Windows Vista Update posts 64bit driver for Qosmio F30 32bit Vista

Hello
Today I've noticed that Windows Vista update is posting the wrong update for one of Qosmio F30 drivers.
I have Windows Vista 32Bit but Windows Update post a 64bit version of the driver.
see the screenshot [Here|http://imagefilehost.googlepages.com/f30Wrongupdate.jpg]
Any idea?

hmm... this is strange ?:|
The Toshiba x64 ACPI compliant driver means definitely a 64bit version!!!
I dont know why the Vista driver update notification reports an 64bit driver for a 32bit OS but usually the 64bit driver shouldn't be compatible with the 32bit OS.
However, the case seems to be clear dont install it if the driver is not designed for your OS.
Regards

Similar Messages

  • Need USB drivers for Qosmio F30-112

    plz.... I need USB driver for Qosmio F30-112
    coz USB does not work properly

    Hi mate,
    your description is really, really short. Could you please describe more detailed WHY ITS NOT WORKING and what you have attached at your USB-ports.
    I ask it, because USB under XP/Vista does not need any drivers. By the way ,which operating system is installed on your machine?
    Greetings

  • Where can I download a Windows 7 64bit driver for the hp CDDVDW TS-L633N on my cpq60-615DX

    EDIT --
    I neglected to say that I tried updating the driver from the Device Manager device window and the result was a message saying it could not find a newer driver, that the one installed was correct.
    Another EDIT
    I also did not say that I  have uninstalled the device, through Device Manager. Upon restarting the system, the drive was found and software installed but the problem remains.
    Original message follows:
    System: CPQ60-615DX
    Windows 7 Home Premium 64bit
    Drive: hp CDDVDW TS-L633N
    In the process of installing some Roxio software, Creator 9, an unusable driver, are part of one, was installed. Now the device is not working.
    When I didn't see on the list of devices on Windows Explorer, I went to Device Manager and found that it was flagged with the "problem" icon (exclamation  point on a yellow background).
    The General Tab Device Status box contains"
    A driver (service) for this device has been disabled.  An alternate driver may be providing this functionality. (Code 32)
    The following information is shown for the device:
    hp CDDVDW TS-L633N ATA Device Properties windo
    Driver Tab:
    hp CDDVDW TS-L633N ATA Device
    Driver Provider: Microsoft
    Driver Date:     6/21/2006
    Driver Version:  6.1.7601.17514
    Digtal Signer:   Microsoft Windows
    Driver File Details:
    hp CDDVDW TS-L633N ATA Device
    Driver files: c:\Windows\system32\Drivers\cdrom.sys
    Provider:         Microsoft Corporation
    File Version:     6.1.7600.16385 (win7_rtm.090713-1255)
    Copyright:        Microsoft Corporation. All rights reserved.
    Digital Signer:   Microsoft Windows
    c:\Windows\System32Drivers\PxHlpa64.sys
    Provider:         Sonic Solutions
    File version:     2.03.27a
    Copyright:        Copyright 2003 Sonic Software
    Digital Signer:   Not digitally signed
    It appears that the Creator install installed part of the driver but not one that functions. It might be a problem with Windows 7 or the fact that this install is 64 bits.
    I have searched the HP site and can't find a driver for the device. When I look at the list of drivers available for this system, the optical drive is not shown.
    I downloaded and installed the HP driver search program - or whatever it is called - and ran it. There were no devices listed on "Optical Drive" tab when I looked at the results - it could not "see" the drive.
    I realize that what I need is probably a generic driver from MS, that's why one is not shown on the HP site, but how do I go about finding the right one for this device?
    Is there a generic "one size fits all" driver for Windows 7 which can drive this device?
    Any assistance will be greatly appreciated.
    Bob and Simon
    This question was solved.
    View Solution.

