Windows Wista on Macbook

hi,
I'm planning to buy Macbook. I want to use it with bootcamp and get rid of my pc laptop. Windows for office stuff and mac os for all other things.. But the GPU really makes me worry as how it will handle the updated sofwares in near future..
For example does anyone have any idea if Windows wista will run smoothly on macbook ? As I heard Premium version needs a graphics processor that runs Windows Aero and at least 128MB of graphics memory. So if that is the case than macbook will not meet even the min. specifications.
Does anybody have any idea ?
tks / Gokce

It is confusing…
Right… then its a math thing. From the specs page Apple assumes that the the product they sell has 512MB RAM. So when the graphics processor grabs 80MB it then leaves you with 432MB (512MB - 80MB = 432MB) of memory to Mac OS X.
Up above, to provide the default 64MB the system needs a 16MB overhead which gives you the minimum graphics memory usage of 80MB (64MB + 16MB = 80MB).
Nowhere on any Apple documentation, which includes the developer hardware tech note, does it ever state there is a maximum graphics usage, only the 80MB minimum usage is stated.
This is why I wanted to know the source of the information.

Similar Messages

Bootcamp assistant doesn't restarts to the Windows installer. Macbook pro 13" (early 2015)

I'm trying to install windows 8.1 on my new macbook pro 2015, things are good until I got to the point after I chose the size of partition then mac restarts. It supposed to reboot to windows installer as described in step 4 below, but it boots into mac.
I was able to install the windows to my macbook air before without a problem, hope someone could suggest what I did wrong here.
Followed exact steps from here - How to install Windows using Boot Camp - Apple Support
1. Check System Requirements
Some versions of Windows require a certain processor, and more hard drive space and memory (RAM) than others. Check the documentation that came with your copy of Windows to find out what you need. Then use System Information to see what your Mac currently has.
2. Create a disk image of your Windows disc
When you purchase Windows, it either comes as a disk image file (ISO) or as an installation disc. If your copy of Windows came on a DVD, you should create a disk image of your installation disc.
3. Open Boot Camp Assistant
Boot Camp Assistant walks you through installing Windows on your Mac. Open this app from the Utilities folder in the Applications folder and follow the onscreen instructions to automatically repartition your startup disk and download related software drivers for Windows. When prompted, connect your USB flash drive.
4. Format your Windows partition
When you complete the assistant, your Mac restarts to the Windows installer. When you're asked where you want to install Windows, select the BOOTCAMP partition, then click Format.
5. Install Windows
Follow the onscreen prompts to finish your Windows installation.
6. Restart your computer
After Windows is installed, you can switch between OS X and Windows. Use the Startup Disk preference pane in OS X, or the Boot Camp system tray item in Windows to select your startup disk, then restart your computer

Ok, I finally got the problem solved. It didn't mention anywhere that I have to restart and holding down the 'option' key, then go to EFI boot... hope it'll help someone with the same issue.
Cheers!

Windows xp on macbook pro 2011 paralles on the monitor does not work

windows xp on macbook pro 2011 with paralles desktop 6 monitor is working to evil;
windows 7 with bootcamp work but I activate the software does not start on reboot, I apologize for the translation, thanks

Post in your native language. There are excellent translators.

How to install Windows 8 on Macbook pro with retina display ?

Hi - How to install Windows 8 on Macbook pro with retina display ?
I am pretty new to the apple world. Tried doing it through bootcamp but did not success.
I am not interested to install it through Parallels or Fusion. Plz guide.
Thanks !

OK, use Windows 8 in Bootcamp. Be aware that there are no Bootcamp drivers for Windows 8 yet. So you may experiance not only delays but display problems, freezing, crashes and other problems.
Here is the Bootcamp forum. Make sure you read all the posts from people experiencing Windows 8 problems with Bootcamp. https://discussions.apple.com/community/windows_software/boot_camp

How to install Windows 8 on Macbook Pro w/ Retina Display?

