Windows Vista Stuck in Infinite Reboot Loop

After going on some websites which I've used and know are reputable, my computer completely froze, so I manually powered it down using the power button. After starting it up again and signing in, the computer randomly restarted with no BSOD or and prior
warning. It gives the default, "Shutting Down" sign, and starts back up. Trying to disable the function of automatically restarting when a fatal error occurs by the advanced settings from the HDD, and also the use of the f8 for advanced boot options,
the computer still restarts without giving the BSOD or any sort of information why. 
I've tried running safe mode, but the computer will still restart and not boot in safe mode. Even when the computer is left idle on the user selection screen, it will restart. 
I'm looking for the cause of the problem and a fix to it would also be very helpful and appreciated.
Thanks,
Mikael Suorsa

That doesn't fix it

Similar Messages

  • PRS-T1 stuck in infinite reboot loop after failed firmware update

    Hi,
    I tried to update the firmware, but failed when updating to version 1.0.07.05070. Tried to 2 times. The first time it failed I simply tried again. The second time, it took a lot longer to reach the failed to update message, but it did cause the ereader to reboot.
    Now, it's stuck in an infinite reboot loop on the "Opening book" page. The progress bar on that page stays completely empty, lasts for about 30 seconds, and reboots again. This will go one until the battery is dead or indefinitely if plugged in. 
    I have tried pressing the Home + Menu buttons, but they seem to have no effect.
    Please advise if there is anything I can try to revive it?
    Thanks in advanced.
    David
    Solved!
    Go to Solution.

    Kiroken,
    Here is what I have observed:
    - After a hard boot (reset + power button during 3+ seconds), if I don't do anything, it will reboot every ~30seconds.
    - If I press and hold the Home and Menu buttons, no effect. The same as if I didn't press anything.
    - If I press the Forward + Back buttons (2 & 4), it does not reboot after 30 seconds. Instead, the orange light on the power button blink every ~2-3 seconds.
    - Any other key combinations that I have tried have no effect.
    I have tried with and without several rescue sdcard. No difference. No improvement. In every case, the computer never sees the reader. If plugged into the power outlet, it seems like the battery charges alright. It does not appear to charge if plugged into USB port.
    That's all I know. If I can't fix it, I might be forced to turn it into a coaster or maybe a cutting board for the kitchen.
    David

  • IPhone 3GS stuck in infinite reboot loop

    Hi
    Today my iPhone 3GS ran out of power, and i charged it via the wall plug. After it was turned on, it started reboot every couple of minutes, and has done this for hours now. I tried shutting it down and starting it again but that didn't help. It hasn't been jailbroken or anything like that. It runs iOS 5.0.1.
    Any suggestions for what i can do to fix this problem?

    That doesn't fix it

  • I was told by itunes my phone needed an update to 6.1.2.  I did it, and now my phone is stuck in a reboot loop, and no wifi, phone, or bluetooth.

    I connected my 3gs to my computer, and got a popup from itunes saying there was an update for my phone.  Well i like to keep everything up to date, so I did the update.  After it completed, I no longer have phone, Wifi, and bluetooth.  It also is stuck in a reboot loop.  I really do not know what I can do.  I tried to restore it as a new phone, since i had all my data backed up.
    Any help or ideas is greatly appreciated.

    ccsoh wrote:
    okay i may have called it wrong, we got the unlock from AT&T when our contract was up.  We did this because we were thinking of switching to another carrier.
    I checked the hosts file, and there is nothing refering to gs.apple.com.  Should there be?
    Is it possible to restore it back to 6.1?
    No problem; it's just that many people buy what they think are "factory unlocked" phones, but the "factory" is the back room of the shop where they bought it.
    gs.apple.com should not be in the hosts file (the only reason it might be there is if some hacking tool had been used on the computer in the past; not just jailbreaking tools, but tools to downgrade the OS and perform other unsupported functions).
    You cannot restore back to 6.1; you need to resolve the problem with the latest version. Even if you could revert it would not solve the problem. You need to figure out why iTunes can't communicate with the activation servers. If you have another computer, try restoring on that, or take the phone to an Apple store and let a "genius" deal with it. Or, if your antivirus is Kaspersky, delete it completely, as it's impossible to turn it off completely, and it has taken a dislike to things Apple.

  • Sr5604f updated windows vista but now it reboots the config over and over

    need hip,,pls help    sr5604f updated windows vista but now it reboots the config over and over

    need hip,,pls help    sr5604f updated windows vista but now it reboots the config over and over

  • My iphone 4 is stuck in a reboot loop and won't stop. Any ideas?

    It froze during a message. I went to restart it and it didn't finish restarting, tried again and got a white screen. Now it's stuck in a reboot loop and I can't get it to stop.

    First, plug your iPhone into your cpmputer. Then, press and hold the Home+Power buttons for around 10 seconds, then release the power button but continue holding the Home button, until you see a pop up in iTunes. Then, restore your iPhone.