    HI nhgfdstr:
    Thank you for your inquiry.  I am pleased to assist  you!!
    I am sending you a link to a "CD/DVD Drive Is Not Detected (Windows 7)"  click here.  For your convenience here is a document on "Downloading or Updating Software and Drivers for HP Computers"   click here.   I am also sending  you  a link, to third party site, with a driver for your hp CDDVDW TS-L633N ,  " Hp CDDVDW TS-L633N ATA Device Drivers Download"  click here.
    Happy Holidays!!!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Windows Could not find the Driver for your Apple iPod USB Device (5G 30GB)

    I have a 8GB iPod Nano. My roommate has a 30GB 5G Video. Black.
    My iPod syncs flawlessly. His is not recognized by Windows or iTunes. Every time we plug in the iPod, it prompts us for the driver. I tried to install the update apple mentions through the windows process, but after going through the tedious Windows Genuine Verification process, I was told that the update didn't apply to my computer.
    We use a Lenovo Thinkpad T60p, which shipped with Windows Vista Business.
    We are running iTunes 7.3.1.3, and there are no windows updates available for the computer.
    I have...
    ...reset
    ...reinstalled 7.3.1.3 (over and over and over)
    ...tried different USB ports. (Early on, we saw it once after swapping ports).
    ...tried turning off the ability of the computer to 'Turn this device off to save power."
    I have also verified that the iPod works on my work Dell Lattitude D620 running XP, and that it's not the cord, as we've used the cord that came with my Nano as well.
    So, the problem seems to be with vista, as many people seem to have had. The best thread I found that deals with this was http://discussions.apple.com/thread.jspa?threadID=995793.
    But even after having tried everything, I still have an unrecognizable iPod.
    When I run iPod diagonostics, everything seems okay, except for the iPod connection, which says failed. I've had difficulty working with the iPod service under Computer/Device Manager - it doesn't ever seem to stop or start, with the iPod plugged in or not.
    And interestingly enough, the FAT32 external harddrive that I use to back up my data exhibits exactly the same problem ("Windows could not find the driver for your USB Mass Storage Device). This device worked great in XP, and even odder, I have a FAT32 partition of the main HD as a swap space between my VistaOS and my Ubuntu installation.
    Do I have to chalk this up to another issue with Windows Vista? What bothers me there is that you're a ping-pong between windows support and apple support - no one really owns up the problem.

    Bill, I've been stuck in this loop for 3 months since buying a new laptop with Vista Basic. I've tried everything to no avail. I don't know what else to do apart from buying a cheap PC running XP. Let me know if you manage to find a solution and I'll do the same.
    Regards. Adam

  • Windows cannot load the device driver for this hardware. The driver may be corrupted or missing.

    I'm having the error "Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)" and I can't read/write CDs/DVDs. When I try to update the driver  I have the message that it is already up to date.
    I can't find the driver to dowload and try to fix the problem. Where can I download it or solve somehow my problem?

    Hi juigarashi,
    Microsofts automated troubleshooting service on the link below may help
    CD/DVD Repair
    Hope it works for you.
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • No driver for system speaker dv9823em Vista 32 SP2 D E

    No driver for system speaker  dv9823em  Vista 32 SP2 
    NO Audio Output Device Istaled   ##  i instaled   KB979482)   that help but work 1 day and tan again  no voice  , i think that is sabtage  , 
    i talking about Hight definition Conexant Audio  ,   ( Smart Audio Studio 2.23.0.0 not working )    
    1/ all is fine ,  but i think System speaker can you update   , system said  all is fine  ))  but in finaly you have not driver  , and driver is not loaded  ,  
      Hight  Definition colector    ,    Hight Definition  Audio device  ,
    if was all ok , Hight Definition  Audio device  , has driver  ,  32\drivers\drkm.sys , 32\drivers\Hdaudio.sys  , 32\drivers\portcls.sys ,  32\sysFxUI.dll  , system32/WMALFXGHXDSP.dll
    Mirrosoft said that System Speaker need new driver and i must check fabric ))  i did    https://www.conexant.com/Product/Audio/pchdaudio/Pages/default.aspx
    but there is not one file wich has maybe  44 KB   before was  oem28.inf  not working or  WiSVHe5.inf    
    i loosed my DVD  i have new as USB  Se-208  ,  but i need Signal , some program saying that i have Signal Audio , 
    Problem 2 , if i instaled REALTEK all was fine but in Finaly after 5 min istaling driver he said that have not Diriver fr MEDIA  )))) 
    i think all this problem make Cyberlink , i can delte all HP QUCK due he Cyberlink as all deal in Registry own Directory 
    if somebody know how make tis deal i  need VOICE   , if somebody has  instaled in dv9823em    Unbutu 12.04 multiarch  ,  i will be appy if you send me driver for Ateros  , chips  , and System Speaker  or  wirelessN 150 ,   N10  ,  i will be happy   , maybe UBUNTU will be better  ,    rudolfsindelar AT  msn DOT   com

