Windows Vista: Unable to Install in graphical mode

I try to install NW 2004s ABAP on a VISTA laptop.
After starting the setup.exe I get the following error message:
The installer is unable to run in graphical mode. Try running the installer with the -console or -silent flag.
What does this mean? Where can I change this setting?
Thank you in advance,
Heiko

NSP can't be installed directly on Vista...Please follow this link...
[Intalling minisap (Traial version) on Vista;
You should use VMWare, create an WinXP Host OS and then install NSP on it...
Greetings,
Blag.

Similar Messages

Windows Vista--again- Cannot install Creative Media Sou

Hello. I have a Zen Microphoto. I bought a new computer running window vista home premium 32 bit. I have been tryng to install the creative media source 5 to manange my music and playlists. I prefer this over Media Player. Every time I try to install the program, the setup program stalls with an error message, "searching for installed components" I have tried installing the program with the ZEN plugged into different USB ports and I have tried deleting the driver from the device manager and reinstalling it. Can anyone help me with this??

I would work through the reset procedures given under the various FAQ threads and then try the firmware upgrade again after getting it out of recovery mode as that seems to be the issue. There seem to be a number of threads with things to try. I would not give up but first work through the various suggestions to get it out of recovery mode. Then post separately re the recovery mode problem to see if anyone has ideas for solving that first. Did it go into recovery mode immediately after the firmware upgrade? Will it let you try to do the firmware again?When I connect it takes about 20 secs before the player is recognized by media player. In terms of transfer to your own laptop - do you have a burner on the friends PC for burning a DVD or 2. Or a slower way is multiple transfers using a USB memory stick.

Windows Vista won't install Ipod

Latest version of Itunes 7.4.2 has been installed, unfortunately Windows Vista has located Ipod mini in "other devices" in "Device Manager", but it won't install the Ipod. I've reinstalled Iteune three times and searched the Windows Vista disk, but with no luck.
I'm on the verge of selling the ipod - any advice would be welcome.
Thanks

I suggest either getting a Mac or going back to Windows XP because Vista is known to have these problems.

Windows Vista won't install device driver for Palm Centro

My Windows Vista PC can't seem to find the device driver info to install my new Palm Centro. I've downloaded the latest version of Palm software. Any ideas? Thanks!
Post relates to: Centro (AT&T)
This question was solved.
View Solution.

ch96hh wrote:
I am having the same problem - my computer can't find the device driver (Windows Vista) but I DO have bluetooth installed and visible. Can you help?! I am really not very good with technical things, but I've done a tone of research and haven't been able to solve the problem.
Thanks in advance!
Post relates to: Centro (AT&T)
Read through the several large threads at the top of this section concerning syncing with Vista64...
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Windows Vista won't install

Hey i just got a copy of windows vista but it won't install. i tried to install it using bootcamp but it asks me to start installing on a existing windows. i don't have any windows installed on my mac book. Do i have to install windows xp before installing windows vista?

Moncrief wrote:
Thanks nerowolfe.
I'll start doing my homework.
The obvious: Is vista proving stable on the Mac built in drive?
While some might consider me "lucky," I don't believe i luck. I have had no problems with any of my three Macs which now all run Leopard. My two MBPs were updated, not even an archive and install and they both run fine, as does my old G5.
I installed XP-Pro on my 32-bit MBP when I first got it using BootCamp1.0, beta.
I installed Vista Ult 64-bit on his MBP also under a beta version of BC, 1.2, I believe.
All the Leopards are up to date, as are my Winders OSs. I finished updating this MBP to SP1 this morning. I have never had any problem, issue or anything I would consider serious. I did have the problem some have noted with Leopard, that the WiFI modem would turn off when not used, but that was not a Leopard issue, it was a firmware issue with my Westell modem, which works fine now that I upgraded its firmware.
As of now, I have nothing but praise for both Apple and, yes, Microsoft.
I learned long ago, that when you get down the the processor, it's all the same 1's and 0's
I do research things quite well before actually committing myself, but that should be normal for everyone. Even a daredevil driver or stuntman carefully plans what he does, although it looks as if it's spontaneous.
I use computers for business and pleasure and I need them as tools. I do not fool around with strange software or unplanned updates. So far, that has paid off.

