Windows Vista update has disabled full screen minimize feature when watching videos

After recent Vista update I can no longer connect to hyperlinks in emails and fullscreen video function disables functionality and I can no longer stop or minimize videos until a system reboot.  Hoe do I restore to before the update?

It was an Explorer update not Vista.  Any help appreciated

Similar Messages

  • Windows vista update has killed my sound !!

    + hey everyone , i really need some help in here i have a sound blaster 5. , lil bit old , not lil bit , its really old ! anyway after the windows vista latest patch was installed , i turn on the pc and there was no sound !! , the sound icon appears in the right bottom of the screen , but there is no sound comin out of the speakers , i tried to look for the latest driver for my sound card and i installed it and didnt work , for godsake wat should i do to get the sound back again ?

    Remove the driver and reinstal the latest one from creative site, would definatly help

  • My iPhone 5 screen turns green when watching videos or using FaceTime

    When I watch videos or use FaceTime on my iPhone the screen turns green and I can only hear the sound. I have reset and turned off as suggested but still no joy.
    Any other suggestions? This just randomly started happening one day.
    thank you
    Claire

    update to above - its a 5c I'm using.

  • Satellite L405D-11V - Freezes and screen goes black when watching video

    Ok, so I have the Toshiba Satellite L405D-11V, I have had a fault, basically, the computer would freeze at any time and the screen would go black, with the fan and lights still going, this could be on start-up, or a few hours into using the laptop, so I decided to ring up Toshiba's tech support and they arranged for my laptop to be collected and sent off for repairs.
    I was able to track the repairs online through the tracking service, and was able to see what they were doing to my laptop, it said that they ordered a part, it was in progress and the repairs were finished.
    However, I got the laptop back today, I turn it on, everything is fine, I start using the laptop everything is fine, then I decide to watch a video on youtube, and it freezes again, so, I power off holding down the power button, hoping it was just a one off, I turn it back on, and load up the video again, it freezes and the screen goes black again, after working out that when ever I watch a video or play a game, it causes the computer to crash and freeze like before the repairs. So there is still a fault, but im not sure what to do
    Its still under warranty, I purchased the laptop from Comet, but I dont really want to send the laptop off for repairs again and to find it will come back with the same fault, is it worth sending it off again, perhaps seeing if comet will replace the laptop as its still under a year of buying the laptop, or is it just gonna be worth saving all the hassle and buying a new laptop? If this fault has happened to anyone else, I could sure use some help, and if someone could shed a little light as to what might be wrong?
    Thanks

    Hi buddy,
    Did you change something on configuration after you got your notebook back from repair? Did you update a driver or something else?
    What operating system you are using on your Satellite L405D?
    To be honest its really hard to say why it happens because the technicians test everything to check if your notebook runs properly.
    In my opinion you should try updating the display driver. Maybe its causing the issue
    If not I would recommend installing Windows from Toshiba recovery disk to restore factory settings. These settings are pretested by Toshiba and should work.
    If you still have the problem you must contact the technicians again. I mean you could track the repair online and according your posting everything worked well during repair so in my opinion it shouldnt be a problem to contact the guys exactly.
    Explain your problem very detailed. I think everything can be clarified then. :)

  • I downloaded the latest important update to windows vista yesterday, and since then Firefox crashes very soon after enetering the portal of any website I visit, and I want to know if the windows vista update could be doing this?

    Yesterday (23rd March) my computer appeared to perform an auto update of windows vista and since then every time time use firefox it crashes shortly after entering a web portal (after about 1-5 seconds). It even crashes on the BBC news page which I always use to check stability. I have been using Firefox for years and it has just started doing this. However, I examined the programme files and actaully cannot see a windows vista update for yesterday, but I can see that there was a Firefox update, so now I'm a bit confused. Looking at the program files in more details it appears that there was a very major update of Firefox taking place including lots of file extensions. You should also know that your password recovery process doesn't work. I never got the email that is supposed to help me recover a lost password. I am really disappointed with Firefox doing this. It's costing me time and money. Can you help before I give up and go back to using Windows explorer (ugh!). I have thought of simply removing Firefox and starting again with a new download but that might not solve the probelm and I will lose my bookmarks.

    I have an update to my message posted yesterday regarding Firefox crash after vista update. Today it got worse when Firefox wouldn't open at all and Windows explorer also stopped working. Curiously, email was still working, and when I checked another (little used) account on the same PC, I got a perfect connection with Firefox and Explorer. I had to conclude that the latest updates of Vista have interacted with some application only found in my main account on the PC. I tried opening Firefox in its safe mode and I tried opening explorer without Plug ins, but neither worked. Finally I decided the only answer was to do a system restore and wind back the windows software to where it was before the problem. I now have Firefox and explorer restored to working order, but I still don't understand why, because I got a message saying the system restore hasn't worked. Full Comprehension of the cause is beyond my capability, but through trial and error as described above I seem to have fixed it. The suspect vista updates are KB2505189 , and KB2524375.