    3 february 2014 
    HI , 
    Vista 32 , SP 2
    SOUND problem  :
    ACPI x86 based                                 //  NO conected 
    Nvidia n Force  PCI managnent    //  NO conected
    Battery disaper in icon screen   :  i   disabled  Microsoft ACPI compliant control  metod   #### not help , is same 
    2x IDE / ATAPI controllers      ( mshdc.inf ,   ms-driver ,          //  NO conected
    Microsoft ACPI compliant Embedded controller   //  NO conected  
    ADM Hyper trasport (tm) configuration   //  NO conected
    ADM  Address MAp configuration     //  NO conected 
    ADM DRAM  and Hyper transport (TM) trace mode confioguration  //  NO conected 
    ADM MIsceleneous configuration  //  NO conected  
    2x PCI Standart RAM Contrller  //  NO conected   
    higt precision timer                      //  NO conected  
      System bord                                  //  NO conected  
    3x mother board resource           //  NO conected  
    system speaker                          //  NO conected 
    PCI BUS !!!!!!!!!!!!!!!!!!   Memory Range C0000000 - FEBFFFFF not available.
    Moterhboard  :   Memory summary :              Wrong value  reported by BIOS  
    memory type  :  DDR2   &isntaled memory    3072 MB , available memory  3007 MB , channels 1 , 
    MAXIMUM CAPACITY :  2048 MB  [ wrong  value ] 
    maximum memory module size  : unknow  
    Memory slots :  2 
    Error corection : NON 
    Belarc Advisor 
    Board: Quanta 30D1 85.26
    Bus Clock: 200 megahertz
    BIOS: Hewlett-Packard F.34 03/22/2011
    3008 Megabytes Usable Installed Memory
    Slot 'DIMM 1' has 2048 MB
    Slot 'DIMM 2' has 1024 MB
    Bus Adapters    
    Microsoft iSCSI Initiator
    Virtual CloneDrive
    HUAWEI Mobile Connect - Bus Enumerate Device
    Standard Enhanced PCI to USB Host Controller (2x)
    Standard OpenHCD USB Host Controller (2x)
    Good news  : 
    Hight definition controller            HDudbus    //  conected  
    Hight definition AUdio device      HDAudAddService   (Media  )   //  NO conected 
    Hight definition AUdio device      HDAudAddService   (Media  )   //   conected 
    can you send list  from device manager all  ##system device ##maybe there is not one  , 
    i will solve today Memory range but that will be pretty hard task ))) 
    you think that will be good idea for my pc  ??   #### To resolve this behavior, disable the ISA-to-PCI routing feature to allow these PC Cards to function in laptop computers:
    Start Registry Editor (Regedit.exe).
    Locate and click to select the following key in the registry:HKEY_LOCAL_MACHINE \System\        CurrentControlSet\Services\        PCMCIA\         Parameters
    On the Edit menu, click New, click DWORD Value, type DisableIsaToPciRouting in the NewValue box, and then press ENTER.
    Click to select DisableIsaToPciRouting, click Edit, and then click Modify.
    In the Value data box, type 1, and then click OK.
    Quit Registry Editor.
    is applicable   ?
    Rudolf  

  • Need Windows 7 (64 bit) wlan driver for HP R249TU - Product # L2Z88PA

    Urgent need of Windows 7 (64 bit) wlan driver for HP R249TU - Product # L2Z88PA.
    I have tried installing both of the drivers from here (http://support.hp.com/us-en/drivers/selfservice/HP-15-r200-Notebook-PC-series/7486447/model/7748033#...).
    But both of atheros and broadcom are not installing.
    This question was solved.
    View Solution.

