Windows Vista to Windows 7 Upgrade problems

I have ASUS desktop. I upgraded Windows Vista to Windows 7. When i start my pc I get a message Can't Open ASIosys!!(2). The first day I installed Windows 7 everything ran pretty good except for getting this message. I then did all the Microsoft Updates for Windows 7. After that my card readers are not reading my SD cards. I put a card in and the pc makes a noise but it's not reading the card and when I check under my computer it doesn't show the cards in the slots. I plugged in an external disk reader to see if it would recognize that but same problem.
I have a driver update program. I've scanned my pc with it but it says all drivers are installed.
Can anyone tell me what's going on?

Hi,
You find your answers at this link.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Similar Messages

Adobe Creative Suite 5 / Upgrade System Windows Vista to Windows 7

Dear customer service,
I am a customer of Adobe as I bought two years ago the Adobe Creative Suite 5.
My system is still Windows Vista. Now I wanna buy the Microsoft Home Office 2013 and now I have to upgrade from
Windows Vista to Windows 7.
My question is if there will be any problem with the Adobe Creative Suite 5? Or can I only put in the upgrade CD,
leave the Creative Suite on my pc and have nothing else to do than just installing?
Thank you for your reply.
With best regards,
Nicole

Correct. You only need to run the CS5 installer and have to provide the pertinent serial numbers in the process. Just make sure you run Help --> Deactivate bevor nuking your Vista install and reformatting your drive. If there are issues during the install, ask in the Download, Install & Setup forum.
Mylenium

I cannot Upgrade from Windows Vista to Windows 7 using Windows Anytime Upgrade

A little while ago I bought an activation and serial key so I could upgrade my Windows Vista to Windows 7
My PC is FULLY compatible and I checked 3 times with Windows 7 Upgrade Advisor ,
I launched Windows Anytime Upgrade and there was no option to upgrade only to go to the website and comapre different versions of Vista
I was a bit fustrated and I have been looking for an answer all afternoon
If someone could help me that would be amazing
System Details
HP Pavillion Slimline
Windows Vista ( 32- Bit )
Dual Core Proccessor
2.5Ghz

What is needed to upgade to Windows 7 is an install disk. You can borrow one or download the one needed, depending on the key purchased. Windows Anytime Upgrade will only upgrade in the product line that is installed. Which version of Windows 7 did you purchase? And do you need/what 32bit or 64bit?
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Since upgrading from Windows Vista to Windows 7 both Internet Explorer and Firefox will not recognize the numbers keys of my keyboard. I get numbers in Word and every other situation, just not in the internet programs.

Since upgrading from Windows Vista to Windows 7 both Internet Explorer and Firefox will not recognize the numbers keys of my keyboard. I get numbers in Word and every other situation, just not in the internet programs. I have tried uninstalling Firefox and reinstalling with no results.

If there are problems with importing the IE Favorites in Firefox then export the favorites in IE to an HTML file and import that file in the Firefox Bookmarks Manager.
If you do not have the menu bar in IE then right-click the toolbar at the top to enable the Menu Bar.
*Export the favorites in IE to an HTML file (bookmarks.html):<br>File > Import and Export
*Import the HTML file in Firefox:<br>Bookmarks > Show All Bookmarks > Import & Backup > Import Bookmarks from HTML
See "Import from another browser" and "Import from file":
*http://kb.mozillazine.org/Import_bookmarks

Recently upgraded laptop from Windows Vista 2 Windows 7. I had 2 delete itunes,then download again.Music etc purchased over 2 years is in library,soon as I try to play,message saying it can't be located! Any Help?

Recently upgraded laptop from Windows Vista 2 Windows 7. I had 2 delete itunes,then download again.Music etc purchased over 2 years is in library,soon as I try to play,message saying it can't be located! Any Help?

