Windows Vista x64 with YouP-PAX XFI2007 Revision 2 Works quite w

Dear all X-FI members
I have an X-FI Xtreme Fidelity card and install with Windows Vista x64.
. I download the latest driver from Creative SB-XFI Version 2.3.002
2. I download the Media Source CMS5 Version 5.0.38
3. I install both of them
4. I download YouP-PAX XFI2007 Revesion 2 from the web filefont below:
http://files.filefront.com/YouP_PAX_X_FI2007_Rev2/;748043;/fileinfo.html
5. I extract to a folder. inside the folder there is an instruction as below:
Don't click on setup.exe but click on PAXsetup.exe. It gave an error.
6. I cancel and do it again by clicking on Audio(sub-folder) and then click on
setup(sub-folder)and then click on setup.exe. It gives me a table to select.
I uncheck driver box, and click next and go through the rest installation smoothly.
7. After restart computer. The MediaSourceGo pops up and display all features
8. I check THX console with gane mode and entertaiment mode. All works
9. On both Modes, all speakers 2., 4., 5. and 7. can be selected and have all sounds
0. X_FI CMSS-3D is enabled, X_FI Crystalizer is enabled, EQ and Mixer are worked.
. I do not play games so i do not know any thing about Alchemy and game stuffs
2. when you try to change the Speaker mode. You have to click on THX console to do
3. By the way, even the YouP-Pax revision was working well too. I don't see anything different from YouP-Pax X-FI2007 revision 2. They both work well for me.
4. Reminding that. When you install the applications. PleaseDon't click on setup.exe or Paxsetup.exe. But please click on Audio folder, and then setup folder. then you see the setup.exe, please go down and click on setup.exe and please uncheck the driver box and anything you don't want to be install then uncheck them. After that click on next and that is it. Restart computer.
With all the best to all of you.

Thank you for your post a reply RejZoR
I have come back and updtae the driver from YouP-Pax 2007 revision 2, and it was going through well. You are definitely right.
I hope that every one has all things worked well and be happy with what they have bought from creative
many thanks to those who has done a good contributions to the drivers and applications to make them work.

Similar Messages

Daqmx 9.02 on windows vista x64

I tried to install the latest daqmx drivers but it gave me a bunch of errors while installing NI-VISA and a bunch of other products. Eventually it finished installation but now nidevmon.exe does not start.
Here's what I'm trying to do:
I already have Labview 8.6 with daqmx 8.7 installed. I upgraded my application to Labview 2009 with daqmx 9.02 on another machine. Now I want to transfer that application to this Vista x64 computer. I also want to be able to run the older application (built using 8.6). I was hoping I could install 32-bit version of Labview 2009 along with the latest version daqmx and visa and then the upgraded application will work. Is it possible that the installation files were just corrupted? Can I install 32-bit daqmx on x64 vista? I don't really care about the memory usage limit right now.
Solved!
Go to Solution.

Hi abdel2,
DAQmx 9.0.2 should work just fine on Vista
x64. Are you getting an error about nidevmon.exe? Were you getting
these errors on the 64 bit machine? It sounds like you might have a
bad installation. Have you tried reinstalling DAQmx? Have you
restarted since you installed?
Installing LabVIEW on Windows Vista x64 Edition
Regards,
Jim Schwartz

Can't launch Cisco Configuration Professional on Windows Vista x64

The Help is necessary to resole the issue (see subject).
Tech enveronment
Windows Vista x64
Adobe Reader X ver. 10.1.0 (Russian)
Cisco Configuration Professional 2.5
JRE 6 update 27
JRE 6 update 27 (64-bit)
Internet Explorer 9.0.8112.16421IS
While launch CCP popup the message box :
"Unable to read the resource file. The file could be corrupted. Please re-install Cisco Configuration Professional to resolve the issue."
Ones (never popup after) Popup the message box (InstallShield Wizard):
Adode Reader is not present on the PC. It is required to view the PDF file.
Also the message box InstallShield Wizard:
Internet Explorer with javaplug-in version 1.6.0_11   Cheked
Adobe Flash Player version 10                              Cheked
Memory 1 Gb                                                      Cheked
Screen Resolution 1024x768                                Cheked
Cuted _cpinstaller_004.log file:
Product : Cisco Configuration Professional version 1.0
10-4-2011 16:48:31 LOG   : Command line options =
10-4-2011 16:48:31 LOG   : GetOS: OS Windows Vista
10-4-2011 16:48:31 LOG   : GetOSServicePack: service pack 2
10-4-2011 16:48:31 LOG   : GetIEVersion: IE version 9.0.8112.16421
10-4-2011 16:52:51 LOG   : CheckCCPPorts: WARNING 80 is not a registered HTTP port
10-4-2011 16:53:27 ERROR : SetRunAsAdmin: ERROR REG_APP_COMBAT_LAYERS_ROOT could not be created.
10-4-2011 16:53:46 LOG   : GetJavaIEPluginVersion: java IE plugin version 1.6.0_27
10-4-2011 16:53:47 LOG   : GetFlashPlayerVersion: flash player version 10
10-4-2011 16:53:47 LOG   : GetScreenResolution: screen resolution 8
10-4-2011 16:54:14 LOG   : OpenPDFFile: Adobe reader could not be found on system.
10-4-2011 16:56:17 LOG   : OnEnd: installation successfully completed.

