Windows Vista x64 - Service Pack 2 - Premiere
VISTA SP2 WARNING..
However, I installed SP2 last night and for whatever reason Premiere exits and closes it self out after about 20 seconds of LOADING on the screen.
Just uninstalled SP2 and Premiere now works again..Whew!
For whatever reason it could just be my install-all other adobe apps worked under SP2, just premiere would shutdown/close itself out when "LOADING..." appeared from either a new project or old project.
I also did the preference file fix to no avail.
Just to reactivate this item now - Vista SP2 is now in release status. I do not believe there are any restrictions on downloading and installing it.
Is an update to Premier needed for this? I tried the beta and had to back off of it because of this problem so I am very interested if there is still an issue before install this.
Similar Messages
-
I'm trying to install iCloud on my PC running Windows Vista with Service Pack 2 and I get a message that the set up program is not a valid win32 file. Can anyone help me with this?
What is the exact error message?
-
I downloaded the iCloud app to my PC (Windows Vista with Service Pack 2). But when I try to launch the app from the start menu, I'm getting an error message that says "Unable to launch due to side-by-side configuration". What do I need to do?
Sounds like a Windows issue. Google the error message. There are several discussions on the Microsoft forums listed that may help.
-
iCloud says "you can't sing in because of a server error" running Windows Vista x32 service pack 2. Can't set it up on my PC any ideas?
I have used the solution below to fix mine and others that have run into this issue.
Start --> Programs --> Accessories (Right Click on Command Prompt) --> Run as Administrator
then type in: "Netsh winsock reset" (-without the quotes-)
Hit enter, restart PC, iCloud For PC should now connect without any server errors
(This solutions will work in some instances when trying to fix errors associated when you are unable to connect to iTunes also.) -
Can I sync my iPad using Windows Vista with Service Pack 2?
anyone know?
See System Requirements:
*PC requirements*
PC with USB 2.0 port
Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 9.1 or later (free download)
iTunes Store account
Internet access -
What Photo Shop version may work with Windows Vista Home Premium (x64) Service Pack 2?
What Photo Shop version may work with Windows Vista Home Premium (x64) Service Pack 2?
For the IQ700 series
If you're running Windows Vista SP2, there is a patch for USB patch for NVIDIA chipsets
http://support.microsoft.com/kb/975163/
If you're running Windows 7, install this patch
http://h30434.www3.hp.com/t5/Lockups-Freezes-Hangs/Driver-update-for-Win7-USB-issue-on-nVidia-chipse...
And only use the driver from the system manufacturer's website or Windows Update. Do not use the latest drivers from NVIDIA's website for the IQ700 series -
USMT restore from Windows XP sp3 x86 to Vista x86 service pack 1 - USMT error code 36
Hi
We have been unable to restore user profile from Windows XP sp3 x86 to Vista x86 service pack 1 using USMT .
we keep receiving errors, see log below.
We have taken the backup from the windows xp several times, and Googled high and low for an answer - cannot get it to work.
We have used this sane command method on several windows xp to windows 7 migrations , without any issues.
please help
2014-06-11 14:50:18, Info [0x000000] LOADSTATE.EXE Version 6.2.9200.16384[gle=0x000000b7]
2014-06-11 14:50:18, Info [0x000000] USMT Started at 2014/06/11:14:50:18.626
2014-06-11 14:50:18, Info [0x000000] Command line: loadstate
\\backup\Profiles\Migration\Paul G /i:\\backup\Profiles\Migration\Paul G\migapp.xml /i:\\backup\Profiles\Migration\Paul G\miguser.xml /ue:*\* /ui:UNSWORTH\paulg /lac /lae /progress:C:\Users\ADMINI~1\AppData\Local\Temp\USMTprog.log
/l:C:\Users\ADMINI~1\AppData\Local\Temp\USMTload.log
2014-06-11 14:50:18, Error [0x000000] Only Windows 7 and Windows 8 are supported as destinations.[gle=0x000000cb]
2014-06-11 14:50:18, Info [0x000000] Unsupported OS Version: 6.0.6001.Service Pack 1[gle=0x000000cb]
2014-06-11 14:50:18, Info [0x000000] Failed.[gle=0x000000cb]
2014-06-11 14:50:18, Info [0x000000] Compliance check failure; please check the logs for details[gle=0x000000cb]
2014-06-11 14:50:18, Info [0x000000] USMT Completed at 2014/06/11:14:50:18.628[gle=0x000000cb]
2014-06-11 14:50:18, Info [0x000000] ----------------------------------- USMT ERROR SUMMARY -----------------------------------[gle=0x000000cb]
2014-06-11 14:50:18, Info [0x000000] * USMT error code 36: [gle=0x000000cb]
2014-06-11 14:50:18, Info [0x000000] +-----------------------------------------------------------------------------------------[gle=0x000000cb]
2014-06-11 14:50:18, Info [0x000000] | Compliance check failure; please check the logs for details[gle=0x000000cb]
2014-06-11 14:50:18, Info [0x000000] +-----------------------------------------------------------------------------------------[gle=0x000000cb]We are using
USMTGUI 5.0.3, which I understand uses latest version of windows USMT ( 6.3) .