Windows Vista Ultimate Quick Install for Tungsten E2

Well, I have a Tungsten E2, which I use commenly, but not often. I just got a my dad's old computer for Christmas (which is a huge upgrade from mine, which was made in the 1990's I think), and he got me Windows Vista Ultimate for it. I can do everything with it; Palm Desktop, Hotsync, etc. except for using Palm Quick Install. I really don't feel like posting a picture, so I will just describe it. First I have to allow it to run, and then it checks Microsoft for a solution to use it. After that it says "palmOne Quick Install has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
|Close Program|
`````````````
I have noticed around the site that many people are having problems with Vista, but I haven't seen any with this particular problem.
Thanks for reading,
~Aqua
Post relates to: Tungsten E2
Message Edited by Aqua on 12-26-2007 08:29 PM

I am having this problem as well. I can launch Palm Desk top ver. 6.2.2 but Install and Quick Install are not working. Does anyone know a solution?
Thanks!
Post relates to: Tungsten E2

Oracle VM Server - install error - Graphical mode

Hi all!
I hope, you can help me the following problem.
I try to install an Oracle VM server to a FS server.
First, I tried the newest version - OVM S 2.2.1
In the begining Everything is allright.
But after I have to choose the keyboard, the next screen did not come up. Just a blue screen.
I went to the alt+F3 terminal, and I found a warning there:
WARNING Graphical mode is not avaible...Start text mode.
So the screen where I can partition the disk, did not come up..
I tried earlier version too - OVM server 2.1.5, but It is the same problem too.
Can somebody help me in this, what couse this problem, and how can I fix this, and install the O VM server?
Thx in advance!
Peter Kokai

I purchased an Asus Sabertooth motherboard with an I7 4770 cpu and the Oracle VM server fails to detect the motherboard. I am seeing the same error that is posted in the Known Issues list with the Dell 380 Broadcom ethernet adapter.
Do I have a compatibility issue? The disk ISO was being given out at EMC World. I do not know how to tell what version it is.
I tried downloading the 3.2.2 version iso and it seems to have trouble with my USB devices, because my keyboard stops working and I can't select between media cd test or skip.
Are there any workarounds? Should I just wait for a future release?

Can't sync after my windows vista crashed, now installed vista again. Help?

Please help me as i'm trying to sync my iphone after my windows vista crashed but i installed vista again and restored all my backup from previous windows, now what can i do in order to sync my iphone?

It tries to sync but only for a few seconds and it goes away without syncing at all. It acts like it synced but it never does. There are no error messages displayed.

C50-A-1DV Windows 10 Unable to install DTS Sound

Hello, after upgrading to Windows 10 (Which the software upgrade page reports as supported), I am unable to install drivers for DTS Sound, which was installed before I upgraded, as the installer comes up with "This product does not support DTS sound processing", despite the fact it worked fine with Windows 8.1. Is there a fix/different install for this, as I am unable to play sound on my laptop now.

Satellite C50-A-1DV (PSCG6E-08P01CEN)
Watch this site for a Windows 10 version.

Windows vista itunes wont install says disk is locked, windows vista itunes wont install says disk is locked, windows vista itunes wont install says disk is locked

After it downloads and i click the icon it says disk is locked and something about a license I have windows vista and i am the administrator

Which error are you getting? Are you getting the "locked disk" or the "cannot be found or created"?

IPad - Windows Vista unable to locate Apple Mobile Device (Recovery Mode)

Hey everyone , I am at my wits end trying to fix this problem . Having spent hours and hours researching a solution I am no closer to finding a resolution.
The problem began during a software update last week ( I have an original iPad , prior to this I had used it on my PC for nearly 12 months without issue).