  • Need help plz my iphone is stuck in a reboot loop

    my iphone is stuck in a reboot loop i cant get it to stop itunes dose not detect
    my iphone so i can restore it i don't know what to do plz help

    I am experiencing the same problem, and i have attempted NO jailbreak or other iphone hacked software. My screen will slowly fade to white, and then go into an endless reboot cycle, or just glow bright white til the battery dies. I have tried restoring with itunes via recovery, and i receive error (2003).
    (EDIT)
    I successfully restored my iphone, and it worked GREAT! until i removed it from the cradle, and my screen jumped straight to apple logo, descending into the bottomless pit of reboot cycles.
    Message was edited by: detri

  • N9 Stuck in a Reboot loop

    Hey ppl
    My N9 is stuck in a reboot loop
    Havent done any kinda mod to the phone just installed some apps.
    When the phone starts and boots up to home screen, the screen goes blank then re appears then again goes blank n re appears n then the phone restarts. In that short period when the home screen is available if i go in to settings then the phone becomes stable and works fine. But if if it goes in to sleep mode then again it restarts.
    I have no clue whats wrong here. I guess i need to reflash the phone now.
    If any one has done that can u plz guid me stpt by step how it can be done.
    Also if you know any alternate fix.

    @iceman331
    Firstly, have you tried using Nokia Suite Beta from Nokia Beta Labs to try re-installing existing device software as device put into test mode to re-install so hopefully would not go to sleep?http://betalabs.nokia.com/trials/nokia-suite-beta
    Whislt it may not be appreciated if I spell out chapter and verse how to carry out this procedure upon the forum I have recovered my own N9 from "Boot loop", although in my case homescreen was never available!
    http://discussions.nokia.com/t5/Maemo-and-MeeGo-Devices/N9-not-booting/m-p/1257649/highlight/true#M3...
    Keep me posted how you are fairing with this issue or if you require further assistance.
    Check you PM Inbox at top right of screen.
    Happy to have helped forum with a Support Ratio = 42.5

  • Blackberry torch 9800 is stuck in a reboot loop

    My Blackberry torch 9800 is stuck in a reboot loop tried all fixes nothing works, desk top manager wont fix, nor will a download of OS, sounds like a common problem can anyone help!

