Windows Vista - Sound Blaster 24 Bit Usb - No Microphone Playback Real Time Kara

Hi,
I don't no if this problem was just discussed in another thread, if so please giveme simply the link...
I'm Italian, so sorry for my poor english or bad translation...
PC: Laptop, "Toshiba Satellite A 200 24E"
OS: "Windows Vista Home Premium Service Pack " - All update done.
Dev.: "External Sound Blaster 24 Bit Usb" - Driver downloaded from Creative Web Site
At the very beginning I tried the internal Sound Card (Realtek) to do karaoke in spare time, but couldn't hear anything coming from Microphone. So I tried to buy an external sound card. The result is the same.
On "Record Device" I can see the Microphone Device, the level is on top, when I speak in the microphone I can see the green bar light up, if I record my voice I can hear myself when I playback, but no sound in real time.
I read that a lot of people have similar problems, but everone solves in a different manner...
I tried:
- I read in other forums advices about to do something like unmute microphone on "Audio playback devices" >> "Speaker" >> "Levels", but I don't see any checkbox, I can see only Speaker Level Bar...
- As read in other websites, to add a registry key (something like EnableInputMonitor in a specific path), but nothing changes. I cannot find other Device, not in Playback Devices, and not in Record Devices.
Please help, all was great with the same microphone, on old Packard Bell Laptop, old Sound Blaster mp3+ usb, and old Windows Xp.
If no solution, I 'm going on buy an old laptop with Windows xp, or an external Mixer, but I'm disappointed on spending more money...

well ?

Similar Messages

Bootcamp: Sound not working on Windows Vista Ultimate 32-bit

Hello everyone, I've got quite an unsual problem (whell at least I think anyway). On my iMac (Mid 2008, 2.4Ghz C2D, 2GB ram, 2400XT), I recently installed Windows Vista Ultimate (32 bit). I've been using the sound out of the speakers, until now when I decided to connect some extenal speakers. I have the bootcamp drivers installed (from Snow Leopard DVD). When I plugged the headphone jack into the headphone socket on the back, I noticed that the sound was still coming out of the speakers, so I opened the preferences and it showed that I had something plugged into the line-in jack- which I didn't! I removed the headphone jack from the headphone socket and plugged it into the line-in. Nothing changed in the preferences. So basically, Windows thinks the line-out port is line-in! I would appreciate some help with this issue, not sure how common it is!
Thanks :-)

Hi I'm not sure if this is going to help but have you got the service pack 1 installed on your laptop as when I installed it on my desktop the first time it caused blue screen errors and gave me loads of problems including error messages that seemed to come up with every application I opened and an annoying driver IQRL equal or less than but couldn't work out why and then in the end I had so many problems I had to totally reformat my desktop and I removed my XP scanner and webcam(both had vista drivers) and when I reinstalled the service pack 1 it was fine, so do you by any chance have anything attached to your laptop that was XP and has vista drivers as these seemed to be what was causing my errors.
Also a question about your graphic card drivers, I've got the same laptop as you and was looking for the graphic card driver updates and couldn't find them anywhere on the site, where did you find yours? I'm using Vista Home Premium 32 bit , my model number is A200-28P(PSAE6) and I'd love to know if there is a newer graphics card driver but can't find it on the knowledge base so the fact you've updated yours would you mind pointing a new user in the right direction :-)
Thanks,
Simreaper

Where to download driver for Sound Blaster EVO Usb Headset?

So where can I download driver for my Sound Blaster EVO USB (not Zx, not ZxR) headset driver? There was no CD that came with it. And when I tried to download it from creative it kept saying the site is not available. And I found out that it's been down for a while. So what is going on? Where can I download the driver for the headset? any help is appreciated.

Originally Posted by jincuteguy
So where can I download driver for my Sound Blaster EVO USB (not Zx, not ZxR) headset driver? There was no CD that came with it. And when I tried to download it from creative it kept saying the site is not available. And I found out that it's been down for a while. So what is going on? Where can I download the driver for the headset? any help is appreciated.
Hi jincuteguy,
Can you try one of these links for me?
For Windows: Click Here
For Mac: Click Here

T500 with Windows Vista Business 64-bit ---- AND NO SOLITAIRE

Does anyone know how I can get my "waiting pacifier", the very standard SOLITAIRE, that I have been playing for over 10 years? I want to install this on my Windows Vista Business 64-bit T500 notebook? I am not interested in buying a more fancy version of this.
Richard N. Kaufman

They're not installed by default on Vista Business edition, but they can easily be added:
http://www.lockergnome.com/blade/2007/02/18/microsoft-windows-vista-business-edition-where-are-the-g...

