Windows vista with flex 2

I have problems to install flex 2 with windows vista.. it
stops when installing something in registry.. Have someone problems
installing?
I need a solution..
Many thanks.

I just checked on this because I've gotten a few messages
about this.
As I remember, you only need to tell the setup.exe installer
to run in compatibility mode (properties >> compatibility
>> compatibility for windows xp service pack 2).
Also in that same properties tab there is a check box under
the privilege level to Run as Administrator. Check that box. And as
far as I can tell thats the only box that needs to be checked once
the program is installed.
Hope this helps / clears up any confusion.

Similar Messages

I'm trying to install iCloud on my PC running Windows Vista with Service Pack 2 and I get a message that the set up program is not a valid win32 file.

I'm trying to install iCloud on my PC running Windows Vista with Service Pack 2 and I get a message that the set up program is not a valid win32 file. Can anyone help me with this?

What is the exact error message?

TS4463 I am using Windows Vista with Outlook 2007 and iCloud. Everything has been great until this morning. I'm suddenly getting the message "Set of folders cannot be opened. The information store could not be opened.

I am using Windows Vista with Outlook 2007 and iCloud. Everything has been great until this morning. I'm suddenly getting the message "Set of folders cannot be opened. The information store could not be opened. I tried running the repair utlity to repair the iCloud however I am still getting this error message.

I tried rebooting. It didn't change anything.

I just installed ITunes 11.0.4. I get the error message: "The Itunes Library cannot be saved. A folder was specified instead of a file." When I sign on next, it says the library can't be found. Running Windows Vista with Mcafe protection

I just installed ITunes 11.0.4. I get the error message: "The Itunes Library cannot be saved. A folder was specified instead of a file." When I sign on next, it says the library can't be found, and Itunes wont open. I'm running Windows Vista with Mcafe protection

Hi there Br0x,
You may want to try rebuilding the iTunes library as an initial troubleshooting step. Take a look at the article below for more information.
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/ht1451
-Griff W.

HT2729 I have tried everything to sync my ipad to windows vista with no luck Help pleasease

I have tried everything to sync itunes using my ipad to windows vista with no luck Please Help

If your MBP has a display device that is an AMD Radeon 6XXX model, then you may be suffering from a known issue with Thunderbolt displays discussed here 10.9.4 - Thunderbolt display for 6630M (Mini mid-2011) still broken and elsewhere.
You can see the device by choosing About this Mac, then clicking on the "More Info...." button.

Using windows vista with two users and I can only open books with adobe digital editions on one account?

using windows vista with two users and I can only open books with adobe digital edition

You must authorize the second computer with the same Adobe ID.
There are sometimes issues with this registration: if you have them ....
Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
Uninstalling and reinstalling does not help.
Unfortunately, it often then gives misleading error messages about what is wrong.
A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your (old) Adobe ID.

HT4759 I tried to download icloud for pc windows vista with 2.1.2. and when download was almost complete it said it belonged to another user unknown to me so I stopped the process how do I start over?

I tried to download icloud for pc windows vista with 2.1.2 and when it was downloading almost finished it said it belonged to an unknown to me user?

You need to explain that, before you finished downloading something said that it belonged to another user ?
What said that, can you post a screenshot?

I downloaded the iCloud app to my PC (Windows Vista with Service Pack 2). But now why I launch the aplication, i'm getting an arror message that says "Unable to launch app due to side-by-side comparison". What do I need to do?

I downloaded the iCloud app to my PC (Windows Vista with Service Pack 2). But when I try to launch the app from the start menu, I'm getting an error message that says "Unable to launch due to side-by-side configuration". What do I need to do?

Sounds like a Windows issue. Google the error message. There are several discussions on the Microsoft forums listed that may help.

EBS R12 on Windows Vista with 32 bit

Hi,
Does anybody have installed EBS R12 (32 bit) on Windows Vista with 32 bit successfully?
I am aware that with Windows Vista 64 bits EBS R12 for Windows does not work.
Thanks,

Hi Hussien,
Thanks for your reply. I will not buy any type of Windows Vista for this purpose. I will buy a desktop PC with Windows XP Professional (32-bit) and with 500 GB. The Oracle Installation Guide recommends about 233 GB (dosk space) for a fresh install with a Vision Demo database. Do you think 500GB is more than enough for the initial install? Does it matter which processor I buy (AMD or Intel)? Do have any recommendation as to what processor should I buy (E series or Q series for Intel processor)?
Thanks again in advance.

