Windows Vista Ultimate on Dell XPS Notebook: Why do I need Boot  Camp?

I use Windows Vista Ultimate on my Dell XPS Notebook, and application software includes iTunes and Apple Store. Is this why I received a message to download "Boot Camp"? Why do I need Boot Camp?

Sounds really messed up to me. Bonjour? maybe.
Apple AppStore? I think everyone has the right to their own appstore but I thought only an Apple deivce (mac, iphone, ipad, etc)
Apple doesn't support or license use of Mac OS on other hardware, which they call "hackintoshes."
Check the iTunes for Windows forums and support pages.
iTunes for Windows
Apple Support iTunes
Apple Support Site Map
App Store Boot Camp hanging

Similar Messages

  • Successfully Synchronizing My Palm TX to My New Hewlett Packard Pavilion dv6663 Notebook (Windows Vista Ultimate)

    My Name is Steve, I am a psychotherapist, not a computer expert.
    I got my Palm TX to work (synchronize) after severals days of failed attempts.
    I just purchased an Hewlett Packard Pavilion Notebook a few days ago (dv6663us).  I wanted my palm pilot to synchronize with it but could not get past the 32 bit technology difference of the USB port and the 64 bit technology of Window Vista Ultimate.
    I downloaded the new Palm Desktop Beta software.  I went to the computer store and purchased a Bluetooth wireless adapter for $43.00.  Hewlett Packard makes one that looks like a USB high speed flashdrive, it is about 1 inch long and you just plug it into the USB port (HP bt450).  I plugged it in, I did not have to load software, it was automatically detected and installed.
    I went to the Control Panel; Network and Internet; Network and Sharing Center.  I clicked on the Network and Sharing Discovery button.  Then, I went to the; See Also Bluetooth Devices.  I had to make sure the palm pilot was set to detect other networks.  I had to make sure the computer was set to allow itself to be detected.  I told the computer to search for a bluetooth device.  I promted me to enter a password.  I entered one.  Automatically, the palm told me to enter the same bluetooth password.  I  also went to the hotsync icon on my Palm TX.  At the top of the page, I selected local.  I defined a bluetooth connection to my computer named STEVERIOS-PC.
    When I went to synchronize.  It worked.  I feel so clever.  It took about ten minutes for the first synchronization.  After that, the average synchronization duration was just about one minute.  I was so proud and relieved!
    For me, bluetooth makes more sense than WIFI for synchronization.  Here is why.  I keep my WIFI at home, take my laptop to work and I need to sychronize in a portable way.  The little bluetooth plug in made the most sense.  The guy at the computer store discussed his experience with synchronizing a device using WIFI and decided it was not worth the hassle.   The bluetooth was better for a mobile device and a mobile computer.
    Steve Rios (a.k.a. River Fiasco)
    Post relates to: Palm TX

    Very helpful experience - thank you for sharing.
    This is a good approach for managing HotSync in a 64-bit era.

  • My HP Photosmart 385 printer won't work with my operating system - Windows Vista Ultimate. Why not?

    Is there a driver that I can dowload so my HP Photosmart 385 printer will work with my Windows Vista Ultimate operating system?

    Hey Alyssa426,
    Welcome to the HP Forums!
    Since the installation disk does not support Windows 8.1, I would suggest trying to download, and install the drivers directly from the HP Support website. I have included a link to the 'HP Deskjet F4200/F4224 All-in-One Printer series Full Feature Software and Driver'. Once the software is downloaded, open the software, and follow through the on screen instructions for installation.
    Please let me know the outcome of installing the software.
    Thank you.
    I worked on behalf of HP

  • Windows Vista Ultimate doesn't install on Satellite M40

    Windows Vista Ultimate doesn't install on this notebook. Vista hangs after installation and doesn't boot up. Does anybody know what the problem is?

    Hello
    As far as I know older units are not Vista supported. I believe it is not necessary to say why. Satellite M40 is older notebook model and definitely not Vista supported. Many newer WXP preinstalled notebooks are Vista supported but Toshiba has for each model designed new BIOS version and before installing Vista the BIOS update must be done at first.
    I can imagine that new BIOS is needed for M40 too but as I said before this machine is not Vista supported. I am very interested if someone will report more about Vista on Satellite M40.

