Windows Visual C++ error (?)

I've been burning discs via ITunes for six months w/o issue. I recently started having a problem: After the cd burning finishes I get a quick audio blast followed by a 'Windows Visual C++' error tab on my bottom toolbar, and a rotating blue hourglass. This rotating hourglass does not go away unless I restart my pc. I have ITunes 7.5 installed. Any ideas? Thank you.

Could you please paste the whole error message here or check the event viewer to find error information about office and windows explorer?
Please keep you win7 up-to-date, you can also try
Start your computer in safe mode
http://windows.microsoft.com/en-in/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7
If you issue persists, refer to this link (reply posted by Andre), then upload the crash dump file here.
http://social.technet.microsoft.com/Forums/windows/en-US/88c1f21d-7c04-4c59-aed3-d98fa674dfe7/explorer-crash-restart?forum=w7itproui
Regards
Yolanda
TechNet Community Support

Similar Messages

HT1923 Itunes reinstall on Windows Vista C++ error problem

I am trying to reinstall itunes and I keep getting MS Visual C++ error messages. I purchased one of the online tools that is supposed to correct these types of issues and I still have the same problem.

See Troubleshooting issues with iTunes for Windows updates.
tt2

Visual C++ error, CS5

I have been getting a Visual C++ error when I press the print button, sometimes. No info, just a window stating a Visual C++ error and an OK to close CS5. Have to reboot the PC to start CS5 again. My only solution is in sert the CS5 CD and re-install.
Any other suggestions, before I try the re-install.
thanks

Just an update. Sorry I forgot to mention that I share the Epson 3800 with my other computer. When I hit print it goes to the other PC and then to the printer. I have had this setup for several years with my 3800 and 2800.
Since the 3800 can be networked, I printed using the network by-passing the other PC. Everything worked fine.
I found a solution, but did not fix the problem. Oh well, whatever works.
Thanks for your suggestions.

Runtime visual C++ error related to nimxs.exe

Hi
I am getting a microsoft visual c++ error saying that this application has requested to be terminated in an unusal way and it points to nimxs.exe and mentions to contact applicatons support team. Everythingwas running fine one moment and then I had to reboot the system and this error mesaage pooped up and now I cann't open any VI or MAX. This machine was not connected to onternet and it doesn't have any anti virus software on it.
I am really confused how to fix this. I browsed some message about some people saying that they have seen similar problem but couldn't find a fix.
Software
Windows 2000
LabVIEW 7.0, 7.1
MAX 4.0
Any help would be appreciated. I have lots of important vis on this machine and I need them to work ASAP
Thanks
Ankit

Hello Ankit,
I would try to go back and see if your hardware and driver are actually working from MAX. From your message, looks like you are trying this already but MAX is closing on you! LabVIEW is also closing on you or just when you run VIs that call the hardware?
Make sure you do not have a corrupted file in MAX using this Knowledgebase: Why Do I Get a Measurement & Automation Explorer (MAX) Database Connection Error?
Finally, try to repair the driver and do not worry about the C++ program until you actually can see a working Test Panel in MAX. I think there is corruption in the driver and probably a repair will be needed.
Hope this helps for now,
Gerardo O.
RF Systems Engineering
National Instruments

I am getting a Miscrosoft Visual Runtime Error. How do I fix it.

Here is the error screen that pops up when I open Photodhop Elements 10. When I click ok Photoshop closes and will not do anything.
Here is the Photoshop Window.
What can I do to fix this?
Thank You

Lots of info here:
https://www.google.com/search?q=Miscrosoft+Visual+Runtime+Error.&rlz=1C1_____enUS421US421& oq=Miscrosoft+Visual+Runtime+Error.&aqs=chrome..69i57&sourceid=chrome&es_sm=122&ie=UTF-8#q =photoshop+elements+Miscrosoft+Visual+Runtime+Error

Windows Blue Screen Error Message Appears As Soon As IPod Connected

Everytime I connect my IPod to my computer, I get the Windows Blue Screen error message. Thought it was the cable, so plugged cable in by itself. No problem. Uninstalled IPod and ITunes software and then plugged in IPod, still got the Blue Screen. The Blue Screen says something about "recent plugged in device problem". It is not the cable, it must be the IPod. Did not have this problem when I bought it. Tried it on labtop and get the same error message. I can't do updater or anything that requires me to plug the IPod into a computer because the Blue Screen appears immediately. When I unplug, the Blue Screen remains and locks up the computer so I have to restart each time. I have tried everything I can think of. Please help.