Problems dual booting Windows Vista with Oracle Enterprise Linux 4

I tried dual booting my sony laptop which came pre installed with windows Vista,After a successful installation,windows Vista boots fine,but Oracle enterprise linux just stops booting at this point " Starting Udev...................................................(OK)
Initializing hardware....Storage network"
It's posibly a hardware compatibility problem but I dont know why I get stuck at this point.Can anyone help please?

hi,
r u getting this error while installing oel or after installation?
which version of oel u r installing?
u may get this error probably due to hard disk (usually sata) compatility with linux.
--Regards
Xaheer

Itunes on Windows Vista with SATA Intel Raid Matrix, BLUE SCREEN!

If I wasn't an IT Administrator this problem could've really upset me. I might have perceived your software crashed my hard drives. At least I had the knowledge to know how to re-detect my raid array and get things going; but for a moment i was worried too.
Issue: I have the known problem between APPLE's QUICKTIME and how it negates disk issues with Windows Vista; specifically for those using a RAID ARRAY.
Immediately upon loading the itunes or quicktime program, I lock-up. I sometimes get a bluescreen sometimes it just locks up. I always get a warning about my RAID array when this happens; either having to power down and re-detect the members of the array or the manager says bad disk/write to one of the members.
I must power down and power-up to regain function to my computer.
Intel says this is an apple problem and this doesn't shock me; because Itunes/Quicktime has some interesting disk stuff.
Hello Jeffrey,
Thank you for contacting Intel(R) Technical Support.
We have seen this; however, the root cause of the issue is not our RAID controller or its driver. You need to contact the application developer for additional information and troubleshooting assistance.
*Please contact Apple* for technical assistance.*
Sincerely,
Carlos B.
Intel(R) Technical Support
My TICKET WITH INTEL
I have the known problem between Intel's RAID manager and Apple's Quicktime/Itunes. Immediately upon loading the itunes or quicktime program, I lock-up. I sometimes get a bluescreen sometimes it just locks up.
I must powerdown and power-up to regain function to my computer. All the message boards say install the latest version. The latest version is not supported by my chipset, so I'm stuck at version 7.
Customer_type: Corporate IT
Product: Intel(R) Matrix Storage Manager
Product_id: 2101
OS: Windows Vista* Home Premium, 32-bit version
Surveyoptin: Yes
IMSM_version: 7.0.0.1020 (Storage Console)
NonEnglishversion:
servicepack: Select Service Pack
Chipset: Intel Chipset 82801FR SATA RAID
Processor_type: Intel P4
Processor_speed: 2.8
Motherboard: Shuttle XPC
Overclocked: no
RAM: 1024 MB
SATA_devices: Shuttle XPC Barebones with two Seagate SATA 80gig HD running as a strpe.
Raid_type: Formatted
RAID_config: Stripe set with no parity, two drives; both 80 gigs.
Changes: None
Issue: I have the known problem between Intel's RAID manager and Apple's Quicktime/Itunes. Immediately upon loading the itunes or quicktime program, I lock-up. I sometimes get a bluescreen sometimes it just locks up.
I must power down and power-up to regain function to my computer.
I sent some inquiry to Intel regarding my RAID array and apples software. I hope apple considers their windows customers diligently; otherwise they will start to make the same arrogant mistakes other companies have made; like Microsoft.
Message was edited by: groovecowboy

