Windows vista recovery error CTOERROR.flg and following that error 0x643 while installing update

Hi All
system info : HP LAPTOP DV6 -1256tx , windows vista sp1 32 bit
When I am trying to install windows vista sp1 from recovery disks/partition I am getting the error from recovery manager prompting me to choose either to retry or see the details for failure : CTOERROR.flg in form of notepad on my desktop. I have done retry 100 times but to no avail. I cannot restart after this recovery failure message as it shows dialog box on restart: windows security update is not installed successfully or is not trusted.So, i have to go through recovery process again to see the desktop (everything functioning - internet,video, music all) but only once.
Last time i got this message too . When i did installing windows from recovery disks few months back, that time  i figured out to install all imp. updates  through  automatic  windows update.All the updates were installed successfully and then it restarted and gone through process of language settings,time settings and all....
But this time when i am trying to update windows, i am getting windows update error 0x643 which is for security update for .net framewrok 3.5 sp1 and family update.I do know the answer how to get away with this error from "windows help" and also from this forum too, which asks for installing .net framework updates from windows update site directly. But the problem is:
 Windows update ask me to restart after automatic or manual windows update installation takes place and restart causes problem as it shows dialog box - windows security update is not installed successfully . I need to install all updates in one go like last time from my understanding.:
1. So if i install windows update (to try my luck as last time) it shows 0x643 error for .net framework and asks to restart and after that when i try to manually install failed updated 0x643 it asks me to restart the windows for pending updates.
2. Alternatively, If i try to install failed update first just after recovery failure it won't allow me to install important updates for vista sp1 and asks to restart windows.
All i need is to successfully update all updates through windows automatic update which is not happening at the moment.
Not even able to upgrade to sp2 bcz it too restarts for installing.
Please Help.
Thanks in advance.

Hi Mario-L,
I manually downlaod the update  KB3035034 and tried to install in my preview build 9926, it shows The update is not applicable to your computer". Actually, what shows in my system when I check for updates, it detects update Kb 3037975
and 3037975 redirects you to 3021953 see description in this link
http://support.microsoft.com/kb/3021953
After installing the updates, and view update history, it shows:
Personally, I have no idea on this issue currently, please submit a report via Windows Feedback App
Yolanda Zhu
TechNet Community Support

Similar Messages

  • I've unistalled and reinstalled the latest version of iTunes...but I continue to get 'Runtime error R6034'...followed by 'Error 7 Windows Error 1114"

    I've unistalled and reinstalled the latest version of iTunes...but I continue to get 'Runtime error R6034'...followed by 'Error 7 Windows Error 1114"....any help from anyone?

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Windows vista ultimate itunes 7.1.1 VB script error

    I am trying to load i-tunes current version on my windows vista ultimate pc and I keep getting a message which says i-tunes cant install, windows visual basic is turned off, turn on and reinstall?
    Any one have any ideas.
    Thanks

    Same issue here, have windows vista try to run itunes and get VBScript off error message?? Help...

  • I'm trying to install iCloud on my PC running Windows Vista with Service Pack 2 and I get a message that the set up program is not a valid win32 file.

    I'm trying to install iCloud on my PC running Windows Vista with Service Pack 2 and I get a message that the set up program is not a valid win32 file. Can anyone help me with this?

    What is the exact error message?

  • Tx1312AU Windows Vista Recovery partition lost

    tx1312AU Windows Vista Recovery partition lost after HD crash, how to get it back or should I try Win XP? (I hate Vista already...)

    sijyb00 wrote:
    See, the the thing is, I DID make the recovery cd... but it isn't working. From my understanding, the cd uses the information from the recovery partition to restore Windows? Correct me if I'm wrong.  Every time I boot up the cd it detects no OS and when I click continue, it begins the installation and immediately says Installation cancelled, missing files, something like C:\win.int is missing.
    So the recovery cd is not working. I called Toshiba and from what I could understand from the horrible english, was that they would charge me for another recovery cd... which I don't need, because I have one. Or send in my laptop for "repair." They said it was my hard drive. Which is complete bull**bleep**, when windows failed I ran a linux os on it perfectly fine, so it is not my hard drive.
    Anyone have any ideas on how I can fix this? I have a product key for vista which I PAID for when I bought the laptop... I don't think it's fair to have to buy it over again for $100-200
    No, the recovery disks don't rely on anything on the hard drive.  From what you say, either you are not booting from the optical drive, or the disks indeed are faulty.
    The last I knew, replacement disks were $25.  See the sticky at the top of the General Discussion topic for details.
    There have been a lot of reports of problems with recovery disks, so I'm a bit surprised that Toshiba won't ship you replacements at no charge.  Might be worth another try, and an attempt to get to the next tech level.

