Windows won't recognize inserted cd

I've installed Boot Camp and Windows XP on it. Everything seems to work OK, except Windows will not recognize an inserted CD.
The CD is in Windows format. It works fine on other Windows machines.
Any ideas as to what is causing this? The funny thing is, it recognized the CD long enough to install Windows in the first place.

Sorry about this, but... ME TOO!  (I'lll start my own thread if nothing comes of this one.)  Our circumstances are probably different.  Let's see:
My error is a late arrival as many CDs have been accessed until recently - last week or so - when my iMac 24" failed to recognise any CDs in Windows 7, Bootcamp or virtually via Fusion 3.  After getting it to work in virtual XP (a virtual-CD discovery thing: clicking on 'Specify physical DVD/CD drive') , I returned to virtual W7 and opening Windows Explorer.  Seeing no drive D: but hearing the drive whirring as a disk went in, I wrote D: in the Address Bar and it auto-completed with '\Half-life' (the CD in drive)!  When I tried to get it to run, a message appeared saying 'Windows can't find 'D:\Half-life'. Check the spelling...' and nothing came of it.  Drat.
I'll go back to Bootcamp once more and see if this behaviour is there too.

Similar Messages

  • Windows won't recognize Nano connecting.

    My genius friend decided to plug my iPod into his xbox 360, and now windows won't recognize my iPod Nano, and it won't turn on, and I don't know what to do.

    Try reading my post "Is your IPOD very slow to connect and eject and it appears to lock-up?". I think it is on page 2 of this discussion forum now.
    This worked for me and I've had emails from other people saying that this fixed their problem.
    Good luck,
    Ernie

  • Windows won't recognize 2nd ipod

    I have a 5th generation ipod which works perfect with windows and itunes. I purchased a Nano . I charged it up first then pluged it in the usb 2.0 port that I use with my other unit. Windows won't recognize it. I can not find it in My Computer. In the device manager it shows up under other devices with a yellow question mark.
    It claims it needs a driver and of course when I try the cd no I get one of those can't install hardware. I am using the latest versions of both software products.
    I did the 5 Rs and went through this site and the help documents and nothing works. I took it back to the Apple store and they said it was working perfect.
    So... I went home tried again, even disable my antivirus/firewall and no dice. I then tried it on my lap top and it installed and works fine. Where I am right now is copying what I wanted on one computer to CD and then importing the files ( sans song names) .
    I am baffled on this one. One unit works fine then the nano won't be recognized on the other. Suggestions?
    By a Creative?

    JAToubes: Windows can only handle one iPod connected at a time )http://docs.info.apple.com/article.html?artnum=61713) so make sure that your other iPod is disconnected first......you might need a re-boot before re-connecting given the yellow triangle warning.
    It might also be worth having a look at these other links...
    XP Eneregy Savings Disable USB Ports
    Windows confuses iPod with a network drive
    iPod missing in iTunes and or Windows, includes 5R's
    Post back on how you get on.

  • Windows won't recognize my iPod - USB device not recognized

    This is really frustrating. So I got a 4gb iPod nano on Saturday, took it home, set it up and everything was going just fine, no worry's. About 4 hours later I went to adjust my songs and it would not come up in iTunes. A little pop-up box said that the "USB device not recognized - one of the USB devices attached to this computer has malfunctioned and windows does not recognize it." After owning my iPod for less than an afternoon, I now have an ipod that I can do nothing to including change the music, charge it, etc. It works normally otherwise, it just won't connect to my computer. I then plugged in my older 256mb usb stick, and the same message, it too does not get recognized by windows. So I then tried a brand new 1gb usb stick that I had and the same result, not recognized by windows. I updated my itunes to the latest one after purchasing my ipod (version 7.4.3.1) and have looked up everything that I can and tried everything I saw to try, but nothing, absolutely nothing, worked. However my usb mouse, usb joystick, and usb printer all still work, but my moniter that has four usb outlets on it causes the same message, if I plug in the cable that connects one usb on my computer to the four on my moniter, windows can not recognize it. When I look in my device manager at the "unknown device" under the usb controller list it says that there is not driver for it, however I know that the drivers are either on my computer or built into windows. Any help? Anybody have an idea about what to do? Is it something in my windows registry has changed because of the new itunes, etc.?

