Windows Vista System download timeout error

Hi,
Every Adobe Reader download i've tried keeps giving me a download timeout error.
I have removed all Adobe programs
Adobe Reader X (10.1.3)
Adobe Air
Acrobat.com
Adobe Reader 9
AcroRead.msi
then i re-started my laptop and tried to re-install Adobe Reader X (10.1.3) but i am still getting the same download timeout error message, where am i going wrong?
could you please help ?
thank you
kas

Try downloading the offline installer from
http://get.adobe.com/reader/enterprise/

Similar Messages

  • ITunes no longer works on my Windows VISTA system.  Get error msg saying C runtime library incorrectly... Error 7, Windows error 1114..

    iTunes no longer works on my Windows VISTA system.  Get error msg saying an application is attempting to access C runtime library incorrectly... Error 7, Windows error 1114.  Same msg, or one that says unable to install, when trying to update or reinstall iTunes.  iTunes worked well up until about a month ago when this error msg starting appearing.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Windows vista system, continuously trying to download a DRM file in Adobe Digital Editions application shows "Error check activation". I have authorized the Fire Wall and still the same.

    windows vista system, continuously trying to download a DRM file in Adobe Digital Editions application shows "Error check activation". I have authorized the Fire Wall and still the same.

    Since Re-activation as suggested by the link above is not working for you, Can you please confirm the following:
    The OperatorURL is reachable. ( you can find the operatorURL from the acsm file by opening it in notepad,etc)
    And Book is still available on the book-store for purchase.
    (If any of first two are not available, you might have to talk to distributor for next action item to get the book. Since you will have record of purchasing the book, (in my opinion) they should provide you the new token for downloading the book)
    And please confirm this that you used the same userID for downloading that you used when you first fulfilled/downloaded the book.
    (If it is the case, then you have to use the correct userID)
    I hope it helps.

  • For the last 3 or 4 versions of iTunes, and continuing in 11.05, the site recognizes that I have a 64 bit OS (Windows Vista) and downloads the 64 bit version of setup.

    For the last 3 or 4 versions of iTunes, and continuing in 11.05, the site recognizes that I have a 64 bit OS (Windows Vista) and downloads the 64 bit version of setup. Setup installs iTunes in the 32 bit application directory (Program Files x86) - it's not all that unusual to run a 32 bit app under a 64 bit OS - BUT whenever I connect any of my iPhones, I get an error message that say I cannot use the iPhone because the 64 bit version of iTunes is not installed.  The message then tells me to de-install iTunes and to install the 64 bit version.
    Like I say, the 64 bit Setup version is selected for me, and it runs error-free, but I seem to have no control or ability to force the installation of a 64 bit iTunes app.  And all the iPhones are inoperative with the 32 bit version I have.  I have another PC, which I have held at an earlier iTunes release. Although it's a notebook, it's identical in every other way (OS & installed utilities and apps) to the desktop that has developed the problem, and my iPhones work fine with it, although iTunes on it is at the earlier release, and I have no intention of upgrading that version until I understand and have corrected the problem.
    Any ideas or suggustions?
    Thanks.

    This iPhone cannot be used because the required software is not installed. Run the the iTunes installer to remove iTunes, then install the 64 bit version of iTunes.
    That usually indicates that your Apple Mobile Device Support has not installed. That's also what is being shown by the diagnostics (the driver is there but the application isn't).
    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • Dynamic ARP inspection rate limit issues with Windows Vista Systems

    Good Day to everybody.
    I had implemented DHCP Snooping & Dynamic ARP inspection feature to mitigate ARP spoofing attacks to one of customer location where we have mix of Windows vista & XP systems. By default DAI feature rate limit ARP packets on un-trusted ports to 15 Packets per second. With this value I was facing some issue to access file shares where port will go in error-disabled state due to ARP broadcast from system was crossing 15 PPS limit of DAI. For the same, I had increased the DAI limit to 64 & after that we had not facing this problem from windows XP systems, but windows vista systems are still giving problem. Also this probem is very random in nature & not all the windows Vista system will face same issue even though they are accessing same file share & are configured with same DAI rate limit.
    That's why I am not able to figure out baseline values for DAI rate limits. I had already search microsoft documentation for limiting this ARP broadcast from Windows Vista system, but no luck.
    Is there any way to find out correct settings for this DAI packet rate limiting in Windows Vista enviorement ?