  • Errors occurred while installing updates for  iTunes 11.1.4 on Windows VISTA

    I receive the message "errors occurred while installing updates" for  iTunes 11.1.4 on Windows VISTA.  What is the fix

    Hey applequilt,
    Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following resource may provide a solution:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Thanks,
    Matt M.

  • I am getting an error 7 (windows error 999) message and can't uninstall iTunes or install iTunes on my PC?

    I am getting an error 7 (windows error 999) message and can't uninstall iTunes or install new versions of iTunes on my PC? Any suggestions?

    Hi jschnurr,
    I recommend the steps in this article, including how to completely remove iTunes:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Cheers!
    - Ari

  • HT4759 I tried to download icloud for pc windows vista with 2.1.2. and when download was almost complete it said it belonged to another user unknown to me so I stopped the process how do I start over?

    I tried to download icloud for pc windows vista with 2.1.2 and when it was downloading almost finished it said it belonged to an unknown to me user?

    You need to explain that, before you finished downloading something said that it belonged to another user ?
    What said that, can you post a screenshot?

  • Error Code 8024200D while installing update KB3000850 for Windows 8.1

    Error Code 8024200D while installing update KB3000850 for Windows 8.1
    I have been prompted for the last 10 days to install the important update KB3000850 in my laptop, but the installation fails every time.
    Two days ago, on March the 12<sup>th</sup>, I installed 31 updates without any problem. What is wrong with this particular update?
    You will find below my dialogue with Microsoft Support Engineer, Mr Niranjan Manjhi, who referred me to you:
    Hi Michelle,
    Thank you for posting your query in Microsoft Community.
    I understand that you are unable to install the a specific update KB3000850. I will be happy to assist you with your query. Let me ask you;
    Is your computer connected to domain?
    Which security software is installed in the      computer?
    Do you remember making any specific change in the      computer prior to the issue?
    This November update rollup also includes all previous updates since the previous image update in April 2014 and this includes performance and reliability
    improvements.
    Cause:
    This issue occurs because a process keeps a file in the component store open. Therefore, the file cannot be deleted or overwritten. Let's try the methods below and
    check the status.
    Method 1: Depending on the architecture of your
    Windows 8.1 operating system, I would suggest you to install the following package first and then try installing the KB3000850.
    All supported x86-based versions of Windows 8.1: [link] Download the package now.
    All supported x64-based versions of Windows 8.1:
    [link] Download the package now. 
    Restart is required.
    Method 2:
    If the issue still persists, run the Windows Update Troubleshooter and check the status.
    Click to run
    [link] Windows Update Troubleshooter
    Also refer to:
    [link] Troubleshoot problems with installing updates
    Hope this information is helpful. Please feel free to reply in case you face any other issues with Windows in future.
    Regards,
    Niranjan Manjhi
    Dear Niranjan,
    Thank you for your answer.
    To answer your questions:
    1) Yes, my laptop is connected to the domain,
    2) My security software is McAfee Total Protection, the same I use for my PC running Windows 7 XP,
    3) I did not make any specific change to the laptop. It is true though that I run regularly McAfee´s QuickClean.
    In your answer, you suggested 2 methods for resolving the problem.
    I chose to apply first the second one, i.e. I ran once again the Windows Update Troubleshooter, which revealed again the following status:
    Potential Windows Update Database error detected Ox800F08F: Not fixed
    Windows Update components must be repaired: Fixed
    And a last information: Yesterday, McAfee´s Vulnerability Scanner was automatically activated, showing as "critical" the update in question ("important" according to Windows)!
    As for applying the first method you suggested, I will need the services of a professional, someone more IT literate than myself.
    Michelle
    Hi Michelle,
    Thank you for keeping us updated on the issue.
    Since the computer is connected to domain, I would request you to post your query in the TechNet forums as your question is beyond the scope of what
    is typically answered in this consumer forum and would be better suited for the IT Pro audience on TechNet.
    Please post your question in the link TechNet Forums.
    Regards,
    Niranjan Manjhi

    Hi there @Achintya-only
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
    I see that you are getting an error code, when you try to install Windows 8.1 from USB or DVD. I am happy to assist.
    Just to clarify, you are using a standalone Windows installation disk, you are not using a factory recovery image. Is that correct?
    Have you run the hardware diagnostics on your notebook? HP Notebook PCs - Testing for Hardware Failures (Windows 8)
    What operating system was on the system before, and have you made a set of recovery media, for your original factory installation?
    Please let me know what you find.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • HT1349 when i try to open itunes on my pc i get error msg msvcr80.dll followed by error 7 (win error 126)

    when i try to open itunes on my pc i get error msg msvcr80.dll followed by error 7 (windows error 126)