    Now that I've had some sleep, I realise I didn't really provide information that may lead to some specific help. Here goes - when I first plugged in the ipod nano (8gb), It displayed the screen it was supposed to - I could see the lightning bolt through the battery icon and knew it was charging. The icon for the ipod also appeared in the left-hand listing in itunes (in the section that existed under Library, before the sections Store and Playlists). This section now does not appear (I can't remember the title of this section, but it might have been 'devices'). In fact, I'm pretty sure this problem started when I clicked on this icon - nothing happened and it disappeared - so did the display on the ipod, which is not just the apple. This means itunes has only Library, Store and Playlist in the left-hand colunm. While I accept that computers do not work on normal logic, this seems to me to indicate that the drivers are fine, the system is fine, my laptop is fine - its the ipod or the usb cord. This morning as I tried again, this time my laptop gave me the option to 'click on the balloon to solve the problem' - let me quote: "One of the USB devices attached to this computer has malfunctioned, and Windows does not recognise it. Try reconnecting the device. If Windows still does not recognise it, replace the device". Come on folks - one of you will surely know how to fix this (short of me taking the ipod back to the store to get my money back).

  • Won't recognize inserted disks

    The drive in my black MacBook won't recognize an inserted CD or DVD unless it's blank. If it's blank, it asks what I want to do, but if it's a data disc of any kind - for example, the Snow Leopard install DVD - the drive takes it but as far as the OS is concerned, there's no disc in the drive.
    Once I go to restart the computer, however, it sees the disk and mounts it.
    Any clues?

    Hi PWolves04, the fix bobapcoed described probably won't help you because your computer still "sees" your CD drive--it just doesn't read the disks you insert. The fix makes your computer see your drive again when it has completely disappeared from "My Computer". Speaking from personal experience (I've had to replace three CD/DVD-Rom drives over the years) one of the first signs that they're dying is the inability to recognize and read disks.
    If you want to try the "Fix" before you move onto other troubleshooting avenues, here is a link to one thread that discusses it:
    http://discussions.apple.com/thread.jspa?messageID=1457169?
    I recommend that you search the Importing and Burning Category for entries by "toonz" for more information if you really think this will help.

  • Ipod said it needs restored but Itunes or windows won't recognize

    I have an 80 gb classic and it said one day (after being fully charged) that it needed to be restored. So I plug it in and Itunes won't recognize it and windows shows it as a removeable disk but there's no info there either. I have the latest version of Itunes and have tried everything. I plugged my wifes 80 gb in and it syncs fine. I'm just hoping I don't have to get a new one. Any ideas would be helpful, thanks.

    hello there - I have a 160gb ipod classic and my itunes does not recognize my ipod at all and suddenley there is abou 100gb of "other" that just seems to of appeared since last synch
    can any one help
    i cannot restore because it does not recognize the ipod. my ipod shuffle is okay
    thanks

  • Apple creates Drivers but WINDOWS won't recognize them and doesn't let me install W7

    Hi dear Mac users,
    Boot Camp Assistant creates my drivers for me and I can place them either in a CD or a USB Disk.
    I start W7 installation and it ask me for MAC drivers, even thought I browse drivers location W7 won't recognize them.
    So i checked, most of the drivers are .exe, but W7 asks for the drivers long before the installation.
    (I have W7 Home Premium)
    So either I'm really really dumb or there's something wrong,
    Thx for your help,
    Alessandro

    Is it asking for Mac Boot Camp drivers OR  is it a generic Windows error asking for CD/DVD drivers?
    If it's asking for CD/DVD drivers then it seems there is an issue with burning a W7 .iso, etc, images onto a disk on the Mac side. The W7 installer has the basic drivers already for everything so it can start up on any machine, for some reason that part of the iso gets buggered up when burning a disk. (or maybe gets corrupted when downloaded?). It seems to work best at x1 or x2 speeds and you may have to try other brands of disks. If you know anyone with a Windows machine you can try that.
    Do a search for burning Windows 7 iso or something like that as there are quite a few post's about it.

  • Windows won't recognize ipod shuffle still !! Please Help

    Ok, I just got this thing from a work awards website, you know your work gives you points and you can buy things with them? Anyway my wife has a 20gb ipod, pretty cool, so I figure I'll get the shuffle cause she won't let me near her ipod. I get it last week try to set it up and nothing it can't be recognized by the computer. So I think maybe it's not getting fully seated in the USB port and go buy a docing station today, come home hook it up, same problem, the darn computer doesn't recognize it, nothing. So I see that there is an on-line chat support tool, I think very cool they can help me. I enter my S/N and it says it was purchased like 4 months ago, no support for me. So now I'm very agravated, I just got this thing, but because the awards place bought it a while ago I'm out the 90-day support. I've done everything in the FAQ's it's charged, I've reset it a thousand times, I've tried to reload the shuffle but windows doesn't recognize it so I can't. What really makes me mad is the 20gb ipod works fine. I read in here that when you see amber and green isn't good? Thats all I see when I turn it on and touch any button. What does this mean? someone help me here, please... I'm going nuts

    was having this problem among others. Found that I could see it in windows explorer but only as an additional disk but nothing in itunes. reformatted in windows, used updater then ejected from explorer. when fires up itunes and then reconnected ipod - it found it.