Hi,
I'm new to Macbook Pro w/ Retina Display. I'm a non-tech guy. Well, I'm familiar with Windows PCs but not familiar with Macbook Pros and OS X.
Please if you people can step me step by step that how to Install Windows 8 on Macbook Pro w/ Retina Display 15 inch.
Because recently, Apple released OS X Update 10.8.3 which includes support for Windows 8 in Boot Camp.
I will be very thankful. Please help!
Thanks

Hi Mende1,
Thanks for the fastest reply. Well, As I said I'm non tech noob on Macbook Pro.
Well, The Guide is simple but there are few questions which I'm not able to understop still.
1. How to get the copy of Windows 8? I have bought Windows 8 Ultimate and I have Genuine Key with me but I don't have files.
2. Secondly, I have Bluetooth Apple Wireless Keyboard and Magic Mouse, Is this compatible with Windows 8?
Thanks

Cannot boot from usb flash to install Windows 8 on Macbook Pro 13"

Hi! All
I have a 2011 Macbook Pro 13" and I want to install Windows 8 on it. I use bootable USB stick, which I can boot fine from on my PC, so I assume it's not the USB stick that is a problem. First of all Bootcamp didn't recognise it. Fine, I partitioned the laptop's hard drive myself. Then while rebooting I held the Option key to manually select the USB drive, but it did not appear on the list. As someone suggested on the internet I even replugged USB stick to another slot during while on that screen, but it didn't help too.

Welcome to Apple Support Communities
You can install Windows from a USB drive in one of these Macs:
- MacBook Pro with Retina display.
- Mac mini (Mid 2010 and newer).
- MacBook Air.
- iMac (Late 2012).
You don't have any of these computers, so you can't install Windows through a USB disk. Its firmware doesn't allow you to start up from your Windows installation disk.
You have to buy Windows 8 on a DVD. You need a System Builder version, which you can buy at Amazon or NewEgg. Follow Apple's steps to install Windows on the MacBook Pro > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf

I transferred my iTunes library from Window PC to MacBook pro and now I cant play songs that I purchased with an earlier ID and Password. How can I get around this problem?'t

I transferred my iTunes library from Window PC to MacBook pro and now I cant play songs that I purchased with an earlier ID and Password. How can I get around this problem?

Authorize the computer.
iTunes Store: About authorization and deauthorization - http://support.apple.com/kb/HT1420 - and another helpful post: https://discussions.apple.com/message/17828050

How to completely remove mac os and install windows 7 on macbook pro with retina display 15 inch

how to completely remove mac os and install windows 7 on macbook pro with retina display 15 inch

There's not much sense in purchasing a Mac to run only Windows on it. Keep in mind that drivers for Windows are a secondary concern for Apple. While Windows will typicall run fine, things like power managment are not optimized under Windows (you'll get less time on battery while running Windows). You will also not be able to install firmware updates. Firmware updates might be necessary whether you run Windows or OS X as they are updates to the code in your hardware and are not OS-specific. You must be running OS X in order to install a firmware update. You can do this even if you boot off of an external drive with OS X installed on it. At the very least, you should keep just a small partition for OS X on your internal drive.

Install windows on my MacBook Pro7,1 (Version 10.6) **doesn't have an optical drive**

I recently replaced my HDD for a 1 GB SSD. Then I took out my optical drive and installed a HDD. I wanted the extra space to store videos and pic and such. I also upgraded the RAM.
I want to use bootcamp to install windows on my macbook pro. However, when I go to Boot Camp Assistant, its says "You need an optical drive to install Windows."
***I removed my optical drive and now have a HDD. I want to use a USB.***
SO, after I click continue... it gives me two options. Option 1 says Download the Windows support software for this Mac. Option 2 says I have the Mac OS X installation disc that came with my Mac or I have already downloaded the Windows support software for this Mac to a CD, DVD, or external disk.
My question is, HOW DO I INSTALL WINDOWS on my Macbook pro?
do I have to have an optical drive? that means, I have to take out my HDD and put my optical drive back in. Or can I just use a USB? if so , HOW?
Can I install Windows (7, 8.1) to a USB? Or download the Windows support software to a USB? and click on Boot Camp Assistant and click option 2? so when it asks me to put in the CD, I can just plug in the USB and install the Windows support software? and then put the codes in to install windows?
I hope I'm making sense. I saw several videos on Youtube and i just need some help.
Thank You.