During the software update it started coming up with a "Found New Hardware Apple Mobile Device Recovery mode" then "Browse for Driver software" , so I direct it to C:ProgrammeFiles\Apple\Mobile Device Support\Driver etc .... however it still cant locate it.
Now - the iPad is stuck in Recovery Mode. It has been nearly a week now.
Here is what Ive tried
Confirmed Apple Mobile USB installed and working
Followed the Apple Support prompts re drivers to a tee
Tried manual update of Driver
Updated to latest iTUNES
Uninstalled then reinstalled driver
Read post after post on "similar" issues
Nothing is helping
Please , please , please , pleeeeeeeeeease can you guys help ?
Please note following
My iPOD Classic is recognised fine by my PC and is 100% working
I havnt completely deleted itunes then reinstalled because post after post tells me this doesnt fix this particular issue
During the software update initially it was coming up with a 604 error / Restore as well as the Driver issue , now my ipad is not recognised at all by Windows
Yes - I could take it too another PC to restore , but I want it synced to my PC and ITUNES library
I feel I'm no Computer Dummy , but this one is a total head scratcher
Heeeeeeeeeeeeeeeeeeeeeelp !!!!!!!!!!

Fixed.
Took iPAD to Apple store who restored back to factory setting.
Brought home and it synced fine
Back up and running
Diagnosis ? probably some soft ware update glitch
Lesson ? - dont waste your time reinstalling Itunes for this problem

Windows Vista / 7 64 Install Error

Not sure how many people are having this issue in Windows 7 64 / Vista 64, but I've found a fix. The issue is when you try to install iTunes, you get an error like "Could not open Key: UNKNOWN\Components...blah blah blah. Access is denied." What worked for me:
1. Open regedit (run: regedit)
2. Navigate to HKEYLOCALMACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Co mponents
3. Right click "Components" and selec Permissions
4. Click "Advanced"
5. Click the "Owner" tab
6. Under "Change Owner To", select your administrator account (not the "Administrators" account).
7. Click Ok and exit the registry.
8. Try to reinstall iTunes.
I can't say this will work for everyone, it's just what ended up working for me. Good luck!

I FIXED MINE!! This is what I did:
1. Select "Start", "Run", and type "RegEdt32"(for VISTA "regedit"). Click OK.
2. Select HKEYLOCALMACHINE
3. In the menu, select "Edit", "Permissions". A dialog will come up.
4. Check "Allow" for "Read" and for "Full Control", then click OK
5. Expand HKEYLOCALMACHINE and repeat steps 3, 4 for the keys "Software" and "System"
6. Expand the "Software" key, and repeat steps 3, 4 for "Classes"
7. Expand the "Classes" key, and repeat steps 3, 4 for "Installer"
8. If you have made any changes in steps 1 through 7, skip to step 10. If you did not make any changes, continue with step 9.
9.Open the "Classes" key, and click on "Installer" . In the menu, click "Security", "Permissions." Click the button marked "Advanced." Check "Reset Permissions on all child objects.", then click OK
10. Close the registry editor
11. Reboot the computer
then run iTunes install again.
Message was edited by: Rob Burt

BootCamp made for Windows Vista would not install in WIndows 7

Hi,
I am trying to install Bootcamp drivers on Windows 7 with the Mac OS CD that came with my Intel-based iMac. The problem is that I bought my iMac when the latest Windows was Vista, and it would not install on Windows 7. The Bootcamp drivers for Windows 7 on Apple Support pages are "UPDATES" that require BootCamp 3.0 already installed in Windows. However, I cannot install BootCamp 3.0 in the first place, because it would be installed only on Vista. What should I do to have BootCamp installed on my Windows 7 so that I can set the default booting OS to be Mac OS again?

Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows.
Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & Windows, everyone there has or at least has an interest. You may attract help more quickly there.
The Forums are at the bottom of the main Apple Discussions page under Windows Compatible Technology. Here is a link;
