Windows vista tells me iTunes has stopped working when I try to sync iPod
I recently downloaded the newest version of iTunes (8.0.2.20), thanks to its incessantly asking me to. Since I downloaded, every time I attempt to sync to my iPod classic, Windows tells me iTunes has stopped working and forces me to close the program. Any help would be greatly appreciated.
I'm not sure if it's taboo on these boards or not, but this is just a friendly "bump" to see if it might catch the eye of someone who has discovered a fix for this behavior.
I did discover a couple of suggestions in my research, neither of which proved helpful to me. The first was to disable the sync function for contacts with Outlook (no joy). The second was to delete the Sync Services folder (which I "temporarily" deleted, but still no joy).
I have found resources that purport to provide sync control over your iPod without using iTunes. They look to be about a $40 gamble, but I may have to try that route (but would really hope that one of the smart people here would have ideas beyond Apple's "elementary "R's"").
Bob
Similar Messages
-
I get a message that itunes has stopped working when I try to sync photos
I get a message that itunes has stopped working when I try to sync photos. Error message says "APPCRASH ..."
Can anyone help? Thanks.I found the file but when I added it to the list for the Data Execution Program to ignore , I received a message that the Program.x86/itunes file must have the DEP on in order to run. Anyone else having this problem ?
-
Why does Windows Vista tell me Firefox has stopped running when I close Firefox ?
Ver 20.0.1 no problem with Windows 7.
Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you. -
I have received window error message "iTunes has stopped working" everytime I plug my classic ipod to the laptop which running window 7. iTunes was working fine with the same ipod, but starts to receive the error msg. after the second plug to update the music files this morning. All the music files were removed from the ipod. Any idea what might cause the problem and how to get it fixed? thanks!
Thanks! i finished to run Check your iPod with Diagnostics Mode. here is results:
Retract:15
Reallocs: 0
Pending Sectors:0
Poweron Hours:556
Start/Stop:5071
Right now, i am runing Check iPod hard-drive for errors and will let you know if it gets ipod fixed or not -
Message: itunes has stopped working when I connect ipod touch-windows 7
message: "itunes has stopped working" when I connect ipod touch-using windows 7
Make sure to check your internet settings or the settings on your wi-fi server (if accessible). You may also want to make sure that your not in a place where wi-fi is obtructed.(concrete walls other machines, etc.)
-
ITunes has stopped working when I click "Get Info"
Anyone can help me please..?
My iTunes has *stopped working* when I right click on any song click "*Get Info*". It just stop and crash. I'm on Vista 32bit. Thanks before...Well it's working fine again.........................................I don't get it - -
-
Why does my iTunes stop working when i try to sync music to my iPhone?
Why does my iTunes stop working when I try to sync music to my iPhone?
Morning Bandg72,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Best of luck,
Mario -
Excel has stopped working when I try to launch Excel 2013 Powerpivot
Redirected from the Win 7 forum: (http://answers.microsoft.com/en-us/office/forum/office_2013_release-excel/excel-has-stopped-working-when-i-try-to-launch/01460690-abab-495f-ab5f-904f72f88668)
My system is a Windows 7 machine, 64 bit
I previously had Excel 2010 32bit with 32 both Powerpivot installed. However I am currently evaluating 64 bit Excel 2013 with Powerpivot for my company so I uninstalled Excel 2010 and installed an evaluation copy of Excel 2013 64 bit.
However whenever I launch Excel, enable Powerpivot, then click any of the Powerpivot buttons it gives me an error saying "Excel has stopped working".
I took a look in the Windows events logs and found:
Faulting application name: EXCEL.EXE, version: 15.0.4420.1017, time stamp: 0x506741b5
Faulting module name: mscorwks.dll, version: 2.0.50727.5477, time stamp: 0x5265c8ee
Exception code: 0xc0000005
Fault offset: 0x00000000002ba203
Faulting process id: 0x3e8c
Faulting application start time: 0x01cf52a7644eda9d
Faulting application path: C:\Program Files\Microsoft Office\Office15\EXCEL.EXE
Faulting module path: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\mscorwks.dll
Report Id: afa4f824-be9a-11e3-94ac-415645000030
I have tried uninstalling and re-installing as well as doing a Repair on my .net framework, which is the latest version.You can go to check the dll file, what's size of this dll file?
If the file size is 0 byte, you can check the link below:
http://forums.steampowered.com/forums/showthread.php?t=2735528
Also you can go to check the disabled items (File->Options->Add-ins->Disabled items->Go) to see if any dll file was disabled.
In addition, Isn't the latest version of .NET Framework supposed to be 4.0?(Not quite familiar with this)
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee
the accuracy of this information.
Wind Zhang
TechNet Community Support -
I get an error message "Adobe Reader has stopped working" when i try to use Firefox
I get an error message "Adobe Reader has stopped working" when i try to use Firefox
I have also retarted twice...
-
ITunes has stopped Working when using Ipod shuffle 3gen on Windows Vista HB
Itunes keeps shutting down when I insert my Ipod shuffle into the usb connection of my latop. I am using a Windows Vista Home Basic for an OS.
Not sure if this is a Vista, Apple issue, or something else...
I have contacted apple about this and uninstaled/reinstalled Itunes. Yet after all this, I get the same error message. The message reads:
"iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
As far as I know Vista should be compatible with iTunes and it is until I actually try to use my shuffle (newest model). Its weird because my shuffle works fine on a second computer that has Windows XP for an OS...