    Hi,
    Instals:
    Realtek RTL8723BE  Wi-Fi
    http://ftp.hp.com/pub/softpaq/sp66001-66500/sp66190.exe
    Also you may need:
    Realtek RTL8723BE Bluetooth Driver
    http://ftp.hp.com/pub/softpaq/sp66001-66500/sp66329.exe
    Regards.

  • Will there ever be an updated Switchable Graphics driver for W500 (Vista)?

    Well the current driver is quite old and I failed in modding the current Switchable Graphics driver to include new drivers.
    So, will there ever be an update for Switchable Graphics in Vista for the W500?

    I don't think there will be for Vista; it doesn't support heterogeneous adapters, and the Vista package uses an AMD proprietary driver wrapper which I doubt will see further update.
    For us on Windows 7, we're able to apply the latest Catalyst drivers with good results. (11.4 is FAST.)
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Windows 7 64bit driver for HP 1280 deskjet

    Hi can anyone please supply me with a link where I can download a driver for my HP 1280 printer. for windows 7.
    Thx andre
    This question was solved.
    View Solution.

    Grrrrrrr SOOOOOOOOOOO frustrated!!!!
    FInally find something in the forum to connect my 1280 and it won't load (albeit by a hp employee but not on behalf of hp)!  Has it been removed?
    So fed up of restarting my laptop & printer and adding and removing.  Updating Windows etc etc etc - spent £100 on hp  printer ink and can't get my A3 1280 printer to work with my all singing all dancing laptop!!!!
    Printer still works on my old dog of a PC but what use is that when I've retired the old dog!  
    Have spent sooooo many hours trying to resolve, and finally think I'm getting somewhere and stalls!!!  Grrrrrrrrrrrrrrrrrrrrrr 
    ONE VERY FRUSTRATED PUPPY!!!

  • Where can I get a Windows 7 64bit driver for my LaserJet CP1215?

    According to the product info, my LaserJet CP1215 is supported under Windows 7 64bit:
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c01539618&lc=en&dlc=en&cc=us&product=3422476#N10​...
    But the driver package available for download is the same whether I select 32- or 64 bit Windows 7.
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3422​...
    Needless to say, it is not working...although there are no error messages on installation or anything else. See http://h30434.www3.hp.com/t5/Home-Web-Printing/Las​erJet-CP1215-wont-print-gets-unspecified-error-on-​...
    So what do I do, to print to this printer on Windows 7 ??
    Help appreciated!

    I'm seeing different 32bit and 64bit packages.
    ftp://ftp.hp.com/pub/softlib/software10/COL22389/l​y-59012-2/ljcP1215-HB-pnp-win32-en.exe
    ftp://ftp.hp.com/pub/softlib/software10/COL22391/l​y-59118-2/ljcP1215-HB-pnp-win64-en.exe
    Suggest you try the latter link.
    Found the information here:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?lc=en&dlc=en&cc=us&lang=en&os=4063&product=34224​...
    You're lucky - HP didn't even bother to make a Windows 7 driver for my HP 1010.
    Cheers,
    Peter

  • NEED WINDOWS 2003 64BIT DRIVER FOR HP J3680

    need windows 2003 64 bit driver for hp j3680

    I would suggest trying the driver here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Qosmio F30: Need 64bit driver for RAID controller

    Can anyone help me???
    Please!
    I have Qosmio F-30.
    Where can i find 64-bit driver for raid controller?
    Is it exists somewhere?
    Please, help me!!!