So basically, I have trying to install windows on my mbp using a usb drive. However bootcamp wont allow me to do so since I have a optical drive on the laptop. I have been searching for a long time and eventually came across this solution and I would like to share this so u guys dont have to google all over the place again .
The solutions given before by changing info.plist is correct except that now Bootcamp crashes everytime you change it in OSX 10.9.
Full solution:
1. Add your Boot Rom Version(from system info) under DARequiredROMVersions.
2. Add Model Identifier(from system info) under PreUSBBootSupportedModels
3. Delete "Pre" from "PreUSBBootSupportedModels", so you have "USBBootSupportedModels"
The first 3 steps are same as before and if its not clear you can easily google solutions with screenshots.
The next step is only for OSX 10.9, as it employs some kind of code signature to prevent you from changing info.plist and cause bootcamp to crash.
4. Open your terminal, use the following command
sudo codesign -fs - /Applications/Utilities/Boot\ Camp\ Assistant.app
Sudo means using administrator privilege and u need to enter your mac password. And the command resigns the bootcamp application so that it runs with the new info.plist file and not crash.
5. Continue on with your installation....
Cheers.
P.S. back up info.plist before u change anything.

Can I install Windows 8 on MacBook Pro retina?

I need to install Windows 8 or 7 in Boot Camp in order to run my embroidery software. What specific form of Windows do I need to install a full version (not an upgrade, since I do not have Windows on the MacBook Pro)? Also, I understand that Boot Camp 5 will not run Windows 8.1. Should I buy Windows 7 and steer clear of 8 altogether?
My Bernina and Floriani embroidery software will run on either Windows 7 or 8.
Many thanks in advance,
Joanna

Yes but with that version, style, it is tied to the first set of hardware, computer, it is installed on. So in theory it can't be moved to another set of hardware, computer.
Message was edited by: LowLuster

Can I run Quickbooks Contractor for Windows on my Macbook Pro with Bootcamp ?

Can I easily run Quickbooks Contractor for Windows in my Macbook Pro and exchange QB data files with my accountant ?

You can run any Windows program once you install Windows on your computer using either Boot Camp assistant or a VM like Fusion, Parallels, or VirtualBox.

How to get clamshell mode with Windows 7 on Macbook Pro?

Hi,
I am running Windows 7 on Macbook Pro using bootcamp. In OS-X, I can use this cool clamshell feature wherein after putting the MBP to sleep by closing the lid, as soon as I connect an external keyboard, mouse & monitor, I get the display on the monitor and immediately start using the keyboard & mouse too, converting the laptop instantaneously to a desktop.
I am trying to do the same thing on Windows 7, close the lid of the laptop to put it to sleep, connect my external monitor, mouse & keyboard, but however the laptop never wakes up (even after moving the mouse & pressing keys in the keyboard). I tried several things in Windows 7. Under Power Options, Disabled "selective Suspend of USB", but that did not help. Next, in the "Device Manager", for the "Root USB Hub" & "Generic USB Hub", I tried to set "Allow this device to wake up the computer", under Properties -> Power Management, but that option is grayed out. I tried to experimented with Sleep types like S1, S2, S3, but except for S3, the other two are shown as "not supported by firmware" (using powercfg option in command line). Countless hours wasted on google search to get this working with no success
I would greatly appreciate any help on this issue.
Thanks,
Sri

@mkultraviolent,
Thanks for the quick reply.
That seems to be a useful workaround, but I do not find the option mentioned in Display/ Nvidia control panel. However, I find an option in the "Power Options" which has a "Do Nothing" option in the combo box to select what "Closing the Lid" does. Is that what u are referring to?
Also, one problem in this approach is, if we do not sleep when the display is closed, that will keep the internal display (laptop's display) running in clamshell mode even after the lid is closed? (which will heat up the laptop badly).
The exact option I am looking for is, while the laptop is in sleep & lid closed state, connecting the external keyboard/mouse/monitor and pressing a key in the keyboard or moving the mouse should wake the computer from sleep. If this happens, the internal display won't be running. I am able to achieve this in OS-X.
In Windows7, I have a workaround by which I can almost achieve this result, wherein, while the laptop is in lid-closed, sleeping state, after connecting the external devices (keyboard/mouse/monitor), I open the laptop's lid for a fraction of second, quickly move my finger over the touchpad & close the lid again. This wakes up the laptop, & while it is waking up, Windows realizes that the lid is closed and that external devices are connected and gets into clamshell mode (I have verified that in this state, the internal display is not running).
This workaround was fine so far, but I got this hengedocks docking station for my macbook, and I am no longer able to use the workaround, because, after plugging my macbook into the docking station, I cannot open the lid. So, the only option is to make Windows7 realize that external devices are connected & wake up on external keyboard stimuli (Hence the question).
If my question is not clear, this video kind of explains what I want to achieve:
http://www.youtube.com/watch?v=YOKu9uwdwZI&feature=player_embedded
Appreciate ur help!