    here is a log it doesnt make any sense to me but maybe it does to someone else on this forum hope it helps!!
    RimBaseException (Failed to open java loader session.) created
    (3420) 2012-08-07 00:10:28.792 INFO     BASECMD      Commands   No resources to close for device: [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)] [NessusCommand BDNessusInstallBundleCommand [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]]...
    (3420) 2012-08-07 00:10:28.794 INFO     BASECMD      Commands   Opening JL session for device [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]. [NessusCommand BDNessusInstallBundleCommand [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]]
    (3420) 2012-08-07 00:10:28.795 INFO     JAVALOADER   Commands   Requesting JL connect [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]
    (3420) 2012-08-07 00:10:28.862 ERROR*** JAVALOADER   Commands   JL Session error message: HRESULT error during Open: bc000002
    (3420) 2012-08-07 00:10:32.651 INFO     EventDisp               ***---------  Device disconnected via USB Device: \\?\USB#Vid_0fcaPid_0001&MI_00&0107 PIN 0 GUID 1E1D57483225E162014D62CB7811CAD33E249F40 Location ID 4100000 Power 500
    (3420) 2012-08-07 00:10:32.661 WARN**   RECOVER                 Ignoring expected device disconnect event 1 [NessusCommand BDNessusRecoverDeviceCommand [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]]
    (3420) 2012-08-07 00:10:32.663 WARN**   EventDisp               Device disconnect consumed by [NessusCommand BDNessusRecoverDeviceCommand [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]]
    (3420) 2012-08-07 00:10:33.863 ERROR*** JAVALOADER   Commands   JL Session error message: OSStatus error during Close: -29296
    (3420) 2012-08-07 00:10:33.901 INFO     JAVALOADER   Commands   Completed  JL connect [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]
    (3420) 2012-08-07 00:10:33.901 ERROR*** JAVALOADER   Commands   Failed to open java loader session with error: 3
    (3420) 2012-08-07 00:10:33.901 ERROR*** default      Commands   Exception RimDeviceSessionConnectException -- BDRimBaseException (Failed to open java loader session.) created
    (3420) 2012-08-07 00:10:34.905 INFO     BASECMD      Commands   No resources to close for device: [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)] [NessusCommand BDNessusInstallBundleCommand [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]]...
    (3420) 2012-08-07 00:10:34.908 INFO     BASECMD      Commands   Opening JL session for device [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]. [NessusCommand BDNessusInstallBundleCommand [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]]
    (3420) 2012-08-07 00:10:34.909 INFO     JAVALOADER   Commands   Requesting JL connect [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]
    (3420) 2012-08-07 00:10:34.910 INFO     JAVALOADER   Commands   Completed  JL connect [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]
    (3420) 2012-08-07 00:10:34.910 ERROR*** JAVALOADER   Commands   Failed to open java loader session with error: 3
    (3420) 2012-08-07 00:10:34.910 ERROR*** default      Commands   Exception RimDeviceSessionConnectException -- BDRimBaseException (Failed to open java loader session.) created
    (3420) 2012-08-07 00:10:35.913 INFO     BASECMD      Commands   No resources to close for device: [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)] [NessusCommand BDNessusInstallBundleCommand [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]]...
    (3420) 2012-08-07 00:10:35.915 INFO     BASECMD      Commands   Opening JL session for device [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]. [NessusCommand BDNessusInstallBundleCommand [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]]
    (3420) 2012-08-07 00:10:35.916 INFO     JAVALOADER   Commands   Requesting JL connect [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]
    (3420) 2012-08-07 00:10:35.917 INFO     JAVALOADER   Commands   Completed  JL connect [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]
    (3420) 2012-08-07 00:10:35.917 ERROR*** JAVALOADER   Commands   Failed to open java loader session with error: 3
    (3420) 2012-08-07 00:10:35.917 ERROR*** default      Commands   Exception RimDeviceSessionConnectException -- BDRimBaseException (Failed to open java loader session.) created
    (3420) 2012-08-07 00:10:36.922 INFO     BASECMD      Commands   No resources to close for device: [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)] [NessusCommand BDNessusInstallBundleCommand [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]]...
    (3420) 2012-08-07 00:10:36.928 INFO     BASECMD      Commands   Opening JL session for device [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]. [NessusCommand BDNessusInstallBundleCommand [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]]
    (3420) 2012-08-07 00:10:36.929 INFO     JAVALOADER   Commands   Requesting JL connect [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]
    (3420) 2012-08-07 00:10:36.930 INFO     JAVALOADER   Commands   Completed  JL connect [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]
    (3420) 2012-08-07 00:10:36.930 ERROR*** JAVALOADER   Commands   Failed to open java loader session with error: 3
    (3420) 2012-08-07 00:10:36.930 ERROR*** default      Commands   Exception RimDeviceSessionConnectException -- BDRimBaseException (Failed to open java loader session.) created
    (3420) 2012-08-07 00:10:37.934 INFO     BASECMD      Commands   No resources to close for device: [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)] [NessusCommand BDNessusInstallBundleCommand [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]]...
    (3420) 2012-08-07 00:10:37.935 INFO     BASECMD      Commands   Opening JL session for device [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]. [NessusCommand BDNessusInstallBundleCommand [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]]
    (3420) 2012-08-07 00:10:37.936 INFO     JAVALOADER   Commands   Requesting JL connect [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]
    (3420) 2012-08-07 00:10:37.937 INFO     JAVALOADER   Commands   Completed  JL connect [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]