  • Satellite A205-S4607 doesn't start after windows vista update

    Hello,
    I was installing windows vista updates, but the battery was low and the computer turned off, then, the computer doesn´t start, only the hard disc led is light but the screen is black, please can you help me?
    The model is Satellite A205 -S4607

    Thanks for your advice, but the problem is very complicate, the computer doesn't boot up, only the led te HD is ligthing, I removed the HD and the memory but doesn't work, I've read that the problem could be the bios, and the recomendation is remove the battery of the board to reset the bios, but I think it is very dangerous.
    Message was edited by: Nvillegas

  • T61 no sound after Windows (Vista) update (?)

    I have purchased a T61 in December 2007. The sound has always been low and now i have no sound at all.  I cannot hear files locally or on the Net -- or any of the computer sounds.
    i realize now that it has happened after a Windows (Vista) update.  I have done every step but 6.
    I have Speakers (SoundMax Integrated Digital HD Audio). The sound keeps defaulting to to Line 2 Muv Enum (Virtual Cable). 
    http://support.microsoft.com/kb/948481
    >> Update -- perhaps this will help someone else. After doing steps 1-5 (at support link), I redid step #3 and now it's working.
    Message Edited by Suntea on 06-27-2008 12:50 PM

    I have purchased a T61 in December 2007. The sound has always been low and now i have no sound at all.  I cannot hear files locally or on the Net -- or any of the computer sounds.
    i realize now that it has happened after a Windows (Vista) update.  I have done every step but 6.
    I have Speakers (SoundMax Integrated Digital HD Audio). The sound keeps defaulting to to Line 2 Muv Enum (Virtual Cable). 
    http://support.microsoft.com/kb/948481
    >> Update -- perhaps this will help someone else. After doing steps 1-5 (at support link), I redid step #3 and now it's working.
    Message Edited by Suntea on 06-27-2008 12:50 PM

  • Recent Windows 7 Update has killed windows

    Help, I run Windows 7 in Bootcamp, recent windows 7 update has killed windows, this is what happens.
    Choose to boot to windows - OK
    Hit logon screen - OK
    Logon - OK
    Windows loads, the desktop shows for about 5 seconds and then the screen goes blank.
    The computer is still ON but the screen is blank.
    I can boot into safemode OK, but can't run the bootcamp update (that I downloaded from here) in safemode.
    I tried a restore point, but the ones before the update create an error, so thats a no go.
    My thoughts are that it is a video driver issue, but that doesn't explain how it gets passed logon working OK.
    I don't know how to fix this if the only way to update drivers is via an .exe vs the driver files themselves like windows usually likes.

    You could try this advice from the Windows side.
    Startup Repair is a good place to start if your system starts acting up. If you can’t get the Advanced Boot Options screen by hitting F8, you can also access the tools by booting from a System Recovery Disc, or the Windows installation disc. While System Repair might not be able to recover your system in all situations, it’s a great starting point before getting into more detailed recoveries like Restoring from an image or clean install.
    http://windows.microsoft.com/en-US/windows7/What-are-the-system-recovery-options -in-Windows-7

  • Window does not open to full screen???

    This one has me stumped. I recently installed / upgraded to CS5.1, set up all my preferences, keyboard shortcuts, presets, plugins. All worked fine, day in - day out,  for the last three weeks.
    About three days ago this anomaly appeared...
    When I zoom in (cmd +/), the window will resize, but only part way. The window will move over flush right on the monitor, but leave about one inch of space between the window and the left side of the monitor, and increase in size until it fits aprox 2/3rds of the monitor / screen. It stops enlarging and leaves about 3 inches of space between the window and the bottom of the screen. At that point I get scroll bars. So I end up with a much smaller window to work in.
    I can grab the bottom right corner of the window, pull it open to fill the screen, but as soon as I go to zoom in or out, the window jumps back to the smaller size with the gap on the left side and bottom.
    It's driving me crazy!! having to work in such a small window.
    Option bar is "Standard Screen Mode"
    All my pallets are on a separate monitor, so nothing else is on my main monitor that would limit the size of my window as I zoom in.
    My preferences are set to:
    • Zoom Resizes Windows
    • Enable Flick Panning (works fine)
    • Animated Zoom
    OS 10.5x
    10GB ram
    I don't know if I inadvertently changed something to cause this. So I'm hoping someone here can solve this issue.
    Thanks in advance!
    JeffN

    Grant,
    upon further investigation, the "application frame" yields other unwanted effects.
    That setting gives me tabbed viewing (which I don't want), even though I have that turned off in preferences. When I open multiple documents they open not as individual windows, but as a tab in the one open window. When I go into the options bar and set the "arrange documents" to "float in windows", I get the individual windows, but then I get the same problem of the windows not zooming to the full screen, as stated in my original posting.
    Also, just saw that even with the "application frame" checked, when I open a smart object layer, that window still has the same zoom issue.
    So the problem still exists.
    Any other ideas?
    fyi: here is a screen capture of the original screen / zoom issue.
    You can see the gray space on the left and bottom. The scroll bars are showing and the window will not get any larger.
    Thanks JeffN
    Message was edited by: JeffN3

  • Disable full screen

    How can I disable full screen permanently?
    I am aware of the option click but that's not really good enough when you run a dual head setup.