In Windows Vista business 64 bits...Itunes can't load data information class...

Can't sync Iphone 4 with Itunes versión 10.7.0.21, in Windows Vista business 64 bits. Already tried uninstalling and reinstalling and also finding sqlite3.dll and the other dll... and nothing. Renamed the sycservices folder and nothing, copied corefoundations.dll and folder to system32 and nothing...
This is becoming very annoying... any tips?.
Thanks.

Hi!,
    Thanks for your reply but I keep having the problem. I've been investigation through the Internet and I beleive is a COM situation or something is in conflict with iTunes, either way I manage to compare a similar environment (Win Vista 64 bits Business with iTunes running) and figured out that process "Syncserver.exe" is not running and neither is running "ATH.exe".
    I'm reading more about what could possible causing these two process from being executing as they should.
    Thanks.

Installing Windows Vista Ultimate 64 bit on Bootcamp issue

Hi I'm a newbie, I would like to install Windows Vista Ultimate 64 bit using boot camp. I went into boot camp to partition and split the 1 terabyte hardrive. half is for Leopard, the other half is for Windows Vista.
I followed the steps and popped in the disk, awhile later I get a message saying "Where do you want to install Windows?"
It's showing:
Disk 0 Partition 1 200 mb primary
Disk 0 Partition 2 466 gb Primary
Disk 0 unallocated space 128 mb
Disk 0 partition 3 Boot camp 464 gb Primary.
which ever one I click on it says "Windows Cannot be installed to this hard disk space. Windows must be installed to a partition formatted as NTFS"
I can't get passed this part, what do I do?
Any help is greatly appreciated

Hi Stuart,
Vista needs its system partition to be formatted with NTFS.
The BootCamp Asistant does a pre-format with FAT32 since OSX can not write to NTFS partitions (only read).
Therefor you have to reformat the Windows partition with the Vista Installer to NTFS.
See page 11 of the BootCamp Setup Guide found here http://www.apple.com/support/bootcamp/ (and it's also part of the BootCamp Assistant).
Regards
Stefan

LCES 8.2 Turnkey Install on "Intel Core i7 CPU 920 @2.67GHz 3GB Ram Windows Vista Home 64 bit"

Installed Java 1.5 SE (jdk-1_5_0_16-windows-amd64.exe) then set JAVA_HOME in system variable and set path to JAVA_HOME\bin etc.
During the Turnkey installation process in the LC Configuration Manager screen, process gets stuck with ACL-LCM-999-032 error.
Log from Configuration Manager is below:
Also I can not start the Windows service from Services , tried to set user too to use to start the service but no success please help, I can not proceed further.
Note: I downloaded jboss-4.2.0.GA fresh just to check if I can atleast start the default Jboss container on this machine and I can "run -c all" with no error.
Thanks
-yog
[2008-11-28 21:18:34,910], INFO, Thread-28, com.adobe.livecycle.lcm.feature.expressTurnkey.ExpressModeDialog, Sub Task Progress: [57%, Verifying ports required by service JBoss for Adobe LiveCycle ES are available]
[2008-11-28 21:18:41,925], INFO, Thread-28, com.adobe.livecycle.lcm.feature.expressTurnkey.ExpressModeDialog, Sub Task Progress: [59%, Starting service JBoss for Adobe LiveCycle ES]
[2008-11-28 21:18:52,173], INFO, Thread-28, com.adobe.livecycle.lcm.feature.deployment.DeployDSCs, Express mode processing complete
[2008-11-28 21:18:52,173], INFO, Thread-28, com.adobe.livecycle.lcm.feature.deployment.DeployDSCs, Express task finished, true:false
[2008-11-28 21:18:52,173], INFO, Thread-28, com.adobe.livecycle.lcm.feature.expressTurnkey.ExpressTurnkeyTask, Progress: Task[0, null] Step[100, 1/2 Express steps complete]
[2008-11-28 21:18:52,189], INFO, Thread-28, com.adobe.livecycle.lcm.feature.expressTurnkey.ExpressTurnkeyTask, Progress: Task[0, null] Step[0, ]

I able to successfully installed LCES 8.2.1 on i7 CPU 920 @2.67GHz 6GB Ram Windows Vista Ultimate 64 bit with Oracle 10g (on same PC)
it takes about 6 min to start the JBoss ( I wonder why 6 min but happy atleast passed the installation step) without BAM deployed.
Yog

Firefox 26 crashes on exit in Windows Vista Ultimate 32-bit.