    (3420) 2012-08-07 00:10:37.938 ERROR*** JAVALOADER   Commands   Failed to open java loader session with error: 3
    (3420) 2012-08-07 00:10:37.938 ERROR*** default      Commands   Exception RimDeviceSessionConnectException -- BDRimBaseException (Failed to open java loader session.) created
    (3420) 2012-08-07 00:10:38.941 INFO     BASECMD      Commands   No resources to close for device: [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)] [NessusCommand BDNessusInstallBundleCommand [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]]...
    (3420) 2012-08-07 00:10:38.943 INFO     BASECMD      Commands   Opening JL session for device [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]. [NessusCommand BDNessusInstallBundleCommand [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]]
    (3420) 2012-08-07 00:10:38.944 INFO     JAVALOADER   Commands   Requesting JL connect [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]
    (3420) 2012-08-07 00:10:38.945 INFO     JAVALOADER   Commands   Completed  JL connect [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]
    (3420) 2012-08-07 00:10:38.945 ERROR*** JAVALOADER   Commands   Failed to open java loader session with error: 3
    (3420) 2012-08-07 00:10:38.945 ERROR*** default      Commands   Exception RimDeviceSessionConnectException -- BDRimBaseException (Failed to open java loader session.) created
    (3420) 2012-08-07 00:10:39.949 INFO     BASECMD      Commands   No resources to close for device: [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)] [NessusCommand BDNessusInstallBundleCommand [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]]...
    (3420) 2012-08-07 00:10:39.955 INFO     BASECMD      Commands   Opening JL session for device [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]. [NessusCommand BDNessusInstallBundleCommand [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]]
    (3420) 2012-08-07 00:10:39.956 INFO     JAVALOADER   Commands   Requesting JL connect [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]
    (3420) 2012-08-07 00:10:39.957 INFO     JAVALOADER   Commands   Completed  JL connect [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]
    (3420) 2012-08-07 00:10:39.957 ERROR*** JAVALOADER   Commands   Failed to open java loader session with error: 3
    (3420) 2012-08-07 00:10:39.957 ERROR*** default      Commands   Exception RimDeviceSessionConnectException -- BDRimBaseException (Failed to open java loader session.) created
    (3420) 2012-08-07 00:10:40.961 INFO     BASECMD      Commands   No resources to close for device: [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)] [NessusCommand BDNessusInstallBundleCommand [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]]...
    (3420) 2012-08-07 00:10:40.963 INFO     BASECMD      Commands   Opening JL session for device [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]. [NessusCommand BDNessusInstallBundleCommand [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]]
    (3420) 2012-08-07 00:10:40.964 INFO     JAVALOADER   Commands   Requesting JL connect [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]
    (3420) 2012-08-07 00:10:40.965 INFO     JAVALOADER   Commands   Completed  JL connect [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]
    (3420) 2012-08-07 00:10:40.965 ERROR*** JAVALOADER   Commands   Failed to open java loader session with error: 3
    (3420) 2012-08-07 00:10:40.965 ERROR*** default      Commands   Exception RimDeviceSessionConnectException -- BDRimBaseException (Failed to open java loader session.) created
    (3420) 2012-08-07 00:10:41.969 INFO     BASECMD      Commands   No resources to close for device: [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)] [NessusCommand BDNessusInstallBundleCommand [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]]...
    (3420) 2012-08-07 00:10:41.971 INFO     BASECMD      Commands   Opening JL session for device [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]. [NessusCommand BDNessusInstallBundleCommand [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]]
    (3420) 2012-08-07 00:10:41.972 INFO     JAVALOADER   Commands   Requesting JL connect [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]
    (3420) 2012-08-07 00:10:41.973 INFO     JAVALOADER   Commands   Completed  JL connect [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]
    (3420) 2012-08-07 00:10:41.973 ERROR*** JAVALOADER   Commands   Failed to open java loader session with error: 3
    (3420) 2012-08-07 00:10:41.973 ERROR*** default      Commands   Exception RimDeviceSessionConnectException -- BDRimBaseException (Failed to open java loader session.) created
    (3420) 2012-08-07 00:10:42.982 INFO     BASECMD      Commands   No resources to close for device: [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)] [NessusCommand BDNessusInstallBundleCommand [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]]...
    (3420) 2012-08-07 00:10:42.985 INFO     BASECMD      Commands   Opening JL session for device [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]. [NessusCommand BDNessusInstallBundleCommand [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]]
    (3420) 2012-08-07 00:10:42.986 INFO     JAVALOADER   Commands   Requesting JL connect [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]
    (3420) 2012-08-07 00:10:42.987 INFO     JAVALOADER   Commands   Completed  JL connect [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]
    (3420) 2012-08-07 00:10:42.987 ERROR*** JAVALOADER   Commands   Failed to open java loader session with error: 3
    (3420) 2012-08-07 00:10:42.987 ERROR*** default      Commands   Exception RimDeviceSessionConnectException -- BDRimBaseException (Failed to open java loader session.) created
    (3420) 2012-08-07 00:10:43.991 INFO     BASECMD      Commands   No resources to close for device: [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)] [NessusCommand BDNessusInstallBundleCommand [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]]...
    (3420) 2012-08-07 00:10:43.993 INFO     BASECMD      Commands   Opening JL session for device [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]. [NessusCommand BDNessusInstallBundleCommand [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]]