Boot Camp: Installation and Storage
Dah•veed

Satellite L650-10D - Unable to install any graphic driver

Hi,
I have just spend most of the day trying to get this laptop to use proper resolution. Story:
The HDD failed and I had to get a new one. I downloaded Windows 7 Home Premium and installed everything from the scratch on a new HDD. The serial from the back of the machine worked fine with the Windows (fortunately).
After downloading a lot of drivers from Toshiba website I got working everything except the Display. At the moment the Windows is using: "Standard VGA graphics driver" which can not go furher then 1024x768, very annoying.
Steps I tried:
1) I downloaded "tc70077100m" AMD driver from the website.
Installation of the ATI Catalyst went thru, but the drivers were not changed.
2) Double clicking on "tinstall" or "tinstallwb" in the unpacked driver directories resolves in briefly seeing the icon on task bar after which the installer exits, nothing else, no error. Very professional ...
3) I tried manually updating the driver using the Device Manger pointing to directly to the file from the package. First I got warning, that the driver is not compatible, but I forced it to continue. I picked "ATI Mobility Radeon HD 5650". The installation failed saying that my version of Windows is not compatible.
4) I also tried downloading drivers from ATI website, which failed each time saying my software/hardware was not compatible.
5) I also tried downloading drivers for other L650 notebooks (the Intel ones) which failed for incompatibility.
Please advice how can one install graphic driver on this device. I am not after gaming, I'd just like to get reasonable resolution.
Regards

Hi kotatko,
Your notebook is equipped with ATI graphic card so other display drivers like Intel will not work. You have to install the display driver from official Toshiba page:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Before you start with display driver installation make sure that *chipset driver* is installed. The chipset driver can be downloaded on Toshiba page too.
May I ask you why you dont use the Toshiba recovery disk with all drivers and tools that is more comfortable?

Windows Vista is not installing using MDT 2012 update 1

I have created a media using selection profile in MDT 2012 update 1, but it is not deploying my physical machine. I get error message that Windows Cannot copy files required for installation. Make Sure all files required for installations are available.
However i have successfully deployed Windows & and Windows XP with MDT 2012.
I also used different iso image of vista but still i get same error message.

Looks like you have a *NEW* issue that is unrelated to this thread. Generally I recommend that you open a new thread.
How to Debug missing Drivers in MDT Litetouch
I see that you say there are *Problems* but you don't list which devices or drivers are missing.
From your Bdd.log file I can see that the following drivers are getting copied locally:
xcopy /seihycd "D:\Deploy\Out-of-box Drivers\Net\e1c60x64_12.6.45.0_63DFBEA09BC1202B9E644652FC90898475BD80F6" "C:\Drivers\Net\e1c60x64_12.6.45.0_63DFBEA09BC1202B9E644652FC90898475BD80F6"
xcopy /seihycd "D:\Deploy\Out-of-box Drivers\Net\e1c62x64_12.6.45.0_81A271BF21927B572C82D21D23EF89BD7E0ED315" "C:\Drivers\Net\e1c62x64_12.6.45.0_81A271BF21927B572C82D21D23EF89BD7E0ED315"
xcopy /seihycd "D:\Deploy\Out-of-box Drivers\Net\e1c63x64_12.6.45.0_5B2448F2D9E89D0D8A718B71175BC6A559C8DC6A" "C:\Drivers\Net\e1c63x64_12.6.45.0_5B2448F2D9E89D0D8A718B71175BC6A559C8DC6A"
xcopy /seihycd "D:\Deploy\Out-of-box Drivers\System\2008s4el_9.1.9.1005_2CA3E45C2F9AFCC12681EC010E1D73FEA7613AA9" "C:\Drivers\System\2008s4el_9.1.9.1005_2CA3E45C2F9AFCC12681EC010E1D73FEA7613AA9"
xcopy /seihycd "D:\Deploy\Out-of-box Drivers\System\cdvcore_9.2.2.1039_5676255595E54B75DA4EBCF4BB54B7CBA83C68D4" "C:\Drivers\System\cdvcore_9.2.2.1039_5676255595E54B75DA4EBCF4BB54B7CBA83C68D4"
However I can't tell what the problem is.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Windows Vista: Unable to Install in graphical mode

Similar Messages

Maybe you are looking for