The syncing of music is one way, computer to phone. See this helpful document from a fellow user. Credit goes to the author.
https://discussions.apple.com/docs/DOC-3141

Upgrading from windows vista to windows 7

I am upgrading from windows vista to windows 7. The upgrade I am using is going to delete all of the information I currently have on my hard drive.
I have itunes set up with all of the correct artist/album/track/cover image information for my files. I also have consolidated all of these tracks to an external hard drive - no mp3s in itunes are stored on my local hard drive. I consolidated these tracks after I edited all of the artist/album/track/cover image information.
My questions is this. Once I reinstall itunes on windows 7, when I import these tracks from the external hard drive - are the edits to the files (artist/album/track/cover image information) going to be shown in itunes like they were prior to the windows upgrade? I have a large number of tracks that I have invested a huge amount of time into and I really don't have the time or patience to duplicate the effort.
Does anyone have any thoughts on this?
Thanks in advance for the help.

Duplicate post. Please see your other post for suggestions.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Since I upgraded Windows Vista to Windows 7 iTunes only works in Windows 7 "Safe Mode".

Since I upgraded Windows Vista to Windows 7 iTunes only works in Windows 7 "Safe Mode". it will not run in the normal mode. (It ran properly in Vista) I spent several hours with the Microsoft Technician going through the "1717 suggestions, but to no avail. On my own, I tried iTunes in Windows 7 "Safe Mode" and was successful! It ran like a charm. Unfortunately, I can't run iTunes properly in "Safe Mode" I have not tried moving one set of the files yet. But if iTunes works in Safe Mode, do I need to relocate anything or do I need to find what is causing the conflict between Windows 7 and iTunes?

Which Satellite A205?
Which Windows 7 (64-bit)? What about the other laptop?
Which printer model, version, and so forth?
-Jerry

I have Windows Vista and cant upgrade right now to windows 7 so how can I get a later version of Photoshop like CS6?

I have Windows Vista and cant upgrade right now to windows 7 so how can I get a later version of Photoshop like CS6? I cant find a donwload link anywhere. Please help!

You download cs6 trials from here:
Download CS6 products

I recently upgraded my computer from windows vista to windows 7 ultimate and now i have to delete all the data in my iphone?

i have an iphone 3gs. i recently uprgaded my computer which ment it went from windows vista to windows 7 ultimate.I want to add new music from my computer to my iphone but it says i have to restore it and loose my itunes content. If i do that will i loose everything including texts and contacts? Help ! im so confused because im using the same computer as the first time!

The iPhone "thinks" it's a new iTunes libarary because your computer has a new operating system. As long as all your music and other media is on your computer, you will be fine. The iPhone will be erased because it "thinks" it's a new iTunes library, and the "new library" (which is actually your unchanged data) will be put back on.

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193).

Unable to install iTunes after converting from Windows Vista to Windows 7. Am told installation was successful, then "iTunes was not installed correctly", followed by "Error 7 (Windows error 193). I have my iPod plugged into my computer via USB port. What am I doing wrong?

i have the only account on my laptop so have checked and am the account administrator
i run windows 7 home premium
I have the same problem and
have followed the link uninstalling in the correct order,
then restarted as per instructions,
went to Apple to download itunes,
hit download now,
Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
did not get a save instead of run prompt
Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
i can only click run as administrator from right clicking the shortcut on my desktop screen
If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
sick of doing this
at least 7 or 8 times i have re installed itunes to no avail
troubleshooting no better
please help. pulling my hair out at this stage
it was working fine until 2 days ago when i opened itunes it offered to update to 12.1
not working since i clicked yes
also i have gone to restore previous point and ffs there are no restore points before my multiple reinstalls
really dont want to have to restore factory settings

Installing Oracle 10g on Windows VISTA or Windows 7

Hey,
I am planning to purchase a laptop and i am concerned about installing Oracle 10g .
So which of the Following OS is compatible?
1) Windows VISTA
2) Windows 7
Many Thanks!!
Cheers
Ramkannan.A
Singapore

