Windows Vista won't let my Mac mini print

the problem is I have a PC running Vista with a usb printer attached to it, I have printer sharing turn on the firewall is disable. A Mac Mini (PPC, 10.4.11) it connects to the network wirelessly the firewall on it is disable too, I want the mini to use the PC's printer too. the PC is not being friendly I've tried every I know to get the printer working. I can see the PC from the Mini but it's grayed out, from the PC I can fully access the Mini. HELP what am I missing for the Mini to access the PC's printer.

Hi, might give a try with Bonjour for Windows...
http://www.apple.com/support/downloads/bonjourforwindows.html
I don't have Vista, but it sure made XP easier.

Similar Messages

  • Win7 install dvd won't start on mac mini

    I'm trying to install windows 7 on my mid 2007 mac mini (running snow leopard) in a bootcamp partition. I created the bootcamp partition (32GB) using bootcamp assistant (no problem there) and inserted the installation dvd, but once the mini reboots to start the installer I just get a black screen (symptoms very similar to those with the late 2006 iMac).
    I tried using both the 64 and 32bit version but no difference there.
    The win7 install DVD (bought, not downloaded) seems ok as installation as a virtual machine using vmware works.
    I'ld really much prefer running windows in a bootcamp partition than through virtualization, so any help would be much appreciated.
    Thanks in advance.

    If it won't start past the screen with the Apple logo in the center, there's something very badly wrong with your system. Try starting in safe mode (hold down the shift key at startup, starting when you hear the startup chime and letting go when you see the Apple logo). If it starts up fine then (keeping in mind it will take longer than normal to start up in this mode, so be patient), but the problem returns when you reboot normally, you have some incompatible third-party software installed. What that might be is hard to say.
    If safe mode doesn't work either, your system is probably badly corrupt. Try reinstalling. Hold down command-R at startup to enter recovery mode. Once you do that, go to Disk Utility and repair the hard drive. If problems are nonexistent or fixed, quit Disk Utility and then reinstall the system. (This will simply replace the existing system files, and should leave all your other stuff alone.) If problems cannot be fixed, report back for more instructions.

  • How to install windows xp on bootcamp on new Mac mini?

    How can i install windows xp on bootcamp on new Mac mini?
    I know that i should get an external usb optical drive, but buying such hardware for one use is a waste of money. Is there any other method?
    I currently own a MacBook white, and really like the configuration. I it possible to copy the image of bootcamp to new mac mini? If so, what will happen to hardware and drivers?

    Admiralali wrote:
    Let me get this right:
    1- copy the exact image of the winxp installation dc to USB
    2- start bootcamp assistant, go through everything, till rebooting
    3- boot from USB (hold ALT and select the USB volume)
    4- go through winxp setup and done!
    Am I missing anything?
    I think that USB would be readable only on Mac os or winxp, but will the winxp installer read from USB?
    Correct me if wrong.
    Having read further websites, I am now a bit more dubious you can do this, at least with an XP installer.
    However if you have a USB memory stick and an existing Windows computer (even a Boot Camp one) or can borrow one you could try using the free WinToFlash utility to make a supposedly bootable USB memory stick of the installer. See http://wintoflash.com/overview/en/
    The problem is XP predates EFI firmare and XP only really knows BIOS firmware. As such (supposedly) XP would have problems booting from a USB device fully - it might lose connection part way through. Windows Vista and 7 do support EFI firmware.
    The other approach I mentioned of temporarily moving the hard disk from the Mini to the MacBook so you can use the MacBook internal CD/DVD drive would work - be careful of the cables. Fortunately a new Mac mini and an old MacBook are two of the easier models to get at the hard disk. See http://www.ifixit.com/Guide/MacBook-Core-2-Duo-Hard-Drive-Replacement/514/1 (they also list other MacBook models) and http://www.ifixit.com/Guide/Installing-Mac-Mini-Mid-2011-Hard-Drive-Replacement/ 6422/1
    Regardless of which method you try, the first step would be on the Mac mini to run Boot Camp Assistant and to create the partition for Windows. Then via either method try booting from a Windows XP installer.
    As I have taken Macs apart many times, I personally might go the swapping the hard disk over route.