  • No Bonjour printers available on Windows Vista Ultimate

    Hello,
    This is my first go around with a Mac. I'm attempting print wirelessly from my MacBook Pro (OS X 10.5.7) to a HP Photosmart C4680 printer that is on a wireless network through a Dell desktop PC that is running Windows Vista Ultimate.
    I've installed Bonjour for Windows on the PC, the printer is shared, but when I use the Bonjour application it states that no Bonjour printers are available. Why is this? How do I change this?
    I've also attempted to complete print sharing from the following guidance, but I'm running into a roadblock trying to find the printer on the network.
    http://macs.about.com/od/macwindows/ss/printsharevista.htm
    Thanks in advance!

    I have the same problem. I have a printer connected to an XP machine through USB and also a printer connected to a Vista machine through USB. I have a Mac wirelessly connected on my LAN. Even though all three computers are set up for file sharing and printer sharing, the Mac cannot see either of the Windows machines nor their respective printers. Apple has not been able to solve this seemingly simple problem. Hey, come on Apple and Microsoft, why can't you two get along??

  • I have been trying to install Itunes for 3 days to my computer.  MY eyes burn and I want to smash this computer at this point!!!! HELP ME!!! I receive this message when I run the diagnostic on my iphone Microsoft Windows Vista Ultimate Edition (Build 6000

    I have been trying to install Itunes for 3 days to my computer.  MY eyes burn and I want to smash this computer at this point!!!! HELP ME!!! I receive this message when I run the diagnostic on my iphone
    Microsoft Windows Vista Ultimate Edition (Build 6000)
    Dell Inc. Studio 1535
    iTunes 10.6.1.7
    QuickTime not available
    FairPlay 1.14.37
    Apple Application Support 2.1.7
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device Driver 1.57.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 0020AEDC02A7C4B8
    Current user is an administrator.
    The current local date and time is 2012-04-17 17:05:40.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
    Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:          {92497F93-8A79-419C-AA27-50CD2F263F77}
    Description:          Microsoft Virtual WiFi Miniport Adapter
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Wed Dec 31 19:00:00 1969
    Lease Expires:          Wed Dec 31 19:00:00 1969
    DNS Servers:
    Adapter Name:          {6FECCC1D-04CF-4A3F-92B6-DC6E68D12BE5}
    Description:          Dell Wireless 1397 WLAN Mini-Card
    IP Address:          192.168.0.118
    Subnet Mask:          255.255.255.0
    Default Gateway:          192.168.0.1
    DHCP Enabled:          Yes
    DHCP Server:          192.168.0.1
    Lease Obtained:          Tue Apr 17 16:59:28 2012
    Lease Expires:          Wed Apr 18 16:59:28 2012
    DNS Servers:          192.168.20.254
                        192.168.30.217
    Adapter Name:          {3323A300-E864-46C3-A6B6-F0B90AFF4AFE}
    Description:          Broadcom NetLink (TM) Gigabit Ethernet
    IP Address:          0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:          0.0.0.0
    DHCP Enabled:          Yes
    DHCP Server:
    Lease Obtained:          Wed Dec 31 19:00:00 1969
    Lease Expires:          Wed Dec 31 19:00:00 1969
    DNS Servers:
    Active Connection:          LAN Connection
    Connected:          Yes
    Online:                    Yes
    Using Modem:          No
    Using LAN:          Yes
    Using Proxy:          No
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was unsuccessful.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2012-04-17 17:04:26.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.0.1),
    E: Optiarc DVD+-RW AD-7640S, Rev HD14
    Drive is empty.
    **** Device Connectivity Tests ****
    iPodService 10.6.1.7 is currently running.
    iTunesHelper 10.6.1.7 is currently running.
    Apple Mobile Device Service not found.
    Universal Serial Bus Controllers:
    Intel(R) ICH8 Family USB Universal Host Controller - 2830.  Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2831.  Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2832.  Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2834.  Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2835.  Device is working properly.
    Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836.  Device is working properly.
    Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A.  Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    Ricoh 1394 OHCI Compliant Host Controller.  Device is working properly.
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    This should get your itunes store connection working.
    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Installing iTunes with Windows Vista Ultimate

    I have tried to install iTunes most recent version and others earlier with on my HP Pavillion and I keep getting a message that says I will not be able to import or burn CDs because iTunes did not install correctly. I have the *Windows Vista Ultimate* operating system. Any reason why this is happening?