    This has been a very popular question the past 24 hours...best solution so far is that of tt2: https://discussions.apple.com/thread/5819124

  • HT5278 I have an iPhone 4, and I go to Settings, General, Software Update, and it says iOS 5.1.1 and I tap on the Install Now, and Agree, then i get the verifying update, and then it says "unable to install update, an error occured installing iOS 5.1.1

    I have an iPhone 4, and I go to Settings, General, Software Update, and it says iOS 5.1.1 and I tap on the Install Now, and Agree, then i get the verifying update, and then it says "unable to install update, an error occured installing iOS 5.1.1

    I have exactly the same problem.  iPhone 4S, never been jailbroken.  Not behind a firewall and it happens whether I am on my home compute (iTunes) or directly thru Settings_Update.
    Looks like loads of people are having the same problem - and as far as I can see, Apple's sole reply is jailbreak or behind firewall/ security settings/anti-virus.  None of those apply here!

  • I bought the APP Sasol Birds. 146MB of the 147,5MB downloaded without any problem. The download stopped and first the error code 3259 and later the error code 8012 appeared. Can someone help? I want the download to be completed. Thank you. Pieter Strobos

    I bought the APP Sasol Birds. 146MB of the 147,5MB downloaded without any problem. The download stopped and first the error code 3259 and later the error code 8012 appeared. Can someone help? I want the download to be completed. Thank you. Pieter Strobos

    Maybe your firewall or security software are preventing the download from finishing. You could try disabling them until you finish the download

  • Error occurred while installing updates. If problem persits, choose tools, download only and try installing manually

    error occurred while installing updates. If problem persits, choose tools, download only and try installing manually

    Are you able to update if you use an iTunesSetup.exe (or iTunes64Setup.exe) installler file downloaded from the Apple website?
    http://www.apple.com/itunes/download/

  • Have a first gen ipad. Can't download version 5.1 because iTunes 11.1 need to be downloaded. Cannot download version of iTunes. " errors occured while installing updates. if the problem persists choose tools download only and try installing manually"

    Have a first gen iPad with 4.3 IOS. Can't download version 5.1 because iTunes 11.1 need to be downloaded. Cannot download version of iTunes. " errors occured while installing updates. if the problem persists choose tools>download only and try installing manually". This is as far as I can get. Can't find tools to manually download. When I try to reset to factory settings, I get an error also.

    Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
    http://www.apple.com/itunes/download/

  • I installed Cloud on my desktop W8 pc but the window of Cloud is completly empty and white. I retrayed to install cloud but without success. What I can do? I'm a Cloud client from 2013.

    I installed Cloud on my desktop W8 pc but the window of Cloud is completly empty and white. I retrayed to install cloud but without success. What I can do? I'm a Cloud client from 2013.

    I installed Cloud on my desktop W8 pc but the window of Cloud is completly empty and white. I retrayed to install cloud but without success. What I can do? I'm a Cloud client from 2013.

Maybe you are looking for

  • Iphone deletes email by itself

    I have an iphone 3G and access my imap email account. All has been fine until this morning when all of a sudden the iphone deleted all emails that have been read on either the phone or the mac. They remain however on the mac in the email account inbo

  • While trying to load data Runtime Err UNCAUGHT_EXCEPTION Except.CX_RSR_X_ME

    Hi We are on BI.7 patch SAPKW70015 BI_CONT 703 - 0007 SAPKIBIIP7 and multi source system BI server. One is for R/3 it is already working and  another is for new IS Retail. While trying to load data to inventory (Z-cube) for first time in production s

  • IOS7 Numbers and Numbers 2.3

    I have a older macbook that I cannot upgrace to 10.9. I updated my ipad and along with it numbers, keynote and pages which I regularly use with dropbox for file sharing mostly from computer to ipad.  However, I edited a spreadsheet in numbers on my i

  • Dynamic Type Declaration

    Hi. I need to declare an internal table TYPE based on a dynamic table whose name at design time is unknown. I tried the following codes, but it is not working and generated an error: DATA: TXT_FILENAME_VALUE(14) TYPE C. FIELD-SYMBOLS: <FS_TXT_FILENAM

  • Business Objects XI R2 Active Directory

    <p>Currently we are implimenting AD single server sign on but have an issue in that the active directory "Please enter your Active Directory credentials" will not update with the active directory user.</p><p> </p><p>It appears that the BO XI is not e