  • Can I install windows home server 2011 on a mac mini?

    Hey guys and girls...
    Can I install windows home server 2011 on a mac mini? If so how?

    WHS is 64-bit. Genius are really not versed in Boot Camp or Windows, let alone anything not on the "approved" list of Windows versions.
    Most of the problems are with burning ISO, or the SuperDrive. It should have seen the NTFS partition. Disk Utility is known to be trouble, burning it on your Mac Mine but iwth Windows 7....?
    Seeing you have Windows 7, format the partition to NTFS 160GB you want and then exit and boot WHS installer.
    Or run the install from Windows 7.
    In past, WHS supported TimeMachine, streaming video, supported iTunes (that was broken/disabled it seems by Apple with 10.0), as well as even SuperDuper backups.
    Main idea is to have some network attached drives.
    Netgear ReadyNAS Ultra2 Review
    Newegg - HP StorageWorks X310 Windows Home Server
    I have both a ISO and Burned it to a dvd useing windows 7 built in ISO burning software, Its a 64 bit copy (got from microsoft download website from my dads microsoft account).
    It is enouth for the OS but it runs slowish on the mac mini (latest core 2 duo 2.4ghz model) The Idea was to have it backup my pc and laptop to a usb drive and act as a media centre pc (connected to av receaver and tv and on a gigabit network with a 2TB nas)
    Since it looks like this may not work, whats the best way to make it into a media centure? mac osx? windows 7? plex? whats best and good?
    I'd avoid USB like the plague. Why not use your PC instead? If I was going to use a Mini for WHS, I'd just use the Mini solely for Windows and not have OS X (you can boot OS X off an external drive anyway).

  • Trying to install windows 7 64 bit on a mac mini

    I'm trying to install windows 7 64 bit on a mac mini, via boot camp. Install hangs at about 10% while files are being loaded from windows disc. I'm using an LG USB 2.0 Super-Multi DVD Burner. What's the fix for this.

    Check this out: Boot Camp- Macs that work with 64-bit editions of Microsoft Windows Vista and Windows 7

  • HT4484 when i go to update apps the previous owners apple id is stuck in the id box and it won't let me put mine in.. PLEASE HELP! LOL

    when i go to update apps the previous owners apple id is stuck in the id box and it won't let me put mine in.. PLEASE HELP! LOL

    Apple says that the Mac was supposed to be erased and taken back to the most recent version of OS X with which it shipped. You should not have any of the previous owner's apps. That violates the Terms of Use for Mac App Store apps.
    https://discussions.apple.com/message/25127788#25127788

  • Windows Vista won't support my M

    Sorry - me again. I have a Creative Zen 20mg and Windows Vista won't load the CD. I then looked for various download options online and have been told that they won't work with Vista and Creative have no plans to change this. I need to upload my music to the PC! Is there any way that I can sort this some other way? I've seen from the other threads that there aren't drivers available. ?Many thanks.Message Edited by Ellymoo on 03-02-20080:57 AM

    There are several components you would need to install for access to the player. ALL must be installed in Compatabilty mode for XP. In addition to the one you listed The Creative Nomad Jukebox plug-in is one of the components that needs to be installed if you have not. The version number is 2.00.20. http://support.creative.com/downloads/download.aspx?nDownloadId=9320 The other component after that one is the Creative Nomad Explorer version 3.0.0http://support.creative.com/download...ownloadId=8069

  • Desktop PC with Windows Vista won't boot up

    My Acer Aspire 180 Desktop PC  with Windows Vista won't boot up and has a Recovery error message that says it shut down unsuccessfully. Can someone help me with this issue?