    Hello bensyseng,
    check out this thread.
    As topmahof said already it could correlate with a wrong Intel driver.
    Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
    Please insert your type, model (not S/N) number and used OS in your posts.
    I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
    TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
     English Community       Deutsche Community       Comunidad en Español

  • TS1717 Trying to download iTunes onto PC installed with windows vista. Download keeps getting to 99% with 1 second remaining and then freezes / does nothing? Any help appreciated.

    Trying to download itunes onto PC installed with windows vista. Download keeps getting to 99% with 1 second remaining and then freezes / does nothing? Any help appreciated.

    I solved the problem! The updates orignally were downloaded to the C: drive of the server. I've since moved them to the E: drive and for some reason the Content folder in IIS didn't change the file path to the new WSUScontent folder.
    The root cause for this was failing to use the UTILITY designed for this very purpose.
    I edited the virtual directory settings in IIS and was able to put the correct path in.
    You still need to use the UTILITY.. to fix all the other stuff you're still missing.
    In the %ProgramFiles%\Update Services\Tools folder...
    WSUSUTIL MOVECONTENT E:\WSUS E:\WSUS\MoveContent.LOG -SKIPCOPY
    This problem was caused by moving the WSUS updates to a different local drive.
    No. This problem was caused by IMPROPERLY moving the WSUS updates to a different local drive.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • When installing Adobe Photoshop CS3 on Windows Vista I get this error "Setup has encountered an erro

    When installing Adobe Photoshop CS3 on Windows Vista I get this error "Setup has encountered an error and cannot continue. Contact Adobe Customer Support for assistance. Internal Error 2739" I have used the cleanup script included in Adobe Photoshop CS3 installer, and have removed all traces of Adobe apps including the beta versions and Acrobat 8 pro, and I still get the same error, how can I install this application? is there any way or do I have to reformat and reinstall windows?

    Hello everyone,
    I was having the same issue:
    "Setup Error. Setup has encountered an error and cannot continue. Contact Adobe Customer Support for assistance. Quit."
    If you receive this error also, press Quit and follow these steps:
    1. Start
    2. Control Panel
    3. Administrative tools (in classical view)
    4. Event Viewer
    5. Application
    You will see something like this:
    Double-Click for error (emphasized by red color). I have an error like this:
    "Error 1327.Invalid Drive: E:\" if you have the same or e.g. Drive F:\ ir whatever letter, you should solve this problem extremely easy - just insert USB-flash into computer (it will launch as E\ or whatever disk) and than run installation again. It will work than.
    Setup doesnt start if disk is offline.

  • Zen Images (Windows Vista - System error: 30)

    I am having problem with making an image of Windows vista dell laptop. I was trying to make image from Zen work disk and USB flash drive. It's giving me an error message System error: 30. Please help to resolve this issue so i take image of new computer.
    I try with /mnt/usb
    mkdir /mnt/usb
    mount /des/sdb1 /mnt/usb
    img
    I like to store this image on Local usb hard disk.
    Thank you

    Thanks for your quick response.
    How can I check for the file system, that is on the USB Device.
    Zenworks imaging was working on USB, for older vostro laptops.
    However, it has now stopped working with the new vostro laptops.
    Please advise.
    Thanks
    =============================
    What file system is on the USB device ?, ideally it needs to be ext2
    Cheers Dave
    Dave Parkes [NSCS]
    Occasionally resident at http://support-forums.novell.com

  • Windows Vista Installation Failed. Error Restart Loop After Install.