I found this solution in http://msutic.blogspot.com/2009/08/how-to-instal-oracle-client-11g-on.html
It work for me. I´ve installed a Oracle 10.2.0.4 (vista e w2k8 x64) in a Windows 7 64 bits.
Thanks to Marko Sutic !
========================================================
To workaround this problem I've decided to edit refhost.xml file adding entry for Windows 7.
* in production there are 2 files refhost.xml. I´ve edited both.
Location of this file on my system:
.\stage\prereq\db\refhost.xml
.\stage\prereq\db_prereqs\db\refhost.xml
This is excerpt from newly edited refhost.xml file:
<CERTIFIED_SYSTEMS>

<OPERATING_SYSTEM>
<VERSION VALUE="6.1"/>
</OPERATING_SYSTEM>
</CERTIFIED_SYSTEMS>
New lines are added at the end of this excerpt after . Notice version value=6.1.
In addiction to Marko Sutic tip, I´ve edited too the file ./install/oraparam.ini adding the new value (6.1) to the message:
[Certified Versions]
#You can customise error message shown for failure, provide value for CERTIFIED_VERSION_FAILURE_MESSAGE
Windows=5.0,5.1,5.2,6.0,6.1
I´ve finished now the installation, and all sounds good.
good luck

Error in Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Hello Everyone,
I am a regular user of I-tunes but recently i dont know why but I got some error in Launching I-tunes. So as recomonded by "Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7" section. I started removing the products. But after removing Quick time, I tried to remove Apple Software Update but while uninstalling it gave error that "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." and the uninstall rollbacks.
Please send me a feasible solution to this problem.
Thank You.

Uninstalling the iCloud control panel should allow you to do that folder deletion.

Adobe Photoshop CS3 from Windows Vista to Windows 8 Product Key Invalid

Hi,
I switched my OS from Windows Vista to Windows 8.1 (Clean installation). On Windows Vista, I was running a trial version and tried my product key but it didnt work. On Windows 8.1 also, the product key didn't work. Now I can't check my version because I can't get past the product key screen. Please advice.

Photoshop Elements is under $100 Photoshop Elements Forum http://forums.adobe.com/community/photoshop_elements
As far as I know, anything else is via the Cloud, so you pay monthly rent as long as you want to use the program
Grin... the 'other John' typed faster!

TS1717 iTunes will not start on my PC, I have been through all the suggested "iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues" to no avail. Please help

I am trying to get iTunes up and running again on my PC. I have followed the "iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues" I have uninstalled, re installed, made a new user account gone through the system - wide fixes and still no joy. There are 5 Ipod devices in the house and we deperatly need to get this fixed.
Any help would be greatly appreciated
Robert

Refer to following articles to remove SC file(s):
Win 7/Vista http://support.apple.com/kb/TS2363
WinXP http://support.apple.com/kb/TS1776
Then proceed to repair your Quicktime:
Control Panel >
Win7/Vista - Programs n Features.
WinXP - Add n Remove Programs
Hightlight QUICKTIME and click CHANGE then REPAIR.

HT2305 Since updating my laptop from Windows Vista to Windows 7, my Ipod Shuffle, 3rd generation does not recognize last 3 playlist names; it calls them out as "playlist 3, playlist 4 -- even though in the panel the names are showing just fine. The music

I have recently updated my laptop from Windows Vista to Windows 7. I have just added three new playlists to my Ipod Shuffle, 3rd generation. On the panel in ITunes in view on the computer, all looks fine and music plays. However, after syncing a million times, when clicking to "hear" the playlists, the voice will call out all the old playlists just fine - except for the 3 new ones I've added; it calls them out as "playlist 3, playlist 8, or "purchased". All software for the ITunes has been updated as of the moment. Why would switching from Vista to Windows 7 cause this frustrating issue? All help appreciated.

From page 23 of your iPod's User Guide: http://manuals.info.apple.com/en_US/iPod_shuffle_3rdGen_UG.pdf
If VoiceOver is disabled in iTunes, you hear an abbreviated menu of playlists in numbered order, but not by name (for example, “Playlist 1, Playlist 2,” and so on).
So you'll want to make sure VoiceOver is enabled to correct this.
B-rock

Windows Vista to Windows 7 Upgrade problems

Similar Messages

Maybe you are looking for