    If you have Recovery Disk then try to repair install. If you do not have then you have to contact Acer Support for getting them.
    Once it is recovered you must update the Graphic Card Driver. Visit the website of the Graphic Card manufacturer to update it.
    S.Sengupta, Windows Experience MVP

  • Install Windows 7 on a Mid 2010 Mac mini using USB or SD media?

    Is is possible to install Windows 7 on a Mid 2010 Mac mini using USB or SD media?  I have not figured this out.  Here's what I have observed:
    I can install OS X Lion using USB or SD media. Both are detected in the boot menu, and will boot.
    An SD card with Windows 7 installation files formatted MBR/FAT32 using diskpart appears (with an SD card icon) in the boot menu but when selected as a boot device, the boot fails and the existing OS X instance on the Macintosh HD starts.  A USB stick formatted as described does not appear in th boot menu at all.
    An SD card or a USB stick formatted as described will boot on a Mid 2011 MacBook Air, and can be used to install Windows 7.
    Is this due to EFI differences between a Mid 2010 Mac mini and a Mid 2011 MacBook Air?
    Thanks.

    The Mac Mini Mid 2010 has a DVD player built in, you can startup and install from a Windows 7 DVD. The Mac Mini Mid 2011 does not have a DVD player built in. I am happy that in new computers I can make use of an USB-stick to install Windows 7. Windows 7 uses MBR and Mac OS X uses EFI and that is why it was not possible on a Mac Mini Mid 2010. I think the EFI on a Mac Mini Mid 2011 is different.
    I should like a firmware update on my Mac Mini Mid 2010 if possible. In that case I could choose between DVD or USB stick if I want to install Windows 7.
    I also have a FireWire CF Card Reader. I think it is not possible to install Windows 7 via FireWire too.
    I do have an external USB HD with 2 partitions: Mac OS X 10.6.8 and Windows 7, but is is not possible to start up Windows 7 from the external HD.  It is possible to start up Mac OS X 10.6.8 from the external HD on a Mac Mini Mid 2010.

  • IPad Mini Won't Sync With Mac Mini (ios 8.1 OSX 10.6.8)

    Problem : IPad Mini connects to iTunes OK, can be seen in iTunes and I can select which movies to sync to it etc.  When I hit the "apply" button after making a change (ie deleting or adding a movie) the sync lasts just a second then the "sync" button remains greyed out, and I can't make them sync.
    IPad Mini ios 8.1 Mac Mini OSX 10.6.8 (latest available version for my mac mini)

    I do not care who you are, I have more than once been interfered with, this is my home, you do not have the power to steal my network speed every day, I have a complaint you
    发自我的 iPhone
    在 2014年11月7日，下午4:32，Apple Support Communities Updates <[email protected]> 写道：
    Apple Support Communities
    selenafromshenzhen has posted in the Using iPad community.
    IPad Mini Won't Sync With Mac Mini (ios 8.1 OSX 10.6.8)
    You're supposed to download the latest iTunes from Apple official site and install it on your Mac.
    To post a reply, go to the discussion in Apple Support Communities.                                                             
    You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
    TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
    All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

  • I have just switched from windows and bought myself a new mac mini, only had it a few weeks and already getting message not enough free space. Help, surely cant be out of space already

    I have just switched from windows and bought myself a new mac mini, only had it a few weeks and already getting message not enough free space. Help, surely cant be out of space already

    It sounds unlikely of course. But from your question it's hard to tell what might have filled your HDD. Are you constantly on file sharing or has filled the drive with movies?
    Best way to tell is to start checking what folders occupy space. "Get Info" for the HDD and its subfolders is a way to start checking where the data in question resides.
    And as BGreg say, call Apple support is also a good way to begin with.

  • After attempt to install windows 7 via boot camp onto Mac mini, my screen reads "no bootable devise--insert boot devise and press any key.  However, disk still in reader, and not using a Mac keyboard

    After attempt to install windows 7 via boot camp onto Mac mini, my screen reads "no bootable devise--insert boot devise and press any key.  However, disk still in reader, and not using a Mac keyboard

    Reboot your Mac, as soon as you hear the chime press the option/alt key and hold it until the boot manager appears, select OSX to boot from.