It doesn't matter if I click the Red X, go under File -> Exit or type Alt + F4 to exit out of Firefox under Windows Vista Ultimate 32-bit. It almost always produces an error message that Firefox has stopped working.
I can't find how to post a JPEG Screenshot of the error message here.
This doesn't occur under Windows XP Pro.
Otherwise, the browser works fine under either OS.

Here's the screenshot(s). I had to take 2 because the lower portion of the error message that lists the details won't expand.

EBS R12 on Windows Vista with 32 bit

Hi,
Does anybody have installed EBS R12 (32 bit) on Windows Vista with 32 bit successfully?
I am aware that with Windows Vista 64 bits EBS R12 for Windows does not work.
Thanks,

Hi Hussien,
Thanks for your reply. I will not buy any type of Windows Vista for this purpose. I will buy a desktop PC with Windows XP Professional (32-bit) and with 500 GB. The Oracle Installation Guide recommends about 233 GB (dosk space) for a fresh install with a Vision Demo database. Do you think 500GB is more than enough for the initial install? Does it matter which processor I buy (AMD or Intel)? Do have any recommendation as to what processor should I buy (E series or Q series for Intel processor)?
Thanks again in advance.

ITunes won't install on Windows Vista? 32 bit

I have Windows Vista (the 32 bit) and after I got an iPhone I tried to sync it to my iTunes. But it said I needed a later version of iTunes (I had version 9.something). So after I downloaded iTunes 10.2.22 or whatever, whenever I tried to open iTunes I got a message that said, "ITunes did not install correctly". I uninstalled and did it again, only to get the same message. Help?

I have Windows Vista (the 32 bit) and after I got an iPhone I tried to sync it to my iTunes. But it said I needed a later version of iTunes (I had version 9.something). So after I downloaded iTunes 10.2.22 or whatever, whenever I tried to open iTunes I got a message that said, "ITunes did not install correctly". I uninstalled and did it again, only to get the same message. Help?

HP Windows Vista Business 64 bit recovery discs

I am looking to get recovery cd for my HP windows vista business 64 bit system. I am unable to boot in safe mode to do system restore.

Hi:
It doesn't look like you can get the disks from HP anymore.
You can still get them from this non-HP vendor at the link below.
http://www.computersurgeons.com/p-16921-recovery-kit-533108-zh3-for-hp-model-number-s5150t.aspx
If you can still read all 25 characters of the Vista Business product key on the COA sticker on your PC's case, and you like a challenge, you can make your own plain Vista Business installation media by reading the info at the link below.
You'll be able to save $30+ bucks if you can.
http://dellwindowsreinstallationguide.com/download-microsoft-windows-and-office/download-microsoft-w...

Creative Audigy 2 and Windows Vista: Sound volume turns down when I try to turn it

I have a strange problem with my audio in Vista. I have a Creative Audigy 2 and Creative 6700 speakers. My full system specification is below but please note I did not have this issue in my previous Vista build - its only happening since I did a reinstall. Anyway, when I swich on the speakers using the remote control unit for the 6700 speakers the sound comes on but then it turns down. I have to then increase the volume by a large amount for it to start playing sound again and then turn it down to listening volume. This issue is not application specific - it happens in everything: Winamp, WMP, games, etc etc?I'm using [color="#000000"]Creative Sound Blaster Audigy series Vista Driver 2.2.0002 and I've tried reinstall several times. I've tried doing diagnostic startup etc using msconfig in case something was conflicting and its still happening.
Has anyone got any ideas whats going on?Many thanks for your help!?System specifications:?MSI K8N SLI (MS-785 v..0) nForce4 Rev. A3
BIOS Phoenix Technologies 6.00PG
AMD FX-60 with Thermalright Ultra-20 Heatsink &?Scythe?20mm fan
Bus speed: 20MHz, Multiplier: x.0, Core Speed: 22 MHz
Corsair 2Gb: 2x Gb PC3200 RAM 28 bit dual channel mode & T command rate (2.5-3-3-8) with Thermaltake heatsinks
XFX 8800 GTS 640Mb XXX Edition
Hauppauge Nova T-500 dual tuner digital TV card
Seagate Barracuda 7200.9 500Gb
Optiarc AD-770S SATA DVD Writer
Xclio X2S4P4 750WModular SLi U-Quiet PSU
Lian Li PC-A0A aluminum case
Dell E228WFP (Two in dual display)
Microsoft Wireless Laser Mouse 8000
Microsoft Digital Media Pro keyboard
Windows Vista Ultimate 32bit Edition?Message Edited by DistortedVision on 05-25-200706:4 PM

Have you checked the volume button? It might be physically stuck. To determine whether a hardware repair is needed, you need to follow these steps:
1. Try doing a hard reset:
Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
After that: test the device to see whether the issue is solved.
2. If the issue is not solved, you should backup the device and restore it as new.
In that case, use: http://support.apple.com/kb/HT4137
NB: set up as a NEW device because a software issue will be in the backup.
If the issue persists after restoring as new, you should offer the device for service.
If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694 for causes and solutions
Good luck
Stijn

Solved Crackling Problem in Windows 7 (SB 24-bit USB External, HP Pavilion dv6 1124-ca laptop).