    (3420) 2012-08-07 00:10:43.996 INFO     JAVALOADER   Commands   Requesting JL connect [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]
    (3420) 2012-08-07 00:10:43.997 INFO     JAVALOADER   Commands   Completed  JL connect [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]
    (3420) 2012-08-07 00:10:43.998 ERROR*** JAVALOADER   Commands   Failed to open java loader session with error: 3
    (3420) 2012-08-07 00:10:43.998 ERROR*** default      Commands   Exception RimDeviceSessionConnectException -- BDRimBaseException (Failed to open java loader session.) created
    (3420) 2012-08-07 00:10:45.003 INFO     BASECMD      Commands   No resources to close for device: [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)] [NessusCommand BDNessusInstallBundleCommand [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]]...
    (3420) 2012-08-07 00:10:45.005 INFO     BASECMD      Commands   Opening JL session for device [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]. [NessusCommand BDNessusInstallBundleCommand [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]]
    (3420) 2012-08-07 00:10:45.006 INFO     JAVALOADER   Commands   Requesting JL connect [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]
    (3420) 2012-08-07 00:10:45.007 INFO     JAVALOADER   Commands   Completed  JL connect [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]
    (3420) 2012-08-07 00:10:45.007 ERROR*** JAVALOADER   Commands   Failed to open java loader session with error: 3
    (3420) 2012-08-07 00:10:45.007 ERROR*** default      Commands   Exception RimDeviceSessionConnectException -- BDRimBaseException (Failed to open java loader session.) created
    (3420) 2012-08-07 00:10:46.011 INFO     BASECMD      Commands   No resources to close for device: [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)] [NessusCommand BDNessusInstallBundleCommand [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]]...
    (3420) 2012-08-07 00:10:46.018 INFO     BASECMD      Commands   Opening JL session for device [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]. [NessusCommand BDNessusInstallBundleCommand [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]]
    (3420) 2012-08-07 00:10:46.019 INFO     JAVALOADER   Commands   Requesting JL connect [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]
    (3420) 2012-08-07 00:10:46.020 INFO     JAVALOADER   Commands   Completed  JL connect [Device name:BlackBerry Torch 9800 pin:0x0 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]
    (3420) 2012-08-07 00:10:46.020 ERROR*** JAVALOADER   Commands   Failed to open java loader session with error: 3
    (3420) 2012-08-07 00:10:46.020 ERROR*** default      Commands   Exception RimDeviceSessionConnectException -- BD(3420) 2012-08-07 00:29:52.265 INFO     EventDisp               ***---------  Device connected via USB Device: \\?\USB#Vid_0fcaPid_8004&MI_00&0211 PIN 679217637 GUID 1E1D57483225E162014D62CB7811CAD33E249F40 Location ID 24100000 Power 500
    (3420) 2012-08-07 00:29:52.265 INFO     default                 USB device PID: 0x8004, bootrom metrics: 472 bytes
    (3420) 2012-08-07 00:29:52.266 DEBUG    EventDisp               ***--------- Device CONNECTED: {     BBPIN = 679217637;     "BR Metrics" = <10000600 d8010000 0d000a05 07180005 52494d20 426c6163 6b426572 72792044 65766963 65000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 65635f61 67656e74 00000000 00000000 4a756c20 32322032 30313000 00000000 31303a30 313a3331 00000000 00000000 00010f00 09000000 00000000 b0000000 14000000 d8000000 40000000 24000000 046f025c 00000200 04000000 01000000 012202d8 03020404 072f0b01 0c060d09 37013b05 41014601 ffffffff ffffffff ffffffff ffffffff 4a56be92 18000100 1d0c0000 00000000 d0070000 180c0000 00000000 00000000 19080000 02000000 1a080000 c4070000 1e0c0000 c5070000 d0070000 230c1a00 000000b0 ffffffbf 230c1a00 000000c0 ffffffcf 09080000 1b16a20b ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff>;     DeviceName = "\\\\?\\USB#Vid_0fcaPid_8004&MI_00&0211";     "Extended Properties Version" = 1;     GUID = 1E1D57483225E162014D62CB7811CAD33E249F40;     HubAddress = 24100000;     "MUX Version" = 2.007812;     NetworkType = 7;     "OS Metrics" = <12000300 cc010000 000000b8 383c2bb9 fcff4abf 65635f61 67656e74 00000000 00000000 4a756e20 20332032 30313100 30333a33 373a3338 00000000 52494d20 426c6163 6b426572 72792044 65766963 65000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 07180005 df000606 ec0bf9d0 bc2390b8 00000000 880300b8 242d00b8 0001ffff 93e1d0c3 f4000000 14000000 f8207ab8 00000000 44010000 20000000 0000000a 00000000 b8cc84b8 21000200 08000000 03009500 8482dfb8 04e20005 00000000 00000000 1c0ad1b8 64010000 68000000 fcff5fbe 00000000 01010cff 040100ff 0201d7ff 0d010909 03010002 07012fff 0b0100ff 3c0001ff 3b0100ff ff000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 362e362e 302e3232 33000000 00330014 001f0108 0058405e 0078405e 00a0405e 03009500 01000100 04e20005 04000300 0000000a 02000000 11020000 05000500 00000100 08000100 00000100 09000100 00000100 0a000100 21000200 03000100 11000200 07000100 01000000 0b000100 55000304 06000200 00000000 00000000 00000000 00000000>;     "OS Type" = 0;     Power = 500;     "Product ID" = 32772;     "USB Vendor ID" = 4042;     "Vendor ID" = 301;     kDeviceDriverKey = 1;     kDeviceHasJVMKey = 1;     kDevicePhysicalConnectionKey = 1; }
    (3420) 2012-08-07 00:29:52.267 DEBUG    CFP                     Device Attached
    (3420) 2012-08-07 00:29:52.267 DEBUG    CFP                     ... don't care -- not looking for specific device
    (3420) 2012-08-07 00:29:52.269 DEBUG    EventDisp               Device connected:  [Device name:BlackBerry Torch 9800 (287C09E5) pin:0x287C09E5 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]
    (3420) 2012-08-07 00:29:52.270 WARN**   RECOVER                 Device connected while updating device  [Device name:BlackBerry Torch 9800 (287C09E5) pin:0x287C09E5 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]
    (3420) 2012-08-07 00:29:52.271 WARN**   EventDisp               Device connect consumed by [NessusCommand BDNessusRecoverDeviceCommand [Device name:BlackBerry Torch 9800 (287C09E5) pin:0x287C09E5 model:BlackBerry Torch 9800 hardwareID:0x5001807 GUID: 1E1D57483225E162014D62CB7811CAD33E249F40 - appsnull) platformnull)]]