Hey Jeffrey,
I would just like to report that I am NOT experiencing the problem you describe. With my configuration (some details below) I can play video podcasts and listen to music in iTunes; I do not get a blue screen. My only issue is choppiness in the video playback (occasional frames dropped / occasional lack of synchronization between audio & video).
- Intel D945GPM Desktop Board (945G chipset)
- Pentium 4 D920 CPU (2.8 GHz dual core)
- Intel Matrix Storage Manager (IMSM) 7.8.0.1012 (November 2007 version)
-> RAID 10 Array over 4 x 250 GB Seagate SATA/300 drives
- iTunes 7.5
- ATI Radeon X1300 Video Adapter
In reviewing your post I am unclear as to what motherboard / chipset you have; you've just shown the model number of the I/O controller (I believe). However, based on that number I believe you're probably running on a motherboard/chipset that has been de-supported by Intel. Hence, you're precluded from using the most recent versions of IMSM. (I have an older machine that has the Intel 875P chipset; I'm stuck running IMSM 5.5.0.1035 on it...)
Newer versions of IMSM support newer features in the latest chipsets and abandon older chipsets; I'm kind of sore at Intel with how quickly the obsoleted my older machine (I think it's only 4 years old).
Anyway, if there is a conflict between iTunes & IMSM, you're probably stuck trying to get it fixed from the Intel side of things. It's probably a flaw in iTunes - complex software - not running in the native Apple environment.

Stuck on Windows Vista with Lenovo G550?

Hi, I am experiencing a problem which is making me get really mad at Lenovo Customer Service and Microsoft at the same time. I am using a G550 with 1.8GHz Celeron CPU and 2GB DDR RAM with 250GB HDD and G4500 Graphics
Here my Problem:
I was quite happy when buying my laptop, and couldnt wait to install Windows 7 on it. As I did so, I figured out very soon that there are major issues with Windows 7 on my laptop, and I was not able to run any of my software. Games wouldnt run, the programs would crash and I felt fooled in a way. That was why I then thought of XP, which was a very simple OS, but at least would run all of my software on this Notebook that I had just bought. So I installed XP and I could not find all the drivers I needed, I was not able to run my WIreless LAN-Network and in total XP is a 9 year old piece of software, which has many security issues, and wont be suiting a new Laptop in this price category. I mean I spent some 500 dollars on this notebook, and then I end up running XP on it? No thanks!
So I moved to Vista, which was my last hope, and which would at least run my applications, not crash and updatable. And at least I could really use the ease of this notebook on Vista. But one thing that really makes me crazily mad is, that I happen to have the worst performance with Windows Vista. I run SP2, the start procress needs like 40seconds without logon. Another additional 20 seconds for loading all the autostart programs (which are just CA Anti Virus and the usual system stuff). Do I have to be stuck on Windows Vista forever? I am experiencing so many problems with this operating system, but somehow its just more convenient than old dusty XP and new crashy windows7. Is it really this bad, that after spending hundreds of dollars on a new laptop I have to stick ot vista, in order to stay up to date and use my old programs which windows 7 just wont run?
I think its bit of an Ironie that Microsoft does not solve their incompatibility issues with lenovo laptops, and that Lenovo does not care about the problems their customers experience.
I was very well surprised when I bought this notebook until I realized the problems like:
Disk turning on and off al the time
Incompatibility with Win7
Driver problems on old OS like XP
I think lenovo really ows us a statement, and Microsoft should really tell us what we are going to purchase before we buy it. Money doesnt grow on trees and I am not willing to spend a lot of money on OS and Notebooks that later wont run correctly.
Whats your opinion on this?
Mahdi
Solved!
Go to Solution.

Hi if you want to stay in vista...
Here you find some acceleration hints for vista ..
Vista Tune Up
if you running more XP based programs (esp.. games) why not choose XP ?
but thats your own choice ....
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