Hi Mike thank you for replying,
I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
If you can help me out or suggest where to search it would be much appreciated.
Thx

Windows prompting send error report or dont send

when am using labview application windows prompting send error report or dont send can some one help in this..I did all re installation and windows update but no use..

You will need to provide more details as we cannot see your computer screen. Does this happen every time you launch LabVIEW? What version of LabVIEW are you using? What version of Windows? Does LabVIEW crash? If so, what were you doing at the time it crashed?

When I connect my iTouch to my PC (windows 7) an error message is displayed reading "iTunes was unable to load dataclass information from sync services. Reconnect or try again later".

When I connect my iTouch to my PC (windows 7) an error message is displayed reading "iTunes was unable to load dataclass information from sync services. Reconnect or try again later". I have completely uninstalled and then reinstalled iTunes. I have also completely reset my iTouch to factory defaults. I have even followed all the advice provided previously to other forum member with the same problem. Nothing seems to work. Please help me someone.

I'm getting the same problem with both my IPad 4 and iPhone 5
Just started a few weeks back, Since then I have had two Itunes updates.
Is this something Apple is aware of and trying to fix?

Windows-No Disk Error Mess

I get the following error message upon start-up or reboot for Audigy SE:?Windows-No Disk?c0000003 Parameters 75b6bf9c 4 75b6bf9c 75b6bf9c.... I have the option to Continue-Cancel-Retry??The sound card seems to work otherwise, but this error is annoying and I would like to resolve it. I tried uninstalling and reinstalling the install CD as this is a new install, but the error persists. Can someone suggest a Fix-It?Thanx!?Lawrence

I have found the Windows No Disk error message to be caused by having a card reader installed in your system in some cases. If you change the dri've letters of the readers from i.e. F: and G: to for example O: and P: (as I did on my machine) the error message will stop. Worth a try.......worked for me. Hope you find this reply useful, unlike the previous wise a$$ replies.

Windows - No Disk Error - Please help!

Windows - No Disk Error - Please help!
Hi,
I have the following set up:
* Lenovo T-61p
* Windows XP Pro, SP 3
* HP Photosmart 8250 printer (with nothing plugged into the various card readers, and USB slot in the printer)
I am getting the following error:
Windows - No Disk
Exception Processing Message 0xc0000013 Parameters 0x75CE023C
0x84C40C84 0x75CE023C
I have done a lof experimenting and thru process of elimination, and believe I have determined that this only happens when the HP Photosmart 8250 printer is plugged in to the USB slot of the computer.
I can stop it from happening by safely removing hardware, and removing the drive that the 8250 creates on your computer when you plug it in. In my case, this is drive E. I'm guessing if there was something in the the various card readers, and USB slot in the printer, that's what those would be, but I don't those use those functions of the printer.
I understand there is more at work than simply the printer, because I did not used to get this error, so some software changed as well, that is scanning all ports, and finding a drive that has no disk, and producing the error.
A simple google search finds a lot people all over the world having this problem, and are solving it in different ways, because the suspected source is different: Norton, HP, etc.
I have tried everything I have read, and the only thing that works was my own idea, of manually safely removing the drive the printer creates each time I plug in the printer.
Anyone every any better, more permanent solutions? Or know what the real root of the problem is? What is scanning all the drives and being showing an error message because it found an empty drive?
Thanks and Happy Holidays/New Year!