    I made it as far as the end of Step 2: Partition for Windows Vista -> Format -> Install -> Restart
    Note: Partition size = 45 GB. Apple USB keyboard and mouse worked fine.
    The install process was stuck in a loop at this point. After restart the screen was black for about 5 minutes. Disc made noise off and on but no screen input. Then it finally restarted. Next screen had error info and a choice to continue. After that a "Install Windows" error msg appeared;
    +"The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer and then restart the installation."+
    Clicking "OK" resulted in the same error msg. along with +"Press any key to boot from disc"+. No success attempting to start up from Windows partition. or disc. Restarted to Mac HD. There is a "Untitled" drive on the Desktop. It contains multiple folders (11 GB). I tried to restart from this drive w/o Windows disc and it returned to the previous error msg.
    Next I tried restarting w/ Option key, inserting Windows disc, clicking on arrow under disc icon and quickly pressing any key. This brought up +"Windows Boot Manager Window"+. The only choice was; +"Windows set up [EMS Enabled]. To specify an advanced option for this choice, press F8. Tools: Windows memory diagnostic.+" None of the key choices (Enter, Tab, Esc) responded. Disc would not eject.
    Booted to Mac HD. Ejected disc w/ mouse. Used Boot Camp to restore partition. After restart screen is black with; +"No bootable device -- insert boot disc and press any key".+ Then I power down/on with Option key. Only Mac HD is displayed. Log into Admin. Mac HD looks fine. Run Disk Utility to verify disk/volume. OK. Also ran TechTool Deluxe. Passed. Open System Preferences, check that Mac HD Startup Disk is highlighted. Restart. OK now.
    What is going on? I was quite confident this would install without any problem since I was using the latest OS X 10.5.6 and Windows Vista Business (early version). Could that be the cause? I had no problem installing it under VMware Fusion 2 (downloaded updates), worked flawlessly. If I can't get this to work then I have to go back to a PC for ACAD. HELP!!
    Can I get Apple Support for this issue (Phone only, or Genius Bar)? I have AppleCare.
    Message was edited by: Sakahara
    Message was edited by: Sakahara

    Your problem sounds somewhat like mine, although not exactly. In my case it seems as if my CD/DVD drive didn't like the hologram on my Windows XP install CD. I solved this by using Disk Utility to make a disk image of the Windows DVD and then burning the disk image onto a new DVD with an opaque "label". That solved that problem.
    A further problem occurred after that. When I got to the screen that told me to hit "Enter" to start the installation process my keyboard was unresponsive. I solved this by buying a cheap Windows keyboard. That solved that problem and I now have Windows XP running just fine.
    I think that you'll find that Apple tech support isn't very responsive to these sort of problems. I don't have Apple Care but was willing to pay my $49 for tech support. I ended up talking to a "Boot Camp specialist". He was polite but told me that it was "a windows problem" and that Apple didn't support Windows. I agree that Apple can't support windows but it seemed like my two problems were "Mac problems". Anyway, after tearing my hair out for 4 days I finally got it done. I have to admit that I'm not happy with apple tech support.

  • I am trying to reinstall iTunes on my PC (Windows Vista) and download stalls at the end and message reads "The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library Core Media.dll"

    I am trying to reinstall iTunes on my PC (Windows Vista) and the download stops just before completion with the following message: "The procedure entry port kCMByteStreamNotification_AvailabileLengthChanged could not be located in the dynamic link library Core Media.dll"  Also "error 127. Any suggestions?

    Okay. Trouble at the "publishing production information" stage also suggests trouble with Apple Application Support.
    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Itunes on windows vista not downloading new purchases

    I recently received an Inspiron E1505, and am running windows Vista Basic. I have Itunes 7, and it works fine except for when I purchase music. Then it receives an error of connection timing out or unable to download the songs. Does anyone know how to fix this?
    I've tried bypassing my router, disabling all firewalls (McAffee, Windows, and Windows Defender), contacted Dell and my ISP, and now I'm at a loss. Please help?

    I am having exactly same problems as have been mentioned with my new machine and I too am running Vista. Has anybody any suggestions or been able to find a solution? I have been able to download some purchases, which initially came up with this same message and then later successfully downloaded. I have another purchase just sitting waiting to be downloaded but now keep getting this 3259 connection timing out error.

  • G60-231wm Windows Vista 32-bit Recovery error

    I need to order a new Recovery CD for the operating system. Your website does not list any CD for Windows Vista 32-bit OS. How can I Restore this notebook? It has no burned backup CDs and the partition for recovery has an error. It tried everything to no avail.

    I looked up your system and it appears to me that you have a vista 64bit system, but the recovery disc's are still not available online. I would try calling tech support at 1-800-474-6836 and ask to order recovery discs. I am fairly confident that you will be able to order then this way. Good Luck
    I work for HP.
    ***Feel free to send me some KUDOS if you think I did a good job***

  • Windows Vista + N95 + Image Store - "Error communi...