Hi,ngoldwat!
Yes, off cource, I've tried to launch CCP with Administartor rights - no success.
I have re-installed CCP under Local Admin and launched it. Great!!! It works! But, one of but, the app does not launch from domain user while I use Run as Administrator. I think the issue in the permission and/or user's profile.
Thanks ngoldwat! You have helped me.

Crystal Reports 2008 in Windows Vista x64 + IIS7 DOESNT WORK!!!!!! HELP!

Hi,
I´m developing an application with Microsoft Visual Studio 2008 and Crystal Reports 2008 Professional
(i´m not using the Crystal Reports 2008 for .Net basic)
As I have Windows Vista x64, my ASP.NET applications run under IIS7, but for my surprise, Crystal doesn´t work under Vista x64 + IIS7. I got the following error:
An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient, or the Crystal Reports runtime is not installed correctly. Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.
When I run the same routine in an Windows Application the error doesnt occur. It only happens under Web Applications.
I tested in a Windows Vista 32 bit and there´s no error....
Crystal Reports 2008 does not work in II7 x64 ?
Is there any solution?
Please.... help me!!!!!

Hi Fernando,
Please read and follow the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] for future topic posts as yours violates the current policy.
You will need to build your application to run in 32 bit only mode. This note explains how to do it:
[Set app to 32 bit mode|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
Jason

Problems Installing CS3 Web Premium on Windows Vista x64

I was (key word) having problems with my installation of CS3 on my brand new (3 days old) computer with Windows Vista x64. Finally after two days of installing and uninstalling, I called Adobe support. I was pleasantly surprised with how quickly they solved my problem (if only I had called sooner).
Having worked on this for 2 days I have seen and tried everything except of course the cure. So I wanted to put this out there for any one else that is having problems.
The symptoms:
- Everything seemed to install correctly (except acrobat which is another story. you can find lots of post about that.). No errors during installation. And when it finally completed installing, all that was left was to click "finish" which indicated to me that installation was successful.
- Open Photoshop. PS would open and immediately stop working. Vista said it was not responding.
- Open any of the other programs and the little vista circle would spin for 5 to 10 seconds then nothing. Program did not start to open. Just nothing.
The problem: Unbeknown to me (never saw an error message) "Licensing for this product had stopped working". When I described above symptoms tech support went straight to this.
The solution: Download the Licensing Service Update and run it. http://kb.adobe.com/selfservice/viewContent.do?externalId=kb401528
Once I ran this, Photoshop opened and let me enter serial number and activate CS3.
If after your installation, Photoshop or any of the other programs seem to get stuck or you never get the dialog box to enter serial number, the Licensing Service Update should fix things for you.

wow...thank you so much for this posting. I just got home & followed your steps and now I have CS3 up & running. After 4 days of stressing out, finally someone was able to assist. Why can't the Adobe Experts & Employees on these forums supply this much needed information?????
I seriously understand why people want to get crack versions of this software rather than paying hundreds of dollars like us and avoid all this BS and get no support whatsoever!
Thank you again!!

Are there previous versions of icloud control panel available for Windows Vista x64?

I have had icloud 2.1.3 running on my pc for years (up to tonight). I uninstalled it from my computer in hopes to update the software. Unfortunately, I learned that the latest version of the icloud control panel is only compatible with Windows 7/8. I contacted Apple support to re-download the software and I'm being told that there's no way to obtain a previous version. ***? Does apple honestly leave consumers of their products high and dry like that? Wow!
Does anyone know of a trustworthy source to re-download previous versions of icloud control panel that are compatible with Windows Vista x64?