    Unfortunately, the XP 64bit drivers are very rare and on the Toshiba driver page you will not find any.
    Possibly because Toshiba does not deliverer any notebooks with OS XP 64bit.
    See only one way to find one; google for 64 bit DAID driver and maybe you are successful
    Good luck

  • Windows 7 in OS printer driver for Deskjet 6840 not printing properly

    The Windows 7 (32 bit) in OS print driver for the Deskjet 6840 produces print in "Normal" mode that is blurred (not properly registered left to right and slightly vertically). When printing in "Draft" mode it is apparent that the driver is not setting the left and right margins correctly, so that each line is alternately shifted left or right on the page. If I switch to a 500C driver, the printer works fine (but of course high res images do not print properly). This is occuring on two wired network computers, both running clean installs of Windows 7 professional with all current updates including Service Pack 1. Microsoft says, "It's a HP printer, it's their problem". I'm just looking for an answer. Anyone have experience with this?

    Hello Bhl3302,
    Thanks for posting at NI forums! I think you should follow RavensFan advice on contacting the vendor for information on the driver’s support, or if you have a readme file, you could check on that. Also, are the Windows XP and Windows sharing the same architecture (32 or 64 bits)? Maybe the driver is not compatible with one of them, in case it changed. I did a quick search on the error message you're getting, and I found this forum in which they give some steps you could follow regarding the INF file. For instance, in one of the comments, they say they had a similar issue with another device and they found some work arounds. 
    Best Regards,
    Alina M

  • Windows 8.1 64-bit driver for Coprocessor on Mid 2009 Macbook Pro 5,4

    I have successfully installed Windows 8.1 Pro 64-bit onto my Mid 2009 Macbook Pro 5,4. The installer from BootCamp 5.0.533.5033 would not run, but I installed one-by-one the files under Apple and then ran the 64-bit nVidia installlers.  I have everything present and accounted for except for the 'Coprocessor.' 
    I have looked through the forums and everything seems to indicated that if you install the nVidia drivers it will install the driver for this but it doesn't.  Any thoughts/suggestions/solutions?

    For anyone who will find this post in the future, the Device Manager indicates that the 'Device Instance Path' is
    pci co-processor pci\ven_10de&dev_0aa3&subsys_cb7910de&rev_b1\3&21436425&0&1d
    Searching for that online, it appears that this is the nVidia MCP79 Co processor System.
    This driver did not install with version 306.37 that came with the BootCamp drivers.  I downloaded the current version from nVidia of 334.89 and that didn't work either.  I searched online and found a driver for an Alienware 17x that uses the same co processor and ran the installer which extracted the files for the nVidia chipset v. 15.57 for 64-bit Windows 7 and Vista to c:\dell\drivers\R273039 and pointed the Device Manager to this folder and it was able to successfully install the driver software for the Management Controller (drivers are listed under the SMU folder for the "PCI\VEN_10DE&DEV_0AA3" device).
    NVIDIA nForce System Management Controller
    I then proceeded to use Double Driver to backup the drivers in use by the system so that if I install Windows 8 on future systems I can use this rather than the round-about way of getting the driver installed on the system.

  • Can't download new face recognition driver for Qosmio G50

    Hi!
    Can't download new face recognition driver for G50 hinted by TEMPRO.
    Possibly bad link: http://81.27.174.53/tedd-files2/0/fareg-20081009112217.zip

    hi TTG
    i got de message on ma TEMPRO and i clicked to dwnload..
    this software can be installed to these models which is having Windows Vista 32 Bit:-
    Tecra A10, Equium L350D, Satellite L300D, Satellite U400, Satellite Pro A300D, Qosmio F50, Satellite Pro L300D, Portege M800, Qosmio X300, Satellite P300D, Equium U400, Satellite Pro P300D, Satellite L350, Satellite Pro P300, Satellite Pro U400, Satellite L300, Satellite L350D, Equium L350, Satellite Pro L350, Equium A300D, Satellite Pro L300, Equium A300, Equium P300D, Satellite Pro S300, Satellite Pro A300, Tecra S10, Equium P300, Satellite A300D, Tecra M10, Satellite A300, Satellite P300, Equium L300, Qosmio G50

Maybe you are looking for