When I try using USMT 6.2 from AIKTOOLS to restore the profile using this command , i get a different error. I have even tried adding /hardlink /nocompress and restoring profile from portable hard drive instead of NAS, and getting a different
error;
2014-06-12 11:53:21, Info [0x000000] USMT Started at 2014/06/12:11:53:21.897
2014-06-12 11:53:21, Info [0x000000] Command line: loadstate E:\conference-pc /i:E:\conference-pc\migapp.xml /i:E:\conference-pc\miguser.xml /ue:*\* /ui:UNSWORTH\administrator /lac /lae /progress:C:\Users\ADMINI~1\AppData\Local\Temp\USMTprog.log /l:C:\Users\ADMINI~1\AppData\Local\Temp\USMTload.log /hardlink /nocompress
2014-06-12 11:53:21, Info [0x000000] Script file specified: E:\conference-pc\migapp.xml[gle=0x000000cb]
2014-06-12 11:53:21, Info [0x000000] Script file specified: E:\conference-pc\miguser.xml[gle=0x000000cb]
2014-06-12 11:53:21, Info [0x000000] Starting the migration process[gle=0x000000cb]
2014-06-12 11:53:22, Warning [0x080462] CListSysFileFilter::BuildTree: could not create FileList object for Z:\SFLISTLH.DAT: Win32Exception: \\?\Z:\SFLISTLH.DAT: The system cannot find the file specified. [0x00000002] __thiscall UnBCL::FileStream::FileStream(const class UnBCL::String *,enum UnBCL::FileMode,enum UnBCL::FileAccess,enum UnBCL::FileShare,unsigned long)
2014-06-12 11:53:24, Info [0x000000] System information:
Computer name: WIN-4Q9K3THYGWW
Machine SID: S-1-5-21-1202719645-4168933617-2382629769
OS version: 6.0.6002.Service Pack 2
Language: en-US
Architecture: 32-bit
Drives:
C: Type: Fixed, Bus type: ATA, Hotplug: No
D: Type: CD/DVD
E: Type: Fixed, Bus type: USB, Hotplug: Yes
Z: Type: Remote
F: Type: CD/DVD
Users:
WIN-4Q9K3THYGWW\Guest, administrator: No, interactive: Yes, logged on: No, has profile: No
UNSWORTH\administrator, administrator: Yes, interactive: Yes, logged on: Yes, has profile: Yes
WIN-4Q9K3THYGWW\Administrator, administrator: Yes, interactive: Yes, logged on: No, has profile: Yes
2014-06-12 11:53:24, Info [0x000000] Processing the settings store
2014-06-12 11:53:24, Error [0x080000] HARDLINK: cannot find distributed store for c - 14f873cb-57a5-48c7-90d9-5d001c5625b6[gle=0x00000002]
2014-06-12 11:53:24, Error [0x0802e3] SelectTransport: OpenDevice failed with Exception: Win32Exception: HARDLINK: cannot find all distributed stores.: There are no more files. [0x00000012] void __thiscall Mig::CMediaManager::SelectTransportInternal(int,unsigned int,struct Mig::IDeviceInitializationData *,int,int,int,__w64 unsigned long,class Mig::CDeviceProgressAdapter *)
void __thiscall Mig::CHardLinkHelper::Open(class UnBCL::String *)[gle=0x00000002]
2014-06-12 11:53:24, Error [0x000000] Unable to open store at E:\conference-pc\USMT[gle=0x00000002]
2014-06-12 11:53:24, Error [0x000000] Failed to select store. Path: E:\conference-pc[gle=0x00000002]
2014-06-12 11:53:24, Warning [0x000000] Internal error 23 was translated to a default error
2014-06-12 11:53:24, Info [0x000000] Failed.[gle=0x00000091]
2014-06-12 11:53:24, Info [0x000000] An error occurred during store access[gle=0x00000091]
2014-06-12 11:53:24, Info [0x000000] USMT Completed at 2014/06/12:11:53:24.718[gle=0x00000091] -
Can't launch Cisco Configuration Professional on Windows Vista x64
The Help is necessary to resole the issue (see subject).