    You don't unfortunately.
    As an alternate to the Option-click the green button for zooming a window, you can also just double-click any app window's title bar for the same effect, if you don't have the minimise option checked in System Preferences > Dock

  • How can i turn the inbox window in ipad mail into full screen size?

    When we open the mail on our ipad, there is a inbox window shows up at the left on top of a mail.
    Can i turn the inbox window into a full screen display size?
    PS: My boss told me that she saw someone has the full screen inbox on his/her ipad and she want me to do the same for her,
    but i realy have no idea how to make that happen.
    Please can anybody tells how to set that up!!! I realy appreciate!!! Please...... help......
    Thanks a lot.....
    Add:Thank you very much rbrylawski. i was saying the same to my boss but she insist that she saw someone's ipad had a
    full screen inbox, that drives my crazy...... please guys if you seen the page atleast leave some words like rbrylawski here so i
    might print this page out as a evidence to prove what my boss asked is a mission impossible otherwise she wouldn't believe me.
    Please guys help me out !!! Thank you very much!!!

    As far I'm aware, what you're asking to do is not a native feature of iPad.  In other words, I don't believe this can be done.

  • Windows Vista Update posts 64bit driver for Qosmio F30 32bit Vista

    Hello
    Today I've noticed that Windows Vista update is posting the wrong update for one of Qosmio F30 drivers.
    I have Windows Vista 32Bit but Windows Update post a 64bit version of the driver.
    see the screenshot [Here|http://imagefilehost.googlepages.com/f30Wrongupdate.jpg]
    Any idea?

    hmm... this is strange ?:|
    The Toshiba x64 ACPI compliant driver means definitely a 64bit version!!!
    I dont know why the Vista driver update notification reports an 64bit driver for a 32bit OS but usually the 64bit driver shouldn't be compatible with the 32bit OS.
    However, the case seems to be clear dont install it if the driver is not designed for your OS.
    Regards

  • Disable full screen safari on iPhone

    After upgrading to iOS 7, I noticed that the toolbar disappears in safari while browsing.  I am a heavy user of the back button and the bookmarks button.  Both of them only require a single touch to use in iOS 6.  Now that the toolbar disappears, if I want to use the back button, I either have swipe completely left to right or swipe down to get the toolbar back so I can use the back button.  For the bookmarks button, I have to swipe down to bring back the toolbar and then I can use it.  Alternatively, I can try to chicken peck the bottom of the screen with the hopes that the toolbar will reappear.  If I use this alternative approach, sometimes it works, sometimes nothing happens, and sometimes I hit an ad by mistake. 
    Is there a way to disable full screen mode in safari on iPhone?  I will gladly give up the additional real estate to have a persistent toolbar.  It works better with the way I browse.

    Try this app. I've used it for a year or so and it takes full screen pics. It doesnt offer a ton of advanced functionality but it works. It also allows users to take photos by tapping anywhere on the screen (which was my original reason for downloading).  Enjoy
    SuperFast Camera
    https://itunes.apple.com/us/app/superfast-camera/id500659062?mt=8

  • Agent has disabled full monitoring of this target. Only target Status is being monitored.

    The following warning is displayed when going through the following:
    Database instance (target type)
    Oracle Database > Monitoring > All Metrics
    "Agent has disabled full monitoring of this target. Only target Status is being monitored."
    Triggered by the following:
    Summary
    Due to 5 hung threads, the target is having all collections disabled
    Internal Event Name
    CollectionsDisabled:HungThreads
    Event Type
    Target Monitoring Disruption
    Category
    Unclassified
    Following actions executed to attempt resolution:
    + Database has been bounced, error is resolved
    + Clearstate agent
    + re-enable all collections manually: Metric and Collection Settings > collection schedule column; enable
    + Bounce agent
    OMS Version: 12.1.0.4.0
    Agent Version: 12.1.0.4.0
    Anybody have any ideas on how to clear this error?

    emctl clearstate agent TARGETNAME,TARGETTYPE
    emctl status agent scheduler
    emctl status agent target <Instance_name>,oracle_database
    emctl status agent dbconnections
    Try to colelct the particulare metric
    emctl control agent runCollection TARGETNAME:TARGETTYPE COLLECTIONITEM
    Finally, Observer the error message any on the log
    agent_inst/sysman/log/gcagent.log

  • Lack of All format playable Video player with Full Screen STRETCH feature

    I am a big fan of Nokia and i know Windows phone is the world best smart phone.im using Lumia 820. but in my highend Lumia devices lack of a
    All format playable Video player (like mkv etc.)officially from Nokia or Microsoft.pls this is very important thing for all Lumia user for HD movie experience.pls update current video player.now I'm using Moli player but there is 1
    vital feature is missing...this is Full Screen STRETCH...when i play movie using Moli player on my phone screen upper and lower portion appear black bar.It mean Ascept ratio not match.This is very important for full screen movie exp.But  this
    feature is also available on Android  MX player.
             So,I request you please update current video player with
    Full Screen STRETCH feature for windows phone user.Thank you.

    Hello,
    You should ask in the
    Windows Phone forums on the Microsoft Community forums.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Maybe you are looking for