CR10 viewer : Error ODBC Access on Windows Vista with multi-JOIN

Post Author: Stephane
CA Forum: Data Connectivity and SQL
Hi all,
I've got an error using a report in CR10 viewer on Windows Vista + Access 2000 :
"Echec de l'ouverture d'un jeu de lignes. Détails : 4200:[Microsoft][Pilote ODBC Microsoft Access] Erreur de syntaxe dans la clause FROM."
wich can be translate :
"4200:[Microsoft][ODBC Microsoft Access Driver] Syntax error in FROM clause."
This error only appear on Vista + Access, not on Vista + SQL and not on XP + Access.
The SQL query of my report (see details below) contains lots of INNER JOIN and 2 LEFT OUTER JOIN. If I replace those 2 LEFT OUTER JOIN by 2 INNER JOIN, the reports displays (but is wrong).
Somebody knows this problem?
Thanks in advance for your help.
Stephane.
The SQL query below :
SELECT TblDataCurrentValue.`ValDtaId`, TblDataCurrentValue.`ValIdShape`, TblDataCurrentValue.`ValOk`, TblDataCurrentValue.`ValMain`, TblDataCurrentValue.`ValIndex`, TblDataCurrentValue.`ValValue`, TblDataCurrentValue.`ValValueId`, TblDataLinks.`LnkDtaIdPrimary`, TblDataValues.`ItmValue`, TblDataValues.`ItmColor`, TblData.`DtaLabel`, tblGraphs.`GId`, tblGraphs.`GName`, tblGraphs.`GRef`, TblShapesGraph.`ShTextShape`FROM ((((`TblDataCurrentValue` TblDataCurrentValue LEFT OUTER JOIN `TblDataValues` TblDataValues ON TblDataCurrentValue.`ValValueId` = TblDataValues.`ItmId` AND TblDataCurrentValue.`ValDtaId` = TblDataValues.`ItmDtaId`) INNER JOIN `TblData` TblData ON TblDataCurrentValue.`ValDtaId` = TblData.`DtaId`) INNER JOIN `tblGraphs` tblGraphs ON TblDataCurrentValue.`ValIdGraph` = tblGraphs.`GId`) INNER JOIN `TblShapesGraph` TblShapesGraph ON TblDataCurrentValue.`ValIdShape` = TblShapesGraph.`ShIdShape`) LEFT OUTER JOIN `TblDataLinks` TblDataLinks ON TblDataCurrentValue.`ValDtaId` = TblDataLinks.`LnkDtaId`WHERE TblDataCurrentValue.`ValOk` <> 0ORDER BY tblGraphs.`GId` ASC, TblDataCurrentValue.`ValIdShape` ASC

Moving back to the 10_2 instant client works. Not certain why there is an issue with the 11_2 client.

Windows Vista with Windows 7 Upgrade on Boot Camp 4.0.1. Is it possible??

Hello everyone,
I own a genuine full installation Windows Vista and a genuine upgrade to Windows 7. I'd like to install these ( i.e. install Vista and then upgrade to 7) on a MacBookPro running on OSX Lion 10.7.2 with Boot Camp 4.0.1. Is It possible???

Try the Bootcamp forum: http://discussions.apple.com/category.jspa?categoryID=237

How do I use Windows Vista with Lion?

Hi - I wonder if you can help. I want to use a copy of Windows Vista I have through Bootcamp but have recently upgraded to OS X Lion.
I understand Snow Leopard supported Vista and if I had installed Vista prior to upgrading it would continue to work even though I was running Lion - however having upgraded to Lion I now cannot install Vista thtough Bootcamp as the Windows Support Software for Lion only supports Windows 7 (and I don't want to spend the money for that!).
So my question is - can I reinstall Snow Leopard, install Vista on a Bootcamp partition and then reinstall Lion without having to pay for it again? Will reinstalling Snow Leopard destroy the Lion recovery partition? Or can I simply go back into the App Store and redownload Lion from my account as I have paid for it already and not having the recovery partition therefore doesn't matter?
Your help would be greatly appreciated.

You can also keep Lion and Lion Recovery by installing it to an external drive.
OS X Lion Install to Different Drive
You may also see this message, with workaround:
Lion + Bootcamp: disk cannot be used
Before upgrading to Lion, making a bootable clone would help avoid some problems.
Boot Camp 4.0 drivers are Windows 7 only.
I don't see that you can't just partition with BCA 4.01 and not install, then get out Vista (again?) and use your 10.6 DVD. You can still use Boot Camp 3.0->3.2.
Boot Camp 4 requires Windows 7 or later | MacFixIt - CNET Reviews
Boot Camp 4.0, OS X Lion: Frequently asked questions

Windows vista with flex 2

Similar Messages

Maybe you are looking for