Tech enveronment
Windows Vista x64
Adobe Reader X ver. 10.1.0 (Russian)
Cisco Configuration Professional 2.5
JRE 6 update 27
JRE 6 update 27 (64-bit)
Internet Explorer 9.0.8112.16421IS
While launch CCP popup the message box :
"Unable to read the resource file. The file could be corrupted. Please re-install Cisco Configuration Professional to resolve the issue."
Ones (never popup after) Popup the message box (InstallShield Wizard):
Adode Reader is not present on the PC. It is required to view the PDF file.
Also the message box InstallShield Wizard:
Internet Explorer with javaplug-in version 1.6.0_11 Cheked
Adobe Flash Player version 10 Cheked
Memory 1 Gb Cheked
Screen Resolution 1024x768 Cheked
Cuted _cpinstaller_004.log file:
Product : Cisco Configuration Professional version 1.0
10-4-2011 16:48:31 LOG : Command line options =
10-4-2011 16:48:31 LOG : GetOS: OS Windows Vista
10-4-2011 16:48:31 LOG : GetOSServicePack: service pack 2
10-4-2011 16:48:31 LOG : GetIEVersion: IE version 9.0.8112.16421
10-4-2011 16:52:51 LOG : CheckCCPPorts: WARNING 80 is not a registered HTTP port
10-4-2011 16:53:27 ERROR : SetRunAsAdmin: ERROR REG_APP_COMBAT_LAYERS_ROOT could not be created.
10-4-2011 16:53:46 LOG : GetJavaIEPluginVersion: java IE plugin version 1.6.0_27
10-4-2011 16:53:47 LOG : GetFlashPlayerVersion: flash player version 10
10-4-2011 16:53:47 LOG : GetScreenResolution: screen resolution 8
10-4-2011 16:54:14 LOG : OpenPDFFile: Adobe reader could not be found on system.
10-4-2011 16:56:17 LOG : OnEnd: installation successfully completed.Hi,ngoldwat!
Yes, off cource, I've tried to launch CCP with Administartor rights - no success.
I have re-installed CCP under Local Admin and launched it. Great!!! It works! But, one of but, the app does not launch from domain user while I use Run as Administrator. I think the issue in the permission and/or user's profile.
Thanks ngoldwat! You have helped me. -
ORADC problem on Windows 2000 with Service pack 1 and service pack 2
Hi,
I have a VB application running on NT4.0 workstations. It uses
ORADC control to talk to ORACLE 7.3 When I load it on Windows
2000 with service pack 1 or service pack 2, I encounter some
problems.
The ORADC control is used in most of the VB forms and the
Refresh method of the ORADC conrol is used to refresh the APEX
TRUE DBGRID PRO control. When this action is executed, I receive
a run time error
"Method Refresh of object '_DORADC' failed Err#: -2147417848
It works fine when no service pack is applied on Win2K.
Can anyone tell me what's going on?
Thankssatheesh_p wrote:
Thanks for your reply.
When I checked the system requirements. I couldn't find information on windows 2003 service pack 2
link http://www.adobe.com/products/coldfusion/systemreqs/.
Whether your OS is windows 2003 with service pack 2?
Are you sure coldfusion 8 will work on windows 2003 with service pack 2?
Regards,
Satheesh.
Well it was there, if you understand the naming properly:
ColdFusion 8 system requirements
Windows
Intel® Pentium® II or AMD Athlon processor
Microsoft®
Windows® 2000 Professional with Service Pack 3; Windows 2000 Server,
Advanced Server, or Datacenter Server with Service Pack 3; Windows
Server® 2003 Web, Standard, or Enterprise Edition with Service Pack 1
and R2; Windows Server® 2008; Windows XP Professional or Home Edition;
or Windows Vista®
R2 is the "offical" Microsoft name for service pack 2. -
Forms 10g Installation issue on windows 7 Professional service pack 1
hi
I am trying to install oracle forms 10g 64 bit windows 7 Professional service pack 1 ..
Below are 2 files that i am using ..
ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
But it failed but the error is ..
Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2. Actual 6.1 Failed <<<<
just wondering if there are any workaround ..Christian is right - Forms 10g R2 (version 10.1.2.0.2) is not certified for installation on Windows 7. You must apply a Forms 10g R2 patch to bring the version to 10.1.2.3.0 for it to be certified. You must have a My Oracle Support account to obtain the patch.
Now, to your question - is there a workaround; the answer is yes. There are known issues with this installer. I'll list them and their workaround.