  • MSI z77a-G45 Infinite Reboot Loop

    Hello,
    Here are my system specs:
    Core i5 3570K
    Hyper212 Plus
    Intel 330 180 GB SSD (with OS on it)
    WD 1TB Black (for data)
    MSI z77a-G45 motherboard
    G.Skill Ripjaws 8 GB RAM
    EVGA GTX 660 FTW Signature 2
    Corsair TX650m PSU
    Lite-on iHAS124-04 Optical DVD Drive
    Corsair 200R case
    I should mention the following up front: I don't know what is causing my problem, but my guess is it's either PSU or motherboard.
    Nothing in my system is overclocked (except for the fact that my GTX 660 card comes factory OC'd). Here is my issue. Yesterday, I shut down my computer and everything was normal. I didn't change anything at all. Today in the evening, I tried to power on my computer, and it simply goes into an infinite reboot loop. I don't see anything on the monitor, nothing comes up. The computer powers on for about 10 seconds, and then powers off for about 5-6 seconds, and it keeps repeating this process. Actually getting this process to stop is a bit tricky (I think I have to hold down the power button for several seconds when the computer is off). Does anyone have any ideas? I've tried a few things, like checking to make sure the 8 pin and 24 pin cables are tight. I've tried resetting CMOS and taking out the CMOS battery. Ideas? Thank you.

    Hi guys. I know this thread is 2 and a half months old but I need to find a solution to this problem. It may have been better to start a new thread, excuse me for not doing it as my problem is quite similar.
    Well, my situation is a bit different and I will explain it shortly but first I'll give you my PC specs.
    MSI Z77A-G45
    Intel i5-3570
    Corsair DDR3 8GB (2x4)Kit 1600MHz Vengeance
    Nvidia GeForce 9800GT
    So when I assembled my PC I put one RAM in DIMM2 and the other in DIMM4. This led to an infinite reboot loop. The fans and the leds were working but nothing was displayed on the screen. After doing some tests removing and inserting again the RAMs with different combinations I came to the conclusion that this infinite reboot loop is occurring when a RAM is inserted either in DIMM1 or DIMM2. My PC works fine if I connect the RAMs in DIMM3 and DIMM4 but not with the DIMM1-DIMM3, DIMM1-DIMM4, DIMM2-DIMM3, DIMM2-DIMM4 combinations.
    At first I thought one of my RAMs might be corrupt but after the tests I see that both work fine and I'm starting to believe that the Motherboard has the problem.
    Any ideas? This is really frustrating.

  • Satellite L500-1DT: HDD Recovery of Win 7 is stuck in endless reboot loop

    This is a detailed bug report so please bear with me.
    If you can help, or can confirm you've had the same happen to you, I'll be grateful.
    I've owned several Toshiba laptops before and I even used to work for Toshiba so rest assured I like the machine. But I've got a problem with its recovery software. I just bought a laptop, Satellite L500-1DT with Windows 7 64 bit, on behalf of a non-techie who lives elsewhere. Since I know from experience that I will occasionally have to field panic calls along the lines of "it's become too slow", "how do I get rid of the accumulated junk", "maybe it's got a virus" and so on, the first thing I checked was the automatic recovery, i.e. how to bring the HD back to "as new" state.
    So I booted into the machine, answered the questions until I got into the OS proper, and then ran the "make a recovery DVD" program. Double layer DVD verified ok. With the freshly made DVD, I swapped the supplied HD for a spare I had (much smaller: only 40 GB instead of 320) and booted the rescue DVD hoping that it would remake me a clean system on the blank drive.
    It did repartition the drive according to its scheme, with more or less half the space for Windows and the other half for Data including the recovery files. It did install the system in the Windows partition. It then rebooted into the installed Windows 7 to finalize the installation. There, trouble began: an endless loop of reboots for hours until I stopped it.
    Loop:
    * reboot
    * black screen with bright 4-colour windows logo "starting windows"
    * black screen with light blade and "setup is preparing your computer for first use"
    * blue "welcome" white screen with "please wait" and horizontal bar with green blob, saying "Finishing the installation may take several minutes. Please dont interrupt or shutdown the computer!"
    * blue screen saying it's shutting down
    Repeat the above forever.
    I have seen it reboot way over 10 times over the course of several hours. And every time it pretends it's the first time it does that. Surely that's not normal!
    I tried stopping it with ctrl-alt-del and task manager but the white screen would go on top of even the task manager, making it hard to kill any processes or even inspect what they were. I stopped it by holding down the power button until it switched off. Then when it rebooted it said if I wanted safe mode. I tried that. It went into the routine above and at some point it said it couldn't proceed with the installation if it was in safe mode. So it rebooted into regular mode and then... finished! It finally broke out of the endless loop!
    Then it asked me all the usual questions about language, registration etc, as it had done the first time I had turned it on. This seemed good. I finally got back into a newly installed OS and all seemed fine, except I later discovered that some programs that were there before were not installed.
    With bravery bordering stupidity (*) I even re-did the procedure on the supplied hard disk instead of my spare one: first I nuked the windows partition, then I did rescue from the HD (with F8), not with the DVD I had made. Result: similar rigmarole, with endless reboots.
    After I stopped it, it sort-of-worked, as above, but now some other programs were missing, notably the Toshiba DVD player.
    (*) motivated by: better try this now, with the computer here and all my tools and other computers ready at hand, than when the computer is away at its owner's home and that's the only thing left to try with me at the other end of a phone line. Been there before.
    Now, that specific one (DVD player) I could download from the support page and it installed fine; but what else might be missing or not working that I didn't notice? Clearly the restore process isn't working as it should.
    Am I the first or only one to whom this happens? Am I doing anything wrong? Is there anything else I should try?
    I need to make sure this restore procedure works flawlessly while I still have the computer in my hands. If it doesn't, there's no chance I'm going to be able to do a remote reinstall for my non-techie once I am asked to clean up the laptop over the phone a few months from now.
    Thanks in advance
    [Update: while looking for the right place where I could post this I found that other people are reporting the same problem. It's definitely a bug in the distributed recovery software for W7-64, not an isolated problem of my machine. See for example
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=49421&tstart=0 where user kwarc is describing the same symptoms with a Satellite L505.