Does anyone have a solution to this??
Thanks in advance!i have the same issue... but i found a workaround.. i tried 3 diff OS's . didnt change the problem. To Add apps or music to ur Ipod... simply DISCONNECT the Ipod from the PC then add files/folders to library. Then connect the ipod back to PC and sync. it has no problem adding the files that way (at least in my case) I hope this helps... Good Luck =)
-
"itunes has stopped working" when closing itunes Windows Vista
Since November 2007, when I close itunes, I get Windows Vista error "itunes has stopped working" This got worse when it corrupted the itunes library itl file. I deinstalled QT and itunes version 7.5, and went back to version 7.4.3.1 - but the problem persists.
I believe this problem started with the install of version 7.5
Below is the crash information from Vista:
Problem signature:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 7.4.3.1
Application Timestamp: 46f9e539
Fault Module Name: StackHash_0afa
Fault Module Version: 6.0.6000.16386
Fault Module Timestamp: 4549bdc9
Exception Code: c0000374
Exception Offset: 000af1c9
OS Version: 6.0.6000.2.0.0.256.6
Locale ID: 1033
Additional Information 1: 0afa
Additional Information 2: 2684fb59c11da8d751eea2c524906956
Additional Information 3: 7e99
Additional Information 4: 6fb64e982f7c00dccfe5a07cd555cadbI am running Windows 8.1 and iTunes 11.1.3.8. I found a simple solution by browsing through the support communities. Here it is: Copy QTMovieWin.dll from: C:\Program Files (x86)\Common Files\Apple\Apple Application Support to: C:\Program Files (x86)\iTunes
This worked for me. Good luck. -
After downloading the newest version, 10.6.1, whenever I open itunes I almost immediately get a "itunes has stopped working" error messsage, in which the only option is to hit the "close the program" button. Simply closing the error message closes the program as well. I am operated under windows XP with the latest updates (or so the updater tells me). It seems like its getting stuck trying to send me a new user agreement because dont you have to agree to one for every new update? It just can't seem to get past that point. I tried opening it up in safe mode but that didnt work either. Any help would be greatly appeciated.
Looks like itunes was still trying to communicate with my iphone and got confused when it couldnt find it. Found this in another post and it worked great.
Solution:
Make sure you are not connected to the internet and then open itunes. Sync your phone and then enable the internet again. Then stay connected to the internet and close your itunes and reopen it. Bam problem solved.
By WaKaDo -
64 Bit Vista Error Message: Itunes has stopped Working
I installed Itunes on my 64 bit Vista OS and it was working fine for about 3 weeks. Now I get an error message when I try to start Itunes now: "Itunes has stopped working"
I searched for a solution on here but it looks like Itunes doesn't support the 64 bit OS I have installed on my computer. I really hope they fix this. I've had my Ipod and Itunes for 2 years now. It's been a pleasure to own and I've bought many Songs from Itunes store. But, if I can't get it to work on my computer I may have to try to sell it for something that will work.
Thanks, HairyHello, Sofa_King_Gary.
Thank you for visiting Apple Support Communities.
I see that you are experiencing issues with iTunes closing unexpectedly and you have attempted some troubleshooting steps already. There are just a couple more steps that I could recommend in the article below.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Cheers,
Jason H. -
Itunes has stopped working when turning on genius for windows 7
Has anyone had itunes has stopped working while trying to turn on genuis for windows 7. Also i have a new toshiba satellite c655d-s5200 laptop. Thanks
Make sure to check your internet settings or the settings on your wi-fi server (if accessible). You may also want to make sure that your not in a place where wi-fi is obtructed.(concrete walls other machines, etc.)
-
itunes was working fine prior to installing 11.1.3.8 on windows 8.1 now when trying to access itunes store get error message itunes has stopped working.
i have the same problem no radio stations at all bit shabby hate technolgy now adays
Maybe you are looking for
-
How to change P.O. duplication message type from warning to error for Order
Hi Experts, I have a requirment to change P.O. duplication message type from warning to error for Order only not OrderTemplate. I can easily change message type in BAdI ISA_BASKET_MSGS, but I can't find the parameter to know if it's Order or OrderTe
-
My iPad mini says to connect to iTunes, and I try to restore it, but after its done extracting a message comes up saying that device is not found, is there anyway i can fix this? I don't care if i don't get my stuff back, i just want my iPad restored
-
Importing from a different character set
Oracle 8.1.7 / Windows NT I'm trying to import a dump file which was created with character set WE8ISO8859P9. My database uses character set UTF8. Some of the records can't be inserted because of error "ORA-1401: Value too large for column". Is this
-
How to combine multiple Unmanaged Solution to one single Managed solution
Hi, How to combine multiple Unmanaged Solution to one single Managed solution.? There were some other third party developer have kept things lik ein UAT there are 2 release solution and both are Managed Solution. And in Production the changes are onl
-
ACCOUNTING IDOCUMENT CREATED FROM XI IN R/3 NOT CREATING GENERAL LEDGER
Hi, When accounting document created through the message type ACC_DOCUMENT we are using basic type ACC_DOCUMENT01 for posting the document in inbound process accounting document gets created in r/3 side but without updating the New General ledger (FA