1. The Oracle installer checks for a specific set of Windows versions rather than check for a minimum Windows version.
Workaround: Right-click the Installer and select Properties. Click the Compatibility tab and click the checkbox: Run this program in compatibility mode for: Windows XP SP3).
2. The Oracle Installer can't detect Windows Managed Virtual Memory (VM).
Workaround: You must temporarily change the Virtual Memory settings and specify specific Initial and Maximum sizes. See this Microsoft article for more information on changing VM settings. http://windows.microsoft.com/en-us/windows-vista/change-the-size-of-virtual-memory
This change will require you to restart your computer. After you have successfully installed Oracle Forms 10g, you can restore the original VM settings.
3. The Oracle installer MUST be installed as an "Administrator".
Workaround: Windows 7 uses "Least privileged user" so you must right-click the Installer and select the Compatibility tab. Click the "Run this program as an administrator" checkbox.
4. Not a Oracle installer issue, but you will have to install the 32-bit version of the Oracle Java Runtime Environment (JRE) (1.6.0 - not 1.7.0) because Oracle Forms is a 32-bit application so it will not be able to use the 64-bit JRE.
Run the Oracle installer and it should now install succesfully.
Craig... -
Problems Installing CS3 Web Premium on Windows Vista x64
I was (key word) having problems with my installation of CS3 on my brand new (3 days old) computer with Windows Vista x64. Finally after two days of installing and uninstalling, I called Adobe support. I was pleasantly surprised with how quickly they solved my problem (if only I had called sooner).
Having worked on this for 2 days I have seen and tried everything except of course the cure. So I wanted to put this out there for any one else that is having problems.
The symptoms:
- Everything seemed to install correctly (except acrobat which is another story. you can find lots of post about that.). No errors during installation. And when it finally completed installing, all that was left was to click "finish" which indicated to me that installation was successful.
- Open Photoshop. PS would open and immediately stop working. Vista said it was not responding.
- Open any of the other programs and the little vista circle would spin for 5 to 10 seconds then nothing. Program did not start to open. Just nothing.
The problem: Unbeknown to me (never saw an error message) "Licensing for this product had stopped working". When I described above symptoms tech support went straight to this.
The solution: Download the Licensing Service Update and run it. http://kb.adobe.com/selfservice/viewContent.do?externalId=kb401528
Once I ran this, Photoshop opened and let me enter serial number and activate CS3.
If after your installation, Photoshop or any of the other programs seem to get stuck or you never get the dialog box to enter serial number, the Licensing Service Update should fix things for you.wow...thank you so much for this posting. I just got home & followed your steps and now I have CS3 up & running. After 4 days of stressing out, finally someone was able to assist. Why can't the Adobe Experts & Employees on these forums supply this much needed information?????
I seriously understand why people want to get crack versions of this software rather than paying hundreds of dollars like us and avoid all this BS and get no support whatsoever!
Thank you again!! -
I am trying to update iTunes on my desktop (running Windows XP Professional Service Pack 3) and I continue to receive an error message stating that the update cannot continue because Bonjour and Quicktime are older versions and to contact technical support. I have tried repairing both and tried to uninstall iTunes and all of it's componants and still receive the same message. Any help getting this issue resolved as soon as possible will be much appreciated.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
Next, select any QuickTime entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
To Be Filled By O.E.M. To Be Filled By O.E.M.