    I am glad to report some unexpected SUCCESS!
    I left the computer at what it was doing when I wrote the previous
    post. I came back to it an hour later or so (I had stopped counting
    the reboots, though occasionally I'd hear that typical chime from the
    other room, saying it was doing one more cycle) and I noticed
    something slightly different: the white screen with "finishing the
    installation may take several minutes" had a blue blob, not a green
    blob, in the progress bar, and the blob was rectangular rather than
    rounded. Very odd! Something different had happened, like a change of
    theme. And a little while after that, the process really finished and
    I got to the white screen that asks about what language etc etc, like
    when I first turned on the new computer.
    Great!
    All I can conclude from this experience:
    Even a reinstall that works will DEFINITELY involve many reboots that
    seem to be getting nowhere. Apparently, progress is being made, even
    though it looks like the process is stuck in a loop of reboots.
    It would just be nice if it said something like "Before I finish
    restoring, I'm going to have to reboot 26 times, please hang on; now
    doing cycle 8 of 26". (Numbers are made up.) It doesn't, but just
    knowing about it is helpful.
    Perhaps worth redoing the install once more and making a note of how
    long it really takes from beginning to end when it does work.
    I still don't know if the process I described in the first post was
    really stuck because of some other error or whether it would have
    ended eventually. If I wanted to be really sure I could re-restore
    everything on that hard disk once more.
    I have no idea whether wiping all partitions from the disk before
    reinstalling did any good or not: it shouldn't have made a difference
    since, as I said, I noticed that the first thing the restore program
    did was redo all the partitions itself. On the other hand we have
    experimental proof that the restore can work on a HD without any
    partitions.
    Thanks again PauPau---the most useful thing you said, for me, was the
    data point that for you it had worked. That's what made me try again
    and leave the computer on indefinitely through the innumerable
    reboots, just in case.
    I'll repost a definitive answer on how long a successful restore
    process should take once I get round to redoing it on the supplied 320
    GB HD.

  • Iphone stuck in infinite setup loop

    My iphone is stuck in an infinite setup loop. Have reset phone a lot of times and it lets me set up all info. I get home screen for less than 2 seconds and the set up screen pops back up. Randomly the voice over will come on and the tripple tap to enter from kep pad/board comes on or goes off. HELP!

    Hello DebiSuzi,
    Not being able to use your device can certainly be frustrating. From what I can gather, it sounds like you're having issues restarting your device. After reviewing your post, I have located an article that can help in this situation. You may want to consider restoring your device to factory settings. After this is complete, I would recommend restoring your data from any potential backups you may have:
    If you can't update or restore your iPhone, iPad, or iPod touch
    Use recovery mode
    You might need to use recovery mode to restore your device in these cases:
    iTunes doesn't recognize your device or says it's in recovery mode.
    You see the Apple logo onscreen for several minutes with no progress bar.
    You see the Connect to iTunes screen.
    Learn what to do if you see the progress bar onscreen for several minutes.
    To put your device into recovery mode, follow these steps:
    Turn off your device and leave it off.
    Plug in your device's USB cable to a computer with iTunes. 
    Hold down the Home button on your device as you connect the USB cable. Keep holding down the Home button until you see the Connect to iTunes screen.
    When you see this screen, release the Home button. If you don't see this screen, try steps 1 through 3 again. 
    When your device is connected, iTunes will open. You'll see a message saying that iTunes has detected an iPhone, iPad, or iPod touch in recovery mode.
    Use iTunes to restore your device. Restoring in recovery mode will erase your device. If you previously synced with iTunes or iCloud, you might be able to restore from your backup.
    Get more help
    Learn what to do if you don't see your device in iTunes for OS X, or in iTunes for Windows.
    If you put your device into recovery mode by mistake, restart it. Or you can wait 15 minutes and your device will exit recovery mode by itself.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • HT4993 my iphone is stuck in a reboot loop how do i get out

    my iphone is stuck in a eboot loop how do i get it out

    Follow these steps and your iPhone should work fine.
         1. Hold the power and home button simotaniously (at the same time) for 10 seconds.
         2. Wait 5 seconds then reboot.
    If the issue presists, do this.
         1.Connect to iTunes via USB cable.
         2.Hold power and home button for 10 seconds or until screen turns black, let go of the power button, but continue holding the home button for 5 seconds or until the emergency diagnostics screen (iTunes icon with USB cable) pops up.
         3. If done correctly you will see the screen above. Now, wait for iTunes to diagnose the phone, and if nessesary, restore your iPhone.
    I hope this helped you!
    <Edited By Host>