    Hi Innonut;
    You are asking your iTune question on the Leopard forum. If you would report in the Windows iTunes Forum, you might get more response there.
    Allan

  • Windows Vista Ultimate and Oh Crap!

    Hello All,
    This post is a bit of a question and a bit of advice. I am a System's Analyst / Network Engineer. I have a lot of experience with computers, Windows, and Mac OS. Eight days ago I started working with a client on a brand new PC with ALL the bells and whistles. The PC is an HP Pavilion running Windows Vista Ultimate, RAID 1 (Mirror), Removable Media Drive, Great Sound via X-Fi, Great Video via Nvidia PCI-X, and SATA (Obviously since it's running a RAID array).
    I got everything setup and running great and as the last step installed iTunes and Quicktime. My client has a few thousand songs, a ton of TV shows, and a whole mess of movies ALL purchased thru iTunes store. Nothing is pirated, stolen, or illegal on this computer. Now, here's where it gets good.
    I did the import in a few stages to make the data transfer a little faster. I did music, then TV, then movies. I tested a song and it worked great. I went to play a TV show and the computer slowed to a halt. I let it go like this until activity started on the machine again. It took about 5 minutes and then iTunes crashed. A second later the computer blue-screened and rebooted.
    As soon as the reboot occured the RAID array came up in a failed state. I had to rebuild the array and get back into Windows. I tried again with the TV show, had the same result, tried again with a movie, and again had the same result. I called HP and they told me to fresh install the OS so I did. Again, same result.
    This has been going on now for a few days with several different tests and several array rebuilds and OS installs. I would have had HP replace the computer or the motherboard but NOTHING else on the entire PC was causing this problem and diagnostics showed no hardware issues. There is/was no reason to suspect faulty hardware or software other than iTunes and/or Quicktime.
    Today I ran the final tests and a fresh rebuild. I found some documentation stating that iTunes had some compatibility issues with Vista and decided to try some other videos that I could run in Media Center. They worked flawlessly. I'm left thinking that these problems are specifically iTunes / Quicktime and will move forward accordingly. Apple has stated that they are working with Microsoft to develop a new version of iTunes that is fully compatible with Vista and I have chosen to wait until that version comes out before installing it again.
    My question is if any of you have experienced issues like this? If you have, do you have any advice or things you did to make it work? Please comment here as I will be watching this post to see your responses.
    My advice is to be very cautious when installing iTunes in Vista, especially with this sort of configuration. I've seen iTunes work fine in Vista before but this is the first time I've worked with a configuration like this. Please be aware of the potential problems. As I've stated earlier, everything else is working perfectly.
    Thanks for your time and sorry for the long post. Have a great day!
    HP PavilionCTO D4790Y   Other OS   Windows Vista Ultimate, 4 gigs of RAM, 256 Meg GeForce 7500LE PCI-X, RAID 1 SATA with 250 gigs

    Thank you for the great responses, guys! This is exactly the kind of feedback I was hoping to get.
    Rain-Man, your post is EXACTLY what I was hoping for. This computer is also running WD drives. I had a feeling that WD might have been some of the issue but it only happened on the SATA RAID config. The computer I set up right behind this PC (on another desk) is EXACTLY the same but does not have a RAID 1 setup and runs perfectly with iTunes.
    Also, there is a Hauppauge TV tuner running in this PC and, in retrospect, I think may be conflicting with codecs. God forbid you would have multiple codecs installed on one PC....
    I'm not going to sit here and bash WD or Hauppauge, but I'm not a big fan of either of these devices. One of the other things that bothers me is that the RAID is controlled by "Intel Matrix" which is the default software RAID controller in this HP product. There isn't any real control in the management console. All you can do is rebuild a failed array or view an existing configuration. That doesn't really say, "AWESOME" to me. Being an HP product I'm assuming this is pretty standard because it was the default software controller installed on this system.
    Any way you look at it, I really appreciate the posts here. I agree that there is an issue that Apple needs to address. WD or not, the fact that people are having problems getting iTunes to work in Vista needs to be resolved. We pay for our music and our shows and our movies and deserve to have them working and not getting deleted, corrupted, or damaged when we try to play them or transfer them. I love the fact that Apple is incorporating new technology into their products but we pay for that technology and it should work.
    If I hadn't backed up my client's iTunes folder I would have lost everything he paid for. He's a pretty cool guy but how would you feel if you lost a couple grand worth of music, TV, and movies? I would be pretty upset.
    In the end, I think RAID or drive configuration on this PC is one of the major issues. It's something to do with the SATA controller and Vista combined with iTunes / Quicktime. I'm not exactly sure how that could be but I believe it's something Apple / Microsoft needs to investigate...
    Please keep the posts coming as I will be checking here regularily for updates. Thanks for your input and I hope we're able to resolve this issue soon.
    Dell 5100C, Toshiba Satellite P25, Custom Build, iMac G5, Dell SC Power Edge   Other OS  
    Dell 5100C, Toshiba Satellite P25, Custom Build, iMac G5, Dell SC Power Edge   Other OS  