After start Windows 8 on Macbook Air (late 2011) all freeze.

When I start Windows 8 on Macbook Air (late 2011) all freeze. If I switch off Wi-Fi adapter or power unit problem does not exist. Do you have same problem?

Here's how to fix the problem.
Macbook air 2011 freeze fix
1. Install Windows using Boot camp on battery power (AC adapter unplugged).
2. After the installation, right click on the power icon.
3. Click More power options
4. Click change plan settings for the balanced plan
5. Click change Advanced power settings
6. Select "PCI Express"
7. Selct Link state power management
8. Change Plugged in from Moderate to OFF.
Done! No more crashing. Now you can plug in your AC adapter.

Cant install windows 8 on macbook pro 13 inch mid2010

Cant install windows 8 on macbook pro 13 inch mid2010 Mountain lion 10.8.3. When i insert the windows 8 CD and try to install it on bootcamp Version 5.0.2 it say "Windows 8 is not supported on this Mac, Boot Camp only supports installing Windows 7 on this Mac. Please insert a DVD which contains a full version of Windows 7." i saw other topics using same mac and they installed it.
Please need help

Your computer is not supported for Windows 8. Read the System Requirements here http://support.apple.com/kb/HT5634. In case you missed the table of supported systems I'll repeat it below. Please note that your computer is listed as not supported.
Mac model
Windows 8, 64-bit
Windows 7, 64-bit
Windows 7, 32-bit
Windows Vista, 64-bit
Windows Vista, 32-bit
Windows XP, 32-bit
MacBook Pro (Retina, 13-inch, Late 2012)
5
5
MacBook Pro (Retina, Mid 2012)
5
5
4
MacBook Pro (13-inch, Mid 2012)
5
5
4
MacBook Pro (15-inch, Mid 2012)
5
5
4
MacBook Pro (17-inch, Late 2011)
5
5
4
MacBook Pro (17-inch, Early 2011)
5
5
4
MacBook Pro (15-inch, Late 2011)
5
5
4
MacBook Pro (15-inch, Early 2011)
5
5
4
MacBook Pro (13-inch, Late 2011)
5
5
4
MacBook Pro (13-inch, Early 2011)
5
5
4
MacBook Pro (13-inch, Mid 2010)
4
4
4
4
4
MacBook Pro (15-inch, Mid 2010)
5
5
4
4
4
4
MacBook Pro (17-inch, Mid 2010)
5
5
4
4
4
4
MacBook Pro (13-inch, Mid 2009)
4
4
4
4
4
MacBook Pro (15-inch, 2.53 GHz, Mid 2009)
4
4
4
4
4
MacBook Pro (15-inch, Mid 2009)
4
4
4
4
4
MacBook Pro (17-inch, Mid 2009)
4
4
4
4
4
MacBook Pro (17-inch, Early 2009)
4
4
4
4
4
MacBook Pro (15-inch, Late 2008)
4
4
4
4
4
MacBook Pro (17-inch, Late 2008)
4
4
4
4
4
MacBook Pro (17-inch, Early 2008)
4
4
4
4
4
MacBook Pro (15-inch, Early 2008)
4
4
4
4
4
MacBook Pro (17-inch, 2.4 GHz)
4
4
4
MacBook Pro (15-inch, 2.4/2.2GHz)
4
4
4
MacBook Pro (15-inch, Core 2 Duo)
4
4
MacBook Pro (17-inch, Core 2 Duo)
4
4
MacBook Pro (17-inch)
4
4
MacBook Pro (15-inch, Glossy)
4
4

Install Windows 8 on macbook pro with external dvd drive

My superdrive have broken, anyone have experience installing windows 8 on macbook pro with external dvd drive?
Last night, I tried but end of with black screen.

Bguzryanto wrote:
the main point is 'anyone have exprerince install windows 8 with external dvd drive on macbook pro'
Purchase new superdrive, takes 2-3 weeks for shipping at my city.
It can't be done. If your computer has an internal optical drive, working or not, that is the drive you must use. Only computers such as the Macbook Pro Retina/Macbook Air that have no internal optical drive can install Windows from an external drive.

Windows Wista on Macbook

Similar Messages

Maybe you are looking for