, I can see only Speaker Level Bar...
- As read in other websites, to add a registry key (something like EnableInputMonitor in a specific path), but nothing changes. I cannot find other Device, not in Playback Devices, and not in Record Devices.
Please help, all was great with the same microphone, on old Packard Bell Laptop, old Sound Blaster mp3+ usb, and old Windows Xp.
If no solution, I 'm going on buy an old laptop with Windows xp, or an external Mixer, but I'm disappointed on spending more money...well ?
-
Windows Vista 32 bit and also 64 bit driver available for my HP-deskjet 5650 color inkjet ?
I have an HP-deskjet 5650 printer connected to my desktop pc that is running Windows XP and it prints fine. I have 2-other laptops on same network with Vista-32 bit on one and the newest laptop has Vista-64 bit. When I set up the network print connection by putting in the computer name and then the printer name it says a driver is missing on the server pc,which is actually the XP-desktop. Back on the desktop I made sure the printer was shared for the network. Then it also stated that if I was trying to print from a pc with a different O/S then you must add newer drivers which would have to be Vista.After checking,I dont think any are available for the deskjet-5650. Does anyone have an answer?
HI,
The work around that appears to work is to choose the Deskjet 990 driver from the list of printers supplied in the Windows Vista operating system.
Install the driver
Install the compatible print driver on the computer.
Make sure that the USB cable is not connected to the HP product.
From the Windows taskbar, click the Windows icon (), type control printers in the Start Search box, and then press Enter . The Printers window appears.
Click Add a printer and then click Add a local printer .
Click the Use an existing port check box.
In the Use an existing port drop-down list, select LPT1: (Printer Port) and then click Next .
Under Manufacturer on the Install the printer driver dialog box, select HP .
Under Printers , select the Deskjet 990 and then click Next .
In the Printer name text box, type the HP product name and then click Next . The print driver starts to install.
NOTE:The name of the alternate print driver appears as the default name. The name can be changed to the name of the HP product, if desired.
9. After a message appears on the computer that the product was added successfully, connect the USB cable to the product and to the computer.
10. On the Found New Hardware screen, click Cancel .
NOTE:If multiple pop-up windows appear, click Cancel on each window.
Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
I am employed by HP -
Backup a dual boot iMac with OSX + Vista to Time capsule and USB hard drive
I have just bought a Time Capsule which is now working as my WiFi Network base station and backs up an iMac and a Macbook. The iMac has both OSX and Vista (using Boot Camp) and I was using a USB Hard Drive that has 2 partitions (HFS+ for the Mac; NTFS for Vista) to back up the iMac. Rather than leave this attached to the iMac just to back up the Vista partition I would like to move it to the Time Capsule's USB port and use it as NAS. The idea being that it becomes a NAS with one partition used to back up the Windows data when I run the iMac with Vista and the other partition to archive the Time Machine backups from both the iMac and Macbook. I tried to connect it as it was but got an error and reading the forum it seems that it won't work unless both partitions are HFS+ or FAT. If I reformat the NTFS partition to HFS+ will I be able to use the built in backup function of Vista to back up the Vista partition to the USB hard drive? I read somewhere else that Time Capsule takes care of the formatting for an external NAS drive and Windows will be able to read and write to it even though it's not NTFS. Any ideas comments appreciated.
This is crude but if you need a work around, just plug the USB drive directly into the iMac.. copy the files to it.. then plug it into the TC.
You also do not need to use the TC as an intermediary between your iMac and MBP.. just turn on sharing in the computer.. so you can directly copy files from one to the other.. Macs have public access directory preconfigured for each user account.
As far as mounting the TC..
In finder use Go, Connect to server.. and type.
AFP://TCname or TCipaddress
Where TCname is the actual name of the TC.. I strongly recommend you follow SMB network rules.. ie if your TC has a name like
Fred Blog's Time Capsule 2445566.
It is too long.. it has spaces and it has non-alphanumeric characters.
Shorten it to FredTC
No spaces no characters that are NOT alphanumeric.
TCIPaddress is simply the standard IP.
You can also use CIFS://TCname which according to the article forces the connection back to SMB1 rather than SMB2 which as usual is broken.
But I would definitely use AFP if possible. I cannot understand the decision to move to SMB as standard. -
Windows Vista Set-Up Won't Recognize Promise Driver - **UPDATE April 15**
In my ongoing efforts to format and set-up a Maxtor 15K Atlas II as a boot drive,
I am still unsuccessful. The latest roadblock is that in attempting to install Vista
Business 64-Bit, Windows Set-up does not recognize any of the Promise drivers
as compatible with my hardware.
MSI K9A2 Platinum - version 1 (currently using v1.4 BIOS)
AMD 5000+ Black Edition CPU
MSI Radeon 3870 GPU
WD6400AAKS (Boot Drive)
G.Skill DDR2 800 (1GB stick)
Corsair VX550W PSU
Logitech cordless Keyboard & Mouse
22" Viewsonic Monitor
Windows Vista Business 64-Bit
Any suggestions?
Tia.
JBQuote from: richunix on 14-April-08, 20:56:43
Make sure you are BIOS version 1.3. BIOS version 1.4 will not support the Promise RAID. You would believe how many days I went through :wall:until I contacted MSI only to be told you have remove BIOS version 1.4 and re-flash to version 1.3. Sometime I hate tech supoort .
Richard
Yep, went through the same thing here, and re-flashed back to 1.3 a couple weeks ago.
Got my Maxtor 15K Atlas II SAS drive back from Seagate, and the drive they sent me
seems to be healthy -- at least now it can be SEEN in the Promise FastBuild Utility.
Problem now i, Windows Set-up still refuses to SEE the drive, even after installing
the correct Promise drivers -- which means STILL no way to get this drive
working with this board.
I even tried booting off a SATA drive and seeing if Windows could format it that way,
but it still doesn't see the drive in the Drive Management control panel.
My drive is good. My SAS cable is good. I just can't get this SAS drive formatted.
This is going beyond suckish.
discouraged.
JB -
Windows 7 64bit has an MTP USB Device Failed error message when I attach my Ipad1
I keep getting an MTP USB Device Failed error message when I plug in my USB cable into my Ipad1. Can someone help?
This is NOT resolved. The "Upper..."Key in the registry editor doesn't exist as you can see below in the image I am providing. This is still an OUTSTANDING issue, can someone please help with resolving this issue, super frustrating.
This is not just an iPAD issue, I get the same problem with my iPhone as well, both (iPhone and iPad) have the latest iOS 6.1.3 installed as well.
Maybe you are looking for
-
I have a MacAir, mid 2011 model, and want to view video on my TV. I see that I need a mini display port to Hdmi but there are many of these. What exatly do I need and how does one go about viewing a movie downloaded to the MacAir on a TV screen?
-
Error Handling - displaying Error on ALL error events
I am trying to set up a global error handling page error.cfm so that whenever any error at all occurs I can display my error.cfm page. At first I tried the following in the application.cfm page, and then ran a page that tried to output a variable tha
-
Hello, I have a problem with Adobe premier element 9. I created a project with some photo and in this photo I put a little video to comment it. The project is in 1280*760. My problem is when I want to record my project in a littler resolution (800*60
-
With the automatic addition of an update on both home & work computers, attachments went from being identified & opened as appropriate files, even when identified as .doc or .pdf, etc., all become .ashx (see details below)
-
How do I view pdfs stored on iCloud through Preview on the iPad?
I upgraded to Mountain Lion recently and I see in Preview I am able to store PDFs on iCloud. Does this mean synchronozation to the iPad aswell? I'm wanting to consoladate and only use iCloud instead of Dropbox.