iTunes 11.0.0.163
QuickTime 7.1
FairPlay 2.2.32
Apple Application Support 2.3.2
iPod 更新程序库 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.1.3
Apple Mobile Device Driver 1.63.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote 提交“1.9.6.143”
Gracenote DSP 1.9.6.45
iTunes 序列号 0012B96815A8CF58
当前用户是管理员。
当前的本地日期与时间是：2002-01-17 20:57:39。
iTunes 并未在安全模式下运行。
WebKit 加速合成已启用。
不支持 HDCP。
支持 Core Media。
视频显示信息
NVIDIA GeForce 6150SE nForce 430
**** 外部插件信息 ****
尚未安装外置插件。
**** 网络连接测试 ****
网络适配器信息
适配器名称： {E6238474-0F0E-4882-A736-658EEE96DF63}
描述： Realtek RTL8102E/RTL8103E Family PCI-E Fast Ethernet NIC - 数据包计划程序微型端口
IP 地址： 192.168.1.100
子网掩码： 255.255.255.0
默认网关： 192.168.1.1
DHCP 已启用： 是
DHCP 服务器： 192.168.1.1
获得租约的时间： Thu Jan 17 20:07:17 2002
租约到期时间： Thu Jan 17 22:07:17 2002
DNS 服务器： 222.88.88.88
222.85.85.85
活动的连接： LAN 连接
已连接： 是
在线： 是
使用调制解调器： 否
使用 LAN： 是
使用代理： 否
防火墙信息
成功连接到 Apple 网站。
连接失败，无法浏览 iTunes Store。
发生未知错误（0x800B0101）。
连接失败，无法从 iTunes Store 购物。
发生未知错误（0x800B0101）。
无法连接到 iPhone 激活服务器。
发生未知错误（0x800B0101）。
无法连接到固件更新服务器。
发生未知错误（0x800B0101）。
成功连接到 Gracenote 服务器。
上次成功访问 iTunes Store 是在：2013-01-04 12:38:48。
这台电脑上的日期与时间的设置不正确。与 iTunes Store 的安全连接可能会失败。
**** CD/DVD 驱动器测试 ****
“LowerFilters”中没有驱动程序。
UpperFilters: GEARAspiWDM (2.2.3.0),
G: ASUS DVD-E818A4, Rev 1.00
驱动器是空的。
**** 设备连通性测试 ****
iPodService 11.0.0.163当前正在运行。
iTunesHelper 11.0.0.163当前正在运行。
Apple Mobile Device service 3.3.0.0当前正在运行。
通用串行总线控制器：
Standard OpenHCD USB Host Controller. 设备工作正常。
Standard Enhanced PCI to USB Host Controller. 设备工作正常。
找不到 FireWire (IEEE 1394) 主机控制器。
已连接的设备的信息：
小C, iPhone 4 (GSM)正在运行固件版本 6.0.1
序列号： DX6JLS8HDP0N
**** 设备同步测试 ****
成功完成同步测试。i cant access to itunes store
Can you walk us through what happens when you try to connect to the Store, please? -
Just bought a new ipod touch for my daughter. It won't sync without itunes 10.5.2 loaded on our computer (a 2005 HP with Windows XP and service pack 2.) When I've tried to load 10.5.2, I get an error message box stating there is a problem with my Windows installer. I've tried loading the windows installer hot fix KB942288-v3-x86, but it didn't help. Any suggestion?
Hi Lorheak,
thanks for the quick reply. I had the same idea already yesterday. I use Norton Internet Security for a long time now without any problems. I think this a Apple or Microsoft problem, because the popup window which appear come from Windows DEP. I got no message from the firewall with any problem. I check the log files from Norton and Windows already but find nothing. This is a very strange problem. In the past I have had a lot of other problems with iTunes upgrades. Everytime I accept the installation of the newest version I got errors regarding missing "msi" files.
Greetings Gert -
Daqmx 9.02 on windows vista x64
I tried to install the latest daqmx drivers but it gave me a bunch of errors while installing NI-VISA and a bunch of other products. Eventually it finished installation but now nidevmon.exe does not start.
Here's what I'm trying to do:
I already have Labview 8.6 with daqmx 8.7 installed. I upgraded my application to Labview 2009 with daqmx 9.02 on another machine. Now I want to transfer that application to this Vista x64 computer. I also want to be able to run the older application (built using 8.6). I was hoping I could install 32-bit version of Labview 2009 along with the latest version daqmx and visa and then the upgraded application will work. Is it possible that the installation files were just corrupted? Can I install 32-bit daqmx on x64 vista? I don't really care about the memory usage limit right now.
Solved!
Go to Solution.Hi abdel2,
DAQmx 9.0.2 should work just fine on Vista
x64. Are you getting an error about nidevmon.exe? Were you getting
these errors on the 64 bit machine? It sounds like you might have a
bad installation. Have you tried reinstalling DAQmx? Have you
restarted since you installed?
Installing LabVIEW on Windows Vista x64 Edition
Regards,
Jim Schwartz
Maybe you are looking for
-
Anyone know of a mouse emulator for a touchscreen?
I'm looking to buy a PowerMac G5 and get two screens for it. One just for normal viewing and the other (a touchscreen) to use as keyboard and mouse and also for viewing. I plan on using the setup for music production but I need to know if there is su
-
Multiple Clients in BW 3.5 Development Systems?
In a Development BW 3.5 environment, can we have multiple clients? For instance, can we have a unit test client(with master and transactional data), a security client, and a golden configuration client. We have heard that there may be issues with ha
-
New Tutorial and example available on OTN - representing preferences
The tutorial demonstrates an approach for using preferences in conjunction with approaching limits or thresholds. The approach is useful in dealing with aggregating across a set such as line items, insurance claim lines etc, while considering individ
-
I am trying to install iCloud on my laptop. It is not an Apple product. I keep getting a message saying Administrator won't allow. What can I do to override it?
-
Shockwave 10.3.183.10