  • Windows Vista Ultimate & iPhone

    Yesterday I received an iPhone for my birthday and discovered it doesn't work with Vista Ultimate. When I called Apple care they told me that the box clearly states only "Vista" as compatible. I find this very odd since I don't know of a plain "Vista". There is Home,Home Premium, Business,Ultimate, etc..
    After some discussion they finally agreed to take it back without the restocking fee but I am still depressed about it.
    Has there been any news about support for ultimate? Why does my iPod and iTunes run perfectly but the phone won't?

    It doesn't work with Windows Vista 64-bit (I've tried) but it does work with Windows Vista Ultimate 32-bit. I'm using it now with no issues.

  • Installation of Database Oracle 9.2.1.0 on Windows VISTA ULTIMATE version

    Dear All
    I am trying to install Database Oracle 9.2.1.0 on Windows VISTA ULTIMATE version, but its not installing and start showing error when start configuration of Listner etc etc
    Is there any wayout to install Database 9.2.1.0 on windows VISTA ULTIMATE version
    I appreciate your prompt response in this regard.
    Salman Haider

    dear
    I m still confused about ur answer.
    What i need to do ? can u describe step by step which is helpful for me to understand?
    Why I install VM on VISTA and How ? What will happen afer installation ?
    Syed Salman Haider

  • MXF clips do not open in CS3 of CS4 (windows vista ultimate)

    I have Sony DXCAM's MXF's which I can not import in Premiere (neither CS3 nor CS4). I did convert the original MXF's using Sony's DXCAM software.
    Adobe claims it supports MXF files. Another editing company which uses CS3 can import XMF's using a Windows XP machine. I work on Vista Ultimate.
    I have an itch that I am missing a vital codec of somekind, but I can not find out why my copies of CS3 and CS4 of Premiere Pro do not allow me to import MXF files. From within the Media browser in CS4 it results in the same disappointing result. It doesn't open.
    When I tried to open one MXF file in CS3 the program crashes and forces me to close it. In CS4 I get an error message after importing which reads; "Unsupported format or damaged file."
    Any help is very much appreciated, as I need to start my editing ASAP>
    Thx!
    Jan.
    System specs short:
    Windows Vista Ultimate
    PC Intel Core2 Duo CPU
    T7800 @ 2.60Ghz
    No Additional codecs installed.
    DXdiag file: http://www.buroklei.nl/upload/JanDiagDOC.zip

    Hi Jim,
    Thanks for your feedback. The first thing I tried was to import the MXF packages (I don't see lone MP4's) into Premiere. That did not work. So I exported the MXF files using Sony's U1 player/recorder.
    I think its a Vista and/or codec problem, as my friend who workes on an XP machine is able to open MXF's in CS3.
    Jan

  • Bootcamp: Sound not working on Windows Vista Ultimate 32-bit

    Hello everyone, I've got quite an unsual problem (whell at least I think anyway). On my iMac (Mid 2008, 2.4Ghz C2D, 2GB ram, 2400XT), I recently installed Windows Vista Ultimate (32 bit). I've been using the sound out of the speakers, until now when I decided to connect some extenal speakers. I have the bootcamp drivers installed (from Snow Leopard DVD). When I plugged the headphone jack into the headphone socket on the back, I noticed that the sound was still coming out of the speakers, so I opened the preferences and it showed that I had something plugged into the line-in jack- which I didn't! I removed the headphone jack from the headphone socket and plugged it into the line-in. Nothing changed in the preferences. So basically, Windows thinks the line-out port is line-in! I would appreciate some help with this issue, not sure how common it is!
    Thanks :-)