    I am trying to store images from my N95 using the Image Store application. This worked beautifully in XP, but after upgrading to Vista, all I get is a dialog box telling me "Error communicating with the phone".
    This happens for both Bluetooth and USB connection, and it doesn't help that I set the Image Store to XP compatability, or run as admin. I really miss the Image Store functionality, it took the fuss out of storing images from the phone completely.
    How can I fix this?
    Details: Nokia N95
    V12.0.013
    19-06-07
    RM-159
    Nokia N95 (03.01)
    Window Vista Business
    PC Sync - 6.84.10.3
    Image Store 6.83.0.0
    Best regards,
    Goran

    There is another cause and cure I think cause I just "fixed" my problem of this kind over many hours of agonising and trying the suggestions above.   Another internet site tells you :
    "This usually happens for the simple reason that Gallery on the S60 device is running and currently holding open one of the files you're trying to backup (and delete). Switch to Gallery on the smartphone, back out of the image or video clip and use 'Exit'. Now try the 'Store images' function again - it should work fine!"
    Unfortunately I couldn't obviously see a photo open in the Gallery. I was trying to store 103 images and I noticed it was stopping at one. I had a look at that one, it was not that important so I deleted it and try again. And it worked! It was as if it was evil, and blocking the software at that point. So it backed up about 70 images and jammed again. Found another image which I remember taking with the camera about a week ago and deleted that one, again not too important. Tried again and it went all the way backing up to a photo I took yesterday.
    So that's it, something is left half open when the photo is saved and it screws up image store when it reaches it. Actually, I think that last image which I took I screwed up by closing the camera cover before it had finished doing its thing. I think now the moral of the story is that the digital camera in my N82 and it's softwared needs some TLC, it is not that robust, you need to give it a few seconds to do it's thing or it half saves these corrupted images. I could view the stuffed up image perfectly on the camera and Im sure there would be a better technical way of properly closing it in symbian rather than deleting it but yay it is solved!!

  • Windows Vista "Disk is locked" Error

    ITunes reports "The folder iTunes is on a locked disk" or "You do not have write permissions for this folder" in Windows Vista.
    I know that there is a suggested fix for XP using TweakUI, but I can't find anything to help in Vista.
    I've tried removing and reinstalling, but that didn't help.
    I'm using a clean install of Windows Vista Ultimate.
    My iTunes music files and library were previously working in Vista before the computer was reformatted (Adobe CS3 upgraders will know why I had to that).
    Any assistance will be appreciated.

    Which error are you getting? Are you getting the "locked disk" or the "cannot be found or created"?

  • Windows Vista ODBC install failure error 126

    I'm attempting to set up ODBC connections using Client 10.2.0.3 in Windows Vista 32-bit as administrator, following instructions in MetaLink Note 415166.1. I'm not successful and get error code 126. I've found similar complaints on web searches, but cannot resolve this. Can someone help?
    A pop-up box reads:
    "Errors found:
    Could not load the setup or translator library."
    In DNS data source list, "Oracle in Oracle10g_Home" shows SQORA32.dll dated 11/16/2006.
    In regedit, HKLM\software\ODBC\ODBCINST.INI\Oracle in Oracle10g_Home lists the driver as C:\oracle\10g\SQORA32.dll. I checked, and it's there. Setup is C:\oracle\10g\SQORA32s.dll. It's also there.
    The service names exist in net manager, and connection tests work fine. Thanks in advance for any offers of help.

    Try to copy in the instantclient's directory mfc71.dll and msvcr71.dll.
    I'm not sure if both are required, but it worked for me.I tried your suggestion but got the same result. This time I can provide more details on the message. The dialog box is titled SQORAS32.DLL and the message is "An unsupported operation was attempted."
    I had to click the dialog 3 times, then the Oracle ODBC Driver Configuration dialog opened on the workarounds tab. The drop-down box for the TNS service name works. Clicking the tabs for Application, Oracle, or SQL Server Migration all pop up the same SQORA32.DLL error dialog with the vague message.
    Thanks, anyway.

Maybe you are looking for