  • Windows Vista won't install Ipod

    Latest version of Itunes 7.4.2 has been installed, unfortunately Windows Vista has located Ipod mini in "other devices" in "Device Manager", but it won't install the Ipod. I've reinstalled Iteune three times and searched the Windows Vista disk, but with no luck.
    I'm on the verge of selling the ipod - any advice would be welcome.
    Thanks

    I suggest either getting a Mac or going back to Windows XP because Vista is known to have these problems.

  • Windows Vista won't boot in Snow Leopard

    Hi everyone
    I tried to boot into my Windows Vista Boot Camp partition today and it wouldn't start. After holding down the option key like usual, it just sat there with a white screen. No Apple logo. No partitions to click on like usual. Then my Mac ran incredibly slow and was glitchy. What happened to Windows? Please help.
    All responses welcome and appreciated.
    Thanks.
    macdiscuss

    You're very welcome.
    I always leave the boot order BIOS setting to boot from the HDD first so as to shave off a few microseconds from the boot time. 
    When I need to boot from another device such as a DVD in your case, I turn on the PC, at the beginning of the HP welcome screen, I tap the F9 key to get the one-time boot menu.
    I select the DVD drive from the list. Then I hit the button on the drive to open the drive, pop the bootable DVD in, close the tray, wait a second or so and then hit the enter key.
    After I hit the enter key, watch the sreen for a message that states in substance...attempting to boot from DVD...press any key to boot from DVD...
    I press any key and the PC boots from the DVD and off I go...
    Looking forward to hearing back from you.
    Now remember...making that file is pretty easy, but only if you read both my notes and the guy that wrote the procedure's steps carefully.
    There have been a few forum members that I have had to coach during the process, because they were following that guy's every step to the letter, and as I pointed out, there is only one mistake on his first screen shot...but that one mistake is all it takes to stop you cold.
    Disregard the part of the text under the first screen shot about "extract the files to the Vista folder."
    The files were already extracted to that Vista folder when you ran the X14.exe file by reading the text on top of the first screen shot.
    You get past that, and you're home free.
    Good luck!

  • Windows Vista won't install

    Hey i just got a copy of windows vista but it won't install. i tried to install it using bootcamp but it asks me to start installing on a existing windows. i don't have any windows installed on my mac book. Do i have to install windows xp before installing windows vista?

    Moncrief wrote:
    Thanks nerowolfe.
    I'll start doing my homework.
    The obvious: Is vista proving stable on the Mac built in drive?
    While some might consider me "lucky," I don't believe i luck. I have had no problems with any of my three Macs which now all run Leopard. My two MBPs were updated, not even an archive and install and they both run fine, as does my old G5.
    I installed XP-Pro on my 32-bit MBP when I first got it using BootCamp1.0, beta.
    I installed Vista Ult 64-bit on his MBP also under a beta version of BC, 1.2, I believe.
    All the Leopards are up to date, as are my Winders OSs. I finished updating this MBP to SP1 this morning. I have never had any problem, issue or anything I would consider serious. I did have the problem some have noted with Leopard, that the WiFI modem would turn off when not used, but that was not a Leopard issue, it was a firmware issue with my Westell modem, which works fine now that I upgraded its firmware.
    As of now, I have nothing but praise for both Apple and, yes, Microsoft.
    I learned long ago, that when you get down the the processor, it's all the same 1's and 0's
    I do research things quite well before actually committing myself, but that should be normal for everyone. Even a daredevil driver or stuntman carefully plans what he does, although it looks as if it's spontaneous.
    I use computers for business and pleasure and I need them as tools. I do not fool around with strange software or unplanned updates. So far, that has paid off.

Maybe you are looking for