I've been getting the same error on my 4G nano for the past week. I've had my nano for about a month and the first few weeks were fine. Tried it on 2 different computers (Vista and XP) and same problem. Tried it on a 3rd (XP) and it started ok. Problem started coming back after a day.
I was able to find a quick fix though. I noticed that sometimes the message says something like "iexplore.exe... no disk..." even if I don't even use IE. What I do is end iexplore.exe on task manager before running iTunes and syncing my nano. I don't get the error whenever I do this, but one drawback is that the contents of my nano suddenly pops up in a window - even when disk use is not enabled.
I've reset/restored my nano dozens and dozens of times to make sure it's clean. Leads me to believe it's a driver issue. Either that or I have a friggin malware problem I can't seem to find.
I'll be posting updates every now and then. I'm no expert so I'm hoping an Apple expert also steps in to give some input.

Crystal Report Windows Forms Viewer Error in 1 Workstation after upgrade of PL

Hi all,
We just upgraded SAP from 8.82 PL02 to 8.82 PL15.
Afterwards, in just 1 workstation, Crystal Reports layouts have Crystal Report Windows Forms Viewer error I attach.
Before the upgrade this error did not happen.
No permissions or authorizations were changed in the workstation.
The Crystal Reports layouts remain working fine in server and in the other workstations.
In the workstation following are installed:
- Operating System Windows 7;
- Microsoft .NET Framework 4.5;
- SAP Crystal Reports runtime engine for. NET Framework;
- Crystal Report 2008 Runtime SP6;
- Microsoft SQL Server 2008 R2 Native Client.
All, but the operating system, are equal to the other workstations.
User has edit access to SAP folders, temp and access to the attach path.
We already uninstalled SAP client and client agent and re-installed it but with no avail.
Can anyone help me?
Thanks in advance.
Best regards,
Pedro Mariano

Hi San Xu,
Thank you for your input.
However I'm facing problem with each software is suitable.
I installed SAP Crystal Reports for SAP Business One (CR 2011 V14.0.4.738), but with no avail.
Thanks in advance.
Best regards,
Pedro Mariano

I have installed the latest version of iTunes for Windows 8 but when I try to open it, it says Windows has an error and I simply can't open it any longer. Any help is appreciated!

I have installed the latest version of iTunes for Windows 8 but when I try to open it, it says Windows has an error and I simply can't open it any longer. Any help is appreciated!

Hey socestlavie,
Thanks for the question. I understand you are experiencing issues with iTunes for Windows. The following resource may help to resolve your issue:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Thanks,
Matt M.

I-tunes won't download onto Windows XP. Error message 'this application package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this a a valid window Installation package'.

How do you download i-tunes onto Windows XP when error message occurs, 'This application pack could not be opened. Verify that hte package exists and that you can access it, or contact the application vendor to verify that this is a valid window installation package'.

I wish I knew because i'm having the same problem. As soon as I find the answer I will post.

On Windows Platform, encounters error when trying to open an Indesign document created from MAC

Hi all,
On Windows Platform, encounters error when trying to open an Indesign document in INDD format created from Mac. Error received "Either the file does not exist, you do not have permission, or the file may be in use by other application". I am currently using Adobe Indesign CC 9.2 Trial version.
Kindly advise how can i open this document on windows platform and allows me to edit the document.
Thanks!
With Rgds,
Fiona Choy

Normally there is no problem to open any INDD opening on Windows, when created on the Mac.
But Mac user are often not aware on the naming limitations. A file name must not contain /, \, |, :
It should not contain any extended character, it is not a primary problem but will be, if something links to that file, so avoid also: ÄÖÜäöüß+&
You can use all other non A-Z a-z, 0-9 and - and _
I personally would also recommend to avoid spaces.
This is valid for the INDD file itself but also for all linked content.

While installing windows with bootcamp error showing "A require Cd/Drive driver is missing" in the middle of installation. Please help what to do ??

While installing windows with bootcamp error showing "A require Cd/Drive driver is missing" in the middle of installation m not able to install windows on my mac . Please help what to do ??

What DVD drive are you using?

Windows Visual C++ error (?)

Similar Messages

Maybe you are looking for