I'm one of many users who has had problems with the sound crackling problem with their sound card after upgrading to Windows 7.
I was previously on Windows Vista running 5. with 24-bit, 96000Hz sample rate Studio Quality with no problems at all. When I upgraded to Windows 7 RC, Windows was able to automatically find a driver for my external USB sound card, but when playing music, I always got a constant crackling sound coming from the speakers while trying to put the card in anything above 2. or and when putting it in 24-bit 96000Hz, the crackling only got worse. Installing the Beta drivers on the Creative site didn't work either... still had the crackling. I searched around for the past several months for solutions to no avail.
Then today, I was surfing the HP website (I have a HP Pavilion dv6 24-ca laptop) to see if they had added Windows 7 drivers to their support site and they did... and so I started downloading all available Windows 7 drivers for my specific laptop. When I first installed Windows 7 RC, it had installed it's own drivers for everything (on-board sound etc.). After replacing the Windows 7 installed "High Definition Audio Device" drivers with the HP supplied "IDT High Definition Audio CODEC" drivers... I'm not sure if the on board sound driver has anything at all to do with the crackling on the Soundblaster but I replaced the drivers anyway. I also installed another driver called "AMD USB Filter" that was supplied by the HP website for Windows 7 which is another driver that I thought might help with the problem. Other drivers installed were "ENE CIR Reciever Driver" and "Realtek Card Reader Driver" but those have nothing to do with the sound card.
After installing the drivers from the HP website, I no longer get the crackling from the speakers when playing in 5.. I am also now able to select 24-bit 96000Hz sample rate without crackling as well I am very happy to have finally solved the problem. So to anyone having similar problems, I suggest you check out your manufacturers website to see if they have any drivers available for you... I have a feeling the AMD USB Filter is what solved the problem... but who knows.
Hope this helps other HP users!

Try this video let me know if it helps you out.
http://www.youtube.com/watch?v=9M-1Bx-7_zI
If you can hear the music through the speakers but not the headphones I would suggest using an AUX cable because seems the sound isn't being transmitted over.
Just a friendly note here. Don't buy the wireless turtle beaches I have the x32s and I'm continuously buying batteries !
THX

Windows 98 Sound Blaster H

We recently had to re-fromat the hard dri've on an old computer running Windows 98. Our sound blaster software has been lost in our move and I am trying to download the latest drivers for Windows 98. Can someone point me in the right direction?

I have a Sound Blaster Li've! 24-bit for Windows 98 - Model SB040.Creative no longer has the drivers available based on what I can tell. I tried to search based on the model and this is the message I gotDriver unavailable:[img"]http://93.95.7.84/Servicesoft/Data/WW_TS/TemplateSets/ww_english/drivers_case/no_driver_audio.png" alt="Driver unavailable">Unfortunately there is no driver available for this operating system?Any suggestions other than throwing an old but perfectly good computer away becuase I can get the sound to work for my kids to play some very basic computer games. Thanks for any help you can lend!Kate

Windows XP Sound Blaster Audigy FX Support

How do I get my Sound Blaster Audigy FX to work with Windows XP. First it doesn't find the device. Then the cd that came with it says it needs Windows Vista to work. Please Help!

joyalton wrote:
I have a new Emachine T3508 512MB with Windows XP (I plan to add a second 512MB). I also plan to purchase/upgrade with the Sound Blaster Audigy SE sound card. Is the Creative Inspire T3030 2.1 Speaker System compatible with my T3508 & the Sound Blaster? I think it should be but I wanted to hear it from someone who knows more than I do. Thanks guys.
To be honest, this is a pointless post. You're going to have to check your machine to see if there's an additional PCI slot that can take on the audigy SE. If so, then you already know your inspire t3030 can be used. Even the onboard sound with your motherboard should be able to take it on (assuming your emachines PC has onboard sound). I hate buying emachines, HP, and Compaq PCs they lack expandability.

Windows Vista - Sound Blaster 24 Bit Usb - No Microphone Playback Real Time Kara

Similar Messages

Maybe you are looking for