I does work, I also had it on my PC/Vista, but had to reformat and now I cannot find it....sheesh

Windows Vista Home ( with SP2) constantly reporting that Safari 5.1.2 has crashed ( usual Windows prompt to close program) yet Safari is still running although loading pages slowly. Any one seen this recently ( note no recent install or changes to Windows

Windows Vista Home ( with SP2) constantly reporting that Safari 5.1.2 has crashed ( usual Windows prompt to close program) yet Safari is still running although loading pages slowly. Any one seen this recently ( note no recent install or changes to Windows

Windows reports that Safari stopped working . Windows Task Manager shows webkit2webprocess.exe process still running even after I respond to Windows prompt and close Safari ( Safari continues running after this action )

Installing iTunes 7.0.2 on Windows Vista X64

Hey guys,
Sorry if this has been covered in the past, I looked over the forum and couldn't find anything on this. However I have a solution for installing iTunes 7.0.2 on Windows Vista x64.
What was happening was that anytime I installed iTunesSetup.exe from Windows Vista x64 it said it couldn't find QuickTime and aborted the install. Well what was happening is that all 32 bit installers now go to the "Program Files (x86)" directory. And the install team at Apple hard coded iTunes Install to look for the QuickTime folder in "c:\Program Files" instead of getting the location provided by the OS ("c:\Program Files (x86)\"). So it blows up when it cannot find the QuickTime directory in the wrong location.
First download QuickTimeInstaller.exe and install QuickTime. (http://www.apple.com/quicktime/download/)
Move the QuickTime folder from c:\Program Files (x86) to c:\Program Files
Then download iTunesSetup.exe and install iTunes. (http://www.apple.com/itunes/download/)
Worked perfectly for me. Let me know if anybody has any problems. I would also like to forward what I found to apple so that they can fix this in the future. Does anybody know a good source to send this too?

Maybe you can hel me
Im unable to install itunes 7.0.2 because each time I try to i get an error message saying I have insufficient access to that key...the key being HKEYlocalmachine\software\microsoft windows\...etc, etc. etc...
Can you helP???

Does anybody know to authorize a windows vista computer with the new itunes?

does anybody know to authorize a windows vista computer with the new itunes?

Authorization and Deauthorization
Macs: iTunes Store- About authorization and deauthorization.
Windows: How to Authorize or Deauthorize iTunes | PCWorld.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it.
More On De-authorizing Computers (contributed by user John Galt)
You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
1. Open iTunes on a computer
2. From the Store menu, select "View my Account..."
3. Sign in with your Apple ID and password.
4. Under "Computer Authorizations" select "De-authorize All".
5. Authorize each computer you still have, as you may require.
You may only do this once per year.
After you "de-authorize all" your authorized computers, re-authorize each one as required.
If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.

Could not load file or assembly 'Oracle.DataAccess' Windows Vista x64

Ok now here is the funny part, this works fine when i'm developing ASP.NET applications ( i assume that is puts the dev web server into x86 mode), but when im trying to use Oracle.DataAccess DLL in a console application i get a '+Additional information: Could not load file or assembly 'Oracle.DataAccess, Version=2.111.6.20, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.+' error in visual studio when i try and debug and also when i try and run the console app.
Using the latest ODP.NET 11.1.0.6.20, Windows Vista x64 SP1 (all updates installed), Visual Studio 2008 SP1

never mind, figured it out, the Platform target in studio was on "Auto" and was defaulting to x64....

Java command in windows vista x64

I have installed the latest jdk on a 64 bit windows vista machiene and the java console commands wont work. Whenever I type java or javaw into a command prompt, I get a 'java' is not reconised... error. I believe this is what is preventing me from installing Eclipse as well.

Nevermind, I figured out what was wrong. I have 64 bit vista and apparently the eclipse I downloaded was 32 bit. Since I cant find a 64 bit eclipse (it probably exists, I just cant find it) I installed a 32 bit jdk and it works now.
Thanks!

R&R Backups on Vista x64 cannot be restored on Windows 7 x64 with R&R 4.x?

Hello -
Have created a full backup with R&R on Vista x64 prior to clean installing Win 7 x64. Have installed the new version of R&R for Win 7. Plugged in my external usb drive containing the backup, but R&R refuses to see it. Any suggestions?
Thanks,
Michel
Solved!
Go to Solution.

See this post by me
http://forums.lenovo.com/t5/ThinkVantage-Technologies/Rescue-and-Recovery-4-3-on-Windows-7-Pro/td-p/...
and skip to step 3.