  • Computer says iPod is there, but iTunes and Windows won't recognize it

    I've had a 60GB ipod photo for about 4 years and it has served me well. This morning the iPod froze in the middle of a song. I hit reset, and it came back blank - all the files were gone. When I got to work and hooked it up to my computer, iTunes and Windows can't recognize it, but I can find it in device manager - which means I couldn't do restore.
    I hit reset a few more times, changed USB ports and, somewhat miraculously, the iPod came back, complete with all files. On the way home from work it happened again and I haven't been so lucky.
    I forced it into disk mode and iTunes recognized it, but told me it was corrupt. I also received a computer sound card error - my sound card was busy, and an error stating that audio/video playback could be limited. I tried restore, but I received the unknown error. I'm using the latest version of iTunes and I'm all out of ideas.
    Any suggestions or should I put this iPod to rest and save up to buy a new one?
    Thanks

    The most likely problem is that the hard drive in the iPod is becoming unreliable. It may be experiencing sticktion, which is friction that makes the spinning platter stick and the motor cannot get it spinning. The iPod is regularly spinning the hard drive up, to cache songs into memory, and then spinning it down, to save power. If the drive was not able to spin up when commanded (in the middle of a song), the iPod would seem to lock up. Later, bumping the iPod may make the hard drive spin again, so it seems to work again, at least for a while.
    If this the the problem, the only way to fix it would be to replace the hard drive inside.
    You might try reformatting the iPod using Windows, if you can get it to appear in a My Computer or Windows Explorer window. Use a full format instead of a quick format. If that process competes successfully, run iTunes and try using Restore again to install and initialize the iPod's software.
    If formatting does not compete successfully, it may be time for that new iPod.
    You can do some experimenting on the old iPod, if you're into such things. I have successfully installed a compact flash card (through an adapter), inside a 4th gen iPod as a replacement for the hard drive. It is only 4GB at the moment, but CF cards up to 16GB are getting relatively cheap, so I might get one of those and start using by old broken 4G iPod again, +now with shock-resistant energy-saving flash-based storage+.

  • Windows won't recognize removable storage devices

    I finally got Win XP loaded using VMwares Fusion. Windows works normally except that I cannot get it to find the external card reader for pictures, data, etc.
    The MAC finds it and puts it on the Mac desktop, but Windows doesn't recognize it.
    Any suggestions on how to get this external storage device to be displayed by Windows????

    Hello,
    Since Fusion is not an Apple product, and this forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Fusion, you should really consider posting issues with Fusion on VMWare's own forums, as they would be more focused on the issue than an Apple forum:
    http://communities.vmware.com/community/vmtn/desktop/fusion

  • Won't recognize inserted cd windows xp

    Many answers for this already - none work.  I got a new machine (Dell) with a GSA-H31N CD/DVD drive.  iTunes refuses to see an inserted CD, unless you insert the CD, then open iTunes.  Still have to tell it to import even though the setting is "import CD" when you insert a CD.  Need a solution as I'm not going to kill iTunes between each CD when I'm importing 10 CDs at a time.
    Please help.
    P.S.  Already tried updating drivers, etc.

    There must be a dozen variations in XP CDs and even some XP SP3s that install and overlay the entire hard drive -- all without asking!
    The OPTION (Alt) key works better than "C" on startup but that is another matter.
    If you have to buy, I'd skip on XP and go to 7.

  • HELP!: Windows won't recognize the CD drive on my mac!