    Hi I'm not sure if this is going to help but have you got the service pack 1 installed on your laptop as when I installed it on my desktop the first time it caused blue screen errors and gave me loads of problems including error messages that seemed to come up with every application I opened and an annoying driver IQRL equal or less than but couldn't work out why and then in the end I had so many problems I had to totally reformat my desktop and I removed my XP scanner and webcam(both had vista drivers) and when I reinstalled the service pack 1 it was fine, so do you by any chance have anything attached to your laptop that was XP and has vista drivers as these seemed to be what was causing my errors.
    Also a question about your graphic card drivers, I've got the same laptop as you and was looking for the graphic card driver updates and couldn't find them anywhere on the site, where did you find yours? I'm using Vista Home Premium 32 bit , my model number is A200-28P(PSAE6) and I'd love to know if there is a newer graphics card driver but can't find it on the knowledge base so the fact you've updated yours would you mind pointing a new user in the right direction :-)
    Thanks,
    Simreaper

  • Portege R400-600 - Windows Vista Ultimate - Features On/Off

    . Windows Vista Ultimate - Control Panel / Programs & Features / Turn Windows Feature On / Off - it's impossible to turn anything on, as it always ends up with an error "An error has occurred during the installation."

    > Thanks for the answer. I just use some "advanced programs". Complete reinstall would take about 2 days > - that's how long it took me to configure everything.
    I see that you don't use the Toshiba original image and the OS was configured manually.
    Seems this could be a reason why some OS settings don't functions properly.
    If the OS from Toshiba recovery CD works great then you have simply installed some 3rd applications which have a bad influence on the single options or/and the configured the OS not correctly...
    This is everything what I can suggest

  • Windows vista Ultimate does not recognize ipod

    Hello,
    I have Windows Vista Ultimate and whe I plug my 30GB 5G Ipod it asks for the driver. It does not appear nor on explorer nor itunes.
    I have itunes 7.1.5 installed.
    i did try reseting the ipod but still the same problem.
    I did try my Ipod on an XP computer and it works.
    have anyone solved this compatibility problem or knows how to solve it?

    perhaps try MarkTaylor46's technique from the following post:
    http://discussions.apple.com/thread.jspa?threadID=892874&tstart=15

  • Windows Vista Ultimate and Error -42018

    Hi there,
    I upgraded to Windows Vista Ultimate about a month ago. I was trying to play music and download new content and the new content downloads would stop with -42018 - unexpected error.
    I had to run the compatability wizard and allow Windows XP SP2 settings with administrator access to correct the issue.
    I also lost most of my licensing when I upgraded. Hold off for I-Tunes to work with Vista if you are thinking about upgrading.
    And on a side note, I think that the new Windows Media "Experience" in Vista is not all that great.

    Hi there,
    I upgraded to Windows Vista Ultimate about a month ago. I was trying to play music and download new content and the new content downloads would stop with -42018 - unexpected error.
    I had to run the compatability wizard and allow Windows XP SP2 settings with administrator access to correct the issue.
    I also lost most of my licensing when I upgraded. Hold off for I-Tunes to work with Vista if you are thinking about upgrading.
    And on a side note, I think that the new Windows Media "Experience" in Vista is not all that great.

Maybe you are looking for

  • Display float numbers in APEX report

    Hello,   I have an  interactive report and simple report based on a table with float numbers. Problem is, float numbers with value between 0 and 1 are shown ".1" not "0.1" For example, for values 0.1, 1 and 12.1 I get: .1 1 12.1   If I add format mas

  • Which table can give Operation wise Machine/Labour Std Value Time

    Dear Sir, We need to know the Table name which can be used to get  Operation wise Machine/Labour Std Value Time for a given Production Order . Using CO03 . we can get Std Values displayed for the Machine/Labour Time by double click on the operation .

  • How to get Android apps with dauphin browser

    Hi.. l did try to get Android apps with dauphin browser but it keep sending me back to BB apps what do i have to do to get tout Android apps... Thanks in advance for helping.

  • Option for deleting non-necessary files

    When I began developing my first RoboHelp project, I added some HTML and PDF files which I don't need anymore. I would like to know if there is an option within RoboHelp 7 which could automatically find these files and allow me to delete them. Thank

  • Adobe form language translation

    Hi All, In Adobe form, I found two issues while translating English form to Korean. 1. Bold property is not working in print output. 2. When I am trying to fax, the Korean form fax is not coming. Please kindly advise. Thanks, Anu