  • [P67a-GD65] [Ivy] Infinite reboot loop after flash

    MSIHQ: Information detected by MSIHQ Tool ver: 1.25g
    MSIHQ: Report generated in Tue 01/01/2013 at 13:31:41.33
    Mainboard:  P67A-GD65 (MS-7681) - CPU i5-3570K
    PCB Version:  2.0
    BIOS Version: V4.2
    BIOS Date:  7/16/2012
    Attempted to upgrade to https://forum-en.msi.com/index.php?topic=164135.0
    Due to the inability to hold any overclocks with any voltage besides auto, and because the Windows MSI control center wouldn't keep settings on startup.
    Installed the forum flash tool on a USB drive and it wasn't bootable.
    Tried with another flash drive and it wasn't bootable.
    Used the on-BIOS tool to flash the BIOS
    Flashed, rebooted, and began reboot looping.
    Cleared CMOS - nope
    Removed battery and cleared CMOS - nope
    Removed all but one stick of RAM - nope
    Is it bricked? If so, how do I get a replacement/repair?
    Edit, was perusing the forums and found this:
    Forum flasher defaults to looking for zip files, if you pick rar from the drop down it should accept the file just fine, if you don't use method 1 you won't get the ME flashed.
    It's lovely that that's documented and pointed out in the flashing tool's post, and it's rather odd that all of the BIOSes are saved in .rar archives if the flasher looks for .zip. I used method 2.

    Quote from: Svet on 02-January-13, 04:35:53
    You should use "Fix My USB key" Tool's option 1st before prepare the stick if you having troubles booting from the USB key.
    I realized that after the fact.
    have you done >>Clear CMOS Guide<< with power cord removed and leave 1 memory stick only in 1st DIMM close to CPU socket?
    I just did that, and it unfortunately continues to loop.
    I guess I'll get it packaged up and into the mail. Thanks for the help guys.
    When I do get it fixed, what BIOS will it come with?

  • Windows vista locked in Shutdown mode loop.

    After FF latest update when I put my Dell Laptop with Windows Vista as the Operating System, it failed to shut down and seems to be locked in the shutdown mode. It will not respond to "Ctrl, Alt, Del), any key stroke and has a full battery. I have left it unplugged and it continues to notify that Windows is shutting down but it has not done so in 12 hours. Your help would be appreciated.
    Thank you

    The problem proved to be simple: we had only one ISAKMP policy (encryption: 3DES, hash: MD5) and it was o.k. with Windows XP. But in Windows Vista MD5 is removed. Though it's possible to get back MD5 by editing registry of operating system, we just added another ISAKMP policy with "Secure Hash Standard" istead of "Message Digest 5" as hash algorithm.
    For more details see: http://blogs.technet.com/rrasblog/archive/2006/11/01/vista-lh-security-changes-for-remote-access-scenarios.aspx

Maybe you are looking for

  • Error in Integration of Defect Module of HP QC with SolMan Ehp 1

    Hi, We are using QC version 10 patch 12 and connected with SolMan Ehp 1 for testing. We are facing a problem in integrating the defect module of QC with Service desk of SolMan. The required settings are done in SPRO -> SAP Solution Manager -> Scenari

  • Error in filter with SQL Expression

    HI Experts, I have a sql query which works fine, but have to_date funtion() in the where clause as below : and oe.ORDERED_DATE BETWEEN to_date('09-APR-2009 23:59:59','DD-MON-YYYY HH24:MI:SS') AND to_date('10-APR-2009 23:59:59','DD-MON-YYYY HH24:MI:SS

  • Material count by Storage BIN wise with WM impelementation

    Hello, Users are counting  the materials storage-bin wise.   The issue is, there is no WM module, ONLY  MM module is implemented.     Whether its possible to design a solution that will allow creation of Physical Inventory documents and performing th

  • How to pass multiselect list values to javascript?...

    Hi, guys... (continuation...) Here is a Q. I have two multiselect lists item on the page. I need to use the values of these items in ODP. The button calls javascript, and javascript envoke ODP. Everything is working fine if i submit the page and then

  • Why is my raw image became brighter on LR4..?

    why is my raw image became brighter on LR4..? it was perfect on the camera lcd but after the importing the raw file to LR4 the image became overexpose... help anyone...?