    Hi, i have just installed Windows on my iMac intel Core duo using "Q", another emulator (it's free!) I need to install some Microsoft software (ex: Word, Encarta Encyclopedia) on the Windows disk. It doesn't recognize the CD drive; I went to
    My Computer > CD Drive(E:)
    It says "Please insert a disk into Drive E:."
    What do I do? I also have the Mac Drives disk to install as well.
    Thanks in advance. =]
    iMac Intel Core Duo 17" Mac OS X (10.4.7)

    Hi, i have just installed Windows on my iMac intel Core duo using "Q", another emulator (it's free!) I need to install some Microsoft software (ex: Word, Encarta Encyclopedia) on the Windows disk. It doesn't recognize the CD drive; I went to
    My Computer > CD Drive(E:)
    It says "Please insert a disk into Drive E:."
    What do I do? I also have the Mac Drives disk to install as well.
    Thanks in advance. =]
    iMac Intel Core Duo 17" Mac OS X (10.4.7)

  • Windows won't recognize 5th gen

    yes.. I know there are atleast 3 topics about this already, but none of them quite dealt with my problem...:
    My computer (Windows) has only recognized my iPod once. I put all my songs on it, and they all play fine. Long story short, my computer crashed, I got a new one, and now nothing on my computer will recognize the iPod. It won't even give me a message of something being corrupt. It's like nothing's even there. I've redownloaded iTunes from the cd, put the latest Updater on... none of it sees that it's connected. I've tried plugging it into different USB ports, resetting, and I even had Apple send me a new cable. Anyone got any ideas?
      Windows XP Pro  

    yeah, i read that somewhere when i was looking for answers. the problem with that is that only my C: drive is there... my computer doesn't even see that it's connected. thanks for the advice though.
    i just keep looking at the iPod, and i don't understand how it can charge through the computer, but yet it won't be recognized. ugh, i don't even know where to begin. any advice or links to threads anyone think might help would be much appreciated.

  • Updater freezes, windows won't recognize i-pod

    My i-pod went a bit odd last night. Windows XP wouldn't pick it up, so I tried running the latest updater. That seemed to run OK but then froze halfway through, so I had to manually disconnect the i-pod. Now my i-pod won't get picked up by my PC - Windows seems to pick it up as a USB device but I can't access it. I tried to run the updater again, but now it just freezes at initialising. So far, I have tried:
    - connecting my husbands i-pod mini to the PC (it works fine),
    - connecting my i-pod to my work PC (still have same problem),
    - removing and reinstalling both i-tunes and the i-pod updater
    Ther i-pod seems OK, as there is still the menu options and no error icons, but everytime I connect it to the PC, my PC slows down, the i-pod isn't picked up in i-tunes, although it is listed as a USB device in the "My Computer" list. A colleague of mine is going to try and running on his i-book tonight and see if he can get it to work. If not, any ideas? Please!
    Nano   Windows XP Pro  

    I have EXACTLY the same problem! So my computer crashed... Now I bought a brand brand new (better) one (Acer Aspire E360 with Windows XP). Like suggested, I downloaded the Updater 1.2. When I started the Updater, I got an error message, and now iTunes doesn't recognize my iPod anymore!!! All that happened was that all files are erased from my iPod and all I get is a message on the iPod: Do not disconnect. This is even worse!!!!!!
    HHHEEEEEEEEEEEEEELLLLLLLLLLLLLLPPPPPPPPPPPPPPPP!!!!!!!!!

  • Windows won't recognize Zen Micro

    I hadn?t updated my Zen?s firmware for long time ago. Then came this ?Plays-for-Surefeature. I think the name won?t fit the bill at all. Suddenly, on the half way of the update, the software crashed and I HAD to restart my Zen since there wasn?t any progress for a very long time.
    Now to the actual problem. When I connect my Zen to PC it says that Plays-for-Sure device has been recognized, but when I go ahead, both Windows Media Player and updated Winamp player (also supporting this feature), won?t recognize it. When I try to update the firmware again, it does the same thing: saying my player isn?t connected. I think I?m very disappointed with the updating thing. I have had this player only for a bit more than a year, so the warranty has also come to an end. Could anybody suggest me what could I do?

    [size="4" color="#330000">Heres the thing. my zen micro was giving me troubles i.e it was pausing on the creative logo and never turned on .so i got the firmware update and it worked fine.[color="#ffff00">[color="#330000">Then i had to use windows media player because the creative media organizer doesnt recognize it and it is apparently an MTP media player. Then i tried updating the firmware again because it was freezing on the creative screen as before only this time because of the zen micro having the newest update the firmware installation doesnt recognize my zen[color="#330000"> an[color="#330000">d it [size="4" color="#330000">Says that windows media player has encountered an unknown error . This meant however that my zen now has NO firmware on it,the firmware update doesnt recognize it and it is not detectable by creative media organizer so i am unable to use it after paying ?40 for the dam thing

Maybe you are looking for