Can't Burn CD's with iTunes in Windows Vista x64

Last night I attempted to create an MP3 CD as well as an Audio CD but every time I tried to iTunes popped up a messaging saying that I didn't have a disc or burning software to complete that action. I know there was a disc in there, and iTunes even recognized a blank disc when it was inserted. Is there a problem with burning cds with iTunes in the 64 bit version of Vista??

Microsoft Windows Vista Professional (Build 6000)
Biostar TF 570 SLI
iTunes 7.3.2.6
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
UpperFilters: GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
NVIDIA, NVIDIA GeForce 8600 GTS
Connected Device Information:
Disk drive, ST332062 0AS SCSI Disk Device, Bus Number 0, Target Id 1, LUN 0
CD-ROM Drive, LITE-ON DVDRW LH-20A1L SCSI CdRom Device, Bus Number 0, Target Id 0, LUN 0
Failed while scanning for CD / DVD drives, error 2355.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
D: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.

Crackling sound on Windows 7 x64 with K9N neo V 1.0

Hi
I installed Windows 7 x64 ultimate on my computer yesterday and everything worked fine except the audio, I installed the latest realtek drivers from MSI for x64 windows vista/7. But still I got the problem that it play fine and suddenly it "cracks" for less than a second and then it's like fastforwarding the missed ~halfsecond.
My hardware is:
4600+ X2 amd athlon
Ms-7260 ver 1.0 k9n neo nForce 550
6Gb of 667 MhZ kingston ram (2x2GB, 2x1GB)
GTS250 1024 mb MSI
samsung 500gb internal sata hdd (which windows 7 x64 ultimate is installed on)
q-tec 650w powersupply
The audio works perfectly in windows xp x86 and has done that the last 3+ years.
Is there a "fix" for this?
Thanks in advance

Oh man, this is quite some time ago that I could do this...
here it comes, BRASE YOURSELVES!!!!!!!!!!!!!!!!!!!!!!!
EVERYBODY GET OF THIS FORUM NOW!!
THERE IS A FIRE HAZARD!!
A Q-TEC POWER SUPPLY HAS BEEN SPOTTED!!
LEAVE NOW, WHILE YOU CAN!!!!
Man, that's quite some time ago I could do this...
I know, you may find it a bit overdone but really, a Q-Tec PSU is just one piece of junk. It's just some componetns thrown into a box and then they call it a power supply. Did you actually feel the weight of that thing? I bet you didn't. It weighs nothing, so you can't even use it as a door stop or paerweight.
Really, shut down your pc, take it out and throw it away. Be careful not to hit someone while doing that. (I mean, throw it in the bin or take it back to the guy who sold you this thing).
Get a good power supply. One with enough juice on the 12V-line. Take a psu with one 12V-rail. A good psu will cost you, but you will most certainly notice the difference.

I wanted to buy a new Canon EOS 7D mark ii, but my computer's OS is Windows Vista x64.

Will the Canon software install? I think it is the Canon EOS digital solution disk Ver 29.1.

I was using Vista x64 until last week, and I came to the determination that the new Canon software was not going to work with it. Finally, I threw in the towel. I contacted Microsoft, and the tech support guy _claimed_ that the machine could be upgraded to Windows 7, but that it would require premium support ($99 fee). I thought about it and then agreed. The charge was initiated, and then this guy spent five hours trying to get there from here. Finally, he threw in the towel, and it is not as easy as he had thought. Then I went around and around with the supervisor about this. At a minimum, they had to reverse the fee. They claimed that they couldn't do that, either. So, let's just say that Microsoft is not at the top of my favorites list. So, after thinking about it a bit more, I decided to buy a new machine with Windows 7 on it (not Windows 8). The new Dell machine was purchased and then installed. After a while, I was able to install the new Canon software and other software successfully. By the next day, I discovered some technical problems on the new machine. Basically, there was a fault on the motherboard. So, I had to get Dell tech support involved. They remotely worked on it for hours, and then they threw in the towel. I had to get the supervisor involved, and he would offer me the option of taking the entire computer back to the store to get a total exchange. That was unacceptable because of all of my time spent installing software. Now, Dell is skating out over the horizon, so they are not at the top of my favorites list. They did say that they could have a technician dispatched to my location to swap out the motherboard (leaving the hard disk intact). It just was not worth all of this trouble. I'll fix the problem myself. The only thing working right is the Canon camera with its software.

Windows Vista x64 with YouP-PAX XFI2007 Revision 2 Works quite w

Similar Messages

Maybe you are looking for